blob: 4c874367fd2db8a84caafaf8623732d7a5df731f [file] [log] [blame]
Walter Schweizera0a868b2016-10-06 23:29:56 +02001/*
2 * (C) Copyright 2011
3 * Jason Cooper <u-boot@lakedaemon.net>
4 *
5 * Based on work by:
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef _CONFIG_DS109_H
13#define _CONFIG_DS109_H
14
Tom Rinicd7b6342017-01-25 20:42:38 -050015/* Provide the MACH_TYPE value that the vendor kernel requires. */
16#define CONFIG_MACH_TYPE 527
Walter Schweizera0a868b2016-10-06 23:29:56 +020017
18/*
19 * High Level Configuration Options (easy to change)
20 */
21#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
Walter Schweizera0a868b2016-10-06 23:29:56 +020022
23/*
24 * Commands configuration
25 */
26#define CONFIG_CMD_EXT2
27#define CONFIG_CMD_FAT
28
29/*
30 * mv-plug-common.h should be defined after CMD configs since it used them
31 * to enable certain macros
32 */
33#include "mv-plug-common.h"
34
35/*
36 * Environment variables configurations
37 */
38#ifdef CONFIG_SPI_FLASH
39#define CONFIG_ENV_IS_IN_SPI_FLASH 1
40#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
41#else
42#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
43#endif
44
45#ifdef CONFIG_CMD_SF
46#define CONFIG_HARD_SPI 1
47#define CONFIG_KIRKWOOD_SPI 1
48#define CONFIG_ENV_SPI_BUS 0
49#define CONFIG_ENV_SPI_CS 0
50#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
51#endif
52
53/*
54 * max 4k env size is enough, but in case of nand
55 * it has to be rounded to sector size
56 */
57#define CONFIG_ENV_SIZE 0x10000
58#define CONFIG_ENV_ADDR 0x3d0000
59#define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */
60
61/*
62 * Default environment variables
63 */
64#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
65 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
66 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
67 "bootm 0x6400000;"
68
69#define CONFIG_EXTRA_ENV_SETTINGS \
70 "x_bootcmd_ethernet=ping 192.168.1.2\0" \
71 "x_bootcmd_usb=usb start\0" \
72 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
73 "x_bootargs=console=ttyS0,115200\0" \
74 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
75 "ipaddr=192.168.1.5\0"
76
77/*
78 * Ethernet Driver configuration
79 */
80#ifdef CONFIG_CMD_NET
81#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
82#define CONFIG_PHY_BASE_ADR 8
83#endif /* CONFIG_CMD_NET */
84
85/*
86 * SATA Driver configuration
87 */
88#ifdef CONFIG_MVSATA_IDE
89#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
90#endif /*CONFIG_MVSATA_IDE*/
91
92#endif /* _CONFIG_DS109_H */