Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * (C) Copyright 2020 |
| 4 | * Arthur Li, Cortina Access, arthur.li@cortina-access.com. |
| 5 | */ |
| 6 | |
Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 7 | #include <i2c.h> |
| 8 | #include <log.h> |
| 9 | #include <asm/io.h> |
| 10 | #include <dm.h> |
| 11 | #include <mapmem.h> |
Tom Rini | 03de305 | 2024-05-20 13:35:03 -0600 | [diff] [blame] | 12 | #include <time.h> |
Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 13 | #include "i2c-cortina.h" |
| 14 | |
| 15 | static void set_speed(struct i2c_regs *regs, int i2c_spd) |
| 16 | { |
| 17 | union ca_biw_cfg i2c_cfg; |
| 18 | |
| 19 | i2c_cfg.wrd = readl(®s->i2c_cfg); |
| 20 | i2c_cfg.bf.core_en = 0; |
| 21 | writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| 22 | |
| 23 | switch (i2c_spd) { |
| 24 | case IC_SPEED_MODE_FAST_PLUS: |
| 25 | i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| 26 | (5 * I2C_SPEED_FAST_PLUS_RATE) - 1; |
| 27 | break; |
| 28 | |
| 29 | case IC_SPEED_MODE_STANDARD: |
| 30 | i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| 31 | (5 * I2C_SPEED_STANDARD_RATE) - 1; |
| 32 | break; |
| 33 | |
| 34 | case IC_SPEED_MODE_FAST: |
| 35 | default: |
| 36 | i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| 37 | (5 * I2C_SPEED_FAST_RATE) - 1; |
| 38 | break; |
| 39 | } |
| 40 | |
| 41 | i2c_cfg.bf.core_en = 1; |
| 42 | writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| 43 | } |
| 44 | |
| 45 | static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| 46 | { |
| 47 | struct ca_i2c *priv = dev_get_priv(bus); |
| 48 | int i2c_spd; |
| 49 | |
| 50 | if (speed >= I2C_SPEED_FAST_PLUS_RATE) { |
| 51 | i2c_spd = IC_SPEED_MODE_FAST_PLUS; |
| 52 | priv->speed = I2C_SPEED_FAST_PLUS_RATE; |
| 53 | } else if (speed >= I2C_SPEED_FAST_RATE) { |
| 54 | i2c_spd = IC_SPEED_MODE_FAST; |
| 55 | priv->speed = I2C_SPEED_FAST_RATE; |
| 56 | } else { |
| 57 | i2c_spd = IC_SPEED_MODE_STANDARD; |
| 58 | priv->speed = I2C_SPEED_STANDARD_RATE; |
| 59 | } |
| 60 | |
| 61 | set_speed(priv->regs, i2c_spd); |
| 62 | |
| 63 | return 0; |
| 64 | } |
| 65 | |
| 66 | static int ca_i2c_get_bus_speed(struct udevice *bus) |
| 67 | { |
| 68 | struct ca_i2c *priv = dev_get_priv(bus); |
| 69 | |
| 70 | return priv->speed; |
| 71 | } |
| 72 | |
| 73 | static void ca_i2c_init(struct i2c_regs *regs) |
| 74 | { |
| 75 | union ca_biw_cfg i2c_cfg; |
| 76 | |
| 77 | i2c_cfg.wrd = readl(®s->i2c_cfg); |
| 78 | i2c_cfg.bf.core_en = 0; |
| 79 | i2c_cfg.bf.biw_soft_reset = 1; |
| 80 | writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| 81 | mdelay(10); |
| 82 | i2c_cfg.bf.biw_soft_reset = 0; |
| 83 | writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| 84 | |
| 85 | set_speed(regs, IC_SPEED_MODE_STANDARD); |
| 86 | |
| 87 | i2c_cfg.wrd = readl(®s->i2c_cfg); |
| 88 | i2c_cfg.bf.core_en = 1; |
| 89 | writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| 90 | } |
| 91 | |
| 92 | static int i2c_wait_complete(struct i2c_regs *regs) |
| 93 | { |
| 94 | union ca_biw_ctrl i2c_ctrl; |
| 95 | unsigned long start_time_bb = get_timer(0); |
| 96 | |
| 97 | i2c_ctrl.wrd = readl(®s->i2c_ctrl); |
| 98 | |
| 99 | while (i2c_ctrl.bf.biwdone == 0) { |
| 100 | i2c_ctrl.wrd = readl(®s->i2c_ctrl); |
| 101 | |
| 102 | if (get_timer(start_time_bb) > |
| 103 | (unsigned long)(I2C_BYTE_TO_BB)) { |
| 104 | printf("%s not done!!!\n", __func__); |
| 105 | return -ETIMEDOUT; |
| 106 | } |
| 107 | } |
| 108 | |
| 109 | /* Clear done bit */ |
| 110 | writel(i2c_ctrl.wrd, ®s->i2c_ctrl); |
| 111 | |
| 112 | return 0; |
| 113 | } |
| 114 | |
| 115 | static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr, |
| 116 | int write_read) |
| 117 | { |
| 118 | writel(i2c_addr | write_read, ®s->i2c_txr); |
| 119 | |
| 120 | writel(BIW_CTRL_START | BIW_CTRL_WRITE, |
| 121 | ®s->i2c_ctrl); |
| 122 | |
| 123 | i2c_wait_complete(regs); |
| 124 | } |
| 125 | |
| 126 | static int i2c_wait_for_bus_busy(struct i2c_regs *regs) |
| 127 | { |
| 128 | union ca_biw_ack i2c_ack; |
| 129 | unsigned long start_time_bb = get_timer(0); |
| 130 | |
| 131 | i2c_ack.wrd = readl(®s->i2c_ack); |
| 132 | |
| 133 | while (i2c_ack.bf.biw_busy) { |
| 134 | i2c_ack.wrd = readl(®s->i2c_ack); |
| 135 | |
| 136 | if (get_timer(start_time_bb) > |
| 137 | (unsigned long)(I2C_BYTE_TO_BB)) { |
| 138 | printf("%s: timeout!\n", __func__); |
| 139 | return -ETIMEDOUT; |
| 140 | } |
| 141 | } |
| 142 | |
| 143 | return 0; |
| 144 | } |
| 145 | |
| 146 | static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr, |
| 147 | int alen, int write_read) |
| 148 | { |
| 149 | int addr_len = alen; |
| 150 | |
| 151 | if (i2c_wait_for_bus_busy(regs)) |
| 152 | return 1; |
| 153 | |
| 154 | /* First cycle must write addr + offset */ |
| 155 | chip = ((chip & 0x7F) << 1); |
| 156 | if (alen == 0 && write_read == I2C_CMD_RD) |
| 157 | i2c_setaddress(regs, chip, I2C_CMD_RD); |
| 158 | else |
| 159 | i2c_setaddress(regs, chip, I2C_CMD_WT); |
| 160 | |
| 161 | while (alen) { |
| 162 | alen--; |
| 163 | writel(addr, ®s->i2c_txr); |
| 164 | if (write_read == I2C_CMD_RD) |
| 165 | writel(BIW_CTRL_WRITE | BIW_CTRL_STOP, |
| 166 | ®s->i2c_ctrl); |
| 167 | else |
| 168 | writel(BIW_CTRL_WRITE, ®s->i2c_ctrl); |
| 169 | i2c_wait_complete(regs); |
| 170 | } |
| 171 | |
| 172 | /* Send address again with Read flag if it's read command */ |
| 173 | if (write_read == I2C_CMD_RD && addr_len > 0) |
| 174 | i2c_setaddress(regs, chip, I2C_CMD_RD); |
| 175 | |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | static int i2c_xfer_finish(struct i2c_regs *regs) |
| 180 | { |
| 181 | /* Dummy read makes bus free */ |
| 182 | writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl); |
| 183 | i2c_wait_complete(regs); |
| 184 | |
| 185 | if (i2c_wait_for_bus_busy(regs)) { |
| 186 | printf("Timed out waiting for bus\n"); |
| 187 | return -ETIMEDOUT; |
| 188 | } |
| 189 | |
| 190 | return 0; |
| 191 | } |
| 192 | |
| 193 | static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr, |
| 194 | int alen, uint8_t *buffer, int len) |
| 195 | { |
| 196 | unsigned long start_time_rx; |
| 197 | int rc = 0; |
| 198 | |
| 199 | rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD); |
| 200 | if (rc) |
| 201 | return rc; |
| 202 | |
| 203 | start_time_rx = get_timer(0); |
| 204 | while (len) { |
| 205 | /* ACK_IN is ack value to send during read. |
| 206 | * ack high only on the very last byte! |
| 207 | */ |
| 208 | if (len == 1) |
| 209 | writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP, |
| 210 | ®s->i2c_ctrl); |
| 211 | else |
| 212 | writel(BIW_CTRL_READ, ®s->i2c_ctrl); |
| 213 | |
| 214 | rc = i2c_wait_complete(regs); |
| 215 | udelay(1); |
| 216 | |
| 217 | if (rc == 0) { |
| 218 | *buffer++ = |
| 219 | (uchar) readl(®s->i2c_rxr); |
| 220 | len--; |
| 221 | start_time_rx = get_timer(0); |
| 222 | |
| 223 | } else if (get_timer(start_time_rx) > I2C_BYTE_TO) { |
| 224 | return -ETIMEDOUT; |
| 225 | } |
| 226 | } |
| 227 | i2c_xfer_finish(regs); |
| 228 | return rc; |
| 229 | } |
| 230 | |
| 231 | static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr, |
| 232 | int alen, uint8_t *buffer, int len) |
| 233 | { |
| 234 | int rc, nb = len; |
| 235 | unsigned long start_time_tx; |
| 236 | |
| 237 | rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT); |
| 238 | if (rc) |
| 239 | return rc; |
| 240 | |
| 241 | start_time_tx = get_timer(0); |
| 242 | while (len) { |
| 243 | writel(*buffer, ®s->i2c_txr); |
| 244 | if (len == 1) |
| 245 | writel(BIW_CTRL_WRITE | BIW_CTRL_STOP, |
| 246 | ®s->i2c_ctrl); |
| 247 | else |
| 248 | writel(BIW_CTRL_WRITE, ®s->i2c_ctrl); |
| 249 | |
| 250 | rc = i2c_wait_complete(regs); |
| 251 | |
| 252 | if (rc == 0) { |
| 253 | len--; |
| 254 | buffer++; |
| 255 | start_time_tx = get_timer(0); |
| 256 | } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) { |
| 257 | return -ETIMEDOUT; |
| 258 | } |
| 259 | } |
| 260 | |
| 261 | return 0; |
| 262 | } |
| 263 | |
| 264 | static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr, |
| 265 | uint chip_flags) |
| 266 | { |
| 267 | struct ca_i2c *priv = dev_get_priv(bus); |
| 268 | int ret; |
| 269 | u32 tmp; |
| 270 | |
| 271 | /* Try to read the first location of the chip */ |
| 272 | ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1); |
| 273 | if (ret) |
| 274 | ca_i2c_init(priv->regs); |
| 275 | |
| 276 | return ret; |
| 277 | } |
| 278 | |
| 279 | static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) |
| 280 | { |
| 281 | struct ca_i2c *priv = dev_get_priv(bus); |
| 282 | int ret; |
| 283 | |
| 284 | debug("i2c_xfer: %d messages\n", nmsgs); |
| 285 | for (; nmsgs > 0; nmsgs--, msg++) { |
| 286 | debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); |
| 287 | if (msg->flags & I2C_M_RD) |
| 288 | ret = ca_i2c_read(priv->regs, msg->addr, 0, 0, |
| 289 | msg->buf, msg->len); |
| 290 | else |
| 291 | ret = ca_i2c_write(priv->regs, msg->addr, 0, 0, |
| 292 | msg->buf, msg->len); |
| 293 | |
| 294 | if (ret) { |
| 295 | printf("i2c_xfer: %s error\n", |
| 296 | msg->flags & I2C_M_RD ? "read" : "write"); |
| 297 | return ret; |
| 298 | } |
| 299 | } |
| 300 | |
| 301 | return 0; |
| 302 | } |
| 303 | |
| 304 | static const struct dm_i2c_ops ca_i2c_ops = { |
| 305 | .xfer = ca_i2c_xfer, |
| 306 | .probe_chip = ca_i2c_probe_chip, |
| 307 | .set_bus_speed = ca_i2c_set_bus_speed, |
| 308 | .get_bus_speed = ca_i2c_get_bus_speed, |
| 309 | }; |
| 310 | |
| 311 | static const struct udevice_id ca_i2c_ids[] = { |
| 312 | { .compatible = "cortina,ca-i2c", }, |
| 313 | { } |
| 314 | }; |
| 315 | |
| 316 | static int ca_i2c_probe(struct udevice *bus) |
| 317 | { |
| 318 | struct ca_i2c *priv = dev_get_priv(bus); |
| 319 | |
| 320 | ca_i2c_init(priv->regs); |
| 321 | |
| 322 | return 0; |
| 323 | } |
| 324 | |
Simon Glass | d1998a9 | 2020-12-03 16:55:21 -0700 | [diff] [blame] | 325 | static int ca_i2c_of_to_plat(struct udevice *bus) |
Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 326 | { |
| 327 | struct ca_i2c *priv = dev_get_priv(bus); |
| 328 | |
| 329 | priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs)); |
| 330 | if (!priv->regs) { |
| 331 | printf("I2C: base address is invalid\n"); |
| 332 | return -EINVAL; |
| 333 | } |
| 334 | |
| 335 | return 0; |
| 336 | } |
| 337 | |
| 338 | U_BOOT_DRIVER(i2c_cortina) = { |
| 339 | .name = "i2c_cortina", |
| 340 | .id = UCLASS_I2C, |
| 341 | .of_match = ca_i2c_ids, |
Simon Glass | d1998a9 | 2020-12-03 16:55:21 -0700 | [diff] [blame] | 342 | .of_to_plat = ca_i2c_of_to_plat, |
Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 343 | .probe = ca_i2c_probe, |
Simon Glass | 41575d8 | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 344 | .priv_auto = sizeof(struct ca_i2c), |
Arthur Li | 7f5ea25 | 2020-06-01 12:56:31 -0700 | [diff] [blame] | 345 | .ops = &ca_i2c_ops, |
| 346 | .flags = DM_FLAG_PRE_RELOC, |
| 347 | }; |