blob: 76e19918aadc794d7c1da3de7136ede74084eed0 [file] [log] [blame]
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +09001#
2# I2C subsystem configuration
3#
4
Simon Glass59e11eb2021-07-10 21:14:35 -06005menuconfig I2C
6 bool "I2C support"
7 default y
8 help
9 Note:
10 This is a stand-in for an option to enable I2C support. In fact this
11 simply enables building of the I2C directory for U-Boot. The actual
12 I2C feature is enabled by DM_I2C (for driver model) and
13 the #define CONFIG_SYS_I2C_LEGACY (for the legacy I2C stack).
14
15 So at present there is no need to ever disable this option.
16
17 Eventually it will:
18
19 Enable support for the I2C (Inter-Integrated Circuit) bus in U-Boot.
20 I2C works with a clock and data line which can be driven by a
21 one or more masters or slaves. It is a fairly complex bus but is
22 widely used as it only needs two lines for communication. Speeds of
23 400kbps are typical but up to 3.4Mbps is supported by some
24 hardware. Enable this option to build the drivers in drivers/i2c as
25 part of a U-Boot build.
26
27if I2C
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +090028
Masahiro Yamadab6036bc2015-01-13 12:44:35 +090029config DM_I2C
30 bool "Enable Driver Model for I2C drivers"
31 depends on DM
32 help
Przemyslaw Marczak705fcf42015-03-31 18:57:17 +020033 Enable driver model for I2C. The I2C uclass interface: probe, read,
34 write and speed, is implemented with the bus drivers operations,
35 which provide methods for bus setting and data transfer. Each chip
Simon Glasscaa4daa2020-12-03 16:55:18 -070036 device (bus child) info is kept as parent plat. The interface
Bartosz Golaszewskie3114822019-07-29 08:58:00 +020037 is defined in include/i2c.h.
Simon Glass4bba9d32015-02-13 12:20:48 -070038
Igor Opaniukd1f3abe2021-02-09 13:52:43 +020039config SPL_DM_I2C
40 bool "Enable Driver Model for I2C drivers in SPL"
41 depends on SPL_DM && DM_I2C
42 default y
43 help
44 Enable driver model for I2C. The I2C uclass interface: probe, read,
45 write and speed, is implemented with the bus drivers operations,
46 which provide methods for bus setting and data transfer. Each chip
47 device (bus child) info is kept as parent platdata. The interface
48 is defined in include/i2c.h.
49
Simon Glass747093d2022-04-30 00:56:53 -060050config VPL_DM_I2C
51 bool "Enable Driver Model for I2C drivers in VPL"
52 depends on VPL_DM && DM_I2C
53 default y
54 help
55 Enable driver model for I2C. The I2C uclass interface: probe, read,
56 write and speed, is implemented with the bus drivers operations,
57 which provide methods for bus setting and data transfer. Each chip
58 device (bus child) info is kept as parent platdata. The interface
59 is defined in include/i2c.h.
60
Tom Rini55dabcc2021-08-18 23:12:24 -040061config SYS_I2C_LEGACY
62 bool "Enable legacy I2C subsystem and drivers"
63 depends on !DM_I2C
64 help
65 Enable the legacy I2C subsystem and drivers. While this is
66 deprecated in U-Boot itself, this can be useful in some situations
67 in SPL or TPL.
68
69config SPL_SYS_I2C_LEGACY
70 bool "Enable legacy I2C subsystem and drivers in SPL"
71 depends on SUPPORT_SPL && !SPL_DM_I2C
72 help
73 Enable the legacy I2C subsystem and drivers in SPL. This is useful
74 in some size constrained situations.
75
76config TPL_SYS_I2C_LEGACY
77 bool "Enable legacy I2C subsystem and drivers in TPL"
78 depends on SUPPORT_TPL && !SPL_DM_I2C
79 help
80 Enable the legacy I2C subsystem and drivers in TPL. This is useful
81 in some size constrained situations.
82
Tom Rini52c7e372021-08-18 23:12:25 -040083config SYS_I2C_EARLY_INIT
84 bool "Enable legacy I2C subsystem early in boot"
85 depends on BOARD_EARLY_INIT_F && SPL_SYS_I2C_LEGACY && SYS_I2C_MXC
86 help
87 Add the function prototype for i2c_early_init_f which is called in
88 board_early_init_f.
89
Simon Glasscc456bd2015-08-03 08:19:23 -060090config I2C_CROS_EC_TUNNEL
91 tristate "Chrome OS EC tunnel I2C bus"
92 depends on CROS_EC
93 help
94 This provides an I2C bus that will tunnel i2c commands through to
95 the other side of the Chrome OS EC to the I2C bus connected there.
96 This will work whatever the interface used to talk to the EC (SPI,
97 I2C or LPC). Some Chromebooks use this when the hardware design
98 does not allow direct access to the main PMIC from the AP.
99
Simon Glassf48eaf02015-08-03 08:19:24 -0600100config I2C_CROS_EC_LDO
101 bool "Provide access to LDOs on the Chrome OS EC"
102 depends on CROS_EC
103 ---help---
104 On many Chromebooks the main PMIC is inaccessible to the AP. This is
105 often dealt with by using an I2C pass-through interface provided by
106 the EC. On some unfortunate models (e.g. Spring) the pass-through
107 is not available, and an LDO message is available instead. This
108 option enables a driver which provides very basic access to those
109 regulators, via the EC. We implement this as an I2C bus which
110 emulates just the TPS65090 messages we know about. This is done to
111 avoid duplicating the logic in the TPS65090 regulator driver for
112 enabling/disabling an LDO.
Simon Glasscc456bd2015-08-03 08:19:23 -0600113
Lukasz Majewskie46f8a32017-03-21 12:08:25 +0100114config I2C_SET_DEFAULT_BUS_NUM
115 bool "Set default I2C bus number"
116 depends on DM_I2C
117 help
118 Set default number of I2C bus to be accessed. This option provides
119 behaviour similar to old (i.e. pre DM) I2C bus driver.
120
121config I2C_DEFAULT_BUS_NUMBER
122 hex "I2C default bus number"
123 depends on I2C_SET_DEFAULT_BUS_NUM
124 default 0x0
125 help
126 Number of default I2C bus to use
127
Przemyslaw Marczakc54473c2015-03-31 18:57:18 +0200128config DM_I2C_GPIO
129 bool "Enable Driver Model for software emulated I2C bus driver"
130 depends on DM_I2C && DM_GPIO
131 help
132 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
133 configuration is given by the device tree. Kernel-style device tree
134 bindings are supported.
135 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
136
Igor Opaniukd1f3abe2021-02-09 13:52:43 +0200137config SPL_DM_I2C_GPIO
138 bool "Enable Driver Model for software emulated I2C bus driver in SPL"
Simon Glass83061db2021-07-10 21:14:30 -0600139 depends on SPL_DM && DM_I2C_GPIO && SPL_DM_GPIO && SPL_GPIO
Igor Opaniukd1f3abe2021-02-09 13:52:43 +0200140 default y
141 help
142 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
143 configuration is given by the device tree. Kernel-style device tree
144 bindings are supported.
145 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
146
Songjun Wu8800e0f2016-06-20 13:22:38 +0800147config SYS_I2C_AT91
148 bool "Atmel I2C driver"
149 depends on DM_I2C && ARCH_AT91
150 help
151 Add support for the Atmel I2C driver. A serious problem is that there
152 is no documented way to issue repeated START conditions for more than
153 two messages, as needed to support combined I2C messages. Use the
154 i2c-gpio driver unless your system can cope with this limitation.
155 Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
156
Rayagonda Kokatanur956d57a2020-04-08 11:12:27 +0530157config SYS_I2C_IPROC
158 bool "Broadcom I2C driver"
159 depends on DM_I2C
160 help
161 Broadcom I2C driver.
162 Add support for Broadcom I2C driver.
163 Say yes here to to enable the Broadco I2C driver.
164
mario.six@gdsys.ccdbc82ce2016-04-25 08:31:09 +0200165config SYS_I2C_FSL
166 bool "Freescale I2C bus driver"
mario.six@gdsys.ccdbc82ce2016-04-25 08:31:09 +0200167 help
168 Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
169 MPC85xx processors.
170
Tom Rini6d5d0c92021-08-18 23:12:35 -0400171if SYS_I2C_FSL && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
172config SYS_FSL_I2C_OFFSET
173 hex "Offset from the IMMR of the address of the first I2C controller"
174
175config SYS_FSL_HAS_I2C2_OFFSET
176 bool "Support a second I2C controller"
177
178config SYS_FSL_I2C2_OFFSET
179 hex "Offset from the IMMR of the address of the second I2C controller"
180 depends on SYS_FSL_HAS_I2C2_OFFSET
181
182config SYS_FSL_HAS_I2C3_OFFSET
183 bool "Support a third I2C controller"
184
185config SYS_FSL_I2C3_OFFSET
186 hex "Offset from the IMMR of the address of the third I2C controller"
187 depends on SYS_FSL_HAS_I2C3_OFFSET
188
189config SYS_FSL_HAS_I2C4_OFFSET
190 bool "Support a fourth I2C controller"
191
192config SYS_FSL_I2C4_OFFSET
193 hex "Offset from the IMMR of the address of the fourth I2C controller"
194 depends on SYS_FSL_HAS_I2C4_OFFSET
195endif
196
Moritz Fischerfdec2d22015-12-28 09:47:11 -0800197config SYS_I2C_CADENCE
198 tristate "Cadence I2C Controller"
Michal Simek664e16c2020-08-06 15:18:36 +0200199 depends on DM_I2C
Moritz Fischerfdec2d22015-12-28 09:47:11 -0800200 help
201 Say yes here to select Cadence I2C Host Controller. This controller is
202 e.g. used by Xilinx Zynq.
203
Arthur Li7f5ea252020-06-01 12:56:31 -0700204config SYS_I2C_CA
205 tristate "Cortina-Access I2C Controller"
206 depends on DM_I2C && CORTINA_PLATFORM
Arthur Li7f5ea252020-06-01 12:56:31 -0700207 help
208 Add support for the Cortina Access I2C host controller.
209 Say yes here to select Cortina-Access I2C Host Controller.
210
Adam Ford9f8cf762018-08-10 05:05:22 -0500211config SYS_I2C_DAVINCI
212 bool "Davinci I2C Controller"
213 depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
214 help
215 Say yes here to add support for Davinci and Keystone I2C controller
216
Stefan Roesee32d0db2016-04-28 09:47:17 +0200217config SYS_I2C_DW
218 bool "Designware I2C Controller"
Stefan Roesee32d0db2016-04-28 09:47:17 +0200219 help
220 Say yes here to select the Designware I2C Host Controller. This
221 controller is used in various SoCs, e.g. the ST SPEAr, Altera
222 SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
223
maxims@google.com4dc038f2017-04-17 12:00:30 -0700224config SYS_I2C_ASPEED
225 bool "Aspeed I2C Controller"
226 depends on DM_I2C && ARCH_ASPEED
227 help
228 Say yes here to select Aspeed I2C Host Controller. The driver
229 supports AST2500 and AST2400 controllers, but is very limited.
230 Only single master mode is supported and only byte-by-byte
231 synchronous reads and writes are supported, no Pool Buffers or DMA.
232
Simon Glassabb0b012016-01-17 16:11:44 -0700233config SYS_I2C_INTEL
234 bool "Intel I2C/SMBUS driver"
235 depends on DM_I2C
236 help
237 Add support for the Intel SMBUS driver. So far this driver is just
238 a stub which perhaps some basic init. There is no implementation of
239 the I2C API meaning that any I2C operations will immediately fail
240 for now.
241
Peng Fan7ee3f142017-02-24 09:54:18 +0800242config SYS_I2C_IMX_LPI2C
243 bool "NXP i.MX LPI2C driver"
Peng Fan7ee3f142017-02-24 09:54:18 +0800244 help
245 Add support for the NXP i.MX LPI2C driver.
246
Trevor Woerner07055562021-06-10 22:37:08 -0400247config SYS_I2C_LPC32XX
248 bool "LPC32XX I2C driver"
249 depends on ARCH_LPC32XX
250 help
251 Enable support for the LPC32xx I2C driver.
252
Beniamino Galvanif8d9ca12017-10-29 10:09:00 +0100253config SYS_I2C_MESON
254 bool "Amlogic Meson I2C driver"
255 depends on DM_I2C && ARCH_MESON
256 help
Beniamino Galvani4ecbb8b2017-11-26 17:40:54 +0100257 Add support for the I2C controller available in Amlogic Meson
258 SoCs. The controller supports programmable bus speed including
259 standard (100kbits/s) and fast (400kbit/s) speed and allows the
260 software to define a flexible format of the bit streams. It has an
261 internal buffer holding up to 8 bytes for transfers and supports
262 both 7-bit and 10-bit addresses.
Beniamino Galvanif8d9ca12017-10-29 10:09:00 +0100263
Weijie Gao9ad71f62022-09-09 19:59:48 +0800264config SYS_I2C_MTK
265 bool "MediaTek I2C driver"
266 help
267 This selects the MediaTek Integrated Inter Circuit bus driver.
268 The I2C bus adapter is the base for some other I2C client,
269 eg: touch, sensors.
270 If you want to use MediaTek I2C interface, say Y here.
271 If unsure, say N.
272
Padmarao Begari0dc0d1e2021-11-17 18:21:16 +0530273config SYS_I2C_MICROCHIP
274 bool "Microchip I2C driver"
275 help
276 Add support for the Microchip I2C driver. This is operating on
277 standard mode up to 100 kbits/s and fast mode up to 400 kbits/s.
278
Jagan Teki72c8c102016-12-06 00:00:57 +0100279config SYS_I2C_MXC
Sriram Dash942ecc82018-02-06 11:26:30 +0530280 bool "NXP MXC I2C driver"
Jagan Teki72c8c102016-12-06 00:00:57 +0100281 help
Chris Packham74751452019-01-13 22:13:25 +1300282 Add support for the NXP I2C driver. This supports up to four bus
283 channels and operating on standard mode up to 100 kbits/s and fast
284 mode up to 400 kbits/s.
Jagan Teki72c8c102016-12-06 00:00:57 +0100285
Tom Rini15e7b762021-08-18 23:12:33 -0400286if SYS_I2C_MXC && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
Sriram Dash942ecc82018-02-06 11:26:30 +0530287config SYS_I2C_MXC_I2C1
288 bool "NXP MXC I2C1"
289 help
290 Add support for NXP MXC I2C Controller 1.
291 Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
292
293config SYS_I2C_MXC_I2C2
294 bool "NXP MXC I2C2"
295 help
296 Add support for NXP MXC I2C Controller 2.
297 Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
298
299config SYS_I2C_MXC_I2C3
300 bool "NXP MXC I2C3"
301 help
302 Add support for NXP MXC I2C Controller 3.
303 Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
304
305config SYS_I2C_MXC_I2C4
306 bool "NXP MXC I2C4"
307 help
308 Add support for NXP MXC I2C Controller 4.
309 Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
Sriram Dashfa452192018-02-06 11:26:31 +0530310
311config SYS_I2C_MXC_I2C5
312 bool "NXP MXC I2C5"
313 help
314 Add support for NXP MXC I2C Controller 5.
315 Required for SoCs which have I2C MXC controller 5 eg LX2160A
316
317config SYS_I2C_MXC_I2C6
318 bool "NXP MXC I2C6"
319 help
320 Add support for NXP MXC I2C Controller 6.
321 Required for SoCs which have I2C MXC controller 6 eg LX2160A
322
323config SYS_I2C_MXC_I2C7
324 bool "NXP MXC I2C7"
325 help
326 Add support for NXP MXC I2C Controller 7.
327 Required for SoCs which have I2C MXC controller 7 eg LX2160A
328
329config SYS_I2C_MXC_I2C8
330 bool "NXP MXC I2C8"
331 help
332 Add support for NXP MXC I2C Controller 8.
333 Required for SoCs which have I2C MXC controller 8 eg LX2160A
Sriram Dash942ecc82018-02-06 11:26:30 +0530334endif
335
336if SYS_I2C_MXC_I2C1
337config SYS_MXC_I2C1_SPEED
338 int "I2C Channel 1 speed"
Tom Rini2ce7b652021-02-09 08:03:10 -0500339 default 40000000 if TARGET_LS2080A_EMU
Sriram Dash942ecc82018-02-06 11:26:30 +0530340 default 100000
341 help
342 MXC I2C Channel 1 speed
343
344config SYS_MXC_I2C1_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400345 hex "I2C1 Slave"
Sriram Dash942ecc82018-02-06 11:26:30 +0530346 default 0
347 help
348 MXC I2C1 Slave
349endif
350
351if SYS_I2C_MXC_I2C2
352config SYS_MXC_I2C2_SPEED
353 int "I2C Channel 2 speed"
Tom Rini2ce7b652021-02-09 08:03:10 -0500354 default 40000000 if TARGET_LS2080A_EMU
Sriram Dash942ecc82018-02-06 11:26:30 +0530355 default 100000
356 help
357 MXC I2C Channel 2 speed
358
359config SYS_MXC_I2C2_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400360 hex "I2C2 Slave"
Sriram Dash942ecc82018-02-06 11:26:30 +0530361 default 0
362 help
363 MXC I2C2 Slave
364endif
365
366if SYS_I2C_MXC_I2C3
367config SYS_MXC_I2C3_SPEED
368 int "I2C Channel 3 speed"
369 default 100000
370 help
371 MXC I2C Channel 3 speed
372
373config SYS_MXC_I2C3_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400374 hex "I2C3 Slave"
Sriram Dash942ecc82018-02-06 11:26:30 +0530375 default 0
376 help
377 MXC I2C3 Slave
378endif
379
380if SYS_I2C_MXC_I2C4
381config SYS_MXC_I2C4_SPEED
382 int "I2C Channel 4 speed"
383 default 100000
384 help
385 MXC I2C Channel 4 speed
386
387config SYS_MXC_I2C4_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400388 hex "I2C4 Slave"
Sriram Dash942ecc82018-02-06 11:26:30 +0530389 default 0
390 help
391 MXC I2C4 Slave
392endif
393
Sriram Dashfa452192018-02-06 11:26:31 +0530394if SYS_I2C_MXC_I2C5
395config SYS_MXC_I2C5_SPEED
396 int "I2C Channel 5 speed"
397 default 100000
398 help
399 MXC I2C Channel 5 speed
400
401config SYS_MXC_I2C5_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400402 hex "I2C5 Slave"
Sriram Dashfa452192018-02-06 11:26:31 +0530403 default 0
404 help
405 MXC I2C5 Slave
406endif
407
408if SYS_I2C_MXC_I2C6
409config SYS_MXC_I2C6_SPEED
410 int "I2C Channel 6 speed"
411 default 100000
412 help
413 MXC I2C Channel 6 speed
414
415config SYS_MXC_I2C6_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400416 hex "I2C6 Slave"
Sriram Dashfa452192018-02-06 11:26:31 +0530417 default 0
418 help
419 MXC I2C6 Slave
420endif
421
422if SYS_I2C_MXC_I2C7
423config SYS_MXC_I2C7_SPEED
424 int "I2C Channel 7 speed"
425 default 100000
426 help
427 MXC I2C Channel 7 speed
428
429config SYS_MXC_I2C7_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400430 hex "I2C7 Slave"
Sriram Dashfa452192018-02-06 11:26:31 +0530431 default 0
432 help
433 MXC I2C7 Slave
434endif
435
436if SYS_I2C_MXC_I2C8
437config SYS_MXC_I2C8_SPEED
438 int "I2C Channel 8 speed"
439 default 100000
440 help
441 MXC I2C Channel 8 speed
442
443config SYS_MXC_I2C8_SLAVE
Tom Rini15e7b762021-08-18 23:12:33 -0400444 hex "I2C8 Slave"
Sriram Dashfa452192018-02-06 11:26:31 +0530445 default 0
446 help
447 MXC I2C8 Slave
448endif
449
Stefan Boschc25e9e02020-07-10 19:07:28 +0200450config SYS_I2C_NEXELL
451 bool "Nexell I2C driver"
452 depends on DM_I2C
453 help
454 Add support for the Nexell I2C driver. This is used with various
455 Nexell parts such as S5Pxx18 series SoCs. All chips
456 have several I2C ports and all are provided, controlled by the
457 device tree.
458
Jim Liu2b77eea2022-06-23 13:31:42 +0800459config SYS_I2C_NPCM
460 bool "Nuvoton NPCM I2C driver"
461 help
462 Support for Nuvoton I2C controller driver.
463
Pragnesh Patelb2d4cbe2020-11-14 14:42:34 +0530464config SYS_I2C_OCORES
465 bool "ocores I2C driver"
466 depends on DM_I2C
467 help
468 Add support for ocores I2C controller. For details see
469 https://opencores.org/projects/i2c
470
Adam Forddaa0f052017-08-07 13:11:34 -0500471config SYS_I2C_OMAP24XX
472 bool "TI OMAP2+ I2C driver"
Vignesh R14106bc2019-06-04 18:08:11 -0500473 depends on ARCH_OMAP2PLUS || ARCH_K3
Adam Forddaa0f052017-08-07 13:11:34 -0500474 help
475 Add support for the OMAP2+ I2C driver.
476
Marek Vasuta06a0ac2018-04-21 18:57:28 +0200477config SYS_I2C_RCAR_I2C
478 bool "Renesas RCar I2C driver"
479 depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
480 help
481 Support for Renesas RCar I2C controller.
482
Marek Vasut9e75ea42017-11-28 08:02:27 +0100483config SYS_I2C_RCAR_IIC
484 bool "Renesas RCar Gen3 IIC driver"
Marek Vasutf51155e2018-02-17 02:17:40 +0100485 depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
Marek Vasut9e75ea42017-11-28 08:02:27 +0100486 help
487 Support for Renesas RCar Gen3 IIC controller.
488
Simon Glass34374692015-08-30 16:55:39 -0600489config SYS_I2C_ROCKCHIP
490 bool "Rockchip I2C driver"
491 depends on DM_I2C
492 help
493 Add support for the Rockchip I2C driver. This is used with various
494 Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
Chris Packham74751452019-01-13 22:13:25 +1300495 have several I2C ports and all are provided, controlled by the
Simon Glass34374692015-08-30 16:55:39 -0600496 device tree.
497
Simon Glass1174aad2015-03-06 13:19:04 -0700498config SYS_I2C_SANDBOX
499 bool "Sandbox I2C driver"
500 depends on SANDBOX && DM_I2C
501 help
502 Enable I2C support for sandbox. This is an emulation of a real I2C
503 bus. Devices can be attached to the bus using the device tree
Masahiro Yamadac77c7db2017-02-11 12:39:55 +0900504 which specifies the driver to use. See sandbox.dts as an example.
Simon Glass1174aad2015-03-06 13:19:04 -0700505
Tom Rini6aa07542021-08-18 23:12:34 -0400506config SYS_I2C_SH
507 bool "Legacy SuperH I2C interface"
508 depends on ARCH_RMOBILE && SYS_I2C_LEGACY
509 help
510 Enable the legacy SuperH I2C interface.
511
512if SYS_I2C_SH
513config SYS_I2C_SH_NUM_CONTROLLERS
514 int
515 default 5
516
517config SYS_I2C_SH_BASE0
518 hex
519 default 0xE6820000
520
521config SYS_I2C_SH_BASE1
522 hex
523 default 0xE6822000
524
525config SYS_I2C_SH_BASE2
526 hex
527 default 0xE6824000
528
529config SYS_I2C_SH_BASE3
530 hex
531 default 0xE6826000
532
533config SYS_I2C_SH_BASE4
534 hex
535 default 0xE6828000
536
537config SH_I2C_8BIT
538 bool
539 default y
540
541config SH_I2C_DATA_HIGH
542 int
543 default 4
544
545config SH_I2C_DATA_LOW
546 int
547 default 5
548
549config SH_I2C_CLOCK
550 int
551 default 104000000
552endif
553
Tom Rinide695722021-08-17 17:59:46 -0400554config SYS_I2C_SOFT
555 bool "Legacy software I2C interface"
556 help
557 Enable the legacy software defined I2C interface
558
559config SYS_I2C_SOFT_SPEED
560 int "Software I2C bus speed"
561 depends on SYS_I2C_SOFT
562 default 100000
563 help
564 Speed of the software I2C bus
565
566config SYS_I2C_SOFT_SLAVE
567 hex "Software I2C slave address"
568 depends on SYS_I2C_SOFT
569 default 0xfe
570 help
571 Slave address of the software I2C bus
572
Suneel Garapati5c2c3e82020-05-26 14:13:07 +0200573config SYS_I2C_OCTEON
574 bool "Octeon II/III/TX/TX2 I2C driver"
575 depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C
576 default y
577 help
578 Add support for the Marvell Octeon I2C driver. This is used with
579 various Octeon parts such as Octeon II/III and OcteonTX/TX2. All
580 chips have several I2C ports and all are provided, controlled by
581 the device tree.
582
Jaehoon Chung1d61ad92017-01-09 14:47:52 +0900583config SYS_I2C_S3C24X0
584 bool "Samsung I2C driver"
Tom Rini0283da42021-08-17 17:59:42 -0400585 depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && DM_I2C
Jaehoon Chung1d61ad92017-01-09 14:47:52 +0900586 help
587 Support for Samsung I2C controller as Samsung SoCs.
Simon Glass1174aad2015-03-06 13:19:04 -0700588
Patrice Chotard4fadcaf2017-08-09 14:45:27 +0200589config SYS_I2C_STM32F7
590 bool "STMicroelectronics STM32F7 I2C support"
Patrick Delaunay2514c2d2018-03-12 10:46:10 +0100591 depends on (STM32F7 || STM32H7 || ARCH_STM32MP) && DM_I2C
Patrice Chotard4fadcaf2017-08-09 14:45:27 +0200592 help
593 Enable this option to add support for STM32 I2C controller
594 introduced with STM32F7/H7 SoCs. This I2C controller supports :
595 _ Slave and master modes
596 _ Multimaster capability
597 _ Standard-mode (up to 100 kHz)
598 _ Fast-mode (up to 400 kHz)
599 _ Fast-mode Plus (up to 1 MHz)
600 _ 7-bit and 10-bit addressing mode
601 _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
602 _ All 7-bit addresses acknowledge mode
603 _ General call
604 _ Programmable setup and hold times
605 _ Easy to use event management
606 _ Optional clock stretching
607 _ Software reset
608
Samuel Holland104950a2021-10-08 00:17:20 -0500609config SYS_I2C_SUN6I_P2WI
610 bool "Allwinner sun6i P2WI controller"
611 depends on ARCH_SUNXI
612 help
613 Support for the P2WI (Push/Pull 2 Wire Interface) controller embedded
614 in the Allwinner A31 and A31s SOCs. This interface is used to connect
615 to specific devices like the X-Powers AXP221 PMIC.
616
Samuel Holland3227c852021-10-08 00:17:21 -0500617config SYS_I2C_SUN8I_RSB
618 bool "Allwinner sun8i Reduced Serial Bus controller"
619 depends on ARCH_SUNXI
620 help
621 Support for Allwinner's Reduced Serial Bus (RSB) controller. This
622 controller is responsible for communicating with various RSB based
623 devices, such as X-Powers AXPxxx PMICs and AC100/AC200 CODEC ICs.
624
Jassi Brar4483fba2021-06-04 18:44:48 +0900625config SYS_I2C_SYNQUACER
626 bool "Socionext SynQuacer I2C controller"
627 depends on ARCH_SYNQUACER && DM_I2C
628 help
629 Support for Socionext Synquacer I2C controller. This I2C controller
630 will be used for RTC and LS-connector on DeveloperBox.
631
Peter Robinson02253d42019-02-20 12:17:26 +0000632config SYS_I2C_TEGRA
633 bool "NVIDIA Tegra internal I2C controller"
Trevor Woerner18138ab2020-05-06 08:02:41 -0400634 depends on ARCH_TEGRA
Peter Robinson02253d42019-02-20 12:17:26 +0000635 help
636 Support for NVIDIA I2C controller available in Tegra SoCs.
637
Masahiro Yamada26f820f2015-01-13 12:44:36 +0900638config SYS_I2C_UNIPHIER
639 bool "UniPhier I2C driver"
640 depends on ARCH_UNIPHIER && DM_I2C
641 default y
642 help
Masahiro Yamadab6ef3a32015-05-29 17:30:01 +0900643 Support for UniPhier I2C controller driver. This I2C controller
644 is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
Masahiro Yamada238bd0b2015-01-13 12:44:37 +0900645
646config SYS_I2C_UNIPHIER_F
647 bool "UniPhier FIFO-builtin I2C driver"
648 depends on ARCH_UNIPHIER && DM_I2C
649 default y
650 help
Masahiro Yamadab6ef3a32015-05-29 17:30:01 +0900651 Support for UniPhier FIFO-builtin I2C controller driver.
Masahiro Yamada238bd0b2015-01-13 12:44:37 +0900652 This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
Simon Glass3d1957f2015-08-03 08:19:21 -0600653
Heiko Schochere3bc4bb2018-10-11 07:26:33 +0200654config SYS_I2C_VERSATILE
655 bool "Arm Ltd Versatile I2C bus driver"
Tom Rinic6c26a02021-02-20 20:05:47 -0500656 depends on DM_I2C && TARGET_VEXPRESS64_JUNO
Heiko Schochere3bc4bb2018-10-11 07:26:33 +0200657 help
658 Add support for the Arm Ltd Versatile Express I2C driver. The I2C host
659 controller is present in the development boards manufactured by Arm Ltd.
660
Marek BehĂșn999ac222021-10-09 19:33:37 +0200661config SYS_I2C_MV
662 bool "Marvell PXA (Armada 3720) I2C driver"
663 help
664 Support for PXA based I2C controller used on Armada 3720 SoC.
665 In Linux, this driver is called i2c-pxa.
666
mario.six@gdsys.cc14a6ff22016-07-21 11:57:10 +0200667config SYS_I2C_MVTWSI
668 bool "Marvell I2C driver"
mario.six@gdsys.cc14a6ff22016-07-21 11:57:10 +0200669 help
670 Support for Marvell I2C controllers as used on the orion5x and
671 kirkwood SoC families.
672
Stephen Warren34f1c9f2016-08-08 11:28:27 -0600673config TEGRA186_BPMP_I2C
674 bool "Enable Tegra186 BPMP-based I2C driver"
675 depends on TEGRA186_BPMP
676 help
677 Support for Tegra I2C controllers managed by the BPMP (Boot and
678 Power Management Processor). On Tegra186, some I2C controllers are
679 directly controlled by the main CPU, whereas others are controlled
680 by the BPMP, and can only be accessed by the main CPU via IPC
681 requests to the BPMP. This driver covers the latter case.
682
Tom Rinia5752f82021-08-18 23:12:32 -0400683config SYS_I2C_SLAVE
684 hex "I2C Slave address channel (all buses)"
685 depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
686 default 0xfe
687 help
688 I2C Slave address channel 0 for all buses in the legacy drivers.
689 Many boards/controllers/drivers don't support an I2C slave
690 interface so provide a default slave address for them for use in
691 common code. A real value for CONFIG_SYS_I2C_SLAVE should be
692 defined for any board which does support a slave interface and
693 this default used otherwise.
694
695config SYS_I2C_SPEED
696 int "I2C Slave channel 0 speed (all buses)"
697 depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
698 default 100000
699 help
700 I2C Slave speed channel 0 for all buses in the legacy drivers.
701
Adam Fordfc760cc2017-08-11 06:39:34 -0500702config SYS_I2C_BUS_MAX
703 int "Max I2C busses"
Tom Rinicb42c1f2022-06-27 13:35:50 -0400704 depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
Adam Fordfc760cc2017-08-11 06:39:34 -0500705 default 2 if TI816X
Tom Rinicb42c1f2022-06-27 13:35:50 -0400706 default 3 if OMAP34XX || AM33XX || AM43XX
Tom Rinif5528162022-12-02 16:42:41 -0500707 default 4 if ARCH_SOCFPGA || OMAP44XX
Adam Fordfc760cc2017-08-11 06:39:34 -0500708 default 5 if OMAP54XX
709 help
710 Define the maximum number of available I2C buses.
711
Marek Vasutad827a52018-12-19 12:26:27 +0100712config SYS_I2C_XILINX_XIIC
713 bool "Xilinx AXI I2C driver"
714 depends on DM_I2C
715 help
716 Support for Xilinx AXI I2C controller.
717
Mario Six92164212018-01-15 11:08:11 +0100718config SYS_I2C_IHS
719 bool "gdsys IHS I2C driver"
720 depends on DM_I2C
721 help
722 Support for gdsys IHS I2C driver on FPGA bus.
723
Simon Glass3d1957f2015-08-03 08:19:21 -0600724source "drivers/i2c/muxes/Kconfig"
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900725
Simon Glass59e11eb2021-07-10 21:14:35 -0600726endif