blob: 0f0dd21c23f2a077ae0f75812a946da3899c1671 [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
3 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +000011 */
12
13#ifndef _CONFIG_DNS325_H
14#define _CONFIG_DNS325_H
15
16/*
17 * Machine number definition
18 */
19#define MACH_TYPE_DNS325 3800
20#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
27#define CONFIG_KIRKWOOD /* SOC Family Name */
28#define CONFIG_KW88F6281 /* SOC Name */
29#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
30
31/*
32 * Commands configuration
33 */
34#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
35#include <config_cmd_default.h>
36#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_ENV
38#define CONFIG_CMD_NAND
39#define CONFIG_CMD_PING
40#define CONFIG_CMD_USB
41#define CONFIG_CMD_IDE
42#define CONFIG_CMD_DATE
43#define CONFIG_SYS_MVFS
44
45#define CONFIG_NR_DRAM_BANKS 1
46
47/*
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
50 */
51#include "mv-common.h"
52
53/* Remove or override few declarations from mv-common.h */
54#undef CONFIG_SYS_PROMPT
55#define CONFIG_SYS_PROMPT "=> "
56
57/*
58 * Ethernet Driver configuration
59 */
60#ifdef CONFIG_CMD_NET
61#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
62#define CONFIG_NETCONSOLE
63#endif
64
65/*
66 * SATA Driver configuration
67 */
68#ifdef CONFIG_MVSATA_IDE
69#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
70#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
71#endif
72
73/*
74 * RTC driver configuration
75 */
76#ifdef CONFIG_CMD_DATE
77#define CONFIG_RTC_MV
78#endif
79
80/*
81 * Enable GPI0 support
82 */
83#define CONFIG_KIRKWOOD_GPIO
84
85/*
86 * Use the HUSH parser
87 */
88#define CONFIG_SYS_HUSH_PARSER
Stefanbfacf462011-12-23 06:35:04 +000089
90/*
91 * Console configuration
92 */
93#define CONFIG_CONSOLE_MUX
94#define CONFIG_SYS_CONSOLE_IS_IN_ENV
95
96/*
97 * Enable device tree support
98 */
99#define CONFIG_OF_LIBFDT
100
101/*
102 * Display cpu info at boot
103 */
104#define CONFIG_DISPLAY_CPUINFO
105
106/*
107 * Environment variables configurations
108 */
109#ifdef CONFIG_CMD_NAND
110#define CONFIG_ENV_IS_IN_NAND
111#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
112#else
113#define CONFIG_ENV_IS_NOWHERE
114#endif
115
116#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
117#define CONFIG_ENV_ADDR 0xe0000
118#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
119
120/*
121 * Default environment variables
122 */
123#define MTDIDS_DEFAULT "nand0=orion_nand"
124
125#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
126 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
127
128#define CONFIG_EXTRA_ENV_SETTINGS \
129 "stdin=serial\0" \
130 "stdout=serial\0" \
131 "stderr=serial\0" \
132 "loadaddr=0x800000\0" \
133 "autoload=no\0" \
134 "console=ttyS0,115200\0" \
135 "mtdparts="MTDPARTS_DEFAULT \
136 "optargs=\0" \
137 "bootenv=uEnv.txt\0" \
138 "importbootenv=echo Importing environment ...; " \
139 "env import -t ${loadaddr} ${filesize}\0" \
140 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
141 "setbootargs=setenv bootargs console=${console} " \
142 "${optargs} " \
143 "${mtdparts} " \
144 "root=${bootenvroot} " \
145 "rootfstype=${bootenvrootfstype}\0" \
146 "subbootcmd=run setbootargs; " \
147 "if run bootenvloadimage; then " \
148 "bootm ${loadaddr};" \
149 "fi;\0" \
150 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
151 "nandrootfstype=ubifs\0" \
152 "nandloadimage=nand read ${loadaddr} kernel\0" \
153 "setnandbootenv=echo Booting from nand ...; " \
154 "setenv bootenvroot ${nandroot}; " \
155 "setenv bootenvrootfstype ${nandrootfstype}; " \
156 "setenv bootenvloadimage ${nandloadimage}\0"
157
158#define CONFIG_BOOTCOMMAND \
159 "if test -n ${bootenv} && usb start; then " \
160 "if run loadbootenv; then " \
161 "echo Loaded environment ${bootenv} from usb;" \
162 "run importbootenv;" \
163 "fi;" \
164 "if test -n ${bootenvcmd}; then " \
165 "echo Running bootenvcmd ...;" \
166 "run bootenvcmd;" \
167 "fi;" \
168 "fi;" \
169 "run setnandbootenv subbootcmd;"
170
171#endif /* _CONFIG_DNS325_H */