Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 3a473b2a6523db9cdf2b5aed22d9730b4ebc5693 / . / board / Marvell / common / misc.S
blob: 41c3a9508e90f3713924b40ecfa673a9475ada96 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +0000[diff] [blame^]1#include <config.h>
2#include <74xx_7xx.h>
3#include "version.h"
4
5#include <ppc_asm.tmpl>
6#include <ppc_defs.h>
7
8#include <asm/cache.h>
9#include <asm/mmu.h>
10
11#include "../include/mv_gen_reg.h"
12
13#ifdef CONFIG_ECC
14 /* Galileo specific asm code for initializing ECC */
15 .globl board_relocate_rom
16board_relocate_rom:
17 mflr r7
18 /* update the location of the GT registers */
19 lis r11, CFG_GT_REGS@h
20 /* if we're using ECC, we must use the DMA engine to copy ourselves */
21 bl start_idma_transfer_0
22 bl wait_for_idma_0
23 bl stop_idma_engine_0
24
25 mtlr r7
26 blr
27
28 .globl board_init_ecc
29board_init_ecc:
30 mflr r7
31 /* NOTE: r10 still contains the location we've been relocated to
32 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
33
34 /* now that we're running from ram, init the rest of main memory
35 * for ECC use */
36 lis r8, CFG_MONITOR_LEN@h
37 ori r8, r8, CFG_MONITOR_LEN@l
38
39 divw r3, r10, r8
40
41 /* set up the counter, and init the starting address */
42 mtctr r3
43 li r12, 0
44
45 /* bytes per transfer */
46 mr r5, r8
47about_to_init_ecc:
481: mr r3, r12
49 mr r4, r12
50 bl start_idma_transfer_0
51 bl wait_for_idma_0
52 bl stop_idma_engine_0
53 add r12, r12, r8
54 bdnz 1b
55
56 mtlr r7
57 blr
58
59 /* r3: dest addr
60 * r4: source addr
61 * r5: byte count
62 * r11: gt regbase
63 * trashes: r6, r5
64 */
65start_idma_transfer_0:
66 /* set the byte count, including the OWN bit */
67 mr r6, r11
68 ori r6, r6, CHANNEL0_DMA_BYTE_COUNT
69 stwbrx r5, 0, (r6)
70
71 /* set the source address */
72 mr r6, r11
73 ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
74 stwbrx r4, 0, (r6)
75
76 /* set the dest address */
77 mr r6, r11
78 ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
79 stwbrx r3, 0, (r6)
80
81 /* set the next record pointer */
82 li r5, 0
83 mr r6, r11
84 ori r6, r6, CHANNEL0NEXT_RECORD_POINTER
85 stwbrx r5, 0, (r6)
86
87 /* set the low control register */
88 /* bit 9 is NON chained mode, bit 31 is new style descriptors.
89 bit 12 is channel enable */
90 ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
91 /* 15 shifted by 16 (oris) == bit 31 */
92 oris r5, r5, (1 << 15)
93 mr r6, r11
94 ori r6, r6, CHANNEL0CONTROL
95 stwbrx r5, 0, (r6)
96
97 blr
98
99 /* this waits for the bytecount to return to zero, indicating
100 * that the trasfer is complete */
101wait_for_idma_0:
102 mr r5, r11
103 lis r6, 0xff
104 ori r6, r6, 0xffff
105 ori r5, r5, CHANNEL0_DMA_BYTE_COUNT
1061: lwbrx r4, 0, (r5)
107 and. r4, r4, r6
108 bne 1b
109
110 blr
111
112 /* this turns off channel 0 of the idma engine */
113stop_idma_engine_0:
114 /* shut off the DMA engine */
115 li r5, 0
116 mr r6, r11
117 ori r6, r6, CHANNEL0CONTROL
118 stwbrx r5, 0, (r6)
119
120 blr
121#endif
122
123#ifdef CFG_BOARD_ASM_INIT
124 /* NOTE: trashes r3-r7 */
125 .globl board_asm_init
126board_asm_init:
127 /* just move the GT registers to where they belong */
128 lis r3, CFG_DFL_GT_REGS@h
129 ori r3, r3, CFG_DFL_GT_REGS@l
130 lis r4, CFG_GT_REGS@h
131 ori r4, r4, CFG_GT_REGS@l
132 li r5, INTERNAL_SPACE_DECODE
133
134 /* test to see if we've already moved */
135 lwbrx r6, r5, r4
136 andi. r6, r6, 0xffff
137 /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
138/* rlwinm r7, r4, 8, 16, 31
139 rlwinm r7, r4, 12, 16, 31 */ /* original */
140 rlwinm r7, r4, 16, 16, 31
141 /* -----------------------------------------------------*/
142 cmp cr0, r7, r6
143 beqlr
144
145 /* nope, have to move the registers */
146 lwbrx r6, r5, r3
147 andis. r6, r6, 0xffff
148 or r6, r6, r7
149 stwbrx r6, r5, r3
150
151 /* now, poll for the change */
1521: lwbrx r7, r5, r4
153 cmp cr0, r7, r6
154 bne 1b
155
156 /* done! */
157 blr
158#endif
159
160/* For use of the debug LEDs */
161 .global led_on0_relocated
162led_on0_relocated:
163 xor r21, r21, r21
164 xor r18, r18, r18
165 lis r18, 0xFC80
166 ori r18, r18, 0x8000
167 stw r21, 0x0(r18)
168/* stw r18, 0x0(r18) */
169 sync
170 blr
171
172 .global led_off0_relocated
173led_off0_relocated:
174 xor r21, r21, r21
175 xor r18, r18, r18
176 lis r18, 0xFC81
177 ori r18, r18, 0x4000
178 stw r21, 0x0(r18)
179/* stw r18, 0x0(r18) */
180 sync
181 blr
182
183 .global led_on0
184led_on0:
185 xor r18, r18, r18
186 lis r18, 0x1c80
187 ori r18, r18, 0x8000
188 stw r18, 0x0(r18)
189 sync
190 blr
191
192 .global led_off0
193led_off0:
194 xor r18, r18, r18
195 lis r18, 0x1c81
196 ori r18, r18, 0x4000
197 stw r18, 0x0(r18)
198 sync
199 blr
200
201 .global led_on1
202led_on1:
203 xor r18, r18, r18
204 lis r18, 0x1c80
205 ori r18, r18, 0xc000
206 stw r18, 0x0(r18)
207 sync
208 blr
209
210 .global led_off1
211led_off1:
212 xor r18, r18, r18
213 lis r18, 0x1c81
214 ori r18, r18, 0x8000
215 stw r18, 0x0(r18)
216 sync
217 blr
218
219 .global led_on2
220led_on2:
221 xor r18, r18, r18
222 lis r18, 0x1c81
223 ori r18, r18, 0x0000
224 stw r18, 0x0(r18)
225 sync
226 blr
227
228 .global led_off2
229led_off2:
230 xor r18, r18, r18
231 lis r18, 0x1c81
232 ori r18, r18, 0xc000
233 stw r18, 0x0(r18)
234 sync
235 blr