blob: 7083b6e103f58e8acdd0ed7a22c75fb50059dcb2 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Marek Vasutf2e4d6a2014-12-16 14:09:22 +01002/*
3 * Novena video output support
4 *
Marek Vasut331ae842014-12-16 14:09:23 +01005 * IT6251 code based on code Copyright (C) 2014 Sean Cross
6 * from https://github.com/xobs/novena-linux.git commit
7 * 3d85836ee1377d445531928361809612aa0a18db
8 *
Marek Vasutf2e4d6a2014-12-16 14:09:22 +01009 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
Marek Vasutf2e4d6a2014-12-16 14:09:22 +010010 */
11
12#include <common.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090013#include <linux/errno.h>
Marek Vasutf2e4d6a2014-12-16 14:09:22 +010014#include <asm/gpio.h>
15#include <asm/io.h>
16#include <asm/arch/clock.h>
17#include <asm/arch/crm_regs.h>
18#include <asm/arch/imx-regs.h>
19#include <asm/arch/iomux.h>
20#include <asm/arch/mxc_hdmi.h>
21#include <asm/arch/sys_proto.h>
Stefano Babic552a8482017-06-29 10:16:06 +020022#include <asm/mach-imx/iomux-v3.h>
23#include <asm/mach-imx/mxc_i2c.h>
24#include <asm/mach-imx/video.h>
Marek Vasutf2e4d6a2014-12-16 14:09:22 +010025#include <i2c.h>
26#include <input.h>
27#include <ipu_pixfmt.h>
28#include <linux/fb.h>
29#include <linux/input.h>
30#include <malloc.h>
31#include <stdio_dev.h>
32
33#include "novena.h"
34
Marek Vasut331ae842014-12-16 14:09:23 +010035#define IT6251_VENDOR_ID_LOW 0x00
36#define IT6251_VENDOR_ID_HIGH 0x01
37#define IT6251_DEVICE_ID_LOW 0x02
38#define IT6251_DEVICE_ID_HIGH 0x03
39#define IT6251_SYSTEM_STATUS 0x0d
40#define IT6251_SYSTEM_STATUS_RINTSTATUS (1 << 0)
41#define IT6251_SYSTEM_STATUS_RHPDSTATUS (1 << 1)
42#define IT6251_SYSTEM_STATUS_RVIDEOSTABLE (1 << 2)
43#define IT6251_SYSTEM_STATUS_RPLL_IOLOCK (1 << 3)
44#define IT6251_SYSTEM_STATUS_RPLL_XPLOCK (1 << 4)
45#define IT6251_SYSTEM_STATUS_RPLL_SPLOCK (1 << 5)
46#define IT6251_SYSTEM_STATUS_RAUXFREQ_LOCK (1 << 6)
47#define IT6251_REF_STATE 0x0e
48#define IT6251_REF_STATE_MAIN_LINK_DISABLED (1 << 0)
49#define IT6251_REF_STATE_AUX_CHANNEL_READ (1 << 1)
50#define IT6251_REF_STATE_CR_PATTERN (1 << 2)
51#define IT6251_REF_STATE_EQ_PATTERN (1 << 3)
52#define IT6251_REF_STATE_NORMAL_OPERATION (1 << 4)
53#define IT6251_REF_STATE_MUTED (1 << 5)
54
55#define IT6251_REG_PCLK_CNT_LOW 0x57
56#define IT6251_REG_PCLK_CNT_HIGH 0x58
57
58#define IT6521_RETRY_MAX 20
59
60static int it6251_is_stable(void)
61{
62 const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
63 const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
64 int status;
65 int clkcnt;
66 int rpclkcnt;
67 int refstate;
68
69 rpclkcnt = (i2c_reg_read(caddr, 0x13) & 0xff) |
70 ((i2c_reg_read(caddr, 0x14) << 8) & 0x0f00);
71 debug("RPCLKCnt: %d\n", rpclkcnt);
72
73 status = i2c_reg_read(caddr, IT6251_SYSTEM_STATUS);
74 debug("System status: 0x%02x\n", status);
75
76 clkcnt = (i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_LOW) & 0xff) |
77 ((i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_HIGH) << 8) &
78 0x0f00);
79 debug("Clock: 0x%02x\n", clkcnt);
80
81 refstate = i2c_reg_read(laddr, IT6251_REF_STATE);
82 debug("Ref Link State: 0x%02x\n", refstate);
83
84 if ((refstate & 0x1f) != 0)
85 return 0;
86
87 /* If video is muted, that's a failure */
88 if (refstate & IT6251_REF_STATE_MUTED)
89 return 0;
90
91 if (!(status & IT6251_SYSTEM_STATUS_RVIDEOSTABLE))
92 return 0;
93
94 return 1;
95}
96
97static int it6251_ready(void)
98{
99 const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
100
101 /* Test if the IT6251 came out of reset by reading ID regs. */
102 if (i2c_reg_read(caddr, IT6251_VENDOR_ID_LOW) != 0x15)
103 return 0;
104 if (i2c_reg_read(caddr, IT6251_VENDOR_ID_HIGH) != 0xca)
105 return 0;
106 if (i2c_reg_read(caddr, IT6251_DEVICE_ID_LOW) != 0x51)
107 return 0;
108 if (i2c_reg_read(caddr, IT6251_DEVICE_ID_HIGH) != 0x62)
109 return 0;
110
111 return 1;
112}
113
114static void it6251_program_regs(void)
115{
116 const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
117 const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
118
119 i2c_reg_write(caddr, 0x05, 0x00);
120 mdelay(1);
121
122 /* set LVDSRX address, and enable */
123 i2c_reg_write(caddr, 0xfd, 0xbc);
124 i2c_reg_write(caddr, 0xfe, 0x01);
125
126 /*
127 * LVDSRX
128 */
129 /* This write always fails, because the chip goes into reset */
130 /* reset LVDSRX */
131 i2c_reg_write(laddr, 0x05, 0xff);
132 i2c_reg_write(laddr, 0x05, 0x00);
133
134 /* reset LVDSRX PLL */
135 i2c_reg_write(laddr, 0x3b, 0x42);
136 i2c_reg_write(laddr, 0x3b, 0x43);
137
138 /* something with SSC PLL */
139 i2c_reg_write(laddr, 0x3c, 0x08);
140 /* don't swap links, but writing reserved registers */
141 i2c_reg_write(laddr, 0x0b, 0x88);
142
143 /* JEIDA, 8-bit depth 0x11, orig 0x42 */
144 i2c_reg_write(laddr, 0x2c, 0x01);
145 /* "reserved" */
146 i2c_reg_write(laddr, 0x32, 0x04);
147 /* "reserved" */
148 i2c_reg_write(laddr, 0x35, 0xe0);
149 /* "reserved" + clock delay */
150 i2c_reg_write(laddr, 0x2b, 0x24);
151
152 /* reset LVDSRX pix clock */
153 i2c_reg_write(laddr, 0x05, 0x02);
154 i2c_reg_write(laddr, 0x05, 0x00);
155
156 /*
157 * DPTX
158 */
159 /* set for two lane mode, normal op, no swapping, no downspread */
160 i2c_reg_write(caddr, 0x16, 0x02);
161
162 /* some AUX channel EDID magic */
163 i2c_reg_write(caddr, 0x23, 0x40);
164
165 /* power down lanes 3-0 */
166 i2c_reg_write(caddr, 0x5c, 0xf3);
167
168 /* enable DP scrambling, change EQ CR phase */
169 i2c_reg_write(caddr, 0x5f, 0x06);
170
171 /* color mode RGB, pclk/2 */
172 i2c_reg_write(caddr, 0x60, 0x02);
173 /* dual pixel input mode, no EO swap, no RGB swap */
174 i2c_reg_write(caddr, 0x61, 0x04);
175 /* M444B24 video format */
176 i2c_reg_write(caddr, 0x62, 0x01);
177
178 /* vesa range / not interlace / vsync high / hsync high */
179 i2c_reg_write(caddr, 0xa0, 0x0F);
180
181 /* hpd event timer set to 1.6-ish ms */
182 i2c_reg_write(caddr, 0xc9, 0xf5);
183
184 /* more reserved magic */
185 i2c_reg_write(caddr, 0xca, 0x4d);
186 i2c_reg_write(caddr, 0xcb, 0x37);
187
188 /* enhanced framing mode, auto video fifo reset, video mute disable */
189 i2c_reg_write(caddr, 0xd3, 0x03);
190
191 /* "vidstmp" and some reserved stuff */
192 i2c_reg_write(caddr, 0xd4, 0x45);
193
194 /* queue number -- reserved */
195 i2c_reg_write(caddr, 0xe7, 0xa0);
196 /* info frame packets and reserved */
197 i2c_reg_write(caddr, 0xe8, 0x33);
198 /* more AVI stuff */
199 i2c_reg_write(caddr, 0xec, 0x00);
200
201 /* select PC master reg for aux channel? */
202 i2c_reg_write(caddr, 0x23, 0x42);
203
204 /* send PC request commands */
205 i2c_reg_write(caddr, 0x24, 0x00);
206 i2c_reg_write(caddr, 0x25, 0x00);
207 i2c_reg_write(caddr, 0x26, 0x00);
208
209 /* native aux read */
210 i2c_reg_write(caddr, 0x2b, 0x00);
211 /* back to internal */
212 i2c_reg_write(caddr, 0x23, 0x40);
213
214 /* voltage swing level 3 */
215 i2c_reg_write(caddr, 0x19, 0xff);
216 /* pre-emphasis level 3 */
217 i2c_reg_write(caddr, 0x1a, 0xff);
218
219 /* start link training */
220 i2c_reg_write(caddr, 0x17, 0x01);
221}
222
223static int it6251_init(void)
224{
225 const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
226 int reg;
227 int tries, retries = 0;
228
229 for (retries = 0; retries < IT6521_RETRY_MAX; retries++) {
230 /* Program the chip. */
231 it6251_program_regs();
232
233 /* Wait for video stable. */
234 for (tries = 0; tries < 100; tries++) {
235 reg = i2c_reg_read(caddr, 0x17);
236 /* Test Link CFG, STS, LCS read done. */
237 if ((reg & 0xe0) != 0xe0) {
238 /* Not yet, wait a bit more. */
239 mdelay(2);
240 continue;
241 }
242
243 /* Test if the video input is stable. */
244 if (it6251_is_stable())
245 return 0;
246 }
247 /*
248 * If we couldn't stabilize, requeue and try again,
249 * because it means that the LVDS channel isn't
250 * stable yet.
251 */
252 printf("Display didn't stabilize.\n");
253 printf("This may be because the LVDS port is still in powersave mode.\n");
254 mdelay(50);
255 }
256
257 return -EINVAL;
258}
259
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100260static void enable_hdmi(struct display_info_t const *dev)
261{
262 imx_enable_hdmi_phy();
263}
264
Marek Vasut331ae842014-12-16 14:09:23 +0100265static int lvds_enabled;
266
267static void enable_lvds(struct display_info_t const *dev)
268{
269 if (lvds_enabled)
270 return;
271
272 /* ITE IT6251 power enable. */
Marek Vasutc4e93f62019-05-17 20:32:16 +0200273 gpio_request(NOVENA_ITE6251_PWR_GPIO, "ite6251-power");
Marek Vasut331ae842014-12-16 14:09:23 +0100274 gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 0);
275 mdelay(10);
276 gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 1);
277 mdelay(20);
278 lvds_enabled = 1;
279}
280
281static int detect_lvds(struct display_info_t const *dev)
282{
283 int ret, loops = 250;
284
285 enable_lvds(dev);
286
287 ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
288 if (ret) {
289 puts("Cannot select IT6251 I2C bus.\n");
290 return 0;
291 }
292
293 /* Wait up-to ~250 mS for the LVDS to come up. */
294 while (--loops) {
295 ret = it6251_ready();
296 if (ret)
297 return ret;
298
299 mdelay(1);
300 }
301
302 return 0;
303}
304
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100305struct display_info_t const displays[] = {
306 {
307 /* HDMI Output */
308 .bus = -1,
309 .addr = 0,
310 .pixfmt = IPU_PIX_FMT_RGB24,
311 .detect = detect_hdmi,
312 .enable = enable_hdmi,
313 .mode = {
314 .name = "HDMI",
315 .refresh = 60,
316 .xres = 1024,
317 .yres = 768,
318 .pixclock = 15384,
319 .left_margin = 220,
320 .right_margin = 40,
321 .upper_margin = 21,
322 .lower_margin = 7,
323 .hsync_len = 60,
324 .vsync_len = 10,
325 .sync = FB_SYNC_EXT,
326 .vmode = FB_VMODE_NONINTERLACED
327 },
Marek Vasut331ae842014-12-16 14:09:23 +0100328 }, {
329 /* LVDS Output: N133HSE-EA1 Rev. C1 */
330 .bus = -1,
331 .pixfmt = IPU_PIX_FMT_RGB24,
332 .detect = detect_lvds,
333 .enable = enable_lvds,
334 .mode = {
335 .name = "Chimei-FHD",
336 .refresh = 60,
337 .xres = 1920,
338 .yres = 1080,
339 .pixclock = 15384,
340 .left_margin = 148,
341 .right_margin = 88,
342 .upper_margin = 36,
343 .lower_margin = 4,
344 .hsync_len = 44,
345 .vsync_len = 5,
346 .sync = FB_SYNC_HOR_HIGH_ACT |
347 FB_SYNC_VERT_HIGH_ACT |
348 FB_SYNC_EXT,
349 .vmode = FB_VMODE_NONINTERLACED,
350 },
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100351 },
352};
353
354size_t display_count = ARRAY_SIZE(displays);
355
Marek Vasut331ae842014-12-16 14:09:23 +0100356static void enable_vpll(void)
357{
358 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
359 int timeout = 100000;
360
361 setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
362
363 clrsetbits_le32(&ccm->analog_pll_video,
364 BM_ANADIG_PLL_VIDEO_DIV_SELECT |
365 BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
366 BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
367 BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
368
369 writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
370 writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
371
372 clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
373
374 while (timeout--)
375 if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
376 break;
377 if (timeout < 0)
378 printf("Warning: video pll lock timeout!\n");
379
380 clrsetbits_le32(&ccm->analog_pll_video,
381 BM_ANADIG_PLL_VIDEO_BYPASS,
382 BM_ANADIG_PLL_VIDEO_ENABLE);
383}
384
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100385void setup_display_clock(void)
386{
387 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
388 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
389
390 enable_ipu_clock();
Marek Vasut331ae842014-12-16 14:09:23 +0100391 enable_vpll();
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100392 imx_setup_hdmi();
393
Marek Vasut331ae842014-12-16 14:09:23 +0100394 /* Turn on IPU LDB DI0 clocks */
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100395 setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
396
Marek Vasut331ae842014-12-16 14:09:23 +0100397 /* Switch LDB DI0 to PLL5 (Video PLL) */
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100398 clrsetbits_le32(&mxc_ccm->cs2cdr,
Marek Vasut331ae842014-12-16 14:09:23 +0100399 MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
400 (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100401
Marek Vasut331ae842014-12-16 14:09:23 +0100402 /* LDB clock div by 3.5 */
403 clrbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100404
Marek Vasut331ae842014-12-16 14:09:23 +0100405 /* DI0 clock derived from ldb_di0_clk */
406 clrsetbits_le32(&mxc_ccm->chsccdr,
407 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
408 (CHSCCDR_CLK_SEL_LDB_DI0 <<
409 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
410 );
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100411
Marek Vasut331ae842014-12-16 14:09:23 +0100412 /* Enable both LVDS channels, both connected to DI0. */
413 writel(IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH |
414 IOMUXC_GPR2_BIT_MAPPING_CH1_JEIDA |
415 IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT |
416 IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA |
417 IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
418 IOMUXC_GPR2_SPLIT_MODE_EN_MASK |
419 IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0 |
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100420 IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
421 &iomux->gpr[2]);
422
Marek Vasut331ae842014-12-16 14:09:23 +0100423 clrsetbits_le32(&iomux->gpr[3],
424 IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
425 IOMUXC_GPR3_LVDS1_MUX_CTL_MASK,
426 (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
427 IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET) |
428 (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
429 IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET)
430 );
431}
432
433void setup_display_lvds(void)
434{
435 int ret;
436
437 ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
438 if (ret) {
439 puts("Cannot select LVDS-to-eDP I2C bus.\n");
440 return;
441 }
442
443 /* The IT6251 should be ready now, if it's not, it's not connected. */
444 ret = it6251_ready();
445 if (!ret)
446 return;
447
448 /* Init the LVDS-to-eDP chip and if it succeeded, enable backlight. */
449 ret = it6251_init();
450 if (!ret) {
Marek Vasutc4e93f62019-05-17 20:32:16 +0200451 gpio_request(NOVENA_BACKLIGHT_PWR_GPIO, "backlight-power");
452 gpio_request(NOVENA_BACKLIGHT_PWM_GPIO, "backlight-pwm");
Marek Vasut331ae842014-12-16 14:09:23 +0100453 /* Backlight power enable. */
454 gpio_direction_output(NOVENA_BACKLIGHT_PWR_GPIO, 1);
455 /* PWM backlight pin, always on for full brightness. */
456 gpio_direction_output(NOVENA_BACKLIGHT_PWM_GPIO, 1);
457 }
Marek Vasutf2e4d6a2014-12-16 14:09:22 +0100458}