blob: 748c8341acef3dce7a95b4dc99591ebd53738ad8 [file] [log] [blame]
wdenk0608e042004-03-25 19:29:38 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2000-2005
wdenk0608e042004-03-25 19:29:38 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
5 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02006 * SPDX-License-Identifier: GPL-2.0+
wdenk0608e042004-03-25 19:29:38 +00007 */
8
9/*
10 * board/config.h - configuration options, board specific
11 * Derived from ../tqm8xx/tqm8xx.c
12 */
13
14#ifndef __CONFIG_H
15#define __CONFIG_H
16
17/*
18 * High Level Configuration Options
19 * (easy to change)
20 */
21
Heiko Schochere604e402010-07-19 23:46:48 +020022#define CONFIG_MPC859T 1 /* This is a MPC859T CPU */
23#define CONFIG_KUP4X 1 /* ...on a KUP4X module */
wdenk0608e042004-03-25 19:29:38 +000024
Wolfgang Denk2ae18242010-10-06 09:05:45 +020025#define CONFIG_SYS_TEXT_BASE 0x40000000
26
Heiko Schochere604e402010-07-19 23:46:48 +020027#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
wdenk0608e042004-03-25 19:29:38 +000028#undef CONFIG_8xx_CONS_SMC2
29#undef CONFIG_8xx_CONS_NONE
Heiko Schochere604e402010-07-19 23:46:48 +020030#define CONFIG_BAUDRATE 115200 /* console baudrate */
wdenk0608e042004-03-25 19:29:38 +000031
Heiko Schochere604e402010-07-19 23:46:48 +020032#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
wdenk0608e042004-03-25 19:29:38 +000033
Heiko Schochere604e402010-07-19 23:46:48 +020034#define CONFIG_BOARD_TYPES 1 /* support board types */
35
36#define CONFIG_SYS_8XX_FACT 8 /* Multiply by 8 */
37#define CONFIG_SYS_8XX_XIN 16000000 /* 16 MHz in */
wdenk0608e042004-03-25 19:29:38 +000038
39
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020040#define MPC8XX_HZ ((CONFIG_SYS_8XX_XIN) * (CONFIG_SYS_8XX_FACT))
wdenk0608e042004-03-25 19:29:38 +000041
42/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
43/* in general, we always know this for FADS+new ADS anyway */
44#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
45
46
47#undef CONFIG_BOOTARGS
48
49
50#define CONFIG_EXTRA_ENV_SETTINGS \
51"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off;" \
52 "run addhw;diskboot 200000 0:1;bootm 200000\0" \
Heiko Schochere604e402010-07-19 23:46:48 +020053"usb_boot=setenv bootargs root=/dev/sda2 ip=off; \
54 run addhw; sleep 2; usb reset; usb scan; usbboot 200000 0:1; \
55 usb stop; bootm 200000\0" \
wdenk0608e042004-03-25 19:29:38 +000056"nfs_boot=dhcp;run nfsargs addip addhw;bootm 200000\0" \
57"panic_boot=echo No Bootdevice !!! reset\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010058"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
wdenk0608e042004-03-25 19:29:38 +000059"ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010060"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}" \
61 ":${netmask}:${hostname}:${netdev}:off\0" \
62"addhw=setenv bootargs ${bootargs} hw=${hw} key1=${key1} panic=1\0" \
wdenk0608e042004-03-25 19:29:38 +000063"netdev=eth0\0" \
64"silent=1\0" \
65"load=tftp 200000 bootloader-4x.bitmap;tftp 100000 bootloader-4x.bin\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010066"update=protect off 1:0-5;era 1:0-5;cp.b 100000 40000000 ${filesize};" \
wdenk0608e042004-03-25 19:29:38 +000067 "cp.b 200000 40040000 14000\0"
68
69#define CONFIG_BOOTCOMMAND \
Heiko Schochere604e402010-07-19 23:46:48 +020070 "run usb_boot;run slot_a_boot;run nfs_boot;run panic_boot"
wdenk0608e042004-03-25 19:29:38 +000071
72
73#define CONFIG_MISC_INIT_R 1
74#define CONFIG_MISC_INIT_F 1
75
76#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Heiko Schochere604e402010-07-19 23:46:48 +020077#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenk0608e042004-03-25 19:29:38 +000078
wdenk02b11f82004-05-12 22:54:36 +000079#define CONFIG_WATCHDOG 1 /* watchdog enabled */
wdenk0608e042004-03-25 19:29:38 +000080
81#define CONFIG_STATUS_LED 1 /* Status LED enabled */
82
83#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
84
Jon Loeliger7be044e2007-07-09 21:24:19 -050085/*
86 * BOOTP options
87 */
88#define CONFIG_BOOTP_SUBNETMASK
89#define CONFIG_BOOTP_GATEWAY
90#define CONFIG_BOOTP_HOSTNAME
91#define CONFIG_BOOTP_BOOTPATH
92#define CONFIG_BOOTP_BOOTFILESIZE
93
wdenk0608e042004-03-25 19:29:38 +000094
95#define CONFIG_MAC_PARTITION
96#define CONFIG_DOS_PARTITION
97
wdenk02b11f82004-05-12 22:54:36 +000098/*
99 * enable I2C and select the hardware/software driver
100 */
Heiko Schocherea818db2013-01-29 08:53:15 +0100101#define CONFIG_SYS_I2C
102#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
wdenk0608e042004-03-25 19:29:38 +0000103
Heiko Schocherea818db2013-01-29 08:53:15 +0100104#ifdef CONFIG_SYS_I2C_SOFT
105#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
106#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
wdenk02b11f82004-05-12 22:54:36 +0000107
wdenk02b11f82004-05-12 22:54:36 +0000108/*
109 * Software (bit-bang) I2C driver configuration
110 */
111#define PB_SCL 0x00000020 /* PB 26 */
112#define PB_SDA 0x00000010 /* PB 27 */
113
114#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
115#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
116#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
117#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
118#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
119 else immr->im_cpm.cp_pbdat &= ~PB_SDA
120#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
121 else immr->im_cpm.cp_pbdat &= ~PB_SCL
122#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
Heiko Schocherea818db2013-01-29 08:53:15 +0100123#endif /* CONFIG_SYS_I2C_SOFT */
wdenk02b11f82004-05-12 22:54:36 +0000124
125
126/*-----------------------------------------------------------------------
127 * I2C Configuration
128 */
129
Heiko Schochere604e402010-07-19 23:46:48 +0200130#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */
131#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
wdenk02b11f82004-05-12 22:54:36 +0000132
133
134/* List of I2C addresses to be verified by POST */
135
Peter Tyser60aaaa02010-10-22 00:20:30 -0500136#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \
137 CONFIG_SYS_I2C_RTC_ADDR, \
138 }
wdenk02b11f82004-05-12 22:54:36 +0000139
140
141#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
142
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_DISCOVER_PHY
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200144#define CONFIG_MII
wdenk02b11f82004-05-12 22:54:36 +0000145
wdenk0608e042004-03-25 19:29:38 +0000146#undef CONFIG_KUP4K_LOGO
147
148/* Define to allow the user to overwrite serial and ethaddr */
149#define CONFIG_ENV_OVERWRITE
150
wdenk02b11f82004-05-12 22:54:36 +0000151
wdenk02b11f82004-05-12 22:54:36 +0000152/* POST support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_POST (CONFIG_SYS_POST_CPU | \
154 CONFIG_SYS_POST_RTC | \
155 CONFIG_SYS_POST_I2C)
wdenk02b11f82004-05-12 22:54:36 +0000156
wdenk0608e042004-03-25 19:29:38 +0000157
Jon Loeliger348f2582007-07-08 13:46:18 -0500158/*
159 * Command line configuration.
160 */
161#include <config_cmd_default.h>
162
163#define CONFIG_CMD_DATE
164#define CONFIG_CMD_DHCP
165#define CONFIG_CMD_FAT
166#define CONFIG_CMD_I2C
167#define CONFIG_CMD_IDE
168#define CONFIG_CMD_NFS
Jon Loeliger348f2582007-07-08 13:46:18 -0500169#define CONFIG_CMD_SNTP
170#define CONFIG_CMD_USB
171
Jon Loeligeraf075ee2007-07-08 17:02:01 -0500172#ifdef CONFIG_POST
173 #define CONFIG_CMD_DIAG
174#endif
wdenk0608e042004-03-25 19:29:38 +0000175
176/*
177 * Miscellaneous configurable options
178 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179#define CONFIG_SYS_LONGHELP /* undef to save memory */
180#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger348f2582007-07-08 13:46:18 -0500181#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk0608e042004-03-25 19:29:38 +0000183#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200184#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk0608e042004-03-25 19:29:38 +0000185#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
187#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
188#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk0608e042004-03-25 19:29:38 +0000189
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190#define CONFIG_SYS_MEMTEST_START 0x000400000 /* memtest works on */
191#define CONFIG_SYS_MEMTEST_END 0x003C00000 /* 4 ... 60 MB in DRAM */
192#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
wdenk0608e042004-03-25 19:29:38 +0000193
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200194#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk0608e042004-03-25 19:29:38 +0000195
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }
wdenk0608e042004-03-25 19:29:38 +0000197
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
wdenk0608e042004-03-25 19:29:38 +0000199
200/*
201 * Low Level Configuration Settings
202 * (address mappings, register initial values, etc.)
203 * You should know what you are doing if you make changes here.
204 */
205/*-----------------------------------------------------------------------
206 * Internal Memory Mapped Register
207 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208#define CONFIG_SYS_IMMR 0xFFF00000
wdenk0608e042004-03-25 19:29:38 +0000209
210/*-----------------------------------------------------------------------
211 * Definitions for initial stack pointer and data area (in DPRAM)
212 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
Wolfgang Denk553f0982010-10-26 13:32:32 +0200214#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200215#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk0608e042004-03-25 19:29:38 +0000217
218/*-----------------------------------------------------------------------
219 * Start addresses for the final memory configuration
220 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200221 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk0608e042004-03-25 19:29:38 +0000222 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_SYS_SDRAM_BASE 0x00000000
224#define CONFIG_SYS_FLASH_BASE 0x40000000
225#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 256 kB for Monitor */
226#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
227#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenk0608e042004-03-25 19:29:38 +0000228
229/*
230 * For booting Linux, the board info and command line data
231 * have to be in the first 8 MB of memory, since this is
232 * the maximum mapped by the Linux kernel during initialization.
233 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200234#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk0608e042004-03-25 19:29:38 +0000235
236/*-----------------------------------------------------------------------
237 * FLASH organization
238 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200239#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
240#define CONFIG_SYS_MAX_FLASH_SECT 19 /* max number of sectors on one chip */
wdenk0608e042004-03-25 19:29:38 +0000241
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200242#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
243#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenk0608e042004-03-25 19:29:38 +0000244
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200245#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200246#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
247#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
248#define CONFIG_ENV_SECT_SIZE 0x10000
wdenk0608e042004-03-25 19:29:38 +0000249
250/* Address and size of Redundant Environment Sector */
251#if 0
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200252#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
253#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
wdenk0608e042004-03-25 19:29:38 +0000254#endif
255/*-----------------------------------------------------------------------
256 * Hardware Information Block
257 */
wdenk02b11f82004-05-12 22:54:36 +0000258#if 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200259#define CONFIG_SYS_HWINFO_OFFSET 0x000F0000 /* offset of HW Info block */
260#define CONFIG_SYS_HWINFO_SIZE 0x00000100 /* size of HW Info block */
261#define CONFIG_SYS_HWINFO_MAGIC 0x4B26500D /* 'K&P<CR>' */
wdenk0608e042004-03-25 19:29:38 +0000262#endif
263/*-----------------------------------------------------------------------
264 * Cache Configuration
265 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger348f2582007-07-08 13:46:18 -0500267#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenk0608e042004-03-25 19:29:38 +0000269#endif
270
271/*-----------------------------------------------------------------------
272 * SYPCR - System Protection Control 11-9
273 * SYPCR can only be written once after reset!
274 *-----------------------------------------------------------------------
275 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
276 */
wdenk02b11f82004-05-12 22:54:36 +0000277#if 0 && defined(CONFIG_WATCHDOG) /* KUP uses external TPS3705 WD */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenk0608e042004-03-25 19:29:38 +0000279 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
280#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenk0608e042004-03-25 19:29:38 +0000282#endif
283
284/*-----------------------------------------------------------------------
285 * SIUMCR - SIU Module Configuration 11-6
286 *-----------------------------------------------------------------------
287 * PCMCIA config., multi-function pin tri-state
288 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200289#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
wdenk0608e042004-03-25 19:29:38 +0000290
291/*-----------------------------------------------------------------------
292 * TBSCR - Time Base Status and Control 11-26
293 *-----------------------------------------------------------------------
294 * Clear Reference Interrupt Status, Timebase freezing enabled
295 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenk0608e042004-03-25 19:29:38 +0000297
298
299/*-----------------------------------------------------------------------
300 * PISCR - Periodic Interrupt Status and Control 11-31
301 *-----------------------------------------------------------------------
302 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
303 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200304#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenk0608e042004-03-25 19:29:38 +0000305
306
307/*-----------------------------------------------------------------------
308 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
309 *-----------------------------------------------------------------------
310 * set the PLL, the low-power modes and the reset control (15-29)
311 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312#define CONFIG_SYS_PLPRCR ((CONFIG_SYS_8XX_FACT << PLPRCR_MFI_SHIFT) | \
wdenk0608e042004-03-25 19:29:38 +0000313 PLPRCR_SPLSS | PLPRCR_TEXPS)
314
315
316/*-----------------------------------------------------------------------
317 * SCCR - System Clock and reset Control Register 15-27
318 *-----------------------------------------------------------------------
319 * Set clock output, timebase and RTC source and divider,
320 * power management and some other internal clocks
321 */
322#define SCCR_MASK SCCR_EBDF00
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200323#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | \
wdenk0608e042004-03-25 19:29:38 +0000324 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
325 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
326 SCCR_DFALCD00)
327
328/*-----------------------------------------------------------------------
329 * PCMCIA stuff
330 *-----------------------------------------------------------------------
331 *
332 */
333
334/* KUP4K use both slots, SLOT_A as "primary". */
335#define CONFIG_PCMCIA_SLOT_A 1
336
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200337#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
338#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
339#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
340#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
341#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
342#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
343#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
344#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenk0608e042004-03-25 19:29:38 +0000345
346#define PCMCIA_SOCKETS_NO 1
347#define PCMCIA_MEM_WIN_NO 8
348/*-----------------------------------------------------------------------
349 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
350 *-----------------------------------------------------------------------
351 */
352
Pavel Herrmann8d1165e11a2012-10-09 07:01:56 +0000353#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
wdenk0608e042004-03-25 19:29:38 +0000354#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
355
356#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
357#define CONFIG_IDE_LED 1 /* LED for ide supported */
358#undef CONFIG_IDE_RESET /* reset for ide not supported */
359
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_IDE_MAXBUS 1
361#define CONFIG_SYS_IDE_MAXDEVICE 2
wdenk0608e042004-03-25 19:29:38 +0000362
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenk0608e042004-03-25 19:29:38 +0000364
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200365#define CONFIG_SYS_ATA_IDE1_OFFSET (4 * CONFIG_SYS_PCMCIA_MEM_SIZE)
wdenk0608e042004-03-25 19:29:38 +0000366
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200367#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenk0608e042004-03-25 19:29:38 +0000368
369/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200370#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenk0608e042004-03-25 19:29:38 +0000371
372/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200373#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenk0608e042004-03-25 19:29:38 +0000374
375/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenk0608e042004-03-25 19:29:38 +0000377
378
379/*-----------------------------------------------------------------------
380 *
381 *-----------------------------------------------------------------------
382 *
383 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200384#define CONFIG_SYS_DER 0
wdenk0608e042004-03-25 19:29:38 +0000385
386/*
387 * Init Memory Controller:
388 *
389 * BR0/1 and OR0/1 (FLASH)
390 */
391#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
392
393/* used to re-map FLASH both when starting from SRAM or FLASH:
394 * restrict access enough to keep SRAM working (if any)
395 * but not too much to meddle with FLASH accesses
396 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
398#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenk0608e042004-03-25 19:29:38 +0000399
400/*
401 * FLASH timing:
402 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200403#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
wdenk0608e042004-03-25 19:29:38 +0000404 OR_SCY_2_CLK | OR_EHTR | OR_BI)
405
Heiko Schochere604e402010-07-19 23:46:48 +0200406#define CONFIG_SYS_OR0_REMAP \
407 (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
408#define CONFIG_SYS_OR0_PRELIM \
409 (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
410#define CONFIG_SYS_BR0_PRELIM \
411 ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
wdenk0608e042004-03-25 19:29:38 +0000412
413
414/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200415#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenk0608e042004-03-25 19:29:38 +0000416
417
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200418#define CONFIG_SYS_MPTPR 0x400
wdenk0608e042004-03-25 19:29:38 +0000419
420/*
421 * MAMR settings for SDRAM
422 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200423#define CONFIG_SYS_MAMR 0x80802114
wdenk0608e042004-03-25 19:29:38 +0000424
425
426/*
Heiko Schochere604e402010-07-19 23:46:48 +0200427 * Chip Selects
428 */
429
430#define CONFIG_SYS_OR4 0xFFFF8926
431#define CONFIG_SYS_BR4 0x90000401
432
433#define LATCH_ADDR 0x90000200
434
wdenk0608e042004-03-25 19:29:38 +0000435#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
Heiko Schochere604e402010-07-19 23:46:48 +0200436
wdenk0608e042004-03-25 19:29:38 +0000437#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
438#define CONFIG_SILENT_CONSOLE 1
439
wdenk5cf91d62004-04-23 20:32:05 +0000440#define CONFIG_USB_STORAGE 1
441#define CONFIG_USB_SL811HS 1
442
wdenk0608e042004-03-25 19:29:38 +0000443#endif /* __CONFIG_H */