blob: 149a62ffe611ed83a2858807b5a935b34a9ca6e6 [file] [log] [blame]
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +09001#
2# GPIO infrastructure and drivers
3#
4
Simon Glassb2f9bac2021-08-08 12:20:24 -06005menuconfig GPIO
6 bool "GPIO support"
7 default y
8 help
9 Enable support for GPIOs (General-purpose Input/Output) in U-Boot.
10 GPIOs allow U-Boot to read the state of an input line (high or
11 low) and set the state of an output line. This can be used to
12 drive LEDs, control power to various system parts and read user
13 input. GPIOs can be useful to enable a 'sign-of-life' LED,
14 for example. Enable this option to build the drivers in
15 drivers/gpio as part of an U-Boot build.
16
17if GPIO
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +090018
Masahiro Yamadada333ae2014-10-23 22:26:09 +090019config DM_GPIO
20 bool "Enable Driver Model for GPIO drivers"
21 depends on DM
22 help
Simon Glassf94a1be2015-02-05 21:41:35 -070023 Enable driver model for GPIO access. The standard GPIO
24 interface (gpio_get_value(), etc.) is then implemented by
25 the GPIO uclass. Drivers provide methods to query the
26 particular GPIOs that they provide. The uclass interface
27 is defined in include/asm-generic/gpio.h.
Albert ARIBAUD \(3ADEV\)606f7042015-03-31 11:40:46 +020028
Simon Glassbcee8d62019-12-06 21:41:35 -070029config SPL_DM_GPIO
30 bool "Enable Driver Model for GPIO drivers in SPL"
Simon Glass83061db2021-07-10 21:14:30 -060031 depends on DM_GPIO && SPL_DM && SPL_GPIO
Simon Glassbcee8d62019-12-06 21:41:35 -070032 default y
33 help
34 Enable driver model for GPIO access in SPL. The standard GPIO
35 interface (gpio_get_value(), etc.) is then implemented by
36 the GPIO uclass. Drivers provide methods to query the
37 particular GPIOs that they provide. The uclass interface
38 is defined in include/asm-generic/gpio.h.
39
40config TPL_DM_GPIO
41 bool "Enable Driver Model for GPIO drivers in TPL"
Simon Glass83061db2021-07-10 21:14:30 -060042 depends on DM_GPIO && TPL_DM && TPL_GPIO
Simon Glassbcee8d62019-12-06 21:41:35 -070043 default y
44 help
45 Enable driver model for GPIO access in TPL. The standard GPIO
46 interface (gpio_get_value(), etc.) is then implemented by
47 the GPIO uclass. Drivers provide methods to query the
48 particular GPIOs that they provide. The uclass interface
49 is defined in include/asm-generic/gpio.h.
50
Simon Glass747093d2022-04-30 00:56:53 -060051config VPL_DM_GPIO
52 bool "Enable Driver Model for GPIO drivers in VPL"
53 depends on DM_GPIO && VPL_DM && VPL_GPIO
54 default y
55 help
56 Enable driver model for GPIO access in VPL. The standard GPIO
57 interface (gpio_get_value(), etc.) is then implemented by
58 the GPIO uclass. Drivers provide methods to query the
59 particular GPIOs that they provide. The uclass interface
60 is defined in include/asm-generic/gpio.h.
61
Heiko Schocher49b10cb2019-07-17 06:59:51 +020062config GPIO_HOG
Heiko Schocher5fc7cf82019-06-12 06:11:46 +020063 bool "Enable GPIO hog support"
64 depends on DM_GPIO
Heiko Schocher5fc7cf82019-06-12 06:11:46 +020065 help
66 Enable gpio hog support
67 The GPIO chip may contain GPIO hog definitions. GPIO hogging
68 is a mechanism providing automatic GPIO request and config-
69 uration as part of the gpio-controller's driver probe function.
70
Eddie James1d99e672022-02-07 17:09:01 -060071config SPL_GPIO_HOG
72 bool "Enable GPIO hog support in SPL"
73 depends on SPL_GPIO_SUPPORT
74 help
75 Enable gpio hog support in SPL
76 The GPIO chip may contain GPIO hog definitions. GPIO hogging
77 is a mechanism providing automatic GPIO request and config-
78 uration as part of the gpio-controller's driver probe function.
79
Heiko Schocher2bd261d2020-05-22 11:08:59 +020080config DM_GPIO_LOOKUP_LABEL
81 bool "Enable searching for gpio labelnames"
82 depends on DM_GPIO
83 help
84 This option enables searching for gpio names in
85 the defined gpio labels, if the search for the
86 gpio bank name failed. This makes sense if you use
87 different gpios on different hardware versions
88 for the same functionality in board code.
89
90config SPL_DM_GPIO_LOOKUP_LABEL
91 bool "Enable searching for gpio labelnames"
Simon Glass83061db2021-07-10 21:14:30 -060092 depends on DM_GPIO && SPL_DM && SPL_GPIO
Heiko Schocher2bd261d2020-05-22 11:08:59 +020093 help
94 This option enables searching for gpio names in
95 the defined gpio labels, if the search for the
96 gpio bank name failed. This makes sense if you use
97 different gpios on different hardware versions
98 for the same functionality in board code.
99
Thomas Chou88d5ecf2015-10-21 21:33:45 +0800100config ALTERA_PIO
101 bool "Altera PIO driver"
102 depends on DM_GPIO
103 help
104 Select this to enable PIO for Altera devices. Please find
105 details on the "Embedded Peripherals IP User Guide" of Altera.
106
Tom Rini797c2b42022-03-21 21:33:30 -0400107config BCM2835_GPIO
108 bool "BCM2835 GPIO driver"
109 depends on DM_GPIO
110
Álvaro Fernández Rojase64bdb22017-05-07 20:09:30 +0200111config BCM6345_GPIO
112 bool "BCM6345 GPIO driver"
Philippe Reynes17f34ca2020-01-07 20:14:15 +0100113 depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \
Philippe Reynesc19eaef2022-02-11 19:18:35 +0100114 ARCH_BCM6858 || ARCH_BCM63158 || \
115 ARCH_BCM6753)
Álvaro Fernández Rojase64bdb22017-05-07 20:09:30 +0200116 help
117 This driver supports the GPIO banks on BCM6345 SoCs.
118
Jason Li2ccacf32020-01-30 12:34:56 -0800119config CORTINA_GPIO
120 bool "Cortina-Access GPIO driver"
121 depends on DM_GPIO && CORTINA_PLATFORM
122 help
123 Enable support for the GPIO controller in Cortina CAxxxx SoCs.
124 This driver supports all CPU ISA variants supported by Cortina
125 Access CAxxxx SoCs.
126
Marek Vasute30a70c2015-06-23 15:54:19 +0200127config DWAPB_GPIO
128 bool "DWAPB GPIO driver"
129 depends on DM && DM_GPIO
Marek Vasute30a70c2015-06-23 15:54:19 +0200130 help
131 Support for the Designware APB GPIO driver.
132
Wenyou Yang5a07a5f2017-03-23 12:46:19 +0800133config AT91_GPIO
134 bool "AT91 PIO GPIO driver"
Wenyou Yang5a07a5f2017-03-23 12:46:19 +0800135 help
136 Say yes here to select AT91 PIO GPIO driver. AT91 PIO
137 controller manages up to 32 fully programmable input/output
138 lines. Each I/O line may be dedicated as a general-purpose
139 I/O or be assigned to a function of an embedded peripheral.
140 The assignment to a function of an embedded peripheral is
141 the responsibility of AT91 Pinctrl driver. This driver is
142 responsible for the general-purpose I/O.
143
Wenyou Yang2c62c562015-11-04 14:25:13 +0800144config ATMEL_PIO4
145 bool "ATMEL PIO4 driver"
Wenyou Yangee3311d2016-07-20 17:16:26 +0800146 depends on DM_GPIO
Wenyou Yang2c62c562015-11-04 14:25:13 +0800147 help
148 Say yes here to support the Atmel PIO4 driver.
149 The PIO4 is new version of Atmel PIO controller, which manages
150 up to 128 fully programmable input/output lines. Each I/O line
151 may be dedicated as a general purpose I/O or be assigned to
152 a function of an embedded peripheral.
153
Andrew Jeffery7ad889b2022-02-16 10:26:56 +1030154config ASPEED_GPIO
155 bool "Aspeed GPIO Driver"
156 help
157 Say yes here to support the Aspeed GPIO driver. The controller
158 is found in the AST2400, AST2500 and AST2600 BMC SoCs and
159 provides access to over 200 GPIOs on each chip.
160
Adam Ford5d653af2018-07-10 07:01:20 -0500161config DA8XX_GPIO
162 bool "DA8xx GPIO Driver"
163 help
164 This driver supports the DA8xx GPIO controller
165
Oleksandr Suvorov99dd2542021-11-21 18:05:16 +0200166config FXL6408_GPIO
167 bool "FXL6408 I2C GPIO expander driver"
168 depends on DM_GPIO && DM_I2C
169 help
170 This driver supports the Fairchild FXL6408 device. FXL6408 is a
171 fully configurable 8-bit I2C-controlled GPIO expander.
172
Simon Glass64b17972016-03-11 22:07:27 -0700173config INTEL_BROADWELL_GPIO
174 bool "Intel Broadwell GPIO driver"
175 depends on DM
176 help
177 This driver supports Broadwell U devices which have an expanded
178 GPIO feature set. The difference is large enough to merit a separate
179 driver from the common Intel ICH6 driver. It supports a total of
180 95 GPIOs which can be configured from the device tree.
181
Simon Glass7e589bc2019-12-06 21:42:54 -0700182config INTEL_GPIO
183 bool "Intel generic GPIO driver"
184 depends on DM_GPIO
185 help
186 Say yes here to select Intel generic GPIO driver. This controller
187 supports recent chips (e.g. Apollo Lake). It permits basic GPIO
188 control including setting pins to input/output. It makes use of its
189 parent pinctrl driver to actually effect changes.
190
Bin Meng72436892017-07-30 06:23:28 -0700191config INTEL_ICH6_GPIO
192 bool "Intel ICH6 compatible legacy GPIO driver"
193 depends on DM_GPIO
194 help
195 Say yes here to select Intel ICH6 compatible legacy GPIO driver.
196
Peng Fand665eb62017-02-22 16:21:45 +0800197config IMX_RGPIO2P
198 bool "i.MX7ULP RGPIO2P driver"
199 depends on DM
Peng Fand665eb62017-02-22 16:21:45 +0800200 help
201 This driver supports i.MX7ULP Rapid GPIO2P controller.
202
Rayagonda Kokatanura7090b42020-05-05 23:26:46 +0530203config IPROC_GPIO
204 bool "Broadcom iProc GPIO driver(without pinconf)"
Rayagonda Kokatanura7090b42020-05-05 23:26:46 +0530205 help
206 The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray,
207 use the same GPIO Controller IP hence this driver could be used
208 for all.
209
210 The Broadcom iProc based SoCs have multiple GPIO controllers and only
211 the always-ON GPIO controller (CRMU/AON) is supported by this driver.
212
Eugeniy Paltsev3194c3c2017-10-16 16:21:32 +0300213config HSDK_CREG_GPIO
214 bool "HSDK CREG GPIO griver"
Alexey Brodkind5fbcd52017-12-10 20:55:44 +0300215 depends on DM_GPIO
Eugeniy Paltsev3194c3c2017-10-16 16:21:32 +0300216 help
217 This driver supports CREG GPIOs on Synopsys HSDK SOC.
218
Tom Rinib2d1c822021-12-17 18:08:46 -0500219config KIRKWOOD_GPIO
220 bool "Kirkwood GPIO driver"
221 help
222 This drdiver supports GPIOs on Kirkwood platforms
223
Albert ARIBAUD \(3ADEV\)606f7042015-03-31 11:40:46 +0200224config LPC32XX_GPIO
225 bool "LPC32XX GPIO driver"
226 depends on DM
Albert ARIBAUD \(3ADEV\)606f7042015-03-31 11:40:46 +0200227 help
228 Support for the LPC32XX GPIO driver.
Simon Glassd79c50a2015-03-06 13:19:01 -0700229
Hannes Schmelzerbba76a12021-10-01 13:37:57 +0200230config MAX7320_GPIO
231 bool "MAX7320 I2C GPIO Expander driver"
232 depends on DM_GPIO && DM_I2C
233 help
234 Support for MAX7320 I2C 8/16-bit GPIO expander.
235 original maxim device has 8 push/pull outputs,
236 some clones offers 16bit.
237
Sebastian Reichel0b3da992021-07-15 17:40:00 +0200238config MCP230XX_GPIO
239 bool "MCP230XX GPIO driver"
240 depends on DM
241 help
242 Support for Microchip's MCP230XX I2C connected GPIO devices.
243 The following chips are supported:
244 - MCP23008
245 - MCP23017
246 - MCP23018
247
Lars Povlsenbe8313f2019-01-02 09:52:21 +0100248config MSCC_SGPIO
249 bool "Microsemi Serial GPIO driver"
250 depends on DM_GPIO && SOC_VCOREIII
251 help
252 Support for the VCoreIII SoC serial GPIO device. By using a
253 serial interface, the SIO controller significantly extends
254 the number of available GPIOs with a minimum number of
255 additional pins on the device. The primary purpose of the
256 SIO controller is to connect control signals from SFP
257 modules and to act as an LED controller.
258
Mateusz Kulikowski81a87e12016-03-31 23:12:15 +0200259config MSM_GPIO
260 bool "Qualcomm GPIO driver"
261 depends on DM_GPIO
Mateusz Kulikowski81a87e12016-03-31 23:12:15 +0200262 help
263 Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
264 This controller have single bank (default name "soc"), every
265 gpio has it's own set of registers.
266 Only simple GPIO operations are supported (get/set, change of
267 direction and checking pin function).
268 Supported devices:
269 - APQ8016
270 - MSM8916
271
Adam Ford8bbff6a2018-02-04 09:32:43 -0600272config MXC_GPIO
Hannes Schmelzer8fd05fc2018-06-07 12:10:09 +0200273 bool "Freescale/NXP MXC GPIO driver"
Adam Ford8bbff6a2018-02-04 09:32:43 -0600274 help
275 Support GPIO controllers on various i.MX platforms
276
Lukasz Majewski54847932019-08-13 18:10:39 +0200277config MXS_GPIO
278 bool "Freescale/NXP MXS GPIO driver"
279 help
280 Support GPIO controllers on i.MX23 and i.MX28 platforms
281
Stanley Chu344e86c2022-02-25 10:14:50 +0800282config NPCM_GPIO
283 bool "Nuvoton NPCM GPIO driver"
284 depends on DM_GPIO
285 help
286 Support GPIO controllers on Nuvovon NPCM SoCs.
287 NPCM7xx/NPCM8xx contain 8 GPIO banks, each bank contains 32 pins.
288
Tom Rini29cb2b32017-05-12 22:33:21 -0400289config OMAP_GPIO
290 bool "TI OMAP GPIO driver"
291 depends on ARCH_OMAP2PLUS
292 default y
293 help
294 Support GPIO controllers on the TI OMAP3/4/5 and related (such as
295 AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
296
Simon Glass00913622017-08-04 16:34:32 -0600297config CMD_PCA953X
298 bool "Enable the pca953x command"
299 help
300 Deprecated: This should be converted to driver model.
301
302 This command provides access to a pca953x GPIO device using the
303 legacy GPIO interface. Several subcommands are provided which mirror
304 the standard 'gpio' command. It should use that instead.
305
Mateusz Kulikowski120800d2016-03-31 23:12:31 +0200306config PM8916_GPIO
307 bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
308 depends on DM_GPIO && PMIC_PM8916
309 help
310 Support for GPIO pins and power/reset buttons found on
311 Qualcomm PM8916 PMIC.
312 Default name for GPIO bank is "pm8916".
313 Power and reset buttons are placed in "pm8916_key" bank and
314 have gpio numbers 0 and 1 respectively.
315
Vignesh R5746b0d2016-08-02 10:14:24 +0530316config PCF8575_GPIO
317 bool "PCF8575 I2C GPIO Expander driver"
318 depends on DM_GPIO && DM_I2C
319 help
320 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
321 chips are from NXP and TI.
322
Marek Vasutf5f69592017-09-15 21:13:56 +0200323config RCAR_GPIO
324 bool "Renesas RCar GPIO driver"
325 depends on DM_GPIO && ARCH_RMOBILE
326 help
327 This driver supports the GPIO banks on Renesas RCar SoCs.
328
Marek Vasut86b8e7d2019-05-04 16:00:17 +0200329config RZA1_GPIO
330 bool "Renesas RZ/A1 GPIO driver"
331 depends on DM_GPIO && RZA1
332 help
333 This driver supports the GPIO banks on Renesas RZ/A1 R7S72100 SoCs.
334
Simon Glass1f8f7732015-08-30 16:55:27 -0600335config ROCKCHIP_GPIO
336 bool "Rockchip GPIO driver"
337 depends on DM_GPIO
338 help
339 Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
340 a number of banks (different for each SoC type) each with 32 GPIOs.
341 The GPIOs for a device are defined in the device tree with one node
342 for each bank.
343
Simon Glassd79c50a2015-03-06 13:19:01 -0700344config SANDBOX_GPIO
345 bool "Enable sandbox GPIO driver"
346 depends on SANDBOX && DM && DM_GPIO
347 help
348 This driver supports some simulated GPIOs which can be adjusted
349 using 'back door' functions like sandbox_gpio_set_value(). Then the
350 GPIOs can be inspected through the normal get_get_value()
351 interface. The purpose of this is to allow GPIOs to be used as
352 normal in sandbox, perhaps with test code actually driving the
353 behaviour of those GPIOs.
354
355config SANDBOX_GPIO_COUNT
356 int "Number of sandbox GPIOs"
357 depends on SANDBOX_GPIO
358 default 128
359 help
360 The sandbox driver can support any number of GPIOs. Generally these
361 are specified using the device tree. But you can also have a number
362 of 'anonymous' GPIOs that do not belong to any device or bank.
363 Select a suitable value depending on your needs.
Bhuvanchandra DVd348a942015-06-01 18:37:16 +0530364
Andre Przywara10cfbaa2019-06-23 15:09:46 +0100365config SUNXI_GPIO
366 bool "Allwinner GPIO driver"
367 depends on ARCH_SUNXI
368 help
369 Support the GPIO device in Allwinner SoCs.
370
Vipul Kumar71d5a142018-02-28 11:32:22 +0530371config XILINX_GPIO
372 bool "Xilinx GPIO driver"
Michal Simek4a693662018-07-13 08:26:28 +0200373 depends on DM_GPIO
Vipul Kumar71d5a142018-02-28 11:32:22 +0530374 help
375 This config enable the Xilinx GPIO driver for Microblaze.
376
Simon Glass90d99e52017-08-04 16:34:54 -0600377config CMD_TCA642X
378 bool "tca642x - Command to access tca642x state"
379 help
380 DEPRECATED - This needs conversion to driver model
381
382 This provides a way to looking at the pin state of this device.
383 This mirrors the 'gpio' command and that should be used in preference
384 to custom code.
385
Stephen Warren601800b2016-05-12 12:07:41 -0600386config TEGRA_GPIO
387 bool "Tegra20..210 GPIO driver"
388 depends on DM_GPIO
389 help
390 Support for the GPIO controller contained in NVIDIA Tegra20 through
391 Tegra210.
392
Stephen Warren074a1fd2016-05-25 14:38:51 -0600393config TEGRA186_GPIO
394 bool "Tegra186 GPIO driver"
395 depends on DM_GPIO
396 help
397 Support for the GPIO controller contained in NVIDIA Tegra186. This
398 covers both the "main" and "AON" controller instances, even though
399 they have slightly different register layout.
400
Masahiro Yamadab9a66b62016-02-16 17:03:48 +0900401config GPIO_UNIPHIER
402 bool "UniPhier GPIO"
403 depends on ARCH_UNIPHIER
404 help
405 Say yes here to support UniPhier GPIOs.
406
Bhuvanchandra DVd348a942015-06-01 18:37:16 +0530407config VYBRID_GPIO
408 bool "Vybrid GPIO driver"
409 depends on DM
Bhuvanchandra DVd348a942015-06-01 18:37:16 +0530410 help
411 Say yes here to support Vybrid vf610 GPIOs.
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900412
Purna Chandra Mandal386d9342016-01-28 15:30:13 +0530413config PIC32_GPIO
414 bool "Microchip PIC32 GPIO driver"
415 depends on DM_GPIO && MACH_PIC32
416 default y
417 help
418 Say yes here to support Microchip PIC32 GPIOs.
419
Suneel Garapatif7331c62020-07-30 13:56:13 +0200420config OCTEON_GPIO
421 bool "Octeon II/III/TX/TX2 GPIO driver"
Simon Glass3232bdf2021-08-01 18:54:44 -0600422 depends on DM_GPIO && PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
Suneel Garapatif7331c62020-07-30 13:56:13 +0200423 default y
424 help
425 Add support for the Marvell Octeon GPIO driver. This is used with
426 various Octeon parts such as Octeon II/III and OcteonTX/TX2.
427 Octeon II/III has 32 GPIOs (count defined via DT) and OcteonTX/TX2
428 has 64 GPIOs (count defined via internal register).
429
Patrice Chotard95fbdd12019-06-21 15:39:22 +0200430config STM32_GPIO
Vikas Manocha77417102017-04-10 15:02:57 -0700431 bool "ST STM32 GPIO driver"
Trevor Woerner71f63542020-05-06 08:02:42 -0400432 depends on DM_GPIO && (ARCH_STM32 || ARCH_STM32MP)
Vikas Manocha77417102017-04-10 15:02:57 -0700433 default y
434 help
435 Device model driver support for STM32 GPIO controller. It should be
Patrice Chotard95fbdd12019-06-21 15:39:22 +0200436 usable on many stm32 families like stm32f4/f7/h7 and stm32mp1.
Vikas Manocha77417102017-04-10 15:02:57 -0700437 Tested on STM32F7.
438
Sagar Shrikant Kadamd26b4042019-10-01 10:00:46 -0700439config SIFIVE_GPIO
440 bool "SiFive GPIO driver"
441 depends on DM_GPIO
442 help
443 Device model driver for GPIO controller present in SiFive FU540 SoC. This
444 driver enables GPIO interface on HiFive Unleashed A00 board.
445
Stefan Roese704d9a62016-02-12 13:46:50 +0100446config MVEBU_GPIO
447 bool "Marvell MVEBU GPIO driver"
Harm Berntsen98b64fe2020-11-29 10:08:02 +0000448 depends on DM_GPIO && (ARCH_MVEBU || ARCH_KIRKWOOD)
Stefan Roese704d9a62016-02-12 13:46:50 +0100449 default y
450 help
451 Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
452
Siva Durga Prasad Paladugu2978ae22016-03-10 16:27:39 +0530453config ZYNQ_GPIO
454 bool "Zynq GPIO driver"
Michal Simek664e16c2020-08-06 15:18:36 +0200455 depends on DM_GPIO
456 default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
Siva Durga Prasad Paladugu2978ae22016-03-10 16:27:39 +0530457 help
458 Supports GPIO access on Zynq SoC.
459
Peng Fan9300f712016-05-03 10:02:23 +0800460config DM_74X164
461 bool "74x164 serial-in/parallel-out 8-bits shift register"
462 depends on DM_GPIO
463 help
464 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
465 shift registers, such as 74lv165, 74hc595.
466 This driver can be used to provide access to more gpio outputs.
467
Peng Fan03773432016-04-14 21:45:06 +0800468config DM_PCA953X
469 bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
Michal Simekca8bb0c2021-06-02 12:40:45 +0200470 depends on DM_GPIO && DM_I2C
Peng Fan03773432016-04-14 21:45:06 +0800471 help
472 Say yes here to provide access to several register-oriented
473 SMBus I/O expanders, made mostly by NXP or TI. Compatible
474 models include:
475
476 4 bits: pca9536, pca9537
477
478 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
479 pca9556, pca9557, pca9574, tca6408, xra1202
480
481 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
482 tca6416
483
484 24 bits: tca6424
485
486 40 bits: pca9505, pca9698
487
488 Now, max 24 bits chips and PCA953X compatible chips are
489 supported
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200490
Peng Fan16103682018-12-21 06:21:21 +0000491config SPL_DM_PCA953X
492 bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
493 depends on DM_GPIO
494 help
495 Say yes here to provide access to several register-oriented
496 SMBus I/O expanders, made mostly by NXP or TI. Compatible
497 models include:
498
499 4 bits: pca9536, pca9537
500
501 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
502 pca9556, pca9557, pca9574, tca6408, xra1202
503
504 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
505 tca6416
506
507 24 bits: tca6424
508
509 40 bits: pca9505, pca9698
510
511 Now, max 24 bits chips and PCA953X compatible chips are
512 supported
513
Mario Six3c216832018-01-15 11:07:48 +0100514config MPC8XXX_GPIO
515 bool "Freescale MPC8XXX GPIO driver"
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200516 depends on DM_GPIO
517 help
Mario Six3c216832018-01-15 11:07:48 +0100518 This driver supports the built-in GPIO controller of MPC8XXX CPUs.
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200519 Each GPIO bank is identified by its own entry in the device tree,
520 i.e.
521
522 gpio-controller@fc00 {
523 #gpio-cells = <2>;
524 compatible = "fsl,pq3-gpio";
525 reg = <0xfc00 0x100>
526 }
527
528 By default, each bank is assumed to have 32 GPIOs, but the ngpios
529 setting is honored, so the number of GPIOs for each bank is
530 configurable to match the actual GPIO count of the SoC (e.g. the
531 32/32/23 banks of the P1022 SoC).
532
mario.six@gdsys.cc51781782016-05-25 15:15:22 +0200533 Aside from the standard functions of input/output mode, and output
534 value setting, the open-drain feature, which can configure individual
535 GPIOs to work as open-drain outputs, is supported.
Stefan Roese4751e552018-10-08 12:38:01 +0200536
Klaus H. Sorensen3fb22bc2020-02-11 15:20:22 +0000537config MPC83XX_SPISEL_BOOT
538 bool "Freescale MPC83XX SPISEL_BOOT driver"
539 depends on DM_GPIO && ARCH_MPC830X
540 help
541 GPIO driver to set/clear dedicated SPISEL_BOOT output on MPC83XX.
542
543 This pin is typically used as spi chip select to a spi nor flash.
544
Weijie Gaoca610dd2020-11-12 16:36:33 +0800545config MT7620_GPIO
546 bool "MediaTek MT7620 GPIO driver"
547 depends on DM_GPIO && SOC_MT7620
548 default y
549 help
550 Device model driver for GPIO controller present in MediaTek MT7620
551 and earlier SoCs.
552
Stefan Roese4751e552018-10-08 12:38:01 +0200553config MT7621_GPIO
554 bool "MediaTek MT7621 GPIO driver"
Weijie Gao16b94902019-04-30 11:13:58 +0800555 depends on DM_GPIO && SOC_MT7628
Stefan Roese4751e552018-10-08 12:38:01 +0200556 default y
557 help
558 Say yes here to support MediaTek MT7621 compatible GPIOs.
559
Stefan Boschb8f748d2020-07-10 19:07:27 +0200560config NX_GPIO
561 bool "Nexell GPIO driver"
562 depends on DM_GPIO
563 help
564 Support GPIO access on Nexell SoCs. The GPIOs are arranged into
565 a number of banks (different for each SoC type) each with 32 GPIOs.
566 The GPIOs for a device are defined in the device tree with one node
567 for each bank.
568
Stephan Gerhold1e0b4c02021-07-02 17:06:18 +0200569config NOMADIK_GPIO
570 bool "Nomadik GPIO driver"
571 depends on DM_GPIO
572 help
573 Support GPIO access on ST-Ericsson Ux500 SoCs. The GPIOs are arranged
574 into a number of banks each with 32 GPIOs. The GPIOs for a device are
575 defined in the device tree with one node for each bank.
576
T Karthik Reddy3b441cf2021-10-29 13:11:43 +0200577config ZYNQMP_GPIO_MODEPIN
578 bool "ZynqMP gpio modepin"
579 depends on DM_GPIO
580 help
581 This config enables the ZynqMP gpio modepin driver. ZynqMP modepin
582 driver will set and get the status of PS_MODE pins. These modepins
583 are accessed using xilinx firmware. In modepin register, [3:0] bits
584 set direction, [7:4] bits read IO, [11:8] bits set/clear IO.
585
Michael Walle07d6cb92022-02-25 18:10:24 +0530586config SL28CPLD_GPIO
587 bool "Kontron sl28cpld GPIO driver"
588 depends on DM_GPIO && SL28CPLD
589 help
590 Support GPIO access on Kontron sl28cpld board management controllers.
591
T Karthik Reddy15efe0f2022-02-23 16:21:30 +0100592config SLG7XL45106_I2C_GPO
593 bool "slg7xl45106 i2c gpo expander"
594 depends on DM_GPIO
595 help
596 Support for slg7xl45106 i2c gpo expander. It is an i2c based
597 8-bit gpo expander, all gpo lines are controlled by writing
598 value into data register.
599
Simon Glassb2f9bac2021-08-08 12:20:24 -0600600endif