cpu/ppc4xx/sdram.c

/*
 * (C) Copyright 2002
 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include <pci.h>


#ifdef CONFIG_SDRAM_BANK0


#define MAGIC0 0x00000000
#define MAGIC1 0x11111111
#define MAGIC2 0x22222222
#define MAGIC3 0x33333333
#define MAGIC4 0x44444444
#define MAGIC5 0x55555555
#define MAGIC6 0x66666666

#define ADDR_ZERO 0x00000000
#define ADDR_400  0x00000400
#define ADDR_01MB 0x00100000
#define ADDR_08MB 0x00800000
#define ADDR_16MB 0x01000000
#define ADDR_32MB 0x02000000
#define ADDR_64MB 0x04000000
#define ADDR_128MB 0x08000000

#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)


/*-----------------------------------------------------------------------
 */
void sdram_init(void)
{
	ulong speed;
	ulong sdtr1;
	ulong rtr;

	/*
	 * Determine SDRAM speed
	 */
	speed = get_bus_freq(0); /* parameter not used on ppc4xx */

	/*
	 * Support for 100MHz and 133MHz SDRAM
	 */
	if (speed > 100000000) {
		/*
		 * 133 MHz SDRAM
		 */
		sdtr1 = 0x01074015;
		rtr = 0x07f00000;
	} else {
		/*
		 * default: 100 MHz SDRAM
		 */
		sdtr1 = 0x0086400d;
		rtr = 0x05f00000;
	}

	/*
	 * Disable memory controller.
	 */
	mtsdram0(mem_mcopt1, 0x00000000);

	/*
	 * Set MB0CF for bank 0. (0-128MB) Address Mode 3 since 13x10(4)
	 */
	mtsdram0(mem_mb0cf, 0x000A4001);

	mtsdram0(mem_sdtr1, sdtr1);
	mtsdram0(mem_rtr, rtr);

	/*
	 * Wait for 200us
	 */
	udelay(200);

	/*
	 * Set memory controller options reg, MCOPT1.
	 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
	 * read/prefetch.
	 */
	mtsdram0(mem_mcopt1, 0x80800000);

	/*
	 * Wait for 10ms
	 */
	udelay(10000);

	/*
	 * Test if 128 MByte are equipped (mirror test)
	 */
	*(volatile ulong *)ADDR_ZERO = MAGIC0;
	*(volatile ulong *)ADDR_08MB = MAGIC1;
	*(volatile ulong *)ADDR_16MB = MAGIC2;
	*(volatile ulong *)ADDR_32MB = MAGIC3;
	*(volatile ulong *)ADDR_64MB = MAGIC4;

	if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
	    (*(volatile ulong *)ADDR_08MB == MAGIC1) &&
	    (*(volatile ulong *)ADDR_16MB == MAGIC2) &&
	    (*(volatile ulong *)ADDR_32MB == MAGIC3)) {
		/*
		 * OK, 128MB detected -> all done
		 */
		return;
	}

	/*
	 * Now test for 64 MByte...
	 */

	/*
	 * Disable memory controller.
	 */
	mtsdram0(mem_mcopt1, 0x00000000);

	/*
	 * Set MB0CF for bank 0. (0-64MB) Address Mode 3 since 13x9(4)
	 */
	mtsdram0(mem_mb0cf, 0x00084001);

	mtsdram0(mem_sdtr1, sdtr1);
	mtsdram0(mem_rtr, rtr);

	/*
	 * Wait for 200us
	 */
	udelay(200);

	/*
	 * Set memory controller options reg, MCOPT1.
	 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
	 * read/prefetch.
	 */
	mtsdram0(mem_mcopt1, 0x80800000);

	/*
	 * Wait for 10ms
	 */
	udelay(10000);

	/*
	 * Test if 64 MByte are equipped (mirror test)
	 */
	*(volatile ulong *)ADDR_ZERO = MAGIC0;
	*(volatile ulong *)ADDR_08MB = MAGIC1;
	*(volatile ulong *)ADDR_16MB = MAGIC2;
	*(volatile ulong *)ADDR_32MB = MAGIC3;

	if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
	    (*(volatile ulong *)ADDR_08MB == MAGIC1) &&
	    (*(volatile ulong *)ADDR_16MB == MAGIC2)) {
		/*
		 * OK, 64MB detected -> all done
		 */
		return;
	}

	/*
	 * Now test for 32 MByte...
	 */

	/*
	 * Disable memory controller.
	 */
	mtsdram0(mem_mcopt1, 0x00000000);

	/*
	 * Set MB0CF for bank 0. (0-32MB) Address Mode 2 since 12x9(4)
	 */
	mtsdram0(mem_mb0cf, 0x00062001);

	/*
	 * Set memory controller options reg, MCOPT1.
	 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
	 * read/prefetch.
	 */
	mtsdram0(mem_mcopt1, 0x80800000);

	/*
	 * Wait for 10ms
	 */
	udelay(10000);

	/*
	 * Test if 32 MByte are equipped (mirror test)
	 */
	*(volatile ulong *)ADDR_ZERO = MAGIC0;
	*(volatile ulong *)ADDR_400  = MAGIC1;
	*(volatile ulong *)ADDR_08MB = MAGIC2;
	*(volatile ulong *)ADDR_16MB = MAGIC3;

	if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
	    (*(volatile ulong *)ADDR_400  == MAGIC1) &&
	    (*(volatile ulong *)ADDR_08MB == MAGIC2)) {
		/*
		 * OK, 32MB detected -> all done
		 */
		return;
	}

	/*
	 * Now test for 16 MByte...
	 */
	/*
	 * Disable memory controller.
	 */
	mtsdram0(mem_mcopt1, 0x00000000);

	/*
	 * Set MB0CF for bank 0. (0-16MB) Address Mode 4 since 12x8(4)
	 */
	mtsdram0(mem_mb0cf, 0x00046001);

	/*
	 * Set memory controller options reg, MCOPT1.
	 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
	 * read/prefetch.
	 */
	mtsdram0(mem_mcopt1, 0x80800000);

	/*
	 * Wait for 10ms
	 */
	udelay(10000);

	/*
	 * Test if 16 MByte are equipped (mirror test)
	 */
	*(volatile ulong *)ADDR_ZERO = MAGIC0;
	*(volatile ulong *)ADDR_400  = MAGIC1;
	*(volatile ulong *)ADDR_01MB = MAGIC5;
	*(volatile ulong *)ADDR_08MB = MAGIC2;
/*	*(volatile ulong *)ADDR_16MB = MAGIC3;*/

	if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
	    (*(volatile ulong *)ADDR_400  == MAGIC1) &&
	    (*(volatile ulong *)ADDR_01MB == MAGIC5) &&
	    (*(volatile ulong *)ADDR_08MB == MAGIC2)) {
		/*
		 * OK, 16MB detected -> all done
		 */
		return;
	}

	/*
	 * Setup for 4 MByte...
	 */

	/*
	 * Disable memory controller.
	 */
	mtsdram0(mem_mcopt1, 0x00000000);

	/*
	 * Set MB0CF for bank 0. (0-4MB) Address Mode 5 since 11x8(2)
	 */
	mtsdram0(mem_mb0cf, 0x00008001);

	/*
	 * Set memory controller options reg, MCOPT1.
	 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
	 * read/prefetch.
	 */
	mtsdram0(mem_mcopt1, 0x80800000);

	/*
	 * Wait for 10ms
	 */
	udelay(10000);
}

#endif /* CONFIG_SDRAM_BANK0 */