Dinh Nguyen | 9bbd213 | 2015-06-02 22:52:48 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright Altera Corporation (C) 2014-2015 |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | #include <common.h> |
| 7 | #include <div64.h> |
| 8 | #include <watchdog.h> |
| 9 | #include <asm/arch/fpga_manager.h> |
| 10 | #include <asm/arch/sdram.h> |
Dinh Nguyen | 9bbd213 | 2015-06-02 22:52:48 -0500 | [diff] [blame] | 11 | #include <asm/arch/system_manager.h> |
| 12 | #include <asm/io.h> |
| 13 | |
Marek Vasut | d04941c | 2015-07-12 15:59:10 +0200 | [diff] [blame] | 14 | /* |
| 15 | * FIXME: This path is temporary until the SDRAM driver gets |
| 16 | * a proper thorough cleanup. |
| 17 | */ |
| 18 | #include "../../../board/altera/socfpga/qts/sdram_config.h" |
| 19 | |
Dinh Nguyen | 9bbd213 | 2015-06-02 22:52:48 -0500 | [diff] [blame] | 20 | /* define constant for 4G memory - used for SDRAM errata workaround */ |
| 21 | #define MEMSIZE_4G (4ULL * 1024ULL * 1024ULL * 1024ULL) |
| 22 | |
| 23 | DECLARE_GLOBAL_DATA_PTR; |
| 24 | |
Marek Vasut | 42f7ebb | 2015-07-26 10:37:54 +0200 | [diff] [blame] | 25 | struct sdram_prot_rule { |
| 26 | u64 sdram_start; /* SDRAM start address */ |
| 27 | u64 sdram_end; /* SDRAM end address */ |
| 28 | u32 rule; /* SDRAM protection rule number: 0-19 */ |
| 29 | int valid; /* Rule valid or not? 1 - valid, 0 not*/ |
| 30 | |
| 31 | u32 security; |
| 32 | u32 portmask; |
| 33 | u32 result; |
| 34 | u32 lo_prot_id; |
| 35 | u32 hi_prot_id; |
| 36 | }; |
| 37 | |
Dinh Nguyen | 9bbd213 | 2015-06-02 22:52:48 -0500 | [diff] [blame] | 38 | static struct socfpga_system_manager *sysmgr_regs = |
| 39 | (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| 40 | static struct socfpga_sdr_ctrl *sdr_ctrl = |
| 41 | (struct socfpga_sdr_ctrl *)(SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_ADDRESS); |
| 42 | |
| 43 | static int compute_errata_rows(unsigned long long memsize, int cs, int width, |
| 44 | int rows, int banks, int cols) |
| 45 | { |
| 46 | unsigned long long newrows; |
| 47 | int inewrowslog2; |
| 48 | int bits; |
| 49 | |
| 50 | debug("workaround rows - memsize %lld\n", memsize); |
| 51 | debug("workaround rows - cs %d\n", cs); |
| 52 | debug("workaround rows - width %d\n", width); |
| 53 | debug("workaround rows - rows %d\n", rows); |
| 54 | debug("workaround rows - banks %d\n", banks); |
| 55 | debug("workaround rows - cols %d\n", cols); |
| 56 | |
| 57 | newrows = lldiv(memsize, (cs * (width / 8))); |
| 58 | debug("rows workaround - term1 %lld\n", newrows); |
| 59 | |
| 60 | newrows = lldiv(newrows, ((1 << banks) * (1 << cols))); |
| 61 | debug("rows workaround - term2 %lld\n", newrows); |
| 62 | |
| 63 | /* Compute the hamming weight - same as number of bits set. |
| 64 | * Need to see if result is ordinal power of 2 before |
| 65 | * attempting log2 of result. |
| 66 | */ |
| 67 | bits = hweight32(newrows); |
| 68 | |
| 69 | debug("rows workaround - bits %d\n", bits); |
| 70 | |
| 71 | if (bits != 1) { |
| 72 | printf("SDRAM workaround failed, bits set %d\n", bits); |
| 73 | return rows; |
| 74 | } |
| 75 | |
| 76 | if (newrows > UINT_MAX) { |
| 77 | printf("SDRAM workaround rangecheck failed, %lld\n", newrows); |
| 78 | return rows; |
| 79 | } |
| 80 | |
| 81 | inewrowslog2 = __ilog2((unsigned int)newrows); |
| 82 | |
| 83 | debug("rows workaround - ilog2 %d, %d\n", inewrowslog2, |
| 84 | (int)newrows); |
| 85 | |
| 86 | if (inewrowslog2 == -1) { |
| 87 | printf("SDRAM workaround failed, newrows %d\n", (int)newrows); |
| 88 | return rows; |
| 89 | } |
| 90 | |
| 91 | return inewrowslog2; |
| 92 | } |
| 93 | |
| 94 | /* SDRAM protection rules vary from 0-19, a total of 20 rules. */ |
| 95 | static void sdram_set_rule(struct sdram_prot_rule *prule) |
| 96 | { |
| 97 | uint32_t lo_addr_bits; |
| 98 | uint32_t hi_addr_bits; |
| 99 | int ruleno = prule->rule; |
| 100 | |
| 101 | /* Select the rule */ |
| 102 | writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| 103 | |
| 104 | /* Obtain the address bits */ |
| 105 | lo_addr_bits = (uint32_t)(((prule->sdram_start) >> 20ULL) & 0xFFF); |
| 106 | hi_addr_bits = (uint32_t)((((prule->sdram_end-1) >> 20ULL)) & 0xFFF); |
| 107 | |
| 108 | debug("sdram set rule start %x, %lld\n", lo_addr_bits, |
| 109 | prule->sdram_start); |
| 110 | debug("sdram set rule end %x, %lld\n", hi_addr_bits, |
| 111 | prule->sdram_end); |
| 112 | |
| 113 | /* Set rule addresses */ |
| 114 | writel(lo_addr_bits | (hi_addr_bits << 12), &sdr_ctrl->prot_rule_addr); |
| 115 | |
| 116 | /* Set rule protection ids */ |
| 117 | writel(prule->lo_prot_id | (prule->hi_prot_id << 12), |
| 118 | &sdr_ctrl->prot_rule_id); |
| 119 | |
| 120 | /* Set the rule data */ |
| 121 | writel(prule->security | (prule->valid << 2) | |
| 122 | (prule->portmask << 3) | (prule->result << 13), |
| 123 | &sdr_ctrl->prot_rule_data); |
| 124 | |
| 125 | /* write the rule */ |
| 126 | writel(ruleno | (1L << 5), &sdr_ctrl->prot_rule_rdwr); |
| 127 | |
| 128 | /* Set rule number to 0 by default */ |
| 129 | writel(0, &sdr_ctrl->prot_rule_rdwr); |
| 130 | } |
| 131 | |
| 132 | static void sdram_get_rule(struct sdram_prot_rule *prule) |
| 133 | { |
| 134 | uint32_t addr; |
| 135 | uint32_t id; |
| 136 | uint32_t data; |
| 137 | int ruleno = prule->rule; |
| 138 | |
| 139 | /* Read the rule */ |
| 140 | writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| 141 | writel(ruleno | (1L << 6), &sdr_ctrl->prot_rule_rdwr); |
| 142 | |
| 143 | /* Get the addresses */ |
| 144 | addr = readl(&sdr_ctrl->prot_rule_addr); |
| 145 | prule->sdram_start = (addr & 0xFFF) << 20; |
| 146 | prule->sdram_end = ((addr >> 12) & 0xFFF) << 20; |
| 147 | |
| 148 | /* Get the configured protection IDs */ |
| 149 | id = readl(&sdr_ctrl->prot_rule_id); |
| 150 | prule->lo_prot_id = id & 0xFFF; |
| 151 | prule->hi_prot_id = (id >> 12) & 0xFFF; |
| 152 | |
| 153 | /* Get protection data */ |
| 154 | data = readl(&sdr_ctrl->prot_rule_data); |
| 155 | |
| 156 | prule->security = data & 0x3; |
| 157 | prule->valid = (data >> 2) & 0x1; |
| 158 | prule->portmask = (data >> 3) & 0x3FF; |
| 159 | prule->result = (data >> 13) & 0x1; |
| 160 | } |
| 161 | |
| 162 | static void sdram_set_protection_config(uint64_t sdram_start, uint64_t sdram_end) |
| 163 | { |
| 164 | struct sdram_prot_rule rule; |
| 165 | int rules; |
| 166 | |
| 167 | /* Start with accepting all SDRAM transaction */ |
| 168 | writel(0x0, &sdr_ctrl->protport_default); |
| 169 | |
| 170 | /* Clear all protection rules for warm boot case */ |
| 171 | memset(&rule, 0, sizeof(struct sdram_prot_rule)); |
| 172 | |
| 173 | for (rules = 0; rules < 20; rules++) { |
| 174 | rule.rule = rules; |
| 175 | sdram_set_rule(&rule); |
| 176 | } |
| 177 | |
| 178 | /* new rule: accept SDRAM */ |
| 179 | rule.sdram_start = sdram_start; |
| 180 | rule.sdram_end = sdram_end; |
| 181 | rule.lo_prot_id = 0x0; |
| 182 | rule.hi_prot_id = 0xFFF; |
| 183 | rule.portmask = 0x3FF; |
| 184 | rule.security = 0x3; |
| 185 | rule.result = 0; |
| 186 | rule.valid = 1; |
| 187 | rule.rule = 0; |
| 188 | |
| 189 | /* set new rule */ |
| 190 | sdram_set_rule(&rule); |
| 191 | |
| 192 | /* default rule: reject everything */ |
| 193 | writel(0x3ff, &sdr_ctrl->protport_default); |
| 194 | } |
| 195 | |
| 196 | static void sdram_dump_protection_config(void) |
| 197 | { |
| 198 | struct sdram_prot_rule rule; |
| 199 | int rules; |
| 200 | |
| 201 | debug("SDRAM Prot rule, default %x\n", |
| 202 | readl(&sdr_ctrl->protport_default)); |
| 203 | |
| 204 | for (rules = 0; rules < 20; rules++) { |
| 205 | sdram_get_rule(&rule); |
| 206 | debug("Rule %d, rules ...\n", rules); |
| 207 | debug(" sdram start %llx\n", rule.sdram_start); |
| 208 | debug(" sdram end %llx\n", rule.sdram_end); |
| 209 | debug(" low prot id %d, hi prot id %d\n", |
| 210 | rule.lo_prot_id, |
| 211 | rule.hi_prot_id); |
| 212 | debug(" portmask %x\n", rule.portmask); |
| 213 | debug(" security %d\n", rule.security); |
| 214 | debug(" result %d\n", rule.result); |
| 215 | debug(" valid %d\n", rule.valid); |
| 216 | } |
| 217 | } |
| 218 | |
| 219 | /* Function to write to register and verify the write */ |
| 220 | static unsigned sdram_write_verify(unsigned int *addr, unsigned reg_value) |
| 221 | { |
| 222 | #ifndef SDRAM_MMR_SKIP_VERIFY |
| 223 | unsigned reg_value1; |
| 224 | #endif |
| 225 | debug(" Write - Address "); |
| 226 | debug("0x%08x Data 0x%08x\n", (u32)addr, reg_value); |
| 227 | /* Write to register */ |
| 228 | writel(reg_value, addr); |
| 229 | #ifndef SDRAM_MMR_SKIP_VERIFY |
| 230 | debug(" Read and verify..."); |
| 231 | /* Read back the wrote value */ |
| 232 | reg_value1 = readl(addr); |
| 233 | /* Indicate failure if value not matched */ |
| 234 | if (reg_value1 != reg_value) { |
| 235 | debug("FAIL - Address 0x%08x Expected 0x%08x Data 0x%08x\n", |
| 236 | (u32)addr, reg_value, reg_value1); |
| 237 | return 1; |
| 238 | } |
| 239 | debug("correct!\n"); |
| 240 | #endif /* SDRAM_MMR_SKIP_VERIFY */ |
| 241 | return 0; |
| 242 | } |
| 243 | |
| 244 | static void set_sdr_ctrlcfg(void) |
| 245 | { |
| 246 | int addrorder; |
| 247 | |
| 248 | debug("\nConfiguring CTRLCFG\n"); |
| 249 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_MEMTYPE_MASK, |
| 250 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE << |
| 251 | SDR_CTRLGRP_CTRLCFG_MEMTYPE_LSB); |
| 252 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_MEMBL_MASK, |
| 253 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL << |
| 254 | SDR_CTRLGRP_CTRLCFG_MEMBL_LSB); |
| 255 | |
| 256 | |
| 257 | /* SDRAM Failure When Accessing Non-Existent Memory |
| 258 | * Set the addrorder field of the SDRAM control register |
| 259 | * based on the CSBITs setting. |
| 260 | */ |
| 261 | switch (CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS) { |
| 262 | case 1: |
| 263 | addrorder = 0; /* chip, row, bank, column */ |
| 264 | if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER != 0) |
| 265 | debug("INFO: Changing address order to 0 (chip, row, \ |
| 266 | bank, column)\n"); |
| 267 | break; |
| 268 | case 2: |
| 269 | addrorder = 2; /* row, chip, bank, column */ |
| 270 | if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER != 2) |
| 271 | debug("INFO: Changing address order to 2 (row, chip, \ |
| 272 | bank, column)\n"); |
| 273 | break; |
| 274 | default: |
| 275 | addrorder = CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER; |
| 276 | break; |
| 277 | } |
| 278 | |
| 279 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ADDRORDER_MASK, |
| 280 | addrorder << SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB); |
| 281 | |
| 282 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ECCEN_MASK, |
| 283 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN << |
| 284 | SDR_CTRLGRP_CTRLCFG_ECCEN_LSB); |
| 285 | |
| 286 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ECCCORREN_MASK, |
| 287 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN << |
| 288 | SDR_CTRLGRP_CTRLCFG_ECCCORREN_LSB); |
| 289 | |
| 290 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_REORDEREN_MASK, |
| 291 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN << |
| 292 | SDR_CTRLGRP_CTRLCFG_REORDEREN_LSB); |
| 293 | |
| 294 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_STARVELIMIT_MASK, |
| 295 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT << |
| 296 | SDR_CTRLGRP_CTRLCFG_STARVELIMIT_LSB); |
| 297 | |
| 298 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK, |
| 299 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN << |
| 300 | SDR_CTRLGRP_CTRLCFG_DQSTRKEN_LSB); |
| 301 | |
| 302 | clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_NODMPINS_MASK, |
| 303 | CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS << |
| 304 | SDR_CTRLGRP_CTRLCFG_NODMPINS_LSB); |
| 305 | } |
| 306 | |
| 307 | static void set_sdr_dram_timing1(void) |
| 308 | { |
| 309 | debug("Configuring DRAMTIMING1\n"); |
| 310 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TCWL_MASK, |
| 311 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL << |
| 312 | SDR_CTRLGRP_DRAMTIMING1_TCWL_LSB); |
| 313 | |
| 314 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TAL_MASK, |
| 315 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL << |
| 316 | SDR_CTRLGRP_DRAMTIMING1_TAL_LSB); |
| 317 | |
| 318 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TCL_MASK, |
| 319 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL << |
| 320 | SDR_CTRLGRP_DRAMTIMING1_TCL_LSB); |
| 321 | |
| 322 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TRRD_MASK, |
| 323 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD << |
| 324 | SDR_CTRLGRP_DRAMTIMING1_TRRD_LSB); |
| 325 | |
| 326 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TFAW_MASK, |
| 327 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW << |
| 328 | SDR_CTRLGRP_DRAMTIMING1_TFAW_LSB); |
| 329 | |
| 330 | clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TRFC_MASK, |
| 331 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC << |
| 332 | SDR_CTRLGRP_DRAMTIMING1_TRFC_LSB); |
| 333 | } |
| 334 | |
| 335 | static void set_sdr_dram_timing2(void) |
| 336 | { |
| 337 | debug("Configuring DRAMTIMING2\n"); |
| 338 | clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TREFI_MASK, |
| 339 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI << |
| 340 | SDR_CTRLGRP_DRAMTIMING2_TREFI_LSB); |
| 341 | |
| 342 | clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TRCD_MASK, |
| 343 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD << |
| 344 | SDR_CTRLGRP_DRAMTIMING2_TRCD_LSB); |
| 345 | |
| 346 | clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TRP_MASK, |
| 347 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP << |
| 348 | SDR_CTRLGRP_DRAMTIMING2_TRP_LSB); |
| 349 | |
| 350 | clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TWR_MASK, |
| 351 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR << |
| 352 | SDR_CTRLGRP_DRAMTIMING2_TWR_LSB); |
| 353 | |
| 354 | clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TWTR_MASK, |
| 355 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR << |
| 356 | SDR_CTRLGRP_DRAMTIMING2_TWTR_LSB); |
| 357 | } |
| 358 | |
| 359 | static void set_sdr_dram_timing3(void) |
| 360 | { |
| 361 | debug("Configuring DRAMTIMING3\n"); |
| 362 | clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRTP_MASK, |
| 363 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP << |
| 364 | SDR_CTRLGRP_DRAMTIMING3_TRTP_LSB); |
| 365 | |
| 366 | clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRAS_MASK, |
| 367 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS << |
| 368 | SDR_CTRLGRP_DRAMTIMING3_TRAS_LSB); |
| 369 | |
| 370 | clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRC_MASK, |
| 371 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC << |
| 372 | SDR_CTRLGRP_DRAMTIMING3_TRC_LSB); |
| 373 | |
| 374 | clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TMRD_MASK, |
| 375 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD << |
| 376 | SDR_CTRLGRP_DRAMTIMING3_TMRD_LSB); |
| 377 | |
| 378 | clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TCCD_MASK, |
| 379 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD << |
| 380 | SDR_CTRLGRP_DRAMTIMING3_TCCD_LSB); |
| 381 | } |
| 382 | |
| 383 | static void set_sdr_dram_timing4(void) |
| 384 | { |
| 385 | debug("Configuring DRAMTIMING4\n"); |
| 386 | clrsetbits_le32(&sdr_ctrl->dram_timing4, |
| 387 | SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_MASK, |
| 388 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT << |
| 389 | SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_LSB); |
| 390 | |
| 391 | clrsetbits_le32(&sdr_ctrl->dram_timing4, |
| 392 | SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_MASK, |
| 393 | CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT << |
| 394 | SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_LSB); |
| 395 | } |
| 396 | |
| 397 | static void set_sdr_dram_lowpwr_timing(void) |
| 398 | { |
| 399 | debug("Configuring LOWPWRTIMING\n"); |
| 400 | clrsetbits_le32(&sdr_ctrl->lowpwr_timing, |
| 401 | SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_MASK, |
| 402 | CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES << |
| 403 | SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_LSB); |
| 404 | |
| 405 | clrsetbits_le32(&sdr_ctrl->lowpwr_timing, |
| 406 | SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_MASK, |
| 407 | CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES << |
| 408 | SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_LSB); |
| 409 | } |
| 410 | |
| 411 | static void set_sdr_addr_rw(void) |
| 412 | { |
| 413 | int cs = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS; |
| 414 | int width = 8; |
| 415 | int rows = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| 416 | int banks = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS; |
| 417 | int cols = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS; |
| 418 | unsigned long long workaround_memsize = MEMSIZE_4G; |
| 419 | |
| 420 | debug("Configuring DRAMADDRW\n"); |
| 421 | clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK, |
| 422 | CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS << |
| 423 | SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB); |
| 424 | /* |
| 425 | * SDRAM Failure When Accessing Non-Existent Memory |
| 426 | * Update Preloader to artificially increase the number of rows so |
| 427 | * that the memory thinks it has 4GB of RAM. |
| 428 | */ |
| 429 | rows = compute_errata_rows(workaround_memsize, cs, width, rows, banks, |
| 430 | cols); |
| 431 | |
| 432 | clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK, |
| 433 | rows << SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB); |
| 434 | |
| 435 | clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK, |
| 436 | CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS << |
| 437 | SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB); |
| 438 | /* SDRAM Failure When Accessing Non-Existent Memory |
| 439 | * Set SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB to |
| 440 | * log2(number of chip select bits). Since there's only |
| 441 | * 1 or 2 chip selects, log2(1) => 0, and log2(2) => 1, |
| 442 | * which is the same as "chip selects" - 1. |
| 443 | */ |
| 444 | clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK, |
| 445 | (CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS - 1) << |
| 446 | SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB); |
| 447 | } |
| 448 | |
| 449 | static void set_sdr_static_cfg(void) |
| 450 | { |
| 451 | debug("Configuring STATICCFG\n"); |
| 452 | clrsetbits_le32(&sdr_ctrl->static_cfg, SDR_CTRLGRP_STATICCFG_MEMBL_MASK, |
| 453 | CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL << |
| 454 | SDR_CTRLGRP_STATICCFG_MEMBL_LSB); |
| 455 | |
| 456 | clrsetbits_le32(&sdr_ctrl->static_cfg, |
| 457 | SDR_CTRLGRP_STATICCFG_USEECCASDATA_MASK, |
| 458 | CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA << |
| 459 | SDR_CTRLGRP_STATICCFG_USEECCASDATA_LSB); |
| 460 | } |
| 461 | |
| 462 | static void set_sdr_fifo_cfg(void) |
| 463 | { |
| 464 | debug("Configuring FIFOCFG\n"); |
| 465 | clrsetbits_le32(&sdr_ctrl->fifo_cfg, SDR_CTRLGRP_FIFOCFG_SYNCMODE_MASK, |
| 466 | CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE << |
| 467 | SDR_CTRLGRP_FIFOCFG_SYNCMODE_LSB); |
| 468 | |
| 469 | clrsetbits_le32(&sdr_ctrl->fifo_cfg, SDR_CTRLGRP_FIFOCFG_INCSYNC_MASK, |
| 470 | CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC << |
| 471 | SDR_CTRLGRP_FIFOCFG_INCSYNC_LSB); |
| 472 | } |
| 473 | |
| 474 | static void set_sdr_mp_weight(void) |
| 475 | { |
| 476 | debug("Configuring MPWEIGHT_MPWEIGHT_0\n"); |
| 477 | clrsetbits_le32(&sdr_ctrl->mp_weight0, |
| 478 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_MASK, |
| 479 | CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 << |
| 480 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_LSB); |
| 481 | |
| 482 | clrsetbits_le32(&sdr_ctrl->mp_weight1, |
| 483 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_MASK, |
| 484 | CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 << |
| 485 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_LSB); |
| 486 | |
| 487 | clrsetbits_le32(&sdr_ctrl->mp_weight1, |
| 488 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_MASK, |
| 489 | CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 << |
| 490 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_LSB); |
| 491 | |
| 492 | clrsetbits_le32(&sdr_ctrl->mp_weight2, |
| 493 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_MASK, |
| 494 | CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 << |
| 495 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_LSB); |
| 496 | |
| 497 | clrsetbits_le32(&sdr_ctrl->mp_weight3, |
| 498 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_MASK, |
| 499 | CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 << |
| 500 | SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_LSB); |
| 501 | } |
| 502 | |
| 503 | static void set_sdr_mp_pacing(void) |
| 504 | { |
| 505 | debug("Configuring MPPACING_MPPACING_0\n"); |
| 506 | clrsetbits_le32(&sdr_ctrl->mp_pacing0, |
| 507 | SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_MASK, |
| 508 | CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 << |
| 509 | SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_LSB); |
| 510 | |
| 511 | clrsetbits_le32(&sdr_ctrl->mp_pacing1, |
| 512 | SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_MASK, |
| 513 | CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 << |
| 514 | SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_LSB); |
| 515 | |
| 516 | clrsetbits_le32(&sdr_ctrl->mp_pacing1, |
| 517 | SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_MASK, |
| 518 | CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 << |
| 519 | SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_LSB); |
| 520 | |
| 521 | clrsetbits_le32(&sdr_ctrl->mp_pacing2, |
| 522 | SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_MASK, |
| 523 | CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 << |
| 524 | SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_LSB); |
| 525 | |
| 526 | clrsetbits_le32(&sdr_ctrl->mp_pacing3, |
| 527 | SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_MASK, |
| 528 | CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 << |
| 529 | SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_LSB); |
| 530 | } |
| 531 | |
| 532 | static void set_sdr_mp_threshold(void) |
| 533 | { |
| 534 | debug("Configuring MPTHRESHOLDRST_MPTHRESHOLDRST_0\n"); |
| 535 | clrsetbits_le32(&sdr_ctrl->mp_threshold0, |
| 536 | SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_MASK, |
| 537 | CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 << |
| 538 | SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_LSB); |
| 539 | |
| 540 | clrsetbits_le32(&sdr_ctrl->mp_threshold1, |
| 541 | SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_MASK, |
Marek Vasut | 452a81e | 2015-07-09 01:47:56 +0200 | [diff] [blame] | 542 | CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 << |
Dinh Nguyen | 9bbd213 | 2015-06-02 22:52:48 -0500 | [diff] [blame] | 543 | SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_LSB); |
| 544 | |
| 545 | clrsetbits_le32(&sdr_ctrl->mp_threshold2, |
| 546 | SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_MASK, |
| 547 | CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 << |
| 548 | SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_LSB); |
| 549 | } |
| 550 | |
| 551 | |
| 552 | /* Function to initialize SDRAM MMR */ |
| 553 | unsigned sdram_mmr_init_full(unsigned int sdr_phy_reg) |
| 554 | { |
| 555 | unsigned long reg_value; |
| 556 | unsigned long status = 0; |
| 557 | |
| 558 | #if defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS) && \ |
| 559 | defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS) && \ |
| 560 | defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS) && \ |
| 561 | defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS) && \ |
| 562 | defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS) |
| 563 | |
| 564 | writel(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS, |
| 565 | &sysmgr_regs->iswgrp_handoff[4]); |
| 566 | #endif |
| 567 | set_sdr_ctrlcfg(); |
| 568 | set_sdr_dram_timing1(); |
| 569 | set_sdr_dram_timing2(); |
| 570 | set_sdr_dram_timing3(); |
| 571 | set_sdr_dram_timing4(); |
| 572 | set_sdr_dram_lowpwr_timing(); |
| 573 | set_sdr_addr_rw(); |
| 574 | |
| 575 | debug("Configuring DRAMIFWIDTH\n"); |
| 576 | clrsetbits_le32(&sdr_ctrl->dram_if_width, |
| 577 | SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_MASK, |
| 578 | CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH << |
| 579 | SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_LSB); |
| 580 | |
| 581 | debug("Configuring DRAMDEVWIDTH\n"); |
| 582 | clrsetbits_le32(&sdr_ctrl->dram_dev_width, |
| 583 | SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_MASK, |
| 584 | CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH << |
| 585 | SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_LSB); |
| 586 | |
| 587 | debug("Configuring LOWPWREQ\n"); |
| 588 | clrsetbits_le32(&sdr_ctrl->lowpwr_eq, |
| 589 | SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_MASK, |
| 590 | CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK << |
| 591 | SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_LSB); |
| 592 | |
| 593 | debug("Configuring DRAMINTR\n"); |
| 594 | clrsetbits_le32(&sdr_ctrl->dram_intr, SDR_CTRLGRP_DRAMINTR_INTREN_MASK, |
| 595 | CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN << |
| 596 | SDR_CTRLGRP_DRAMINTR_INTREN_LSB); |
| 597 | |
| 598 | set_sdr_static_cfg(); |
| 599 | |
| 600 | debug("Configuring CTRLWIDTH\n"); |
| 601 | clrsetbits_le32(&sdr_ctrl->ctrl_width, |
| 602 | SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_MASK, |
| 603 | CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH << |
| 604 | SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_LSB); |
| 605 | |
| 606 | debug("Configuring PORTCFG\n"); |
| 607 | clrsetbits_le32(&sdr_ctrl->port_cfg, SDR_CTRLGRP_PORTCFG_AUTOPCHEN_MASK, |
| 608 | CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN << |
| 609 | SDR_CTRLGRP_PORTCFG_AUTOPCHEN_LSB); |
| 610 | |
| 611 | set_sdr_fifo_cfg(); |
| 612 | |
| 613 | debug("Configuring MPPRIORITY\n"); |
| 614 | clrsetbits_le32(&sdr_ctrl->mp_priority, |
| 615 | SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_MASK, |
| 616 | CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY << |
| 617 | SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_LSB); |
| 618 | |
| 619 | set_sdr_mp_weight(); |
| 620 | set_sdr_mp_pacing(); |
| 621 | set_sdr_mp_threshold(); |
| 622 | |
| 623 | debug("Configuring PHYCTRL_PHYCTRL_0\n"); |
| 624 | setbits_le32(&sdr_ctrl->phy_ctrl0, |
| 625 | CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0); |
| 626 | |
| 627 | debug("Configuring CPORTWIDTH\n"); |
| 628 | clrsetbits_le32(&sdr_ctrl->cport_width, |
| 629 | SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_MASK, |
| 630 | CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH << |
| 631 | SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_LSB); |
| 632 | debug(" Write - Address "); |
| 633 | debug("0x%08x Data 0x%08x\n", |
| 634 | (unsigned)(&sdr_ctrl->cport_width), |
| 635 | (unsigned)reg_value); |
| 636 | reg_value = readl(&sdr_ctrl->cport_width); |
| 637 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 638 | |
| 639 | debug("Configuring CPORTWMAP\n"); |
| 640 | clrsetbits_le32(&sdr_ctrl->cport_wmap, |
| 641 | SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_MASK, |
| 642 | CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP << |
| 643 | SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_LSB); |
| 644 | debug(" Write - Address "); |
| 645 | debug("0x%08x Data 0x%08x\n", |
| 646 | (unsigned)(&sdr_ctrl->cport_wmap), |
| 647 | (unsigned)reg_value); |
| 648 | reg_value = readl(&sdr_ctrl->cport_wmap); |
| 649 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 650 | |
| 651 | debug("Configuring CPORTRMAP\n"); |
| 652 | clrsetbits_le32(&sdr_ctrl->cport_rmap, |
| 653 | SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_MASK, |
| 654 | CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP << |
| 655 | SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_LSB); |
| 656 | debug(" Write - Address "); |
| 657 | debug("0x%08x Data 0x%08x\n", |
| 658 | (unsigned)(&sdr_ctrl->cport_rmap), |
| 659 | (unsigned)reg_value); |
| 660 | reg_value = readl(&sdr_ctrl->cport_rmap); |
| 661 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 662 | |
| 663 | debug("Configuring RFIFOCMAP\n"); |
| 664 | clrsetbits_le32(&sdr_ctrl->rfifo_cmap, |
| 665 | SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_MASK, |
| 666 | CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP << |
| 667 | SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_LSB); |
| 668 | debug(" Write - Address "); |
| 669 | debug("0x%08x Data 0x%08x\n", |
| 670 | (unsigned)(&sdr_ctrl->rfifo_cmap), |
| 671 | (unsigned)reg_value); |
| 672 | reg_value = readl(&sdr_ctrl->rfifo_cmap); |
| 673 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 674 | |
| 675 | debug("Configuring WFIFOCMAP\n"); |
| 676 | reg_value = readl(&sdr_ctrl->wfifo_cmap); |
| 677 | clrsetbits_le32(&sdr_ctrl->wfifo_cmap, |
| 678 | SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_MASK, |
| 679 | CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP << |
| 680 | SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_LSB); |
| 681 | debug(" Write - Address "); |
| 682 | debug("0x%08x Data 0x%08x\n", |
| 683 | (unsigned)(&sdr_ctrl->wfifo_cmap), |
| 684 | (unsigned)reg_value); |
| 685 | reg_value = readl(&sdr_ctrl->wfifo_cmap); |
| 686 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 687 | |
| 688 | debug("Configuring CPORTRDWR\n"); |
| 689 | clrsetbits_le32(&sdr_ctrl->cport_rdwr, |
| 690 | SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_MASK, |
| 691 | CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR << |
| 692 | SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_LSB); |
| 693 | debug(" Write - Address "); |
| 694 | debug("0x%08x Data 0x%08x\n", |
| 695 | (unsigned)(&sdr_ctrl->cport_rdwr), |
| 696 | (unsigned)reg_value); |
| 697 | reg_value = readl(&sdr_ctrl->cport_rdwr); |
| 698 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 699 | |
| 700 | debug("Configuring DRAMODT\n"); |
| 701 | clrsetbits_le32(&sdr_ctrl->dram_odt, |
| 702 | SDR_CTRLGRP_DRAMODT_READ_MASK, |
| 703 | CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ << |
| 704 | SDR_CTRLGRP_DRAMODT_READ_LSB); |
| 705 | |
| 706 | clrsetbits_le32(&sdr_ctrl->dram_odt, |
| 707 | SDR_CTRLGRP_DRAMODT_WRITE_MASK, |
| 708 | CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE << |
| 709 | SDR_CTRLGRP_DRAMODT_WRITE_LSB); |
| 710 | |
| 711 | /* saving this value to SYSMGR.ISWGRP.HANDOFF.FPGA2SDR */ |
| 712 | writel(CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST, |
| 713 | &sysmgr_regs->iswgrp_handoff[3]); |
| 714 | |
| 715 | /* only enable if the FPGA is programmed */ |
| 716 | if (fpgamgr_test_fpga_ready()) { |
| 717 | if (sdram_write_verify(&sdr_ctrl->fpgaport_rst, |
| 718 | CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST) == 1) { |
| 719 | status = 1; |
| 720 | return 1; |
| 721 | } |
| 722 | } |
| 723 | |
| 724 | /* Restore the SDR PHY Register if valid */ |
| 725 | if (sdr_phy_reg != 0xffffffff) |
| 726 | writel(sdr_phy_reg, &sdr_ctrl->phy_ctrl0); |
| 727 | |
| 728 | /***** Final step - apply configuration changes *****/ |
| 729 | debug("Configuring STATICCFG_\n"); |
| 730 | clrsetbits_le32(&sdr_ctrl->static_cfg, SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK, |
| 731 | 1 << SDR_CTRLGRP_STATICCFG_APPLYCFG_LSB); |
| 732 | debug(" Write - Address "); |
| 733 | debug("0x%08x Data 0x%08x\n", |
| 734 | (unsigned)(&sdr_ctrl->static_cfg), |
| 735 | (unsigned)reg_value); |
| 736 | reg_value = readl(&sdr_ctrl->static_cfg); |
| 737 | debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| 738 | |
| 739 | sdram_set_protection_config(0, sdram_calculate_size()); |
| 740 | |
| 741 | sdram_dump_protection_config(); |
| 742 | |
| 743 | return status; |
| 744 | } |
| 745 | |
| 746 | /* |
| 747 | * To calculate SDRAM device size based on SDRAM controller parameters. |
| 748 | * Size is specified in bytes. |
| 749 | * |
| 750 | * NOTE: |
| 751 | * This function is compiled and linked into the preloader and |
| 752 | * Uboot (there may be others). So if this function changes, the Preloader |
| 753 | * and UBoot must be updated simultaneously. |
| 754 | */ |
| 755 | unsigned long sdram_calculate_size(void) |
| 756 | { |
| 757 | unsigned long temp; |
| 758 | unsigned long row, bank, col, cs, width; |
| 759 | |
| 760 | temp = readl(&sdr_ctrl->dram_addrw); |
| 761 | col = (temp & SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK) >> |
| 762 | SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB; |
| 763 | |
| 764 | /* SDRAM Failure When Accessing Non-Existent Memory |
| 765 | * Use ROWBITS from Quartus/QSys to calculate SDRAM size |
| 766 | * since the FB specifies we modify ROWBITs to work around SDRAM |
| 767 | * controller issue. |
| 768 | * |
| 769 | * If the stored handoff value for rows is 0, it probably means |
| 770 | * the preloader is older than UBoot. Use the |
| 771 | * #define from the SOCEDS Tools per Crucible review |
| 772 | * uboot-socfpga-204. Note that this is not a supported |
| 773 | * configuration and is not tested. The customer |
| 774 | * should be using preloader and uboot built from the |
| 775 | * same tag. |
| 776 | */ |
| 777 | row = readl(&sysmgr_regs->iswgrp_handoff[4]); |
| 778 | if (row == 0) |
| 779 | row = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| 780 | /* If the stored handoff value for rows is greater than |
| 781 | * the field width in the sdr.dramaddrw register then |
| 782 | * something is very wrong. Revert to using the the #define |
| 783 | * value handed off by the SOCEDS tool chain instead of |
| 784 | * using a broken value. |
| 785 | */ |
| 786 | if (row > 31) |
| 787 | row = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| 788 | |
| 789 | bank = (temp & SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK) >> |
| 790 | SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB; |
| 791 | |
| 792 | /* SDRAM Failure When Accessing Non-Existent Memory |
| 793 | * Use CSBITs from Quartus/QSys to calculate SDRAM size |
| 794 | * since the FB specifies we modify CSBITs to work around SDRAM |
| 795 | * controller issue. |
| 796 | */ |
| 797 | cs = (temp & SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK) >> |
| 798 | SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB; |
| 799 | cs += 1; |
| 800 | |
| 801 | cs = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS; |
| 802 | |
| 803 | width = readl(&sdr_ctrl->dram_if_width); |
| 804 | /* ECC would not be calculated as its not addressible */ |
| 805 | if (width == SDRAM_WIDTH_32BIT_WITH_ECC) |
| 806 | width = 32; |
| 807 | if (width == SDRAM_WIDTH_16BIT_WITH_ECC) |
| 808 | width = 16; |
| 809 | |
| 810 | /* calculate the SDRAM size base on this info */ |
| 811 | temp = 1 << (row + bank + col); |
| 812 | temp = temp * cs * (width / 8); |
| 813 | |
| 814 | debug("sdram_calculate_memory returns %ld\n", temp); |
| 815 | |
| 816 | return temp; |
| 817 | } |