blob: da1c173a431b21858539cac55e22b23539081175 [file] [log] [blame]
wdenkc12b5a32002-08-20 16:13:03 +00001/*
2 * (C) Copyright 2001
3 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
4 *
5 * (C) Copyright 2001
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/*
28 * board/config.h - configuration options, board specific
29 */
30
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/*
35 * High Level Configuration Options
36 * (easy to change)
37 */
38
39#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
40#define CONFIG_NX823 1 /* ...on a NEXUS 823 module */
41
42/*#define CONFIG_VIDEO 1 */
43
44#define CONFIG_8xx_GCLK_FREQ MPC8XX_SPEED
45#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
46#undef CONFIG_8xx_CONS_SMC2
47#undef CONFIG_8xx_CONS_NONE
48#define CONFIG_BAUDRATE 57600 /* console baudrate = 115kbps */
49#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
Detlev Zundele5084af2008-02-22 17:21:32 +010050#define CONFIG_BOOTARGS "ramdisk_size=8000 "\
wdenkc12b5a32002-08-20 16:13:03 +000051 "root=/dev/nfs rw nfsroot=10.77.77.250:/ppcroot "\
52 "nfsaddrs=10.77.77.20:10.77.77.250"
53#define CONFIG_BOOTCOMMAND "bootm 400e0000"
54
55#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
56#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
57#undef CONFIG_WATCHDOG /* watchdog disabled, for now */
wdenkc12b5a32002-08-20 16:13:03 +000058#define CONFIG_AUTOSCRIPT
59
Jon Loeliger7be044e2007-07-09 21:24:19 -050060/*
61 * BOOTP options
62 */
63#define CONFIG_BOOTP_SUBNETMASK
64#define CONFIG_BOOTP_GATEWAY
65#define CONFIG_BOOTP_HOSTNAME
66#define CONFIG_BOOTP_BOOTPATH
67#define CONFIG_BOOTP_BOOTFILESIZE
68
Jon Loeligere18a1062007-07-08 14:21:43 -050069
70/*
71 * Command line configuration.
72 */
73#include <config_cmd_default.h>
74
75#define CONFIG_CMD_AUTOSCRIPT
76
77
wdenkc12b5a32002-08-20 16:13:03 +000078/* call various generic functions */
79#define CONFIG_MISC_INIT_R
80
wdenkc12b5a32002-08-20 16:13:03 +000081/*
82 * Miscellaneous configurable options
83 */
84#define CFG_LONGHELP /* undef to save memory */
85#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeligere18a1062007-07-08 14:21:43 -050086#if defined(CONFIG_CMD_KGDB)
wdenkc12b5a32002-08-20 16:13:03 +000087#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
88#else
89#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
90#endif
91#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
92#define CFG_MAXARGS 16 /* max number of command args */
93#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
94
95#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
96#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
97
98#define CFG_LOAD_ADDR 0x100000 /* default load address */
99
100#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
101
102#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
103
104/*
105 * Low Level Configuration Settings
106 * (address mappings, register initial values, etc.)
107 * You should know what you are doing if you make changes here.
108 */
109/*-----------------------------------------------------------------------
110 * Internal Memory Mapped Register
111 */
112#define CFG_IMMR 0xFFF00000
113
114/*-----------------------------------------------------------------------
115 * Definitions for initial stack pointer and data area (in DPRAM)
116 */
117#define CFG_INIT_RAM_ADDR CFG_IMMR
118#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
119#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
120#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
121#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
122
123/*-----------------------------------------------------------------------
124 * Start addresses for the final memory configuration
125 * (Set up by the startup code)
126 * Please note that CFG_SDRAM_BASE _must_ start at 0
127 */
128#define CFG_SDRAM_BASE 0x00000000
129#define CFG_FLASH_BASE 0x40000000
130#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
131#define CFG_MONITOR_BASE CFG_FLASH_BASE
132#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
133
134/*
135 * For booting Linux, the board info and command line data
136 * have to be in the first 8 MB of memory, since this is
137 * the maximum mapped by the Linux kernel during initialization.
138 */
139#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
140
141/*-----------------------------------------------------------------------
142 * FLASH organization
143 */
144#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
145#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
146
147#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
148#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
149
150#define CFG_ENV_IS_IN_FLASH 1
151#define xEMBED
152#ifdef EMBED
153#define CFG_ENV_SIZE 0x200 /* FIXME How big when embedded?? */
154#define CFG_ENV_ADDR CFG_MONITOR_BASE
155#else
156#define CFG_ENV_ADDR 0x40020000 /* absolute address for now */
157#define CFG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */
158#endif
159
160#define CFG_FLASH_SN_BASE 0x4001fff0 /* programmer automagically puts */
161#define CFG_FLASH_SN_SECTOR 0x40000000 /* a serial number here */
162#define CFG_FLASH_SN_BYTES 8
163
164/*-----------------------------------------------------------------------
165 * Cache Configuration
166 */
167#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligere18a1062007-07-08 14:21:43 -0500168#if defined(CONFIG_CMD_KGDB)
wdenkc12b5a32002-08-20 16:13:03 +0000169#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
170#endif
171
172/*-----------------------------------------------------------------------
173 * SYPCR - System Protection Control 11-9
174 * SYPCR can only be written once after reset!
175 *-----------------------------------------------------------------------
176 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
177 */
178#if defined(CONFIG_WATCHDOG)
179#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
180 SYPCR_SWE | SYPCR_SWP)
181#else
182#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
183#endif
184
185/*-----------------------------------------------------------------------
186 * SIUMCR - SIU Module Configuration 12-30
187 *-----------------------------------------------------------------------
188 * PCMCIA config., multi-function pin tri-state
189 */
190#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00)
191
192/*-----------------------------------------------------------------------
193 * TBSCR - Time Base Status and Control 12-16
194 *-----------------------------------------------------------------------
195 * Clear Reference Interrupt Status, Timebase freezing enabled
196 */
197#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
198
199/*-----------------------------------------------------------------------
200 * RTCSC - Real-Time Clock Status and Control Register 12-18
201 *-----------------------------------------------------------------------
202 */
203#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
204
205/*-----------------------------------------------------------------------
206 * PISCR - Periodic Interrupt Status and Control 12-23
207 *-----------------------------------------------------------------------
208 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
209 */
210#define CFG_PISCR (PISCR_PS | PISCR_PITF)
211
212/*-----------------------------------------------------------------------
213 * PLPRCR - PLL, Low-Power, and Reset Control Register 5-7
214 *-----------------------------------------------------------------------
215 * Reset PLL lock status sticky bit, timer expired status bit and timer
216 * interrupt status bit
217 */
218#define MPC8XX_SPEED 66666666L
219#define MPC8XX_XIN 32768 /* 32.768 kHz crystal */
220#define MPC8XX_FACT (MPC8XX_SPEED/MPC8XX_XIN)
221#define CFG_PLPRCR_MF ((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT)
222#define CFG_PLPRCR (CFG_PLPRCR_MF | PLPRCR_TEXPS | PLPRCR_TMIST)
223
224/*-----------------------------------------------------------------------
225 * SCCR - System Clock and reset Control Register 5-3
226 *-----------------------------------------------------------------------
227 * Set clock output, timebase and RTC source and divider,
228 * power management and some other internal clocks
229 */
230#define SCCR_MASK SCCR_EBDF11
231#define CFG_SCCR (SCCR_TBS | \
232 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
233 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
234 SCCR_DFALCD00)
235
236/*-----------------------------------------------------------------------
237 *
238 *-----------------------------------------------------------------------
239 *
240 */
241#define CFG_DER 0
242
243/*
244 * Init Memory Controller:
245 *
246 * BR0 and OR0 (FLASH)
247 */
248
249#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
250
251/* used to re-map FLASH both when starting from SRAM or FLASH:
252 * restrict access enough to keep SRAM working (if any)
253 * but not too much to meddle with FLASH accesses
254 */
255#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
256#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
257
258/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0 */
259#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
260 OR_SCY_8_CLK )
261
262#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
263#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
264#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
265
266/*
267 * BR1/2 and OR1/2 (SDRAM)
268 */
269#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
270#define SDRAM_BASE2_PRELIM 0x20000000 /* SDRAM bank #1 */
271#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
272
273/* SDRAM timing: Multiplexed addresses, drive GPL5 high on first cycle */
274#define CFG_OR_TIMING_SDRAM (OR_G5LS | OR_CSNT_SAM)
275
276#define CFG_OR1_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
277#define CFG_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
278#define CFG_OR2_PRELIM CFG_OR1_PRELIM
279#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
280
281/* IO and memory mapped stuff */
282#define NX823_IO_OR_AM 0xFFFF0000 /* mask for IO addresses */
283#define NX823_IO_BASE 0xFF000000 /* start of IO */
284#define GPOUT_OFFSET (3<<16)
285#define QUART_OFFSET (4<<16)
286#define VIDAC_OFFSET (5<<16)
287#define CPLD_OFFSET (6<<16)
288#define SED1386_OFFSET (7<<16)
289
290/*
291 * BR3 and OR3 (general purpose output latches)
292 */
293#define GPOUT_BASE (NX823_IO_BASE + GPOUT_OFFSET)
294#define GPOUT_TIMING (OR_CSNT_SAM | OR_TRLX | OR_BI)
295#define CFG_OR3_PRELIM (NX823_IO_OR_AM | GPOUT_TIMING)
296#define CFG_BR3_PRELIM (GPOUT_BASE | BR_V)
297
298/*
299 * BR4 and OR4 (QUART)
300 */
301#define QUART_BASE (NX823_IO_BASE + QUART_OFFSET)
302#define QUART_TIMING (OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_TRLX)
303#define CFG_OR4_PRELIM (NX823_IO_OR_AM | QUART_TIMING | OR_BI)
304#define CFG_BR4_PRELIM (QUART_BASE | BR_PS_8 | BR_V)
305
306/*
307 * BR5 and OR5 (Video DAC)
308 */
309#define VIDAC_BASE (NX823_IO_BASE + VIDAC_OFFSET)
310#define VIDAC_TIMING (OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_EHTR)
311#define CFG_OR5_PRELIM (NX823_IO_OR_AM | VIDAC_TIMING | OR_BI)
312#define CFG_BR5_PRELIM (VIDAC_BASE | BR_PS_8 | BR_V)
313
314/*
315 * BR6 and OR6 (CPLD)
316 * FIXME timing not verified for CPLD
317 */
318#define CPLD_BASE (NX823_IO_BASE + CPLD_OFFSET)
319#define CPLD_TIMING (OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_EHTR)
320#define CFG_OR6_PRELIM (NX823_IO_OR_AM | CPLD_TIMING | OR_BI)
321#define CFG_BR6_PRELIM (CPLD_BASE | BR_PS_8 | BR_V )
322
323/*
324 * BR7 and OR7 (SED1386)
325 * FIXME timing not verified for SED controller
326 */
327#define SED1386_BASE 0xF7000000
328#define CFG_OR7_PRELIM (0xFF000000 | OR_BI | OR_SETA)
329#define CFG_BR7_PRELIM (SED1386_BASE | BR_PS_16 | BR_V )
330
331/*
332 * Memory Periodic Timer Prescaler
333 */
334
335/* periodic timer for refresh */
336#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
337
338/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
339#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
340#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
341
342/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
343#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
344#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
345
346/*
347 * MAMR settings for SDRAM
348 */
349
350/* 8 column SDRAM */
351#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
352 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
353 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
354/* 9 column SDRAM */
355#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
356 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
357 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
358
359
360/*
361 * Internal Definitions
362 *
363 * Boot Flags
364 */
365#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
366#define BOOTFLAG_WARM 0x02 /* Software reboot */
367
368#define CONFIG_ENV_OVERWRITE /* allow changes to ethaddr (for now) */
369#define CONFIG_ETHADDR 00:10:20:30:40:50
370#define CONFIG_IPADDR 10.77.77.20
371#define CONFIG_SERVERIP 10.77.77.250
372
373#endif /* __CONFIG_H */