blob: 7661000b45da9db9666b3be1c1406fb0937084d8 [file] [log] [blame]
Stefan Agner31b1e172018-05-30 19:01:48 +02001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2018 Toradex AG
4 *
5 * Configuration settings for the Colibri iMX6ULL module.
6 *
7 * based on colibri_imx7.h
8 */
9
10#ifndef __COLIBRI_IMX6ULL_CONFIG_H
11#define __COLIBRI_IMX6ULL_CONFIG_H
12
13#include "mx6_common.h"
14#define CONFIG_IOMUX_LPSR
15
16/* #define CONFIG_DBG_MONITOR*/
17#define PHYS_SDRAM_SIZE SZ_512M
18
19/* Size of malloc() pool */
20#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
21
22/* Network */
23#define CONFIG_MII
24#define CONFIG_FEC_XCV_TYPE RMII
25#define CONFIG_ETHPRIME "FEC"
26#define CONFIG_FEC_MXC_PHYADDR 0
27
28#define CONFIG_IP_DEFRAG
29#define CONFIG_TFTP_BLOCKSIZE 16352
30#define CONFIG_TFTP_TSIZE
31
32/* ENET1 */
33#define IMX_FEC_BASE ENET2_BASE_ADDR
34
35/* MMC Config*/
36#define CONFIG_SYS_FSL_ESDHC_ADDR 0
37#define CONFIG_SYS_FSL_USDHC_NUM 1
38
39#undef CONFIG_BOOTM_PLAN9
40#undef CONFIG_BOOTM_RTEMS
41
42/* I2C configs */
43#define CONFIG_SYS_I2C_SPEED 100000
44
45#define CONFIG_IPADDR 192.168.10.2
46#define CONFIG_NETMASK 255.255.255.0
47#define CONFIG_SERVERIP 192.168.10.1
48
49#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
50
51#define MEM_LAYOUT_ENV_SETTINGS \
52 "bootm_size=0x10000000\0" \
53 "fdt_addr_r=0x82000000\0" \
54 "fdt_high=0xffffffff\0" \
55 "initrd_high=0xffffffff\0" \
56 "kernel_addr_r=0x81000000\0" \
57 "pxefile_addr_r=0x87100000\0" \
58 "ramdisk_addr_r=0x82100000\0" \
59 "scriptaddr=0x87000000\0"
60
61#define NFS_BOOTCMD \
62 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
63 "nfsboot=run setup; " \
64 "setenv bootargs ${defargs} ${nfsargs} " \
65 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
66 "dhcp ${kernel_addr_r} && " \
67 "tftp ${fdt_addr_r} " FDT_FILE " && " \
68 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
69
70#define SD_BOOTCMD \
71 "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
72 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
73 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
74 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
75 "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
76 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
77
78#define UBI_BOOTCMD \
79 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
80 "ubi.fm_autoconvert=1\0" \
81 "ubiboot=run setup; " \
82 "setenv bootargs ${defargs} ${ubiargs} " \
83 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
84 "ubi part ubi &&" \
85 "ubi read ${kernel_addr_r} kernel && " \
86 "ubi read ${fdt_addr_r} dtb && " \
87 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
88
89#define CONFIG_BOOTCOMMAND "run ubiboot; " \
90 "setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
91
92#define BOOT_TARGET_DEVICES(func) \
93 func(MMC, mmc, 0) \
94 func(USB, usb, 0) \
95 func(DHCP, dhcp, na)
96#include <config_distro_bootcmd.h>
97
98#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
99
100#define CONFIG_EXTRA_ENV_SETTINGS \
101 BOOTENV \
102 MEM_LAYOUT_ENV_SETTINGS \
103 NFS_BOOTCMD \
104 SD_BOOTCMD \
105 UBI_BOOTCMD \
106 "console=ttymxc0\0" \
107 "defargs=user_debug=30\0" \
108 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
109 "fdt_board=eval-v3\0" \
110 "fdt_fixup=;\0" \
111 "ip_dyn=yes\0" \
112 "kernel_file=zImage\0" \
113 "mtdparts=" MTDPARTS_DEFAULT "\0" \
114 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
115 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
116 "${board}/flash_eth.img && source ${loadaddr}\0" \
117 "setsdupdate=mmc rescan && setenv interface mmc && " \
118 "fatload ${interface} 0:1 ${loadaddr} " \
119 "${board}/flash_blk.img && source ${loadaddr}\0" \
120 "setup=setenv setupargs " \
121 "console=tty1 console=${console}" \
122 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
123 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
124 "setusbupdate=usb start && setenv interface usb && " \
125 "fatload ${interface} 0:1 ${loadaddr} " \
126 "${board}/flash_blk.img && source ${loadaddr}\0" \
127 "splashpos=m,m\0" \
128 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
129 "vidargs=video=mxsfb:640x480-16@60"
130
131#define CONFIG_SYS_MEMTEST_START 0x80000000
132#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000)
133
134#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
135
136/* Physical Memory Map */
137#define CONFIG_NR_DRAM_BANKS 1
138#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
139
140#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
141#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
142#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
143
144#define CONFIG_SYS_INIT_SP_OFFSET \
145 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
146#define CONFIG_SYS_INIT_SP_ADDR \
147 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
148
149#if defined(CONFIG_ENV_IS_IN_NAND)
150#define CONFIG_ENV_SECT_SIZE (128 * 1024)
151#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
152#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
153#endif
154
155/* NAND stuff */
156#define CONFIG_SYS_MAX_NAND_DEVICE 1
157/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
158#define CONFIG_SYS_NAND_BASE -1
159#define CONFIG_SYS_NAND_ONFI_DETECTION
160#define CONFIG_SYS_NAND_USE_FLASH_BBT
161
162/* Dynamic MTD partition support */
163#define CONFIG_MTD_PARTITIONS
164#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
165#define MTDIDS_DEFAULT "nand0=gpmi-nand"
166#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
167 "512k(mx6ull-bcb)," \
168 "1536k(u-boot1)ro," \
169 "1536k(u-boot2)ro," \
170 "512k(u-boot-env)," \
171 "-(ubi)"
172
173/* USB Configs */
174#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
175
176#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
177#define CONFIG_MXC_USB_FLAGS 0
178#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
179
180#define CONFIG_IMX_THERMAL
181
182#define CONFIG_USBD_HS
183
184/* USB Device Firmware Update support */
185#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
186#define DFU_DEFAULT_POLL_TIMEOUT 300
187
188#ifdef CONFIG_VIDEO
189#define CONFIG_VIDEO_MXS
190#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
191#define CONFIG_VIDEO_LOGO
192#define CONFIG_SPLASH_SCREEN
193#define CONFIG_SPLASH_SCREEN_ALIGN
194#define CONFIG_BMP_16BPP
195#define CONFIG_VIDEO_BMP_RLE8
196#define CONFIG_VIDEO_BMP_LOGO
197#endif
198
199#endif