blob: d087a313892603fbc3a7868807a2fd86982aba70 [file] [log] [blame]
Patrick Delaunay19f58992018-05-17 15:24:05 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
4 */
5
6#include <common.h>
7#include <dm.h>
8#include <misc.h>
9#include <asm/io.h>
10#include <linux/iopoll.h>
11
12#define BSEC_OTP_MAX_VALUE 95
13
14#define BSEC_TIMEOUT_US 10000
15
16/* BSEC REGISTER OFFSET (base relative) */
17#define BSEC_OTP_CONF_OFF 0x000
18#define BSEC_OTP_CTRL_OFF 0x004
19#define BSEC_OTP_WRDATA_OFF 0x008
20#define BSEC_OTP_STATUS_OFF 0x00C
21#define BSEC_OTP_LOCK_OFF 0x010
22#define BSEC_DISTURBED_OFF 0x01C
23#define BSEC_ERROR_OFF 0x034
24#define BSEC_SPLOCK_OFF 0x064 /* Program safmem sticky lock */
25#define BSEC_SWLOCK_OFF 0x07C /* write in OTP sticky lock */
26#define BSEC_SRLOCK_OFF 0x094 /* shadowing sticky lock */
27#define BSEC_OTP_DATA_OFF 0x200
28
29/* BSEC_CONFIGURATION Register MASK */
30#define BSEC_CONF_POWER_UP 0x001
31
32/* BSEC_CONTROL Register */
33#define BSEC_READ 0x000
34#define BSEC_WRITE 0x100
35
36/* LOCK Register */
37#define OTP_LOCK_MASK 0x1F
38#define OTP_LOCK_BANK_SHIFT 0x05
39#define OTP_LOCK_BIT_MASK 0x01
40
41/* STATUS Register */
42#define BSEC_MODE_BUSY_MASK 0x08
43#define BSEC_MODE_PROGFAIL_MASK 0x10
44#define BSEC_MODE_PWR_MASK 0x20
45
46/*
47 * OTP Lock services definition
48 * Value must corresponding to the bit number in the register
49 */
50#define BSEC_LOCK_PROGRAM 0x04
51
52/**
53 * bsec_check_error() - Check status of one otp
54 * @base: base address of bsec IP
55 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
56 * Return: 0 if no error, -EAGAIN or -ENOTSUPP
57 */
58static u32 bsec_check_error(u32 base, u32 otp)
59{
60 u32 bit;
61 u32 bank;
62
63 bit = 1 << (otp & OTP_LOCK_MASK);
64 bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
65
66 if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
67 return -EAGAIN;
68 else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
69 return -ENOTSUPP;
70
71 return 0;
72}
73
74/**
75 * bsec_lock() - manage lock for each type SR/SP/SW
76 * @address: address of bsec IP register
77 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
78 * Return: true if locked else false
79 */
80static bool bsec_read_lock(u32 address, u32 otp)
81{
82 u32 bit;
83 u32 bank;
84
85 bit = 1 << (otp & OTP_LOCK_MASK);
86 bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
87
88 return !!(readl(address + bank) & bit);
89}
90
91/**
92 * bsec_read_SR_lock() - read SR lock (Shadowing)
93 * @base: base address of bsec IP
94 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
95 * Return: true if locked else false
96 */
97static bool bsec_read_SR_lock(u32 base, u32 otp)
98{
99 return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
100}
101
102/**
103 * bsec_read_SP_lock() - read SP lock (program Lock)
104 * @base: base address of bsec IP
105 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
106 * Return: true if locked else false
107 */
108static bool bsec_read_SP_lock(u32 base, u32 otp)
109{
110 return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
111}
112
113/**
114 * bsec_SW_lock() - manage SW lock (Write in Shadow)
115 * @base: base address of bsec IP
116 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
117 * Return: true if locked else false
118 */
119static bool bsec_read_SW_lock(u32 base, u32 otp)
120{
121 return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
122}
123
124/**
125 * bsec_power_safmem() - Activate or deactivate safmem power
126 * @base: base address of bsec IP
127 * @power: true to power up , false to power down
128 * Return: 0 if succeed
129 */
130static int bsec_power_safmem(u32 base, bool power)
131{
132 u32 val;
133 u32 mask;
134
135 if (power) {
136 setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
137 mask = BSEC_MODE_PWR_MASK;
138 } else {
139 clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
140 mask = 0;
141 }
142
143 /* waiting loop */
144 return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
145 val, (val & BSEC_MODE_PWR_MASK) == mask,
146 BSEC_TIMEOUT_US);
147}
148
149/**
150 * bsec_shadow_register() - copy safmen otp to bsec data
151 * @base: base address of bsec IP
152 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
153 * Return: 0 if no error
154 */
155static int bsec_shadow_register(u32 base, u32 otp)
156{
157 u32 val;
158 int ret;
159 bool power_up = false;
160
161 /* check if shadowing of otp is locked */
162 if (bsec_read_SR_lock(base, otp))
163 pr_debug("bsec : OTP %d is locked and refreshed with 0\n", otp);
164
165 /* check if safemem is power up */
166 val = readl(base + BSEC_OTP_STATUS_OFF);
167 if (!(val & BSEC_MODE_PWR_MASK)) {
168 ret = bsec_power_safmem(base, true);
169 if (ret)
170 return ret;
171 power_up = 1;
172 }
173 /* set BSEC_OTP_CTRL_OFF with the otp value*/
174 writel(otp | BSEC_READ, base + BSEC_OTP_CTRL_OFF);
175
176 /* check otp status*/
177 ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
178 val, (val & BSEC_MODE_BUSY_MASK) == 0,
179 BSEC_TIMEOUT_US);
180 if (ret)
181 return ret;
182
183 ret = bsec_check_error(base, otp);
184
185 if (power_up)
186 bsec_power_safmem(base, false);
187
188 return ret;
189}
190
191/**
192 * bsec_read_shadow() - read an otp data value from shadow
193 * @base: base address of bsec IP
194 * @val: read value
195 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
196 * Return: 0 if no error
197 */
198static int bsec_read_shadow(u32 base, u32 *val, u32 otp)
199{
200 *val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
201
202 return bsec_check_error(base, otp);
203}
204
205/**
206 * bsec_write_shadow() - write value in BSEC data register in shadow
207 * @base: base address of bsec IP
208 * @val: value to write
209 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
210 * Return: 0 if no error
211 */
212static int bsec_write_shadow(u32 base, u32 val, u32 otp)
213{
214 /* check if programming of otp is locked */
215 if (bsec_read_SW_lock(base, otp))
216 pr_debug("bsec : OTP %d is lock, write will be ignore\n", otp);
217
218 writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
219
220 return bsec_check_error(base, otp);
221}
222
223/**
224 * bsec_program_otp() - program a bit in SAFMEM
225 * @base: base address of bsec IP
226 * @val: value to program
227 * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
228 * after the function the otp data is not refreshed in shadow
229 * Return: 0 if no error
230 */
231static int bsec_program_otp(long base, u32 val, u32 otp)
232{
233 u32 ret;
234 bool power_up = false;
235
236 if (bsec_read_SP_lock(base, otp))
237 pr_debug("bsec : OTP %d locked, prog will be ignore\n", otp);
238
239 if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
240 pr_debug("bsec : Global lock, prog will be ignore\n");
241
242 /* check if safemem is power up */
243 if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
244 ret = bsec_power_safmem(base, true);
245 if (ret)
246 return ret;
247
248 power_up = true;
249 }
250 /* set value in write register*/
251 writel(val, base + BSEC_OTP_WRDATA_OFF);
252
253 /* set BSEC_OTP_CTRL_OFF with the otp value */
254 writel(otp | BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);
255
256 /* check otp status*/
257 ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
258 val, (val & BSEC_MODE_BUSY_MASK) == 0,
259 BSEC_TIMEOUT_US);
260 if (ret)
261 return ret;
262
263 if (val & BSEC_MODE_PROGFAIL_MASK)
264 ret = -EACCES;
265 else
266 ret = bsec_check_error(base, otp);
267
268 if (power_up)
269 bsec_power_safmem(base, false);
270
271 return ret;
272}
273
274/* BSEC MISC driver *******************************************************/
275struct stm32mp_bsec_platdata {
276 u32 base;
277};
278
279static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
280{
281 struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
282 u32 tmp_data = 0;
283 int ret;
284
285 /* read current shadow value */
286 ret = bsec_read_shadow(plat->base, &tmp_data, otp);
287 if (ret)
288 return ret;
289
290 /* copy otp in shadow */
291 ret = bsec_shadow_register(plat->base, otp);
292 if (ret)
293 return ret;
294
295 ret = bsec_read_shadow(plat->base, val, otp);
296 if (ret)
297 return ret;
298
299 /* restore shadow value */
300 ret = bsec_write_shadow(plat->base, tmp_data, otp);
301 return ret;
302}
303
304static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
305{
306 struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
307
308 return bsec_read_shadow(plat->base, val, otp);
309}
310
311static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
312{
313 struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
314
315 return bsec_program_otp(plat->base, val, otp);
316}
317
318static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
319{
320 struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
321
322 return bsec_write_shadow(plat->base, val, otp);
323}
324
325static int stm32mp_bsec_read(struct udevice *dev, int offset,
326 void *buf, int size)
327{
328 int ret;
329 int i;
330 bool shadow = true;
331 int nb_otp = size / sizeof(u32);
332 int otp;
333
334 if (offset >= STM32_BSEC_OTP_OFFSET) {
335 offset -= STM32_BSEC_OTP_OFFSET;
336 shadow = false;
337 }
338 otp = offset / sizeof(u32);
339
340 if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) {
341 dev_err(dev, "wrong value for otp, max value : %i\n",
342 BSEC_OTP_MAX_VALUE);
343 return -EINVAL;
344 }
345
346 for (i = otp; i < (otp + nb_otp); i++) {
347 u32 *addr = &((u32 *)buf)[i - otp];
348
349 if (shadow)
350 ret = stm32mp_bsec_read_shadow(dev, addr, i);
351 else
352 ret = stm32mp_bsec_read_otp(dev, addr, i);
353
354 if (ret)
355 break;
356 }
357 return ret;
358}
359
360static int stm32mp_bsec_write(struct udevice *dev, int offset,
361 const void *buf, int size)
362{
363 int ret = 0;
364 int i;
365 bool shadow = true;
366 int nb_otp = size / sizeof(u32);
367 int otp;
368
369 if (offset >= STM32_BSEC_OTP_OFFSET) {
370 offset -= STM32_BSEC_OTP_OFFSET;
371 shadow = false;
372 }
373 otp = offset / sizeof(u32);
374
375 if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) {
376 dev_err(dev, "wrong value for otp, max value : %d\n",
377 BSEC_OTP_MAX_VALUE);
378 return -EINVAL;
379 }
380
381 for (i = otp; i < otp + nb_otp; i++) {
382 u32 *val = &((u32 *)buf)[i - otp];
383
384 if (shadow)
385 ret = stm32mp_bsec_write_shadow(dev, *val, i);
386 else
387 ret = stm32mp_bsec_write_otp(dev, *val, i);
388 if (ret)
389 break;
390 }
391 return ret;
392}
393
394static const struct misc_ops stm32mp_bsec_ops = {
395 .read = stm32mp_bsec_read,
396 .write = stm32mp_bsec_write,
397};
398
399static int stm32mp_bsec_ofdata_to_platdata(struct udevice *dev)
400{
401 struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
402
403 plat->base = (u32)dev_read_addr_ptr(dev);
404
405 return 0;
406}
407
408static const struct udevice_id stm32mp_bsec_ids[] = {
409 { .compatible = "st,stm32mp-bsec" },
410 {}
411};
412
413U_BOOT_DRIVER(stm32mp_bsec) = {
414 .name = "stm32mp_bsec",
415 .id = UCLASS_MISC,
416 .of_match = stm32mp_bsec_ids,
417 .ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata,
418 .platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata),
419 .ops = &stm32mp_bsec_ops,
Patrick Delaunay19f58992018-05-17 15:24:05 +0200420};
421
422/* bsec IP is not present in device tee, manage IP address by platdata */
423static struct stm32mp_bsec_platdata stm32_bsec_platdata = {
424 .base = STM32_BSEC_BASE,
425};
426
427U_BOOT_DEVICE(stm32mp_bsec) = {
428 .name = "stm32mp_bsec",
429 .platdata = &stm32_bsec_platdata,
430};