Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 1 | /* |
| 2 | * eSPI controller driver. |
| 3 | * |
| 4 | * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| 5 | * Author: Mingkai Hu (Mingkai.hu@freescale.com) |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or |
| 8 | * modify it under the terms of the GNU General Public License as |
| 9 | * published by the Free Software Foundation; either version 2 of |
| 10 | * the License, or (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 20 | * MA 02111-1307 USA |
| 21 | */ |
| 22 | |
| 23 | #include <common.h> |
| 24 | |
| 25 | #include <malloc.h> |
| 26 | #include <spi.h> |
| 27 | #include <asm/immap_85xx.h> |
| 28 | |
| 29 | struct fsl_spi_slave { |
| 30 | struct spi_slave slave; |
| 31 | unsigned int div16; |
| 32 | unsigned int pm; |
| 33 | unsigned int mode; |
| 34 | size_t cmd_len; |
| 35 | u8 cmd_buf[16]; |
| 36 | size_t data_len; |
| 37 | unsigned int max_transfer_length; |
| 38 | }; |
| 39 | |
| 40 | #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) |
| 41 | |
| 42 | #define ESPI_MAX_CS_NUM 4 |
| 43 | |
| 44 | #define ESPI_EV_RNE (1 << 9) |
| 45 | #define ESPI_EV_TNF (1 << 8) |
| 46 | |
| 47 | #define ESPI_MODE_EN (1 << 31) /* Enable interface */ |
| 48 | #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ |
| 49 | #define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */ |
| 50 | |
| 51 | #define ESPI_COM_CS(x) ((x) << 30) |
| 52 | #define ESPI_COM_TRANLEN(x) ((x) << 0) |
| 53 | |
| 54 | #define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31) |
| 55 | #define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30) |
| 56 | #define ESPI_CSMODE_REV_MSB_FIRST (1 << 29) |
| 57 | #define ESPI_CSMODE_DIV16 (1 << 28) |
| 58 | #define ESPI_CSMODE_PM(x) ((x) << 24) |
| 59 | #define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20) |
| 60 | #define ESPI_CSMODE_LEN(x) ((x) << 16) |
| 61 | #define ESPI_CSMODE_CSBEF(x) ((x) << 12) |
| 62 | #define ESPI_CSMODE_CSAFT(x) ((x) << 8) |
| 63 | #define ESPI_CSMODE_CSCG(x) ((x) << 3) |
| 64 | |
| 65 | #define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \ |
| 66 | ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \ |
| 67 | ESPI_CSMODE_CSCG(1)) |
| 68 | |
| 69 | #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 |
| 70 | |
| 71 | struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| 72 | unsigned int max_hz, unsigned int mode) |
| 73 | { |
| 74 | struct fsl_spi_slave *fsl; |
| 75 | sys_info_t sysinfo; |
| 76 | unsigned long spibrg = 0; |
| 77 | unsigned char pm = 0; |
| 78 | |
| 79 | if (!spi_cs_is_valid(bus, cs)) |
| 80 | return NULL; |
| 81 | |
| 82 | fsl = malloc(sizeof(struct fsl_spi_slave)); |
| 83 | if (!fsl) |
| 84 | return NULL; |
| 85 | |
| 86 | fsl->slave.bus = bus; |
| 87 | fsl->slave.cs = cs; |
| 88 | fsl->mode = mode; |
| 89 | fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; |
| 90 | |
| 91 | /* Set eSPI BRG clock source */ |
| 92 | get_sys_info(&sysinfo); |
| 93 | spibrg = sysinfo.freqSystemBus / 2; |
| 94 | fsl->div16 = 0; |
| 95 | if ((spibrg / max_hz) > 32) { |
| 96 | fsl->div16 = ESPI_CSMODE_DIV16; |
| 97 | pm = spibrg / (max_hz * 16 * 2); |
| 98 | if (pm > 16) { |
| 99 | pm = 16; |
| 100 | debug("Requested speed is too low: %d Hz, " |
| 101 | "%d Hz is used.\n", max_hz, spibrg / (32 * 16)); |
| 102 | } |
| 103 | } else |
| 104 | pm = spibrg / (max_hz * 2); |
| 105 | if (pm) |
| 106 | pm--; |
| 107 | fsl->pm = pm; |
| 108 | |
| 109 | return &fsl->slave; |
| 110 | } |
| 111 | |
| 112 | void spi_free_slave(struct spi_slave *slave) |
| 113 | { |
| 114 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 115 | free(fsl); |
| 116 | } |
| 117 | |
| 118 | void spi_init(void) |
| 119 | { |
| 120 | |
| 121 | } |
| 122 | |
| 123 | int spi_claim_bus(struct spi_slave *slave) |
| 124 | { |
| 125 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 126 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 127 | unsigned char pm = fsl->pm; |
| 128 | unsigned int cs = slave->cs; |
| 129 | unsigned int mode = fsl->mode; |
| 130 | unsigned int div16 = fsl->div16; |
| 131 | int i; |
| 132 | |
| 133 | debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); |
| 134 | |
| 135 | /* Enable eSPI interface */ |
| 136 | out_be32(&espi->mode, ESPI_MODE_RXTHR(3) |
| 137 | | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); |
| 138 | |
| 139 | out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ |
| 140 | out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ |
| 141 | |
| 142 | /* Init CS mode interface */ |
| 143 | for (i = 0; i < ESPI_MAX_CS_NUM; i++) |
| 144 | out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); |
| 145 | |
| 146 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & |
| 147 | ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 |
| 148 | | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK |
| 149 | | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); |
| 150 | |
| 151 | /* Set eSPI BRG clock source */ |
| 152 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 153 | | ESPI_CSMODE_PM(pm) | div16); |
| 154 | |
| 155 | /* Set eSPI mode */ |
| 156 | if (mode & SPI_CPHA) |
| 157 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 158 | | ESPI_CSMODE_CP_BEGIN_EDGCLK); |
| 159 | if (mode & SPI_CPOL) |
| 160 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 161 | | ESPI_CSMODE_CI_INACTIVEHIGH); |
| 162 | |
| 163 | /* Character bit order: msb first */ |
| 164 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 165 | | ESPI_CSMODE_REV_MSB_FIRST); |
| 166 | |
| 167 | /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ |
| 168 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 169 | | ESPI_CSMODE_LEN(7)); |
| 170 | |
| 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | void spi_release_bus(struct spi_slave *slave) |
| 175 | { |
| 176 | |
| 177 | } |
| 178 | |
| 179 | int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, |
| 180 | void *data_in, unsigned long flags) |
| 181 | { |
| 182 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 183 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 184 | unsigned int tmpdout, tmpdin, event; |
| 185 | const void *dout = NULL; |
| 186 | void *din = NULL; |
| 187 | int len = 0; |
| 188 | int num_blks, num_chunks, max_tran_len, tran_len; |
| 189 | int num_bytes; |
| 190 | unsigned char *ch; |
| 191 | unsigned char *buffer = NULL; |
| 192 | size_t buf_len; |
| 193 | u8 *cmd_buf = fsl->cmd_buf; |
| 194 | size_t cmd_len = fsl->cmd_len; |
| 195 | size_t data_len = bitlen / 8; |
| 196 | size_t rx_offset = 0; |
| 197 | |
| 198 | max_tran_len = fsl->max_transfer_length; |
| 199 | switch (flags) { |
| 200 | case SPI_XFER_BEGIN: |
| 201 | cmd_len = fsl->cmd_len = data_len; |
| 202 | memcpy(cmd_buf, data_out, cmd_len); |
| 203 | return 0; |
| 204 | case 0: |
| 205 | case SPI_XFER_END: |
| 206 | if (bitlen == 0) { |
| 207 | spi_cs_deactivate(slave); |
| 208 | return 0; |
| 209 | } |
| 210 | buf_len = 2 * cmd_len + min(data_len, max_tran_len); |
| 211 | len = cmd_len + data_len; |
| 212 | rx_offset = cmd_len; |
| 213 | buffer = (unsigned char *)malloc(buf_len); |
| 214 | if (!buffer) { |
| 215 | debug("SF: Failed to malloc memory.\n"); |
| 216 | return 1; |
| 217 | } |
| 218 | memcpy(buffer, cmd_buf, cmd_len); |
| 219 | if (cmd_len != 1) { |
| 220 | if (data_in == NULL) |
| 221 | memcpy(buffer + cmd_len, data_out, data_len); |
| 222 | } |
| 223 | break; |
| 224 | case SPI_XFER_BEGIN | SPI_XFER_END: |
| 225 | len = data_len; |
| 226 | buffer = (unsigned char *)malloc(len * 2); |
| 227 | if (!buffer) { |
| 228 | debug("SF: Failed to malloc memory.\n"); |
| 229 | return 1; |
| 230 | } |
| 231 | memcpy(buffer, data_out, len); |
| 232 | rx_offset = len; |
| 233 | cmd_len = 0; |
| 234 | break; |
| 235 | } |
| 236 | |
| 237 | debug("spi_xfer: slave %u:%u dout %08X(%08x) din %08X(%08x) len %u\n", |
| 238 | slave->bus, slave->cs, *(uint *) dout, |
| 239 | dout, *(uint *) din, din, len); |
| 240 | |
| 241 | num_chunks = data_len / max_tran_len + |
| 242 | (data_len % max_tran_len ? 1 : 0); |
| 243 | while (num_chunks--) { |
| 244 | if (data_in) |
| 245 | din = buffer + rx_offset; |
| 246 | dout = buffer; |
| 247 | tran_len = min(data_len , max_tran_len); |
| 248 | num_blks = (tran_len + cmd_len) / 4 + |
| 249 | ((tran_len + cmd_len) % 4 ? 1 : 0); |
| 250 | num_bytes = (tran_len + cmd_len) % 4; |
| 251 | fsl->data_len = tran_len + cmd_len; |
| 252 | spi_cs_activate(slave); |
| 253 | |
| 254 | /* Clear all eSPI events */ |
| 255 | out_be32(&espi->event , 0xffffffff); |
| 256 | /* handle data in 32-bit chunks */ |
| 257 | while (num_blks--) { |
| 258 | |
| 259 | event = in_be32(&espi->event); |
| 260 | if (event & ESPI_EV_TNF) { |
| 261 | tmpdout = *(u32 *)dout; |
| 262 | |
| 263 | /* Set up the next iteration */ |
| 264 | if (len > 4) { |
| 265 | len -= 4; |
| 266 | dout += 4; |
| 267 | } |
| 268 | |
| 269 | out_be32(&espi->tx, tmpdout); |
| 270 | out_be32(&espi->event, ESPI_EV_TNF); |
| 271 | debug("***spi_xfer:...%08x written\n", tmpdout); |
| 272 | } |
| 273 | |
| 274 | /* Wait for eSPI transmit to get out */ |
| 275 | udelay(80); |
| 276 | |
| 277 | event = in_be32(&espi->event); |
| 278 | if (event & ESPI_EV_RNE) { |
| 279 | tmpdin = in_be32(&espi->rx); |
| 280 | if (num_blks == 0 && num_bytes != 0) { |
| 281 | ch = (unsigned char *)&tmpdin; |
| 282 | while (num_bytes--) |
| 283 | *(unsigned char *)din++ = *ch++; |
| 284 | } else { |
| 285 | *(u32 *) din = tmpdin; |
| 286 | din += 4; |
| 287 | } |
| 288 | |
| 289 | out_be32(&espi->event, in_be32(&espi->event) |
| 290 | | ESPI_EV_RNE); |
| 291 | debug("***spi_xfer:...%08x readed\n", tmpdin); |
| 292 | } |
| 293 | } |
| 294 | if (data_in) { |
| 295 | memcpy(data_in, buffer + 2 * cmd_len, tran_len); |
| 296 | if (*buffer == 0x0b) { |
| 297 | data_in += tran_len; |
| 298 | data_len -= tran_len; |
| 299 | *(int *)buffer += tran_len; |
| 300 | } |
| 301 | } |
| 302 | spi_cs_deactivate(slave); |
| 303 | } |
| 304 | |
| 305 | free(buffer); |
| 306 | return 0; |
| 307 | } |
| 308 | |
| 309 | int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| 310 | { |
| 311 | return bus == 0 && cs < ESPI_MAX_CS_NUM; |
| 312 | } |
| 313 | |
| 314 | void spi_cs_activate(struct spi_slave *slave) |
| 315 | { |
| 316 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 317 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 318 | unsigned int com = 0; |
| 319 | size_t data_len = fsl->data_len; |
| 320 | |
| 321 | com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); |
| 322 | com |= ESPI_COM_CS(slave->cs); |
| 323 | com |= ESPI_COM_TRANLEN(data_len - 1); |
| 324 | out_be32(&espi->com, com); |
| 325 | } |
| 326 | |
| 327 | void spi_cs_deactivate(struct spi_slave *slave) |
| 328 | { |
| 329 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 330 | |
| 331 | /* clear the RXCNT and TXCNT */ |
| 332 | out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); |
| 333 | out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); |
| 334 | } |