blob: 77f88d2422a3900b461a42735872c21e584ce474 [file] [log] [blame]
Bin Menga65b25d2015-05-07 21:34:08 +08001/*
2 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7/*
8 * board/config.h - configuration options, board specific
9 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14#include <configs/x86-common.h>
15
16#define CONFIG_SYS_MONITOR_LEN (1 << 20)
17
Bin Menga65b25d2015-05-07 21:34:08 +080018#define CONFIG_X86_SERIAL
19
20#define CONFIG_PCI_MEM_BUS 0xc0000000
21#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
22#define CONFIG_PCI_MEM_SIZE 0x10000000
23
24#define CONFIG_PCI_PREF_BUS 0xd0000000
25#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
26#define CONFIG_PCI_PREF_SIZE 0x10000000
27
28#define CONFIG_PCI_IO_BUS 0x2000
29#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
30#define CONFIG_PCI_IO_SIZE 0xe000
31
32#define CONFIG_PCI_PNP
33#define CONFIG_E1000
34
Bin Meng9c4f5412015-05-11 07:36:30 +080035#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,vga\0" \
36 "stdout=serial,vga\0" \
37 "stderr=serial,vga\0"
Bin Menga65b25d2015-05-07 21:34:08 +080038
Bin Meng2aa3a7f2015-05-16 09:33:19 +080039/*
40 * ATA/SATA support for QEMU x86 targets
41 * - Only legacy IDE controller is supported for QEMU '-M pc' target
42 * - AHCI controller is supported for QEMU '-M q35' target
43 *
44 * Default configuraion is to support the QEMU default x86 target
45 * Undefine CONFIG_CMD_IDE to support q35 target
46 */
47#define CONFIG_CMD_IDE
48#ifdef CONFIG_CMD_IDE
49#define CONFIG_SYS_IDE_MAXBUS 2
50#define CONFIG_SYS_IDE_MAXDEVICE 4
51#define CONFIG_SYS_ATA_BASE_ADDR 0
52#define CONFIG_SYS_ATA_DATA_OFFSET 0
53#define CONFIG_SYS_ATA_REG_OFFSET 0
54#define CONFIG_SYS_ATA_ALT_OFFSET 0
55#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
56#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
57#define CONFIG_ATAPI
58
59#undef CONFIG_SCSI_AHCI
60#undef CONFIG_CMD_SCSI
61#else
Bin Menga65b25d2015-05-07 21:34:08 +080062#define CONFIG_SCSI_DEV_LIST \
Bin Meng2aa3a7f2015-05-16 09:33:19 +080063 {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
64#endif
Bin Menga65b25d2015-05-07 21:34:08 +080065
66/* GPIO is not supported */
67#undef CONFIG_INTEL_ICH6_GPIO
68#undef CONFIG_CMD_GPIO
69
70/* SPI is not supported */
71#undef CONFIG_ICH_SPI
72#undef CONFIG_ENV_IS_IN_SPI_FLASH
73#define CONFIG_ENV_IS_NOWHERE
74
Bin Menga65b25d2015-05-07 21:34:08 +080075#endif /* __CONFIG_H */