blob: 50b44da9864809d85fb8ce0d41e4c4fb7bb9ba8e [file] [log] [blame]
Aubrey Li26bf7de2007-03-19 01:24:52 +08001/*
2 * File: include/asm-blackfin/arch-bf537/anomaly.h
3 * Based on:
4 * Author:
5 *
6 * Created:
7 * Description:
8 *
9 * Rev:
10 *
11 * Modified:
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2, or (at your option)
18 * any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; see the file COPYING.
27 * If not, write to the Free Software Foundation,
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
29 */
30
31/* This file shoule be up to date with:
32 * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
33 * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
34 * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
35 */
36
37#ifndef _MACH_ANOMALY_H_
38#define _MACH_ANOMALY_H_
39
40/* We do not support 0.1 silicon - sorry */
41#if (defined(CONFIG_BF_REV_0_1))
42#error Kernel will not work on BF537/6/4 Version 0.1
43#endif
44
45#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
46#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
47 slot1 and store of a P register in slot 2 is not
48 supported */
49#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
50 Channel DMA stops */
51#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
52 registers. */
53#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
54 upper bits */
55#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
56 syncs */
57#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
58#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
59 Changed */
60#endif
61#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
62 SPORT external receive and transmit clocks. */
63#define ANOMALY_05000272 /* Certain data cache write through modes fail for
64 VDDint <=0.9V */
65#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
66#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
67 an edge is detected may clear interrupt */
68#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
69 not restored */
70#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
71 control */
72#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
73 killed in a particular stage */
74#endif
75
76#if defined(CONFIG_BF_REV_0_2)
77#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
78 IDLE around a Change of Control causes
79 unpredictable results */
80#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
81 (TDM) */
82#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
83#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
84#endif
85#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
86#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
87 interrupt not functional */
88#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
89#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
90#endif
91#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
92 loops may cause the instruction fetch unit to
93 malfunction */
94#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
95 the ICPLB Data registers differ */
96#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
97#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
98#define ANOMALY_05000262 /* Stores to data cache may be lost */
99#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
100#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
101 instruction will cause an infinite stall in the
102 second to last instruction in a hardware loop */
103#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
104 and non-zero DEB_TRAFFIC_PERIOD value */
105#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
106 internal voltage regulator (VDDint) to decrease */
107#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
108 an edge is detected may clear interrupt */
109#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
110 DMA system instability */
111#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
112 Atmel Dataflash devices */
113
114#endif /* CONFIG_BF_REV_0_2 */
115
116#endif /* _MACH_ANOMALY_H_ */