blob: cc8873117ef7411fa9a67dd4176c35bc34e46a1a [file] [log] [blame]
Haiying Wang765547d2009-03-27 17:02:45 -04001/*
2 * Copyright 2009 Freescale Semiconductor.
3 *
4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25#include <common.h>
26#include <pci.h>
27#include <asm/processor.h>
28#include <asm/mmu.h>
29#include <asm/immap_85xx.h>
Kumar Galac8514622009-04-02 13:22:48 -050030#include <asm/fsl_pci.h>
Haiying Wang765547d2009-03-27 17:02:45 -040031#include <asm/fsl_ddr_sdram.h>
32#include <asm/io.h>
33#include <spd_sdram.h>
34#include <i2c.h>
35#include <ioports.h>
36#include <libfdt.h>
37#include <fdt_support.h>
38
39#include "bcsr.h"
40
41phys_size_t fixed_sdram(void);
42
43const qe_iop_conf_t qe_iop_conf_tab[] = {
44 /* QE_MUX_MDC */
45 {2, 31, 1, 0, 1}, /* QE_MUX_MDC */
46
47 /* QE_MUX_MDIO */
48 {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */
49
Haiying Wangf82107f2009-05-20 12:30:37 -040050#if defined(CONFIG_SYS_UCC_RGMII_MODE)
Haiying Wang765547d2009-03-27 17:02:45 -040051 /* UCC_1_RGMII */
52 {2, 11, 2, 0, 1}, /* CLK12 */
53 {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
54 {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
55 {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */
56 {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
57 {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
58 {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
59 {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
60 {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
61 {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
62 {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
63 {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */
64 {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */
65
66 /* UCC_2_RGMII */
67 {2, 16, 2, 0, 3}, /* CLK17 */
68 {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
69 {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
70 {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */
71 {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */
72 {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
73 {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
74 {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */
75 {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */
76 {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
77 {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
78 {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */
79 {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */
80
Haiying Wang750098d2009-05-20 12:30:36 -040081 /* UCC_3_RGMII */
82 {2, 11, 2, 0, 1}, /* CLK12 */
83 {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
84 {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
85 {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */
86 {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */
87 {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
88 {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
89 {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */
90 {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */
91 {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
92 {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
93 {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */
94 {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */
95
96 /* UCC_4_RGMII */
97 {2, 16, 2, 0, 3}, /* CLK17 */
98 {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
99 {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
100 {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */
101 {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */
102 {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
103 {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
104 {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */
105 {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */
106 {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
107 {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
108 {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */
109 {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */
110
Haiying Wangf82107f2009-05-20 12:30:37 -0400111#elif defined(CONFIG_SYS_UCC_RMII_MODE)
112 /* UCC_1_RMII */
113 {2, 15, 2, 0, 1}, /* CLK16 */
114 {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
115 {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
116 {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
117 {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
118 {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
119 {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
120
121 /* UCC_2_RMII */
122 {2, 15, 2, 0, 1}, /* CLK16 */
123 {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
124 {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
125 {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
126 {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
127 {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
128 {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
129
130 /* UCC_3_RMII */
131 {2, 15, 2, 0, 1}, /* CLK16 */
132 {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
133 {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
134 {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
135 {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
136 {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
137 {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
138
139 /* UCC_4_RMII */
140 {2, 15, 2, 0, 1}, /* CLK16 */
141 {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
142 {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
143 {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
144 {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
145 {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
146 {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
147#endif
148
Haiying Wangb2aab382009-05-20 12:30:33 -0400149 /* UART1 is muxed with QE PortF bit [9-12].*/
150 {5, 12, 2, 0, 3}, /* UART1_SIN */
151 {5, 9, 1, 0, 3}, /* UART1_SOUT */
152 {5, 10, 2, 0, 3}, /* UART1_CTS_B */
153 {5, 11, 1, 0, 2}, /* UART1_RTS_B */
154
Haiying Wang765547d2009-03-27 17:02:45 -0400155 {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
156};
157
158void local_bus_init(void);
159
160int board_early_init_f (void)
161{
162 /*
163 * Initialize local bus.
164 */
165 local_bus_init ();
166
167 enable_8569mds_flash_write();
168
169#ifdef CONFIG_QE
Haiying Wangf82107f2009-05-20 12:30:37 -0400170 enable_8569mds_qe_uec();
Haiying Wang765547d2009-03-27 17:02:45 -0400171#endif
172
173#if CONFIG_SYS_I2C2_OFFSET
174 /* Enable I2C2 signals instead of SD signals */
175 volatile struct ccsr_gur *gur;
176 gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
177 gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
178 gur->plppar1 |= PLPPAR1_I2C2_VAL;
179 gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
180 gur->plpdir1 |= PLPDIR1_I2C2_VAL;
181
182 disable_8569mds_brd_eeprom_write_protect();
183#endif
184
185 return 0;
186}
187
188int checkboard (void)
189{
190 printf ("Board: 8569 MDS\n");
191
192 return 0;
193}
194
195phys_size_t
196initdram(int board_type)
197{
198 long dram_size = 0;
199
200 puts("Initializing\n");
201
202#if defined(CONFIG_DDR_DLL)
203 /*
204 * Work around to stabilize DDR DLL MSYNC_IN.
205 * Errata DDR9 seems to have been fixed.
206 * This is now the workaround for Errata DDR11:
207 * Override DLL = 1, Course Adj = 1, Tap Select = 0
208 */
209 volatile ccsr_gur_t *gur =
210 (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
211
212 out_be32(&gur->ddrdllcr, 0x81000000);
213 udelay(200);
214#endif
215
216#ifdef CONFIG_SPD_EEPROM
217 dram_size = fsl_ddr_sdram();
218#else
219 dram_size = fixed_sdram();
220#endif
221
222 dram_size = setup_ddr_tlbs(dram_size / 0x100000);
223 dram_size *= 0x100000;
224
225 puts(" DDR: ");
226 return dram_size;
227}
228
229#if !defined(CONFIG_SPD_EEPROM)
230phys_size_t fixed_sdram(void)
231{
232 volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
233 uint d_init;
234
235 out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
236 out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
237 out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
238 out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
239 out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
240 out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
241 out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
242 out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
243 out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
244 out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
245 out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
246 out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
247 out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
248 out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
249 out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
250 out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
251 out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
252 out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
253#if defined (CONFIG_DDR_ECC)
254 out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
255 out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
256 out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
257#endif
258 udelay(500);
259
260 out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
261#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
262 d_init = 1;
263 debug("DDR - 1st controller: memory initializing\n");
264 /*
265 * Poll until memory is initialized.
266 * 512 Meg at 400 might hit this 200 times or so.
267 */
268 while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
269 udelay(1000);
270 }
271 debug("DDR: memory initialized\n\n");
272 udelay(500);
273#endif
274 return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
275}
276#endif
277
278/*
279 * Initialize Local Bus
280 */
281void
282local_bus_init(void)
283{
284 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
285 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
286
287 uint clkdiv;
288 uint lbc_hz;
289 sys_info_t sysinfo;
290
291 get_sys_info(&sysinfo);
292 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
293 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
294
295 out_be32(&gur->lbiuiplldcr1, 0x00078080);
296 if (clkdiv == 16)
297 out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
298 else if (clkdiv == 8)
299 out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
300 else if (clkdiv == 4)
301 out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
302
303 out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
304}
305
306#ifdef CONFIG_PCIE1
307static struct pci_controller pcie1_hose;
308#endif /* CONFIG_PCIE1 */
309
Haiying Wang765547d2009-03-27 17:02:45 -0400310int first_free_busno = 0;
311
312#ifdef CONFIG_PCI
313void
314pci_init_board(void)
315{
316 volatile ccsr_gur_t *gur;
317 uint io_sel;
318 uint host_agent;
319
320 gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
321 io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
322 host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
323
324#ifdef CONFIG_PCIE1
325{
326 volatile ccsr_fsl_pci_t *pci;
327 struct pci_controller *hose;
328 int pcie_ep;
329 struct pci_region *r;
330 int pcie_configured;
331
332 pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
333 hose = &pcie1_hose;
Kumar Gala865f24d2009-09-02 09:03:08 -0500334 pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
Haiying Wang765547d2009-03-27 17:02:45 -0400335 r = hose->regions;
Kumar Gala865f24d2009-09-02 09:03:08 -0500336 pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
Haiying Wang765547d2009-03-27 17:02:45 -0400337
338 if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
339 printf ("\n PCIE connected to slot as %s (base address %x)",
340 pcie_ep ? "End Point" : "Root Complex",
341 (uint)pci);
342
343 if (pci->pme_msg_det) {
344 pci->pme_msg_det = 0xffffffff;
345 debug (" with errors. Clearing. Now 0x%08x",
346 pci->pme_msg_det);
347 }
348 printf ("\n");
349
Haiying Wang765547d2009-03-27 17:02:45 -0400350 /* outbound memory */
351 pci_set_region(r++,
352 CONFIG_SYS_PCIE1_MEM_BUS,
353 CONFIG_SYS_PCIE1_MEM_PHYS,
354 CONFIG_SYS_PCIE1_MEM_SIZE,
355 PCI_REGION_MEM);
356
357 /* outbound io */
358 pci_set_region(r++,
359 CONFIG_SYS_PCIE1_IO_BUS,
360 CONFIG_SYS_PCIE1_IO_PHYS,
361 CONFIG_SYS_PCIE1_IO_SIZE,
362 PCI_REGION_IO);
363
364 hose->region_count = r - hose->regions;
365
366 hose->first_busno=first_free_busno;
Haiying Wang765547d2009-03-27 17:02:45 -0400367
Kumar Galafb3143b2009-08-03 20:44:55 -0500368 fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
Haiying Wang765547d2009-03-27 17:02:45 -0400369 printf ("PCIE on bus %02x - %02x\n",
370 hose->first_busno,hose->last_busno);
371
372 first_free_busno=hose->last_busno+1;
373
374 } else {
375 printf (" PCIE: disabled\n");
376 }
377}
378#else
379 gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
380#endif
381}
382#endif /* CONFIG_PCI */
383
384#if defined(CONFIG_OF_BOARD_SETUP)
Haiying Wang765547d2009-03-27 17:02:45 -0400385void ft_board_setup(void *blob, bd_t *bd)
386{
Haiying Wangf82107f2009-05-20 12:30:37 -0400387#if defined(CONFIG_SYS_UCC_RMII_MODE)
388 int nodeoff, off, err;
389 unsigned int val;
390 const u32 *ph;
391 const u32 *index;
392
393 /* fixup device tree for supporting rmii mode */
394 nodeoff = -1;
395 while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
396 "ucc_geth")) >= 0) {
397 err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
398 "clk16");
399 if (err < 0) {
400 printf("WARNING: could not set tx-clock-name %s.\n",
401 fdt_strerror(err));
402 break;
403 }
404
405 err = fdt_setprop_string(blob, nodeoff, "phy-connection-type",
406 "rmii");
407 if (err < 0) {
408 printf("WARNING: could not set phy-connection-type "
409 "%s.\n", fdt_strerror(err));
410 break;
411 }
412
413 index = fdt_getprop(blob, nodeoff, "cell-index", 0);
414 if (index == NULL) {
415 printf("WARNING: could not get cell-index of ucc\n");
416 break;
417 }
418
419 ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
420 if (ph == NULL) {
421 printf("WARNING: could not get phy-handle of ucc\n");
422 break;
423 }
424
425 off = fdt_node_offset_by_phandle(blob, *ph);
426 if (off < 0) {
427 printf("WARNING: could not get phy node %s.\n",
428 fdt_strerror(err));
429 break;
430 }
431
432 val = 0x7 + *index; /* RMII phy address starts from 0x8 */
433
434 err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
435 if (err < 0) {
436 printf("WARNING: could not set reg for phy-handle "
437 "%s.\n", fdt_strerror(err));
438 break;
439 }
440 }
441#endif
Haiying Wang765547d2009-03-27 17:02:45 -0400442 ft_cpu_setup(blob, bd);
443
444#ifdef CONFIG_PCIE1
445 ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
446#endif
447}
448#endif