| Lokesh Vutla | cec6a6b | 2015-09-19 15:00:21 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2014 Texas Instruments, Inc. |
| 3 | * |
| 4 | * Keystone 2 Lamarr SoC specific device tree |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | / { |
| 12 | cpus { |
| 13 | #address-cells = <1>; |
| 14 | #size-cells = <0>; |
| 15 | |
| 16 | interrupt-parent = <&gic>; |
| 17 | |
| 18 | cpu@0 { |
| 19 | compatible = "arm,cortex-a15"; |
| 20 | device_type = "cpu"; |
| 21 | reg = <0>; |
| 22 | }; |
| 23 | |
| 24 | cpu@1 { |
| 25 | compatible = "arm,cortex-a15"; |
| 26 | device_type = "cpu"; |
| 27 | reg = <1>; |
| 28 | }; |
| 29 | }; |
| 30 | |
| 31 | soc { |
| 32 | /include/ "k2l-clocks.dtsi" |
| 33 | |
| 34 | uart2: serial@02348400 { |
| 35 | compatible = "ns16550a"; |
| 36 | current-speed = <115200>; |
| 37 | reg-shift = <2>; |
| 38 | reg-io-width = <4>; |
| 39 | reg = <0x02348400 0x100>; |
| 40 | clocks = <&clkuart2>; |
| 41 | interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>; |
| 42 | }; |
| 43 | |
| 44 | uart3: serial@02348800 { |
| 45 | compatible = "ns16550a"; |
| 46 | current-speed = <115200>; |
| 47 | reg-shift = <2>; |
| 48 | reg-io-width = <4>; |
| 49 | reg = <0x02348800 0x100>; |
| 50 | clocks = <&clkuart3>; |
| 51 | interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; |
| 52 | }; |
| 53 | |
| 54 | dspgpio0: keystone_dsp_gpio@02620240 { |
| 55 | compatible = "ti,keystone-dsp-gpio"; |
| 56 | gpio-controller; |
| 57 | #gpio-cells = <2>; |
| 58 | gpio,syscon-dev = <&devctrl 0x240>; |
| 59 | }; |
| 60 | |
| 61 | dspgpio1: keystone_dsp_gpio@2620244 { |
| 62 | compatible = "ti,keystone-dsp-gpio"; |
| 63 | gpio-controller; |
| 64 | #gpio-cells = <2>; |
| 65 | gpio,syscon-dev = <&devctrl 0x244>; |
| 66 | }; |
| 67 | |
| 68 | dspgpio2: keystone_dsp_gpio@2620248 { |
| 69 | compatible = "ti,keystone-dsp-gpio"; |
| 70 | gpio-controller; |
| 71 | #gpio-cells = <2>; |
| 72 | gpio,syscon-dev = <&devctrl 0x248>; |
| 73 | }; |
| 74 | |
| 75 | dspgpio3: keystone_dsp_gpio@262024c { |
| 76 | compatible = "ti,keystone-dsp-gpio"; |
| 77 | gpio-controller; |
| 78 | #gpio-cells = <2>; |
| 79 | gpio,syscon-dev = <&devctrl 0x24c>; |
| 80 | }; |
| 81 | |
| 82 | mdio: mdio@26200f00 { |
| 83 | compatible = "ti,keystone_mdio", "ti,davinci_mdio"; |
| 84 | #address-cells = <1>; |
| 85 | #size-cells = <0>; |
| 86 | reg = <0x26200f00 0x100>; |
| 87 | status = "disabled"; |
| 88 | clocks = <&clkcpgmac>; |
| 89 | clock-names = "fck"; |
| 90 | bus_freq = <2500000>; |
| 91 | }; |
| 92 | /include/ "k2l-netcp.dtsi" |
| 93 | }; |
| 94 | }; |
| 95 | |
| 96 | &spi0 { |
| 97 | ti,davinci-spi-num-cs = <5>; |
| 98 | }; |
| 99 | |
| 100 | &spi1 { |
| 101 | ti,davinci-spi-num-cs = <3>; |
| 102 | }; |
| 103 | |
| 104 | &spi2 { |
| 105 | ti,davinci-spi-num-cs = <5>; |
| 106 | /* Pin muxed. Enabled and configured by Bootloader */ |
| 107 | status = "disabled"; |
| 108 | }; |