blob: f2f7b7a92571b0a0af56bca0fc0fc19249898b28 [file] [log] [blame]
Diego Rondinie7c15b72019-11-19 14:43:33 +01001/*
2 * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3 * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45
46#include "sun8i-h3.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49
50/ {
51 model = "OrangePi Zero Plus2 H3";
52 compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
53
54 aliases {
55 serial0 = &uart0;
56 };
57
58 chosen {
59 stdout-path = "serial0:115200n8";
60 };
61
62 connector {
63 compatible = "hdmi-connector";
64 type = "a";
65
66 port {
67 hdmi_con_in: endpoint {
68 remote-endpoint = <&hdmi_out_con>;
69 };
70 };
71 };
72
73 reg_vcc3v3: vcc3v3 {
74 compatible = "regulator-fixed";
75 regulator-name = "vcc3v3";
76 regulator-min-microvolt = <3300000>;
77 regulator-max-microvolt = <3300000>;
78 };
79
80 wifi_pwrseq: wifi_pwrseq {
81 compatible = "mmc-pwrseq-simple";
82 reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
83 post-power-on-delay-ms = <200>;
84 };
85};
86
87&de {
88 status = "okay";
89};
90
91&hdmi {
92 status = "okay";
93};
94
95&hdmi_out {
96 hdmi_out_con: endpoint {
97 remote-endpoint = <&hdmi_con_in>;
98 };
99};
100
101&mmc0 {
102 vmmc-supply = <&reg_vcc3v3>;
103 bus-width = <4>;
104 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
105 status = "okay";
106};
107
108&mmc1 {
109 vmmc-supply = <&reg_vcc3v3>;
110 vqmmc-supply = <&reg_vcc3v3>;
111 mmc-pwrseq = <&wifi_pwrseq>;
112 bus-width = <4>;
113 non-removable;
114 status = "okay";
115
116 brcmf: wifi@1 {
117 reg = <1>;
118 compatible = "brcm,bcm4329-fmac";
119 interrupt-parent = <&r_pio>;
120 interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
121 interrupt-names = "host-wake";
122 };
123};
124
125&mmc2 {
126 pinctrl-names = "default";
127 pinctrl-0 = <&mmc2_8bit_pins>;
128 vmmc-supply = <&reg_vcc3v3>;
129 bus-width = <8>;
130 non-removable;
131 cap-mmc-hw-reset;
132 status = "okay";
133};
134
135&uart0 {
136 pinctrl-names = "default";
137 pinctrl-0 = <&uart0_pins_a>;
138 status = "okay";
139};