Simon Glass | 6f96785 | 2016-05-05 07:28:12 -0600 | [diff] [blame] | 1 | /* |
| 2 | * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC |
| 3 | * applies to AT91SAM9G45, AT91SAM9M10, |
| 4 | * AT91SAM9G46, AT91SAM9M11 SoC |
| 5 | * |
| 6 | * Copyright (C) 2011 Atmel, |
| 7 | * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> |
| 8 | * |
| 9 | * Licensed under GPLv2 or later. |
| 10 | */ |
| 11 | |
| 12 | #include "skeleton.dtsi" |
| 13 | #include <dt-bindings/dma/at91.h> |
| 14 | #include <dt-bindings/pinctrl/at91.h> |
| 15 | #include <dt-bindings/interrupt-controller/irq.h> |
| 16 | #include <dt-bindings/gpio/gpio.h> |
| 17 | #include <dt-bindings/clock/at91.h> |
| 18 | |
| 19 | / { |
| 20 | model = "Atmel AT91SAM9G45 family SoC"; |
| 21 | compatible = "atmel,at91sam9g45"; |
| 22 | interrupt-parent = <&aic>; |
| 23 | |
| 24 | aliases { |
| 25 | serial0 = &dbgu; |
| 26 | serial1 = &usart0; |
| 27 | serial2 = &usart1; |
| 28 | serial3 = &usart2; |
| 29 | serial4 = &usart3; |
| 30 | gpio0 = &pioA; |
| 31 | gpio1 = &pioB; |
| 32 | gpio2 = &pioC; |
| 33 | gpio3 = &pioD; |
| 34 | gpio4 = &pioE; |
| 35 | tcb0 = &tcb0; |
| 36 | tcb1 = &tcb1; |
| 37 | i2c0 = &i2c0; |
| 38 | i2c1 = &i2c1; |
| 39 | ssc0 = &ssc0; |
| 40 | ssc1 = &ssc1; |
| 41 | pwm0 = &pwm0; |
| 42 | }; |
| 43 | cpus { |
| 44 | #address-cells = <0>; |
| 45 | #size-cells = <0>; |
| 46 | |
| 47 | cpu { |
| 48 | compatible = "arm,arm926ej-s"; |
| 49 | device_type = "cpu"; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | memory { |
| 54 | reg = <0x70000000 0x10000000>; |
| 55 | }; |
| 56 | |
| 57 | clocks { |
| 58 | slow_xtal: slow_xtal { |
| 59 | compatible = "fixed-clock"; |
| 60 | #clock-cells = <0>; |
| 61 | clock-frequency = <0>; |
| 62 | }; |
| 63 | |
| 64 | main_xtal: main_xtal { |
| 65 | compatible = "fixed-clock"; |
| 66 | #clock-cells = <0>; |
| 67 | clock-frequency = <0>; |
| 68 | }; |
| 69 | |
| 70 | adc_op_clk: adc_op_clk{ |
| 71 | compatible = "fixed-clock"; |
| 72 | #clock-cells = <0>; |
| 73 | clock-frequency = <300000>; |
| 74 | }; |
| 75 | }; |
| 76 | |
| 77 | sram: sram@00300000 { |
| 78 | compatible = "mmio-sram"; |
| 79 | reg = <0x00300000 0x10000>; |
| 80 | }; |
| 81 | |
| 82 | ahb { |
| 83 | compatible = "simple-bus"; |
| 84 | #address-cells = <1>; |
| 85 | #size-cells = <1>; |
| 86 | ranges; |
| 87 | |
| 88 | apb { |
| 89 | compatible = "simple-bus"; |
| 90 | #address-cells = <1>; |
| 91 | #size-cells = <1>; |
| 92 | ranges; |
| 93 | |
| 94 | aic: interrupt-controller@fffff000 { |
| 95 | #interrupt-cells = <3>; |
| 96 | compatible = "atmel,at91rm9200-aic"; |
| 97 | interrupt-controller; |
| 98 | reg = <0xfffff000 0x200>; |
| 99 | atmel,external-irqs = <31>; |
| 100 | }; |
| 101 | |
| 102 | ramc0: ramc@ffffe400 { |
| 103 | compatible = "atmel,at91sam9g45-ddramc"; |
| 104 | reg = <0xffffe400 0x200>; |
| 105 | clocks = <&ddrck>; |
| 106 | clock-names = "ddrck"; |
| 107 | }; |
| 108 | |
| 109 | ramc1: ramc@ffffe600 { |
| 110 | compatible = "atmel,at91sam9g45-ddramc"; |
| 111 | reg = <0xffffe600 0x200>; |
| 112 | clocks = <&ddrck>; |
| 113 | clock-names = "ddrck"; |
| 114 | }; |
| 115 | |
| 116 | pmc: pmc@fffffc00 { |
| 117 | compatible = "atmel,at91sam9g45-pmc", "syscon"; |
| 118 | reg = <0xfffffc00 0x100>; |
| 119 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 120 | interrupt-controller; |
| 121 | #address-cells = <1>; |
| 122 | #size-cells = <0>; |
| 123 | #interrupt-cells = <1>; |
| 124 | |
| 125 | main_osc: main_osc { |
| 126 | compatible = "atmel,at91rm9200-clk-main-osc"; |
| 127 | #clock-cells = <0>; |
| 128 | interrupts-extended = <&pmc AT91_PMC_MOSCS>; |
| 129 | clocks = <&main_xtal>; |
| 130 | }; |
| 131 | |
| 132 | main: mainck { |
| 133 | compatible = "atmel,at91rm9200-clk-main"; |
| 134 | #clock-cells = <0>; |
| 135 | clocks = <&main_osc>; |
| 136 | }; |
| 137 | |
| 138 | plla: pllack { |
| 139 | compatible = "atmel,at91rm9200-clk-pll"; |
| 140 | #clock-cells = <0>; |
| 141 | interrupts-extended = <&pmc AT91_PMC_LOCKA>; |
| 142 | clocks = <&main>; |
| 143 | reg = <0>; |
| 144 | atmel,clk-input-range = <2000000 32000000>; |
| 145 | #atmel,pll-clk-output-range-cells = <4>; |
| 146 | atmel,pll-clk-output-ranges = <745000000 800000000 0 0 |
| 147 | 695000000 750000000 1 0 |
| 148 | 645000000 700000000 2 0 |
| 149 | 595000000 650000000 3 0 |
| 150 | 545000000 600000000 0 1 |
| 151 | 495000000 555000000 1 1 |
| 152 | 445000000 500000000 2 1 |
| 153 | 400000000 450000000 3 1>; |
| 154 | }; |
| 155 | |
| 156 | plladiv: plladivck { |
| 157 | compatible = "atmel,at91sam9x5-clk-plldiv"; |
| 158 | #clock-cells = <0>; |
| 159 | clocks = <&plla>; |
| 160 | }; |
| 161 | |
| 162 | utmi: utmick { |
| 163 | compatible = "atmel,at91sam9x5-clk-utmi"; |
| 164 | #clock-cells = <0>; |
| 165 | interrupts-extended = <&pmc AT91_PMC_LOCKU>; |
| 166 | clocks = <&main>; |
| 167 | }; |
| 168 | |
| 169 | mck: masterck { |
| 170 | compatible = "atmel,at91rm9200-clk-master"; |
| 171 | #clock-cells = <0>; |
| 172 | interrupts-extended = <&pmc AT91_PMC_MCKRDY>; |
| 173 | clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; |
| 174 | atmel,clk-output-range = <0 133333333>; |
| 175 | atmel,clk-divisors = <1 2 4 3>; |
| 176 | }; |
| 177 | |
| 178 | usb: usbck { |
| 179 | compatible = "atmel,at91sam9x5-clk-usb"; |
| 180 | #clock-cells = <0>; |
| 181 | clocks = <&plladiv>, <&utmi>; |
| 182 | }; |
| 183 | |
| 184 | prog: progck { |
| 185 | compatible = "atmel,at91sam9g45-clk-programmable"; |
| 186 | #address-cells = <1>; |
| 187 | #size-cells = <0>; |
| 188 | interrupt-parent = <&pmc>; |
| 189 | clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; |
| 190 | |
| 191 | prog0: prog0 { |
| 192 | #clock-cells = <0>; |
| 193 | reg = <0>; |
| 194 | interrupts = <AT91_PMC_PCKRDY(0)>; |
| 195 | }; |
| 196 | |
| 197 | prog1: prog1 { |
| 198 | #clock-cells = <0>; |
| 199 | reg = <1>; |
| 200 | interrupts = <AT91_PMC_PCKRDY(1)>; |
| 201 | }; |
| 202 | }; |
| 203 | |
| 204 | systemck { |
| 205 | compatible = "atmel,at91rm9200-clk-system"; |
| 206 | #address-cells = <1>; |
| 207 | #size-cells = <0>; |
| 208 | |
| 209 | ddrck: ddrck { |
| 210 | #clock-cells = <0>; |
| 211 | reg = <2>; |
| 212 | clocks = <&mck>; |
| 213 | }; |
| 214 | |
| 215 | uhpck: uhpck { |
| 216 | #clock-cells = <0>; |
| 217 | reg = <6>; |
| 218 | clocks = <&usb>; |
| 219 | }; |
| 220 | |
| 221 | pck0: pck0 { |
| 222 | #clock-cells = <0>; |
| 223 | reg = <8>; |
| 224 | clocks = <&prog0>; |
| 225 | }; |
| 226 | |
| 227 | pck1: pck1 { |
| 228 | #clock-cells = <0>; |
| 229 | reg = <9>; |
| 230 | clocks = <&prog1>; |
| 231 | }; |
| 232 | }; |
| 233 | |
| 234 | periphck { |
| 235 | compatible = "atmel,at91rm9200-clk-peripheral"; |
| 236 | #address-cells = <1>; |
| 237 | #size-cells = <0>; |
| 238 | clocks = <&mck>; |
| 239 | |
| 240 | pioA_clk: pioA_clk { |
| 241 | #clock-cells = <0>; |
| 242 | reg = <2>; |
| 243 | }; |
| 244 | |
| 245 | pioB_clk: pioB_clk { |
| 246 | #clock-cells = <0>; |
| 247 | reg = <3>; |
| 248 | }; |
| 249 | |
| 250 | pioC_clk: pioC_clk { |
| 251 | #clock-cells = <0>; |
| 252 | reg = <4>; |
| 253 | }; |
| 254 | |
| 255 | pioDE_clk: pioDE_clk { |
| 256 | #clock-cells = <0>; |
| 257 | reg = <5>; |
| 258 | }; |
| 259 | |
| 260 | trng_clk: trng_clk { |
| 261 | #clock-cells = <0>; |
| 262 | reg = <6>; |
| 263 | }; |
| 264 | |
| 265 | usart0_clk: usart0_clk { |
| 266 | #clock-cells = <0>; |
| 267 | reg = <7>; |
| 268 | }; |
| 269 | |
| 270 | usart1_clk: usart1_clk { |
| 271 | #clock-cells = <0>; |
| 272 | reg = <8>; |
| 273 | }; |
| 274 | |
| 275 | usart2_clk: usart2_clk { |
| 276 | #clock-cells = <0>; |
| 277 | reg = <9>; |
| 278 | }; |
| 279 | |
| 280 | usart3_clk: usart3_clk { |
| 281 | #clock-cells = <0>; |
| 282 | reg = <10>; |
| 283 | }; |
| 284 | |
| 285 | mci0_clk: mci0_clk { |
| 286 | #clock-cells = <0>; |
| 287 | reg = <11>; |
| 288 | }; |
| 289 | |
| 290 | twi0_clk: twi0_clk { |
| 291 | #clock-cells = <0>; |
| 292 | reg = <12>; |
| 293 | }; |
| 294 | |
| 295 | twi1_clk: twi1_clk { |
| 296 | #clock-cells = <0>; |
| 297 | reg = <13>; |
| 298 | }; |
| 299 | |
| 300 | spi0_clk: spi0_clk { |
| 301 | #clock-cells = <0>; |
| 302 | reg = <14>; |
| 303 | }; |
| 304 | |
| 305 | spi1_clk: spi1_clk { |
| 306 | #clock-cells = <0>; |
| 307 | reg = <15>; |
| 308 | }; |
| 309 | |
| 310 | ssc0_clk: ssc0_clk { |
| 311 | #clock-cells = <0>; |
| 312 | reg = <16>; |
| 313 | }; |
| 314 | |
| 315 | ssc1_clk: ssc1_clk { |
| 316 | #clock-cells = <0>; |
| 317 | reg = <17>; |
| 318 | }; |
| 319 | |
| 320 | tcb0_clk: tcb0_clk { |
| 321 | #clock-cells = <0>; |
| 322 | reg = <18>; |
| 323 | }; |
| 324 | |
| 325 | pwm_clk: pwm_clk { |
| 326 | #clock-cells = <0>; |
| 327 | reg = <19>; |
| 328 | }; |
| 329 | |
| 330 | adc_clk: adc_clk { |
| 331 | #clock-cells = <0>; |
| 332 | reg = <20>; |
| 333 | }; |
| 334 | |
| 335 | dma0_clk: dma0_clk { |
| 336 | #clock-cells = <0>; |
| 337 | reg = <21>; |
| 338 | }; |
| 339 | |
| 340 | uhphs_clk: uhphs_clk { |
| 341 | #clock-cells = <0>; |
| 342 | reg = <22>; |
| 343 | }; |
| 344 | |
| 345 | lcd_clk: lcd_clk { |
| 346 | #clock-cells = <0>; |
| 347 | reg = <23>; |
| 348 | }; |
| 349 | |
| 350 | ac97_clk: ac97_clk { |
| 351 | #clock-cells = <0>; |
| 352 | reg = <24>; |
| 353 | }; |
| 354 | |
| 355 | macb0_clk: macb0_clk { |
| 356 | #clock-cells = <0>; |
| 357 | reg = <25>; |
| 358 | }; |
| 359 | |
| 360 | isi_clk: isi_clk { |
| 361 | #clock-cells = <0>; |
| 362 | reg = <26>; |
| 363 | }; |
| 364 | |
| 365 | udphs_clk: udphs_clk { |
| 366 | #clock-cells = <0>; |
| 367 | reg = <27>; |
| 368 | }; |
| 369 | |
| 370 | aestdessha_clk: aestdessha_clk { |
| 371 | #clock-cells = <0>; |
| 372 | reg = <28>; |
| 373 | }; |
| 374 | |
| 375 | mci1_clk: mci1_clk { |
| 376 | #clock-cells = <0>; |
| 377 | reg = <29>; |
| 378 | }; |
| 379 | |
| 380 | vdec_clk: vdec_clk { |
| 381 | #clock-cells = <0>; |
| 382 | reg = <30>; |
| 383 | }; |
| 384 | }; |
| 385 | }; |
| 386 | |
| 387 | rstc@fffffd00 { |
| 388 | compatible = "atmel,at91sam9g45-rstc"; |
| 389 | reg = <0xfffffd00 0x10>; |
| 390 | clocks = <&clk32k>; |
| 391 | }; |
| 392 | |
| 393 | pit: timer@fffffd30 { |
| 394 | compatible = "atmel,at91sam9260-pit"; |
| 395 | reg = <0xfffffd30 0xf>; |
| 396 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 397 | clocks = <&mck>; |
| 398 | }; |
| 399 | |
| 400 | |
| 401 | shdwc@fffffd10 { |
| 402 | compatible = "atmel,at91sam9rl-shdwc"; |
| 403 | reg = <0xfffffd10 0x10>; |
| 404 | clocks = <&clk32k>; |
| 405 | }; |
| 406 | |
| 407 | tcb0: timer@fff7c000 { |
| 408 | compatible = "atmel,at91rm9200-tcb"; |
| 409 | reg = <0xfff7c000 0x100>; |
| 410 | interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; |
| 411 | clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; |
| 412 | clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| 413 | }; |
| 414 | |
| 415 | tcb1: timer@fffd4000 { |
| 416 | compatible = "atmel,at91rm9200-tcb"; |
| 417 | reg = <0xfffd4000 0x100>; |
| 418 | interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; |
| 419 | clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; |
| 420 | clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| 421 | }; |
| 422 | |
| 423 | dma: dma-controller@ffffec00 { |
| 424 | compatible = "atmel,at91sam9g45-dma"; |
| 425 | reg = <0xffffec00 0x200>; |
| 426 | interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; |
| 427 | #dma-cells = <2>; |
| 428 | clocks = <&dma0_clk>; |
| 429 | clock-names = "dma_clk"; |
| 430 | }; |
| 431 | |
| 432 | pinctrl@fffff200 { |
| 433 | #address-cells = <1>; |
| 434 | #size-cells = <1>; |
| 435 | compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; |
| 436 | ranges = <0xfffff200 0xfffff200 0xa00>; |
| 437 | |
| 438 | atmel,mux-mask = < |
| 439 | /* A B */ |
| 440 | 0xffffffff 0xffc003ff /* pioA */ |
| 441 | 0xffffffff 0x800f8f00 /* pioB */ |
| 442 | 0xffffffff 0x00000e00 /* pioC */ |
| 443 | 0xffffffff 0xff0c1381 /* pioD */ |
| 444 | 0xffffffff 0x81ffff81 /* pioE */ |
| 445 | >; |
| 446 | |
| 447 | /* shared pinctrl settings */ |
| 448 | adc0 { |
| 449 | pinctrl_adc0_adtrg: adc0_adtrg { |
| 450 | atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 451 | }; |
| 452 | pinctrl_adc0_ad0: adc0_ad0 { |
| 453 | atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 454 | }; |
| 455 | pinctrl_adc0_ad1: adc0_ad1 { |
| 456 | atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 457 | }; |
| 458 | pinctrl_adc0_ad2: adc0_ad2 { |
| 459 | atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 460 | }; |
| 461 | pinctrl_adc0_ad3: adc0_ad3 { |
| 462 | atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 463 | }; |
| 464 | pinctrl_adc0_ad4: adc0_ad4 { |
| 465 | atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 466 | }; |
| 467 | pinctrl_adc0_ad5: adc0_ad5 { |
| 468 | atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 469 | }; |
| 470 | pinctrl_adc0_ad6: adc0_ad6 { |
| 471 | atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 472 | }; |
| 473 | pinctrl_adc0_ad7: adc0_ad7 { |
| 474 | atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 475 | }; |
| 476 | }; |
| 477 | |
| 478 | dbgu { |
| 479 | pinctrl_dbgu: dbgu-0 { |
| 480 | atmel,pins = |
| 481 | <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ |
| 482 | AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ |
| 483 | }; |
| 484 | }; |
| 485 | |
| 486 | i2c0 { |
| 487 | pinctrl_i2c0: i2c0-0 { |
| 488 | atmel,pins = |
| 489 | <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA21 periph A TWCK0 */ |
| 490 | AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */ |
| 491 | }; |
| 492 | }; |
| 493 | |
| 494 | i2c1 { |
| 495 | pinctrl_i2c1: i2c1-0 { |
| 496 | atmel,pins = |
| 497 | <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A TWCK1 */ |
| 498 | AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */ |
| 499 | }; |
| 500 | }; |
| 501 | |
| 502 | isi { |
| 503 | pinctrl_isi_data_0_7: isi-0-data-0-7 { |
| 504 | atmel,pins = |
| 505 | <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */ |
| 506 | AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */ |
| 507 | AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */ |
| 508 | AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */ |
| 509 | AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */ |
| 510 | AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */ |
| 511 | AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */ |
| 512 | AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */ |
| 513 | AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */ |
| 514 | AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */ |
| 515 | AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */ |
| 516 | }; |
| 517 | |
| 518 | pinctrl_isi_data_8_9: isi-0-data-8-9 { |
| 519 | atmel,pins = |
| 520 | <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */ |
| 521 | AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */ |
| 522 | }; |
| 523 | |
| 524 | pinctrl_isi_data_10_11: isi-0-data-10-11 { |
| 525 | atmel,pins = |
| 526 | <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */ |
| 527 | AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */ |
| 528 | }; |
| 529 | }; |
| 530 | |
| 531 | usart0 { |
| 532 | pinctrl_usart0: usart0-0 { |
| 533 | atmel,pins = |
| 534 | <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ |
| 535 | AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ |
| 536 | }; |
| 537 | |
| 538 | pinctrl_usart0_rts: usart0_rts-0 { |
| 539 | atmel,pins = |
| 540 | <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ |
| 541 | }; |
| 542 | |
| 543 | pinctrl_usart0_cts: usart0_cts-0 { |
| 544 | atmel,pins = |
| 545 | <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ |
| 546 | }; |
| 547 | }; |
| 548 | |
| 549 | uart1 { |
| 550 | pinctrl_usart1: usart1-0 { |
| 551 | atmel,pins = |
| 552 | <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ |
| 553 | AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ |
| 554 | }; |
| 555 | |
| 556 | pinctrl_usart1_rts: usart1_rts-0 { |
| 557 | atmel,pins = |
| 558 | <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ |
| 559 | }; |
| 560 | |
| 561 | pinctrl_usart1_cts: usart1_cts-0 { |
| 562 | atmel,pins = |
| 563 | <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ |
| 564 | }; |
| 565 | }; |
| 566 | |
| 567 | usart2 { |
| 568 | pinctrl_usart2: usart2-0 { |
| 569 | atmel,pins = |
| 570 | <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ |
| 571 | AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ |
| 572 | }; |
| 573 | |
| 574 | pinctrl_usart2_rts: usart2_rts-0 { |
| 575 | atmel,pins = |
| 576 | <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ |
| 577 | }; |
| 578 | |
| 579 | pinctrl_usart2_cts: usart2_cts-0 { |
| 580 | atmel,pins = |
| 581 | <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ |
| 582 | }; |
| 583 | }; |
| 584 | |
| 585 | usart3 { |
| 586 | pinctrl_usart3: usart3-0 { |
| 587 | atmel,pins = |
| 588 | <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ |
| 589 | AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ |
| 590 | }; |
| 591 | |
| 592 | pinctrl_usart3_rts: usart3_rts-0 { |
| 593 | atmel,pins = |
| 594 | <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ |
| 595 | }; |
| 596 | |
| 597 | pinctrl_usart3_cts: usart3_cts-0 { |
| 598 | atmel,pins = |
| 599 | <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ |
| 600 | }; |
| 601 | }; |
| 602 | |
| 603 | nand { |
| 604 | pinctrl_nand: nand-0 { |
| 605 | atmel,pins = |
| 606 | <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ |
| 607 | AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ |
| 608 | }; |
| 609 | }; |
| 610 | |
| 611 | macb { |
| 612 | pinctrl_macb_rmii: macb_rmii-0 { |
| 613 | atmel,pins = |
| 614 | <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ |
| 615 | AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ |
| 616 | AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ |
| 617 | AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ |
| 618 | AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ |
| 619 | AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ |
| 620 | AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ |
| 621 | AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ |
| 622 | AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ |
| 623 | AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ |
| 624 | }; |
| 625 | |
| 626 | pinctrl_macb_rmii_mii: macb_rmii_mii-0 { |
| 627 | atmel,pins = |
| 628 | <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ |
| 629 | AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ |
| 630 | AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ |
| 631 | AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ |
| 632 | AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ |
| 633 | AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ |
| 634 | AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ |
| 635 | AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ |
| 636 | }; |
| 637 | }; |
| 638 | |
| 639 | mmc0 { |
| 640 | pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { |
| 641 | atmel,pins = |
| 642 | <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ |
| 643 | AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ |
| 644 | AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ |
| 645 | }; |
| 646 | |
| 647 | pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { |
| 648 | atmel,pins = |
| 649 | <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ |
| 650 | AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ |
| 651 | AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ |
| 652 | }; |
| 653 | |
| 654 | pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { |
| 655 | atmel,pins = |
| 656 | <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ |
| 657 | AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ |
| 658 | AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ |
| 659 | AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ |
| 660 | }; |
| 661 | }; |
| 662 | |
| 663 | mmc1 { |
| 664 | pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { |
| 665 | atmel,pins = |
| 666 | <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ |
| 667 | AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ |
| 668 | AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ |
| 669 | }; |
| 670 | |
| 671 | pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { |
| 672 | atmel,pins = |
| 673 | <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ |
| 674 | AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ |
| 675 | AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ |
| 676 | }; |
| 677 | |
| 678 | pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { |
| 679 | atmel,pins = |
| 680 | <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ |
| 681 | AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ |
| 682 | AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ |
| 683 | AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ |
| 684 | }; |
| 685 | }; |
| 686 | |
| 687 | ssc0 { |
| 688 | pinctrl_ssc0_tx: ssc0_tx-0 { |
| 689 | atmel,pins = |
| 690 | <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ |
| 691 | AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ |
| 692 | AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ |
| 693 | }; |
| 694 | |
| 695 | pinctrl_ssc0_rx: ssc0_rx-0 { |
| 696 | atmel,pins = |
| 697 | <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ |
| 698 | AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ |
| 699 | AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ |
| 700 | }; |
| 701 | }; |
| 702 | |
| 703 | ssc1 { |
| 704 | pinctrl_ssc1_tx: ssc1_tx-0 { |
| 705 | atmel,pins = |
| 706 | <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ |
| 707 | AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ |
| 708 | AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ |
| 709 | }; |
| 710 | |
| 711 | pinctrl_ssc1_rx: ssc1_rx-0 { |
| 712 | atmel,pins = |
| 713 | <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ |
| 714 | AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ |
| 715 | AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ |
| 716 | }; |
| 717 | }; |
| 718 | |
| 719 | spi0 { |
| 720 | pinctrl_spi0: spi0-0 { |
| 721 | atmel,pins = |
| 722 | <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ |
| 723 | AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ |
| 724 | AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ |
| 725 | }; |
| 726 | }; |
| 727 | |
| 728 | spi1 { |
| 729 | pinctrl_spi1: spi1-0 { |
| 730 | atmel,pins = |
| 731 | <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ |
| 732 | AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ |
| 733 | AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ |
| 734 | }; |
| 735 | }; |
| 736 | |
| 737 | tcb0 { |
| 738 | pinctrl_tcb0_tclk0: tcb0_tclk0-0 { |
| 739 | atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 740 | }; |
| 741 | |
| 742 | pinctrl_tcb0_tclk1: tcb0_tclk1-0 { |
| 743 | atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 744 | }; |
| 745 | |
| 746 | pinctrl_tcb0_tclk2: tcb0_tclk2-0 { |
| 747 | atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 748 | }; |
| 749 | |
| 750 | pinctrl_tcb0_tioa0: tcb0_tioa0-0 { |
| 751 | atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 752 | }; |
| 753 | |
| 754 | pinctrl_tcb0_tioa1: tcb0_tioa1-0 { |
| 755 | atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 756 | }; |
| 757 | |
| 758 | pinctrl_tcb0_tioa2: tcb0_tioa2-0 { |
| 759 | atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 760 | }; |
| 761 | |
| 762 | pinctrl_tcb0_tiob0: tcb0_tiob0-0 { |
| 763 | atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 764 | }; |
| 765 | |
| 766 | pinctrl_tcb0_tiob1: tcb0_tiob1-0 { |
| 767 | atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 768 | }; |
| 769 | |
| 770 | pinctrl_tcb0_tiob2: tcb0_tiob2-0 { |
| 771 | atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 772 | }; |
| 773 | }; |
| 774 | |
| 775 | tcb1 { |
| 776 | pinctrl_tcb1_tclk0: tcb1_tclk0-0 { |
| 777 | atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 778 | }; |
| 779 | |
| 780 | pinctrl_tcb1_tclk1: tcb1_tclk1-0 { |
| 781 | atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 782 | }; |
| 783 | |
| 784 | pinctrl_tcb1_tclk2: tcb1_tclk2-0 { |
| 785 | atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 786 | }; |
| 787 | |
| 788 | pinctrl_tcb1_tioa0: tcb1_tioa0-0 { |
| 789 | atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 790 | }; |
| 791 | |
| 792 | pinctrl_tcb1_tioa1: tcb1_tioa1-0 { |
| 793 | atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 794 | }; |
| 795 | |
| 796 | pinctrl_tcb1_tioa2: tcb1_tioa2-0 { |
| 797 | atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 798 | }; |
| 799 | |
| 800 | pinctrl_tcb1_tiob0: tcb1_tiob0-0 { |
| 801 | atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 802 | }; |
| 803 | |
| 804 | pinctrl_tcb1_tiob1: tcb1_tiob1-0 { |
| 805 | atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 806 | }; |
| 807 | |
| 808 | pinctrl_tcb1_tiob2: tcb1_tiob2-0 { |
| 809 | atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 810 | }; |
| 811 | }; |
| 812 | |
| 813 | fb { |
| 814 | pinctrl_fb: fb-0 { |
| 815 | atmel,pins = |
| 816 | <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE0 periph A */ |
| 817 | AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE2 periph A */ |
| 818 | AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE3 periph A */ |
| 819 | AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE4 periph A */ |
| 820 | AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE5 periph A */ |
| 821 | AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE6 periph A */ |
| 822 | AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE7 periph A */ |
| 823 | AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE8 periph A */ |
| 824 | AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE9 periph A */ |
| 825 | AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE10 periph A */ |
| 826 | AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE11 periph A */ |
| 827 | AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE12 periph A */ |
| 828 | AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE13 periph A */ |
| 829 | AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE14 periph A */ |
| 830 | AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE15 periph A */ |
| 831 | AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE16 periph A */ |
| 832 | AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE17 periph A */ |
| 833 | AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE18 periph A */ |
| 834 | AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE19 periph A */ |
| 835 | AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE20 periph A */ |
| 836 | AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ |
| 837 | AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE22 periph A */ |
| 838 | AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ |
| 839 | AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ |
| 840 | AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ |
| 841 | AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ |
| 842 | AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ |
| 843 | AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ |
| 844 | AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ |
| 845 | AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ |
| 846 | }; |
| 847 | }; |
| 848 | |
| 849 | pioA: gpio@fffff200 { |
| 850 | compatible = "atmel,at91rm9200-gpio"; |
| 851 | reg = <0xfffff200 0x200>; |
| 852 | interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| 853 | #gpio-cells = <2>; |
| 854 | gpio-controller; |
| 855 | interrupt-controller; |
| 856 | #interrupt-cells = <2>; |
| 857 | clocks = <&pioA_clk>; |
| 858 | }; |
| 859 | |
| 860 | pioB: gpio@fffff400 { |
| 861 | compatible = "atmel,at91rm9200-gpio"; |
| 862 | reg = <0xfffff400 0x200>; |
| 863 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| 864 | #gpio-cells = <2>; |
| 865 | gpio-controller; |
| 866 | interrupt-controller; |
| 867 | #interrupt-cells = <2>; |
| 868 | clocks = <&pioB_clk>; |
| 869 | }; |
| 870 | |
| 871 | pioC: gpio@fffff600 { |
| 872 | compatible = "atmel,at91rm9200-gpio"; |
| 873 | reg = <0xfffff600 0x200>; |
| 874 | interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| 875 | #gpio-cells = <2>; |
| 876 | gpio-controller; |
| 877 | interrupt-controller; |
| 878 | #interrupt-cells = <2>; |
| 879 | clocks = <&pioC_clk>; |
| 880 | }; |
| 881 | |
| 882 | pioD: gpio@fffff800 { |
| 883 | compatible = "atmel,at91rm9200-gpio"; |
| 884 | reg = <0xfffff800 0x200>; |
| 885 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; |
| 886 | #gpio-cells = <2>; |
| 887 | gpio-controller; |
| 888 | interrupt-controller; |
| 889 | #interrupt-cells = <2>; |
| 890 | clocks = <&pioDE_clk>; |
| 891 | }; |
| 892 | |
| 893 | pioE: gpio@fffffa00 { |
| 894 | compatible = "atmel,at91rm9200-gpio"; |
| 895 | reg = <0xfffffa00 0x200>; |
| 896 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; |
| 897 | #gpio-cells = <2>; |
| 898 | gpio-controller; |
| 899 | interrupt-controller; |
| 900 | #interrupt-cells = <2>; |
| 901 | clocks = <&pioDE_clk>; |
| 902 | }; |
| 903 | }; |
| 904 | |
| 905 | dbgu: serial@ffffee00 { |
| 906 | compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| 907 | reg = <0xffffee00 0x200>; |
| 908 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 909 | pinctrl-names = "default"; |
| 910 | pinctrl-0 = <&pinctrl_dbgu>; |
| 911 | clocks = <&mck>; |
| 912 | clock-names = "usart"; |
| 913 | status = "disabled"; |
| 914 | }; |
| 915 | |
| 916 | usart0: serial@fff8c000 { |
| 917 | compatible = "atmel,at91sam9260-usart"; |
| 918 | reg = <0xfff8c000 0x200>; |
| 919 | interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; |
| 920 | atmel,use-dma-rx; |
| 921 | atmel,use-dma-tx; |
| 922 | pinctrl-names = "default"; |
| 923 | pinctrl-0 = <&pinctrl_usart0>; |
| 924 | clocks = <&usart0_clk>; |
| 925 | clock-names = "usart"; |
| 926 | status = "disabled"; |
| 927 | }; |
| 928 | |
| 929 | usart1: serial@fff90000 { |
| 930 | compatible = "atmel,at91sam9260-usart"; |
| 931 | reg = <0xfff90000 0x200>; |
| 932 | interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; |
| 933 | atmel,use-dma-rx; |
| 934 | atmel,use-dma-tx; |
| 935 | pinctrl-names = "default"; |
| 936 | pinctrl-0 = <&pinctrl_usart1>; |
| 937 | clocks = <&usart1_clk>; |
| 938 | clock-names = "usart"; |
| 939 | status = "disabled"; |
| 940 | }; |
| 941 | |
| 942 | usart2: serial@fff94000 { |
| 943 | compatible = "atmel,at91sam9260-usart"; |
| 944 | reg = <0xfff94000 0x200>; |
| 945 | interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; |
| 946 | atmel,use-dma-rx; |
| 947 | atmel,use-dma-tx; |
| 948 | pinctrl-names = "default"; |
| 949 | pinctrl-0 = <&pinctrl_usart2>; |
| 950 | clocks = <&usart2_clk>; |
| 951 | clock-names = "usart"; |
| 952 | status = "disabled"; |
| 953 | }; |
| 954 | |
| 955 | usart3: serial@fff98000 { |
| 956 | compatible = "atmel,at91sam9260-usart"; |
| 957 | reg = <0xfff98000 0x200>; |
| 958 | interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; |
| 959 | atmel,use-dma-rx; |
| 960 | atmel,use-dma-tx; |
| 961 | pinctrl-names = "default"; |
| 962 | pinctrl-0 = <&pinctrl_usart3>; |
| 963 | clocks = <&usart3_clk>; |
| 964 | clock-names = "usart"; |
| 965 | status = "disabled"; |
| 966 | }; |
| 967 | |
| 968 | macb0: ethernet@fffbc000 { |
| 969 | compatible = "cdns,at91sam9260-macb", "cdns,macb"; |
| 970 | reg = <0xfffbc000 0x100>; |
| 971 | interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; |
| 972 | pinctrl-names = "default"; |
| 973 | pinctrl-0 = <&pinctrl_macb_rmii>; |
| 974 | clocks = <&macb0_clk>, <&macb0_clk>; |
| 975 | clock-names = "hclk", "pclk"; |
| 976 | status = "disabled"; |
| 977 | }; |
| 978 | |
| 979 | trng@fffcc000 { |
| 980 | compatible = "atmel,at91sam9g45-trng"; |
| 981 | reg = <0xfffcc000 0x4000>; |
| 982 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; |
| 983 | clocks = <&trng_clk>; |
| 984 | }; |
| 985 | |
| 986 | i2c0: i2c@fff84000 { |
| 987 | compatible = "atmel,at91sam9g10-i2c"; |
| 988 | reg = <0xfff84000 0x100>; |
| 989 | interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; |
| 990 | pinctrl-names = "default"; |
| 991 | pinctrl-0 = <&pinctrl_i2c0>; |
| 992 | #address-cells = <1>; |
| 993 | #size-cells = <0>; |
| 994 | clocks = <&twi0_clk>; |
| 995 | status = "disabled"; |
| 996 | }; |
| 997 | |
| 998 | i2c1: i2c@fff88000 { |
| 999 | compatible = "atmel,at91sam9g10-i2c"; |
| 1000 | reg = <0xfff88000 0x100>; |
| 1001 | interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; |
| 1002 | pinctrl-names = "default"; |
| 1003 | pinctrl-0 = <&pinctrl_i2c1>; |
| 1004 | #address-cells = <1>; |
| 1005 | #size-cells = <0>; |
| 1006 | clocks = <&twi1_clk>; |
| 1007 | status = "disabled"; |
| 1008 | }; |
| 1009 | |
| 1010 | ssc0: ssc@fff9c000 { |
| 1011 | compatible = "atmel,at91sam9g45-ssc"; |
| 1012 | reg = <0xfff9c000 0x4000>; |
| 1013 | interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1014 | pinctrl-names = "default"; |
| 1015 | pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| 1016 | clocks = <&ssc0_clk>; |
| 1017 | clock-names = "pclk"; |
| 1018 | status = "disabled"; |
| 1019 | }; |
| 1020 | |
| 1021 | ssc1: ssc@fffa0000 { |
| 1022 | compatible = "atmel,at91sam9g45-ssc"; |
| 1023 | reg = <0xfffa0000 0x4000>; |
| 1024 | interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1025 | pinctrl-names = "default"; |
| 1026 | pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; |
| 1027 | clocks = <&ssc1_clk>; |
| 1028 | clock-names = "pclk"; |
| 1029 | status = "disabled"; |
| 1030 | }; |
| 1031 | |
| 1032 | adc0: adc@fffb0000 { |
| 1033 | #address-cells = <1>; |
| 1034 | #size-cells = <0>; |
| 1035 | compatible = "atmel,at91sam9g45-adc"; |
| 1036 | reg = <0xfffb0000 0x100>; |
| 1037 | interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1038 | clocks = <&adc_clk>, <&adc_op_clk>; |
| 1039 | clock-names = "adc_clk", "adc_op_clk"; |
| 1040 | atmel,adc-channels-used = <0xff>; |
| 1041 | atmel,adc-vref = <3300>; |
| 1042 | atmel,adc-startup-time = <40>; |
| 1043 | atmel,adc-res = <8 10>; |
| 1044 | atmel,adc-res-names = "lowres", "highres"; |
| 1045 | atmel,adc-use-res = "highres"; |
| 1046 | |
| 1047 | trigger@0 { |
| 1048 | reg = <0>; |
| 1049 | trigger-name = "external-rising"; |
| 1050 | trigger-value = <0x1>; |
| 1051 | trigger-external; |
| 1052 | }; |
| 1053 | trigger@1 { |
| 1054 | reg = <1>; |
| 1055 | trigger-name = "external-falling"; |
| 1056 | trigger-value = <0x2>; |
| 1057 | trigger-external; |
| 1058 | }; |
| 1059 | |
| 1060 | trigger@2 { |
| 1061 | reg = <2>; |
| 1062 | trigger-name = "external-any"; |
| 1063 | trigger-value = <0x3>; |
| 1064 | trigger-external; |
| 1065 | }; |
| 1066 | |
| 1067 | trigger@3 { |
| 1068 | reg = <3>; |
| 1069 | trigger-name = "continuous"; |
| 1070 | trigger-value = <0x6>; |
| 1071 | }; |
| 1072 | }; |
| 1073 | |
| 1074 | isi@fffb4000 { |
| 1075 | compatible = "atmel,at91sam9g45-isi"; |
| 1076 | reg = <0xfffb4000 0x4000>; |
| 1077 | interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1078 | clocks = <&isi_clk>; |
| 1079 | clock-names = "isi_clk"; |
| 1080 | status = "disabled"; |
| 1081 | port { |
| 1082 | #address-cells = <1>; |
| 1083 | #size-cells = <0>; |
| 1084 | }; |
| 1085 | }; |
| 1086 | |
| 1087 | pwm0: pwm@fffb8000 { |
| 1088 | compatible = "atmel,at91sam9rl-pwm"; |
| 1089 | reg = <0xfffb8000 0x300>; |
| 1090 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; |
| 1091 | #pwm-cells = <3>; |
| 1092 | clocks = <&pwm_clk>; |
| 1093 | status = "disabled"; |
| 1094 | }; |
| 1095 | |
| 1096 | mmc0: mmc@fff80000 { |
| 1097 | compatible = "atmel,hsmci"; |
| 1098 | reg = <0xfff80000 0x600>; |
| 1099 | interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1100 | pinctrl-names = "default"; |
| 1101 | dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; |
| 1102 | dma-names = "rxtx"; |
| 1103 | #address-cells = <1>; |
| 1104 | #size-cells = <0>; |
| 1105 | clocks = <&mci0_clk>; |
| 1106 | clock-names = "mci_clk"; |
| 1107 | status = "disabled"; |
| 1108 | }; |
| 1109 | |
| 1110 | mmc1: mmc@fffd0000 { |
| 1111 | compatible = "atmel,hsmci"; |
| 1112 | reg = <0xfffd0000 0x600>; |
| 1113 | interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1114 | pinctrl-names = "default"; |
| 1115 | dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; |
| 1116 | dma-names = "rxtx"; |
| 1117 | #address-cells = <1>; |
| 1118 | #size-cells = <0>; |
| 1119 | clocks = <&mci1_clk>; |
| 1120 | clock-names = "mci_clk"; |
| 1121 | status = "disabled"; |
| 1122 | }; |
| 1123 | |
| 1124 | watchdog@fffffd40 { |
| 1125 | compatible = "atmel,at91sam9260-wdt"; |
| 1126 | reg = <0xfffffd40 0x10>; |
| 1127 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1128 | clocks = <&clk32k>; |
| 1129 | atmel,watchdog-type = "hardware"; |
| 1130 | atmel,reset-type = "all"; |
| 1131 | atmel,dbg-halt; |
| 1132 | status = "disabled"; |
| 1133 | }; |
| 1134 | |
| 1135 | spi0: spi@fffa4000 { |
| 1136 | #address-cells = <1>; |
| 1137 | #size-cells = <0>; |
| 1138 | compatible = "atmel,at91rm9200-spi"; |
| 1139 | reg = <0xfffa4000 0x200>; |
| 1140 | interrupts = <14 4 3>; |
| 1141 | pinctrl-names = "default"; |
| 1142 | pinctrl-0 = <&pinctrl_spi0>; |
| 1143 | clocks = <&spi0_clk>; |
| 1144 | clock-names = "spi_clk"; |
| 1145 | status = "disabled"; |
| 1146 | }; |
| 1147 | |
| 1148 | spi1: spi@fffa8000 { |
| 1149 | #address-cells = <1>; |
| 1150 | #size-cells = <0>; |
| 1151 | compatible = "atmel,at91rm9200-spi"; |
| 1152 | reg = <0xfffa8000 0x200>; |
| 1153 | interrupts = <15 4 3>; |
| 1154 | pinctrl-names = "default"; |
| 1155 | pinctrl-0 = <&pinctrl_spi1>; |
| 1156 | clocks = <&spi1_clk>; |
| 1157 | clock-names = "spi_clk"; |
| 1158 | status = "disabled"; |
| 1159 | }; |
| 1160 | |
| 1161 | usb2: gadget@fff78000 { |
| 1162 | #address-cells = <1>; |
| 1163 | #size-cells = <0>; |
| 1164 | compatible = "atmel,at91sam9g45-udc"; |
| 1165 | reg = <0x00600000 0x80000 |
| 1166 | 0xfff78000 0x400>; |
| 1167 | interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1168 | clocks = <&udphs_clk>, <&utmi>; |
| 1169 | clock-names = "pclk", "hclk"; |
| 1170 | status = "disabled"; |
| 1171 | |
| 1172 | ep0 { |
| 1173 | reg = <0>; |
| 1174 | atmel,fifo-size = <64>; |
| 1175 | atmel,nb-banks = <1>; |
| 1176 | }; |
| 1177 | |
| 1178 | ep1 { |
| 1179 | reg = <1>; |
| 1180 | atmel,fifo-size = <1024>; |
| 1181 | atmel,nb-banks = <2>; |
| 1182 | atmel,can-dma; |
| 1183 | atmel,can-isoc; |
| 1184 | }; |
| 1185 | |
| 1186 | ep2 { |
| 1187 | reg = <2>; |
| 1188 | atmel,fifo-size = <1024>; |
| 1189 | atmel,nb-banks = <2>; |
| 1190 | atmel,can-dma; |
| 1191 | atmel,can-isoc; |
| 1192 | }; |
| 1193 | |
| 1194 | ep3 { |
| 1195 | reg = <3>; |
| 1196 | atmel,fifo-size = <1024>; |
| 1197 | atmel,nb-banks = <3>; |
| 1198 | atmel,can-dma; |
| 1199 | }; |
| 1200 | |
| 1201 | ep4 { |
| 1202 | reg = <4>; |
| 1203 | atmel,fifo-size = <1024>; |
| 1204 | atmel,nb-banks = <3>; |
| 1205 | atmel,can-dma; |
| 1206 | }; |
| 1207 | |
| 1208 | ep5 { |
| 1209 | reg = <5>; |
| 1210 | atmel,fifo-size = <1024>; |
| 1211 | atmel,nb-banks = <3>; |
| 1212 | atmel,can-dma; |
| 1213 | atmel,can-isoc; |
| 1214 | }; |
| 1215 | |
| 1216 | ep6 { |
| 1217 | reg = <6>; |
| 1218 | atmel,fifo-size = <1024>; |
| 1219 | atmel,nb-banks = <3>; |
| 1220 | atmel,can-dma; |
| 1221 | atmel,can-isoc; |
| 1222 | }; |
| 1223 | }; |
| 1224 | |
| 1225 | sckc@fffffd50 { |
| 1226 | compatible = "atmel,at91sam9x5-sckc"; |
| 1227 | reg = <0xfffffd50 0x4>; |
| 1228 | |
| 1229 | slow_osc: slow_osc { |
| 1230 | compatible = "atmel,at91sam9x5-clk-slow-osc"; |
| 1231 | #clock-cells = <0>; |
| 1232 | atmel,startup-time-usec = <1200000>; |
| 1233 | clocks = <&slow_xtal>; |
| 1234 | }; |
| 1235 | |
| 1236 | slow_rc_osc: slow_rc_osc { |
| 1237 | compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; |
| 1238 | #clock-cells = <0>; |
| 1239 | atmel,startup-time-usec = <75>; |
| 1240 | clock-frequency = <32768>; |
| 1241 | clock-accuracy = <50000000>; |
| 1242 | }; |
| 1243 | |
| 1244 | clk32k: slck { |
| 1245 | compatible = "atmel,at91sam9x5-clk-slow"; |
| 1246 | #clock-cells = <0>; |
| 1247 | clocks = <&slow_rc_osc &slow_osc>; |
| 1248 | }; |
| 1249 | }; |
| 1250 | |
| 1251 | rtc@fffffd20 { |
| 1252 | compatible = "atmel,at91sam9260-rtt"; |
| 1253 | reg = <0xfffffd20 0x10>; |
| 1254 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1255 | clocks = <&clk32k>; |
| 1256 | status = "disabled"; |
| 1257 | }; |
| 1258 | |
| 1259 | rtc@fffffdb0 { |
| 1260 | compatible = "atmel,at91rm9200-rtc"; |
| 1261 | reg = <0xfffffdb0 0x30>; |
| 1262 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1263 | clocks = <&clk32k>; |
| 1264 | status = "disabled"; |
| 1265 | }; |
| 1266 | |
| 1267 | gpbr: syscon@fffffd60 { |
| 1268 | compatible = "atmel,at91sam9260-gpbr", "syscon"; |
| 1269 | reg = <0xfffffd60 0x10>; |
| 1270 | status = "disabled"; |
| 1271 | }; |
| 1272 | }; |
| 1273 | |
| 1274 | fb0: fb@0x00500000 { |
| 1275 | compatible = "atmel,at91sam9g45-lcdc"; |
| 1276 | reg = <0x00500000 0x1000>; |
| 1277 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; |
| 1278 | pinctrl-names = "default"; |
| 1279 | pinctrl-0 = <&pinctrl_fb>; |
| 1280 | clocks = <&lcd_clk>, <&lcd_clk>; |
| 1281 | clock-names = "hclk", "lcdc_clk"; |
| 1282 | status = "disabled"; |
| 1283 | }; |
| 1284 | |
| 1285 | nand0: nand@40000000 { |
| 1286 | compatible = "atmel,at91rm9200-nand"; |
| 1287 | #address-cells = <1>; |
| 1288 | #size-cells = <1>; |
| 1289 | reg = <0x40000000 0x10000000 |
| 1290 | 0xffffe200 0x200 |
| 1291 | >; |
| 1292 | atmel,nand-addr-offset = <21>; |
| 1293 | atmel,nand-cmd-offset = <22>; |
| 1294 | atmel,nand-has-dma; |
| 1295 | pinctrl-names = "default"; |
| 1296 | pinctrl-0 = <&pinctrl_nand>; |
| 1297 | gpios = <&pioC 8 GPIO_ACTIVE_HIGH |
| 1298 | &pioC 14 GPIO_ACTIVE_HIGH |
| 1299 | 0 |
| 1300 | >; |
| 1301 | status = "disabled"; |
| 1302 | }; |
| 1303 | |
| 1304 | usb0: ohci@00700000 { |
| 1305 | compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| 1306 | reg = <0x00700000 0x100000>; |
| 1307 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1308 | clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; |
| 1309 | clock-names = "ohci_clk", "hclk", "uhpck"; |
| 1310 | status = "disabled"; |
| 1311 | }; |
| 1312 | |
| 1313 | usb1: ehci@00800000 { |
| 1314 | compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| 1315 | reg = <0x00800000 0x100000>; |
| 1316 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1317 | clocks = <&utmi>, <&uhphs_clk>; |
| 1318 | clock-names = "usb_clk", "ehci_clk"; |
| 1319 | status = "disabled"; |
| 1320 | }; |
| 1321 | }; |
| 1322 | |
| 1323 | i2c@0 { |
| 1324 | compatible = "i2c-gpio"; |
| 1325 | gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ |
| 1326 | &pioA 21 GPIO_ACTIVE_HIGH /* scl */ |
| 1327 | >; |
| 1328 | i2c-gpio,sda-open-drain; |
| 1329 | i2c-gpio,scl-open-drain; |
| 1330 | i2c-gpio,delay-us = <5>; /* ~100 kHz */ |
| 1331 | #address-cells = <1>; |
| 1332 | #size-cells = <0>; |
| 1333 | status = "disabled"; |
| 1334 | }; |
| 1335 | }; |