Haavard Skinnemoen | d25ce7d | 2008-05-16 11:10:33 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Atmel SPI DataFlash support |
| 3 | * |
| 4 | * Copyright (C) 2008 Atmel Corporation |
| 5 | */ |
| 6 | #define DEBUG |
| 7 | #include <common.h> |
| 8 | #include <malloc.h> |
| 9 | #include <spi_flash.h> |
| 10 | |
| 11 | #include "spi_flash_internal.h" |
| 12 | |
| 13 | /* AT45-specific commands */ |
| 14 | #define CMD_AT45_READ_STATUS 0xd7 |
| 15 | #define CMD_AT45_ERASE_PAGE 0x81 |
| 16 | #define CMD_AT45_LOAD_PROG_BUF1 0x82 |
| 17 | #define CMD_AT45_LOAD_BUF1 0x84 |
| 18 | #define CMD_AT45_LOAD_PROG_BUF2 0x85 |
| 19 | #define CMD_AT45_LOAD_BUF2 0x87 |
| 20 | #define CMD_AT45_PROG_BUF1 0x88 |
| 21 | #define CMD_AT45_PROG_BUF2 0x89 |
| 22 | |
| 23 | /* AT45 status register bits */ |
| 24 | #define AT45_STATUS_P2_PAGE_SIZE (1 << 0) |
| 25 | #define AT45_STATUS_READY (1 << 7) |
| 26 | |
| 27 | /* DataFlash family IDs, as obtained from the second idcode byte */ |
| 28 | #define DF_FAMILY_AT26F 0 |
| 29 | #define DF_FAMILY_AT45 1 |
| 30 | #define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */ |
| 31 | |
| 32 | struct atmel_spi_flash_params { |
| 33 | u8 idcode1; |
| 34 | /* Log2 of page size in power-of-two mode */ |
| 35 | u8 l2_page_size; |
| 36 | u8 pages_per_block; |
| 37 | u8 blocks_per_sector; |
| 38 | u8 nr_sectors; |
| 39 | const char *name; |
| 40 | }; |
| 41 | |
| 42 | struct atmel_spi_flash { |
| 43 | const struct atmel_spi_flash_params *params; |
| 44 | struct spi_flash flash; |
| 45 | }; |
| 46 | |
| 47 | static inline struct atmel_spi_flash * |
| 48 | to_atmel_spi_flash(struct spi_flash *flash) |
| 49 | { |
| 50 | return container_of(flash, struct atmel_spi_flash, flash); |
| 51 | } |
| 52 | |
| 53 | static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { |
| 54 | { |
| 55 | .idcode1 = 0x28, |
| 56 | .l2_page_size = 10, |
| 57 | .pages_per_block = 8, |
| 58 | .blocks_per_sector = 32, |
| 59 | .nr_sectors = 32, |
| 60 | .name = "AT45DB642D", |
| 61 | }, |
| 62 | }; |
| 63 | |
| 64 | static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout) |
| 65 | { |
| 66 | struct spi_slave *spi = flash->spi; |
| 67 | unsigned long timebase; |
| 68 | int ret; |
| 69 | u8 cmd = CMD_AT45_READ_STATUS; |
| 70 | u8 status; |
| 71 | |
| 72 | timebase = get_timer(0); |
| 73 | |
| 74 | ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); |
| 75 | if (ret) |
| 76 | return -1; |
| 77 | |
| 78 | do { |
| 79 | ret = spi_xfer(spi, 8, NULL, &status, 0); |
| 80 | if (ret) |
| 81 | return -1; |
| 82 | |
| 83 | if (status & AT45_STATUS_READY) |
| 84 | break; |
| 85 | } while (get_timer(timebase) < timeout); |
| 86 | |
| 87 | /* Deactivate CS */ |
| 88 | spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); |
| 89 | |
| 90 | if (status & AT45_STATUS_READY) |
| 91 | return 0; |
| 92 | |
| 93 | /* Timed out */ |
| 94 | return -1; |
| 95 | } |
| 96 | |
| 97 | /* |
| 98 | * Assemble the address part of a command for AT45 devices in |
| 99 | * non-power-of-two page size mode. |
| 100 | */ |
| 101 | static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset) |
| 102 | { |
| 103 | unsigned long page_addr; |
| 104 | unsigned long byte_addr; |
| 105 | unsigned long page_size; |
| 106 | unsigned int page_shift; |
| 107 | |
| 108 | /* |
| 109 | * The "extra" space per page is the power-of-two page size |
| 110 | * divided by 32. |
| 111 | */ |
| 112 | page_shift = asf->params->l2_page_size; |
| 113 | page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| 114 | page_shift++; |
| 115 | page_addr = offset / page_size; |
| 116 | byte_addr = offset % page_size; |
| 117 | |
| 118 | cmd[0] = page_addr >> (16 - page_shift); |
| 119 | cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8); |
| 120 | cmd[2] = byte_addr; |
| 121 | } |
| 122 | |
| 123 | static int dataflash_read_fast_p2(struct spi_flash *flash, |
| 124 | u32 offset, size_t len, void *buf) |
| 125 | { |
| 126 | u8 cmd[5]; |
| 127 | |
| 128 | cmd[0] = CMD_READ_ARRAY_FAST; |
| 129 | cmd[1] = offset >> 16; |
| 130 | cmd[2] = offset >> 8; |
| 131 | cmd[3] = offset; |
| 132 | cmd[4] = 0x00; |
| 133 | |
| 134 | return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); |
| 135 | } |
| 136 | |
| 137 | static int dataflash_read_fast_at45(struct spi_flash *flash, |
| 138 | u32 offset, size_t len, void *buf) |
| 139 | { |
| 140 | struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| 141 | u8 cmd[5]; |
| 142 | |
| 143 | cmd[0] = CMD_READ_ARRAY_FAST; |
| 144 | at45_build_address(asf, cmd + 1, offset); |
| 145 | cmd[4] = 0x00; |
| 146 | |
| 147 | return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); |
| 148 | } |
| 149 | |
| 150 | static int dataflash_write_at45(struct spi_flash *flash, |
| 151 | u32 offset, size_t len, const void *buf) |
| 152 | { |
| 153 | struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| 154 | unsigned long page_addr; |
| 155 | unsigned long byte_addr; |
| 156 | unsigned long page_size; |
| 157 | unsigned int page_shift; |
| 158 | size_t chunk_len; |
| 159 | size_t actual; |
| 160 | int ret; |
| 161 | u8 cmd[4]; |
| 162 | |
| 163 | page_shift = asf->params->l2_page_size; |
| 164 | page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| 165 | page_shift++; |
| 166 | page_addr = offset / page_size; |
| 167 | byte_addr = offset % page_size; |
| 168 | |
| 169 | ret = spi_claim_bus(flash->spi); |
| 170 | if (ret) { |
| 171 | debug("SF: Unable to claim SPI bus\n"); |
| 172 | return ret; |
| 173 | } |
| 174 | |
| 175 | for (actual = 0; actual < len; actual += chunk_len) { |
| 176 | chunk_len = min(len - actual, page_size - byte_addr); |
| 177 | |
| 178 | /* Use the same address bits for both commands */ |
| 179 | cmd[0] = CMD_AT45_LOAD_BUF1; |
| 180 | cmd[1] = page_addr >> (16 - page_shift); |
| 181 | cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8); |
| 182 | cmd[3] = byte_addr; |
| 183 | |
| 184 | ret = spi_flash_cmd_write(flash->spi, cmd, 4, |
| 185 | buf + actual, chunk_len); |
| 186 | if (ret < 0) { |
| 187 | debug("SF: Loading AT45 buffer failed\n"); |
| 188 | goto out; |
| 189 | } |
| 190 | |
| 191 | cmd[0] = CMD_AT45_PROG_BUF1; |
| 192 | ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); |
| 193 | if (ret < 0) { |
| 194 | debug("SF: AT45 page programming failed\n"); |
| 195 | goto out; |
| 196 | } |
| 197 | |
| 198 | ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| 199 | if (ret < 0) { |
| 200 | debug("SF: AT45 page programming timed out\n"); |
| 201 | goto out; |
| 202 | } |
| 203 | |
| 204 | page_addr++; |
| 205 | byte_addr = 0; |
| 206 | } |
| 207 | |
Stefan Roese | f2302d4 | 2008-08-06 14:05:38 +0200 | [diff] [blame] | 208 | debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", |
Haavard Skinnemoen | d25ce7d | 2008-05-16 11:10:33 +0200 | [diff] [blame] | 209 | len, offset); |
| 210 | ret = 0; |
| 211 | |
| 212 | out: |
| 213 | spi_release_bus(flash->spi); |
| 214 | return ret; |
| 215 | } |
| 216 | |
| 217 | int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) |
| 218 | { |
| 219 | struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| 220 | unsigned long page_addr; |
| 221 | unsigned long page_size; |
| 222 | unsigned int page_shift; |
| 223 | size_t actual; |
| 224 | int ret; |
| 225 | u8 cmd[4]; |
| 226 | |
| 227 | /* |
| 228 | * TODO: This function currently uses page erase only. We can |
| 229 | * probably speed things up by using block and/or sector erase |
| 230 | * when possible. |
| 231 | */ |
| 232 | |
| 233 | page_shift = asf->params->l2_page_size; |
| 234 | page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| 235 | page_shift++; |
| 236 | page_addr = offset / page_size; |
| 237 | |
| 238 | if (offset % page_size || len % page_size) { |
| 239 | debug("SF: Erase offset/length not multiple of page size\n"); |
| 240 | return -1; |
| 241 | } |
| 242 | |
| 243 | cmd[0] = CMD_AT45_ERASE_PAGE; |
| 244 | cmd[3] = 0x00; |
| 245 | |
| 246 | ret = spi_claim_bus(flash->spi); |
| 247 | if (ret) { |
| 248 | debug("SF: Unable to claim SPI bus\n"); |
| 249 | return ret; |
| 250 | } |
| 251 | |
| 252 | for (actual = 0; actual < len; actual += page_size) { |
| 253 | cmd[1] = page_addr >> (16 - page_shift); |
| 254 | cmd[2] = page_addr << (page_shift - 8); |
| 255 | |
| 256 | ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); |
| 257 | if (ret < 0) { |
| 258 | debug("SF: AT45 page erase failed\n"); |
| 259 | goto out; |
| 260 | } |
| 261 | |
| 262 | ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); |
| 263 | if (ret < 0) { |
| 264 | debug("SF: AT45 page erase timed out\n"); |
| 265 | goto out; |
| 266 | } |
| 267 | |
| 268 | page_addr++; |
| 269 | } |
| 270 | |
Stefan Roese | f2302d4 | 2008-08-06 14:05:38 +0200 | [diff] [blame] | 271 | debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", |
Haavard Skinnemoen | d25ce7d | 2008-05-16 11:10:33 +0200 | [diff] [blame] | 272 | len, offset); |
| 273 | ret = 0; |
| 274 | |
| 275 | out: |
| 276 | spi_release_bus(flash->spi); |
| 277 | return ret; |
| 278 | } |
| 279 | |
| 280 | struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) |
| 281 | { |
| 282 | const struct atmel_spi_flash_params *params; |
| 283 | unsigned long page_size; |
| 284 | unsigned int family; |
| 285 | struct atmel_spi_flash *asf; |
| 286 | unsigned int i; |
| 287 | int ret; |
| 288 | u8 status; |
| 289 | |
| 290 | for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) { |
| 291 | params = &atmel_spi_flash_table[i]; |
| 292 | if (params->idcode1 == idcode[1]) |
| 293 | break; |
| 294 | } |
| 295 | |
| 296 | if (i == ARRAY_SIZE(atmel_spi_flash_table)) { |
| 297 | debug("SF: Unsupported DataFlash ID %02x\n", |
| 298 | idcode[1]); |
| 299 | return NULL; |
| 300 | } |
| 301 | |
| 302 | asf = malloc(sizeof(struct atmel_spi_flash)); |
| 303 | if (!asf) { |
| 304 | debug("SF: Failed to allocate memory\n"); |
| 305 | return NULL; |
| 306 | } |
| 307 | |
| 308 | asf->params = params; |
| 309 | asf->flash.spi = spi; |
| 310 | asf->flash.name = params->name; |
| 311 | |
| 312 | /* Assuming power-of-two page size initially. */ |
| 313 | page_size = 1 << params->l2_page_size; |
| 314 | |
| 315 | family = idcode[1] >> 5; |
| 316 | |
| 317 | switch (family) { |
| 318 | case DF_FAMILY_AT45: |
| 319 | /* |
| 320 | * AT45 chips have configurable page size. The status |
| 321 | * register indicates which configuration is active. |
| 322 | */ |
| 323 | ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1); |
| 324 | if (ret) |
| 325 | goto err; |
| 326 | |
| 327 | debug("SF: AT45 status register: %02x\n", status); |
| 328 | |
| 329 | if (!(status & AT45_STATUS_P2_PAGE_SIZE)) { |
| 330 | asf->flash.read = dataflash_read_fast_at45; |
| 331 | asf->flash.write = dataflash_write_at45; |
| 332 | asf->flash.erase = dataflash_erase_at45; |
| 333 | page_size += 1 << (params->l2_page_size - 5); |
| 334 | } else { |
| 335 | asf->flash.read = dataflash_read_fast_p2; |
| 336 | } |
| 337 | |
| 338 | break; |
| 339 | |
| 340 | case DF_FAMILY_AT26F: |
| 341 | case DF_FAMILY_AT26DF: |
| 342 | asf->flash.read = dataflash_read_fast_p2; |
| 343 | break; |
| 344 | |
| 345 | default: |
| 346 | debug("SF: Unsupported DataFlash family %u\n", family); |
| 347 | goto err; |
| 348 | } |
| 349 | |
| 350 | asf->flash.size = page_size * params->pages_per_block |
| 351 | * params->blocks_per_sector |
| 352 | * params->nr_sectors; |
| 353 | |
Stefan Roese | f2302d4 | 2008-08-06 14:05:38 +0200 | [diff] [blame] | 354 | debug("SF: Detected %s with page size %lu, total %u bytes\n", |
Haavard Skinnemoen | d25ce7d | 2008-05-16 11:10:33 +0200 | [diff] [blame] | 355 | params->name, page_size, asf->flash.size); |
| 356 | |
| 357 | return &asf->flash; |
| 358 | |
| 359 | err: |
| 360 | free(asf); |
| 361 | return NULL; |
| 362 | } |