| Michael Schwingen | bc24345 | 2008-01-16 19:51:55 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2007 |
| 3 | * Michael Schwingen, michael@schwingen.org |
| 4 | * |
| 5 | * hardware register definitions for the AcTux-3 board. |
| 6 | * |
| 7 | * See file CREDITS for list of people who contributed to this |
| 8 | * project. |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License as |
| 12 | * published by the Free Software Foundation; either version 2 of |
| 13 | * the License, or (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License |
| 21 | * along with this program; if not, write to the Free Software |
| 22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 23 | * MA 02111-1307 USA |
| 24 | */ |
| 25 | |
| 26 | #ifndef _ACTUX3_HW_H |
| 27 | #define _ACTUX3_HW_H |
| 28 | |
| 29 | /* 0 = LED off,1 = ON */ |
| 30 | #define ACTUX3_LED1_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) |
| 31 | #define ACTUX3_LED1_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) |
| 32 | #define ACTUX3_LED2_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) |
| 33 | #define ACTUX3_LED2_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) |
| 34 | #define ACTUX3_LED3_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 4) |
| 35 | #define ACTUX3_LED3_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 5) |
| 36 | #define ACTUX3_LED4_GN(a) writeb((a)^1, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) |
| 37 | #define ACTUX3_LED5_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) |
| 38 | |
| 39 | #define ACTUX3_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS |
| 40 | #define ACTUX3_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) |
| 41 | #define ACTUX3_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) |
| 42 | |
| 43 | /* GPIO settings */ |
| 44 | #define CFG_GPIO_DBGINT 0 |
| 45 | #define CFG_GPIO_ETHINT 1 |
| 46 | #define CFG_GPIO_ETHRST 2 /* Out */ |
| 47 | #define CFG_GPIO_LED5_GN 3 /* Out */ |
| 48 | #define CFG_GPIO_LED6_RT 4 /* Out */ |
| 49 | #define CFG_GPIO_LED6_GN 5 /* Out */ |
| 50 | #define CFG_GPIO_DSR 6 /* Out */ |
| 51 | #define CFG_GPIO_DCD 7 /* Out */ |
| 52 | #define CFG_GPIO_DBGJUMPER 9 |
| 53 | #define CFG_GPIO_BUTTON1 10 |
| 54 | #define CFG_GPIO_DBGSENSE 11 |
| 55 | #define CFG_GPIO_DTR 12 |
| 56 | #define CFG_GPIO_IORST 13 /* Out */ |
| 57 | #define CFG_GPIO_PCI_CLK 14 /* Out */ |
| 58 | #define CFG_GPIO_EXTBUS_CLK 15 /* Out */ |
| 59 | |
| 60 | #endif |