Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 18a952ce7f7d1059fb11bd1b479ad663a4abb6db / . / include / configs / usb_a9263.h
blob: c8cbd34cdb18559ad67e9ea4978afed0e2acde19 [file] [log] [blame]
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]1/*
2 * (C) Copyright 2007-2013
3 * Stelian Pop <stelian.pop@leadtechdesign.com>
4 * Lead Tech Design <www.leadtechdesign.com>
5 * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
6 * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
7 *
8 * Settings for Calao USB-A9263 board
9 *
10 * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
11 * installed on board will not be able to load it properly.
12 *
13 * SPDX-License-Identifier: GPL-2.0+
14 */
15
16#ifndef __CONFIG_H
17#define __CONFIG_H
18#include <asm/hardware.h>
19
20/* ARM asynchronous clock */
21#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
22#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]23
24#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
25
26#define CONFIG_ARCH_CPU_INIT
27
28#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
29#define CONFIG_SETUP_MEMORY_TAGS
30#define CONFIG_INITRD_TAG
31
32#define CONFIG_SKIP_LOWLEVEL_INIT
33
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]34/*
35 * Hardware drivers
36 */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]37/*
38 * BOOTP options
39 */
40#define CONFIG_BOOTP_BOOTFILESIZE
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]41
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]42/* SDRAM */
43#define CONFIG_NR_DRAM_BANKS 1
44#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
45#define CONFIG_SYS_SDRAM_SIZE 0x04000000
46
47#define CONFIG_SYS_INIT_SP_ADDR \
Wenyou.Yang@microchip.comfdc77182017-07-21 17:07:46 +0800[diff] [blame]48 (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]49
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]50/* NAND flash */
51#ifdef CONFIG_CMD_NAND
52#define CONFIG_NAND_ATMEL
53#define CONFIG_SYS_MAX_NAND_DEVICE 1
54#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
55/* our ALE is AD21 */
56#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
57/* our CLE is AD22 */
58#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
59#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
60#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
61#endif
62
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]63/* Ethernet */
64#define CONFIG_MACB
65#define CONFIG_RMII
66#define CONFIG_NET_RETRY_COUNT 20
67#define CONFIG_AT91_WANTS_COMMON_PHY
68
69/* USB */
70#ifdef CONFIG_CMD_USB
71#define CONFIG_USB_ATMEL
72#define CONFIG_USB_OHCI_NEW
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]73#define CONFIG_SYS_USB_OHCI_CPU_INIT
74#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
75#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
76#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]77#endif
78
79#define CONFIG_SYS_LOAD_ADDR 0x22000000
80
81#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
82#define CONFIG_SYS_MEMTEST_END 0x23e00000
83
Wenyou.Yang@microchip.comfdc77182017-07-21 17:07:46 +0800[diff] [blame]84/* bootstrap + u-boot + env + linux in dataflash on CS0 */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]85#define CONFIG_ENV_OFFSET 0x2000
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]86#define CONFIG_ENV_SIZE 0x2000
Wenyou.Yang@microchip.comfdc77182017-07-21 17:07:46 +0800[diff] [blame]87#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
88#define CONFIG_ENV_SPI_MAX_HZ 15000000
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]89#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]90#define CONFIG_EXTRA_ENV_SETTINGS \
Tom Rini43ede0b2017-10-22 17:55:07 -0400[diff] [blame]91 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]92
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]93/*
94 * Size of malloc() pool
95 */
96#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
97
98#endif