Mike Dunn | 3497d43 | 2013-06-18 11:08:51 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> |
| 3 | * |
| 4 | * This file is released under the terms of GPL v2 and any later version. |
| 5 | * See the file COPYING in the root directory of the source tree for details. |
| 6 | * |
| 7 | * |
| 8 | * This is a userspace Linux utility that, when run on the Treo 680, will |
| 9 | * program u-boot to flash. The docg4 driver *must* be loaded with the |
| 10 | * reliable_mode and ignore_badblocks parameters enabled: |
| 11 | * |
| 12 | * modprobe docg4 ignore_badblocks=1 reliable_mode=1 |
| 13 | * |
| 14 | * This utility writes the concatenated spl + u-boot image to the start of the |
| 15 | * mtd device in the format expected by the IPL/SPL. The image file and mtd |
| 16 | * device node are passed to the utility as arguments. The blocks must have |
| 17 | * been erased beforehand. |
| 18 | * |
| 19 | * When you compile this, note that it links to libmtd from mtd-utils, so ensure |
| 20 | * that your include and lib paths include this. |
| 21 | */ |
| 22 | |
| 23 | #include <stdio.h> |
| 24 | #include <stdlib.h> |
| 25 | #include <sys/stat.h> |
| 26 | #include <fcntl.h> |
| 27 | #include <string.h> |
| 28 | #include <sys/types.h> |
| 29 | #include <unistd.h> |
| 30 | #include <errno.h> |
| 31 | #include <mtd/mtd-user.h> |
| 32 | #include "libmtd.h" |
| 33 | |
| 34 | #define RELIABLE_BLOCKSIZE 0x10000 /* block capacity in reliable mode */ |
| 35 | #define STANDARD_BLOCKSIZE 0x40000 /* block capacity in normal mode */ |
| 36 | #define PAGESIZE 512 |
| 37 | #define PAGES_PER_BLOCK 512 |
| 38 | #define OOBSIZE 7 /* available to user (16 total) */ |
| 39 | |
| 40 | uint8_t ff_oob[OOBSIZE] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| 41 | |
| 42 | /* this is the magic number the IPL looks for (ASCII "BIPO") */ |
| 43 | uint8_t page0_oob[OOBSIZE] = {'B', 'I', 'P', 'O', 0xff, 0xff, 0xff}; |
| 44 | |
| 45 | int main(int argc, char * const argv[]) |
| 46 | { |
| 47 | int devfd, datafd, num_blocks, block; |
| 48 | off_t file_size; |
| 49 | libmtd_t mtd_desc; |
| 50 | struct mtd_dev_info devinfo; |
| 51 | uint8_t *blockbuf; |
| 52 | char response[8]; |
| 53 | |
| 54 | if (argc != 3) { |
| 55 | printf("usage: %s <image file> <mtd dev node>\n", argv[0]); |
| 56 | return -EINVAL; |
| 57 | } |
| 58 | |
| 59 | mtd_desc = libmtd_open(); |
| 60 | if (mtd_desc == NULL) { |
| 61 | int errsv = errno; |
| 62 | fprintf(stderr, "can't initialize libmtd\n"); |
| 63 | return -errsv; |
| 64 | } |
| 65 | |
| 66 | /* open the spl image file and mtd device */ |
| 67 | datafd = open(argv[1], O_RDONLY); |
| 68 | if (datafd == -1) { |
| 69 | int errsv = errno; |
| 70 | perror(argv[1]); |
| 71 | return -errsv; |
| 72 | } |
| 73 | devfd = open(argv[2], O_WRONLY); |
| 74 | if (devfd == -1) { |
| 75 | int errsv = errno; |
| 76 | perror(argv[2]); |
| 77 | return -errsv; |
| 78 | } |
| 79 | if (mtd_get_dev_info(mtd_desc, argv[2], &devinfo) < 0) { |
| 80 | int errsv = errno; |
| 81 | perror(argv[2]); |
| 82 | return -errsv; |
| 83 | } |
| 84 | |
| 85 | /* determine the number of blocks needed by the image */ |
| 86 | file_size = lseek(datafd, 0, SEEK_END); |
| 87 | if (file_size == (off_t)-1) { |
| 88 | int errsv = errno; |
| 89 | perror("lseek"); |
| 90 | return -errsv; |
| 91 | } |
| 92 | num_blocks = (file_size + RELIABLE_BLOCKSIZE - 1) / RELIABLE_BLOCKSIZE; |
| 93 | file_size = lseek(datafd, 0, SEEK_SET); |
| 94 | if (file_size == (off_t)-1) { |
| 95 | int errsv = errno; |
| 96 | perror("lseek"); |
| 97 | return -errsv; |
| 98 | } |
| 99 | printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt); |
Bin Meng | a187559 | 2016-02-05 19:30:11 -0800 | [diff] [blame] | 100 | printf("U-Boot will occupy %d blocks\n", num_blocks); |
Mike Dunn | 3497d43 | 2013-06-18 11:08:51 -0700 | [diff] [blame] | 101 | if (num_blocks > devinfo.eb_cnt) { |
| 102 | fprintf(stderr, "Insufficient blocks on partition\n"); |
| 103 | return -EINVAL; |
| 104 | } |
| 105 | |
| 106 | printf("IMPORTANT: These blocks must be in an erased state!\n"); |
| 107 | printf("Do you want to proceed?\n"); |
| 108 | scanf("%s", response); |
| 109 | if ((response[0] != 'y') && (response[0] != 'Y')) { |
| 110 | printf("Exiting\n"); |
| 111 | close(devfd); |
| 112 | close(datafd); |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | blockbuf = calloc(RELIABLE_BLOCKSIZE, 1); |
| 117 | if (blockbuf == NULL) { |
| 118 | int errsv = errno; |
| 119 | perror("calloc"); |
| 120 | return -errsv; |
| 121 | } |
| 122 | |
| 123 | for (block = 0; block < num_blocks; block++) { |
| 124 | int ofs, page; |
| 125 | uint8_t *pagebuf = blockbuf, *buf = blockbuf; |
| 126 | uint8_t *oobbuf = page0_oob; /* magic num in oob of 1st page */ |
| 127 | size_t len = RELIABLE_BLOCKSIZE; |
| 128 | int ret; |
| 129 | |
| 130 | /* read data for one block from file */ |
| 131 | while (len) { |
| 132 | ssize_t read_ret = read(datafd, buf, len); |
| 133 | if (read_ret == -1) { |
| 134 | int errsv = errno; |
| 135 | if (errno == EINTR) |
| 136 | continue; |
| 137 | perror("read"); |
| 138 | return -errsv; |
| 139 | } else if (read_ret == 0) { |
| 140 | break; /* EOF */ |
| 141 | } |
| 142 | len -= read_ret; |
| 143 | buf += read_ret; |
| 144 | } |
| 145 | |
| 146 | printf("Block %d: writing\r", block + 1); |
| 147 | fflush(stdout); |
| 148 | |
| 149 | for (page = 0, ofs = 0; |
| 150 | page < PAGES_PER_BLOCK; |
| 151 | page++, ofs += PAGESIZE) { |
| 152 | if (page & 0x04) /* Odd-numbered 2k page */ |
| 153 | continue; /* skipped in reliable mode */ |
| 154 | |
| 155 | ret = mtd_write(mtd_desc, &devinfo, devfd, block, ofs, |
| 156 | pagebuf, PAGESIZE, oobbuf, OOBSIZE, |
| 157 | MTD_OPS_PLACE_OOB); |
| 158 | if (ret) { |
| 159 | fprintf(stderr, |
| 160 | "\nmtd_write returned %d on block %d, ofs %x\n", |
| 161 | ret, block + 1, ofs); |
| 162 | return -EIO; |
| 163 | } |
| 164 | oobbuf = ff_oob; /* oob for subsequent pages */ |
| 165 | |
| 166 | if (page & 0x01) /* odd-numbered subpage */ |
| 167 | pagebuf += PAGESIZE; |
| 168 | } |
| 169 | } |
| 170 | |
| 171 | printf("\nDone\n"); |
| 172 | |
| 173 | close(devfd); |
| 174 | close(datafd); |
| 175 | free(blockbuf); |
| 176 | return 0; |
| 177 | } |