blob: d01d88b33f4d34afb65838f60d5a1e532084ec88 [file] [log] [blame]
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +01001/*
2 * (C) Copyright 2008
Ricardo Ribalda Delgado5b218ae2016-01-26 11:24:08 +01003 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +01004 * This work has been supported by: QTechnology http://qtec.com/
5 *
6 * (C) Copyright 2008
7 * Georg Schardt <schardt@team-ctech.de>
8 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010010*/
11
12#ifndef __CONFIG_XLX_H
13#define __CONFIG_XLX_H
Ricardo Ribaldad67b72d2015-05-12 16:20:29 +020014
Ricardo Ribaldad67b72d2015-05-12 16:20:29 +020015
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010016/*
17#define DEBUG
18#define ET_DEBUG
19*/
20
21/*Mem Map*/
22#define CONFIG_SYS_SDRAM_BASE 0x0
Wolfgang Denk14d0a022010-10-07 21:51:12 +020023#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010024#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
25#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
26
27/*Cmd*/
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010028#define CONFIG_CMD_ASKENV
29#define CONFIG_CMD_CACHE
30#define CONFIG_CMD_DIAG
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010031#define CONFIG_CMD_IRQ
32#define CONFIG_CMD_REGINFO
33#undef CONFIG_CMD_JFFS2
Stefan Roese68d7d652009-03-19 13:30:36 +010034#undef CONFIG_CMD_MTDPARTS
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010035#undef CONFIG_CMD_SPI
36#undef CONFIG_CMD_I2C
37#undef CONFIG_CMD_DTT
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010038#undef CONFIG_CMD_PING
39#undef CONFIG_CMD_DHCP
40#undef CONFIG_CMD_EEPROM
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010041
42/*Misc*/
43#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */
44#define CONFIG_SYS_LONGHELP /* undef to save memory */
45#if defined(CONFIG_CMD_KGDB)
46#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
47#else
48#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
49#endif
50#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
51 sizeof(CONFIG_SYS_PROMPT) + 16)
52#define CONFIG_SYS_MAXARGS 16
53 /* max number of command args */
54#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
55 /* Boot Argument Buffer Size */
56#define CONFIG_SYS_MEMTEST_START 0x00400000
57 /* memtest works on */
58#define CONFIG_SYS_MEMTEST_END 0x00C00000
59 /* 4 ... 12 MB in DRAM */
60#define CONFIG_SYS_LOAD_ADDR 0x00400000
61 /* default load address */
62#define CONFIG_SYS_EXTBDINFO 1
63 /* Extended board_into (bd_t) */
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010064 /* decrementer freq: 1 ms ticks */
65#define CONFIG_CMDLINE_EDITING /* add command line history */
66#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
67#define CONFIG_LOOPW /* enable loopw command */
68#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
69#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
70#define CONFIG_VERSION_VARIABLE /* include version env variable */
71#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
72#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010073#define CONFIG_LOADS_ECHO /* echo on for serial download */
74#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
75#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
76 /* Initial Memory map for Linux */
77
78/*Stack*/
79#define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
Wolfgang Denk553f0982010-10-26 13:32:32 +020080#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
Wolfgang Denk553f0982010-10-26 13:32:32 +020081#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +020082 - GENERATED_GBL_DATA_SIZE)
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010083#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
84/*Speed*/
85#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
86
87/*Flash*/
88#ifdef XPAR_FLASH_MEM0_BASEADDR
89#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
90#define CONFIG_SYS_FLASH_CFI 1
91#define CONFIG_FLASH_CFI_DRIVER 1
92#define CONFIG_SYS_FLASH_EMPTY_INFO 1
93#define CONFIG_SYS_MAX_FLASH_BANKS 1
94#define CONFIG_SYS_FLASH_PROTECTION
95#define CONFIG_CMD_JFFS2
Stefan Roese68d7d652009-03-19 13:30:36 +010096#define CONFIG_CMD_MTDPARTS
Stefan Roese942556a2009-05-12 14:32:58 +020097#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
98#define CONFIG_FLASH_CFI_MTD
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +010099#else
100#define CONFIG_ENV_IS_NOWHERE
101#define CONFIG_SYS_NO_FLASH
102#endif
103
Ricardo Ribalda Delgado80cce262016-01-26 11:24:19 +0100104#define CONFIG_OF_LIBFDT 1
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +0100105#define CONFIG_BAUDRATE 115200
Ricardo Ribalda Delgado80cce262016-01-26 11:24:19 +0100106/* The following table includes the supported baudrates */
107# define CONFIG_SYS_BAUDRATE_TABLE \
108 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
Ricardo Ribalda Delgadocc2dc9b2008-10-27 12:35:59 +0100109
110#endif /* __CONFIG_H */