blob: eec915330038e3b02f088f232a053dbdebc1875a [file] [log] [blame]
Asen Dimovb5d289f2010-04-20 22:49:04 +03001/*
2 * (C) Copyright 2010
3 * Ilko Iliev <iliev@ronetix.at>
4 * Asen Dimov <dimov@ronetix.at>
5 * Ronetix GmbH <www.ronetix.at>
6 *
7 * (C) Copyright 2007-2008
Stelian Popc9e798d2011-11-01 00:00:39 +01008 * Stelian Pop <stelian@popies.net>
Asen Dimovb5d289f2010-04-20 22:49:04 +03009 * Lead Tech Design <www.leadtechdesign.com>
10 *
11 * Configuation settings for the PM9G45 board.
12 *
13 * See file CREDITS for list of people who contributed to this
14 * project.
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * MA 02111-1307 USA
30 */
31
32#ifndef __CONFIG_H
33#define __CONFIG_H
34
Asen Dimoveb6e6082011-06-08 22:01:37 +000035/*
36 * SoC must be defined first, before hardware.h is included.
37 * In this case SoC is defined in boards.cfg.
38 */
39#include <asm/hardware.h>
40
Asen Dimovb5d289f2010-04-20 22:49:04 +030041#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
Asen Dimoveb6e6082011-06-08 22:01:37 +000042#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
Asen Dimovb5d289f2010-04-20 22:49:04 +030043
Asen Dimova3e09cc2011-10-31 08:54:20 +000044#define MACH_TYPE_PM9G45 2672
45#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
46
Asen Dimovb5d289f2010-04-20 22:49:04 +030047/* ARM asynchronous clock */
48#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
Asen Dimoveb6e6082011-06-08 22:01:37 +000049#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
Asen Dimovb5d289f2010-04-20 22:49:04 +030050#define CONFIG_SYS_HZ 1000
Asen Dimoveb6e6082011-06-08 22:01:37 +000051#define CONFIG_SYS_TEXT_BASE 0x73f00000
Asen Dimovb5d289f2010-04-20 22:49:04 +030052
53#define CONFIG_ARCH_CPU_INIT
54
55#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
56#define CONFIG_SETUP_MEMORY_TAGS 1
57#define CONFIG_INITRD_TAG 1
58
59#define CONFIG_SKIP_LOWLEVEL_INIT
Asen Dimovc4df2142011-12-09 11:00:07 +000060#define CONFIG_BOARD_EARLY_INIT_F
Asen Dimovb5d289f2010-04-20 22:49:04 +030061
62/*
63 * Hardware drivers
64 */
65#define CONFIG_AT91_GPIO 1
66#define CONFIG_ATMEL_USART 1
Asen Dimoveb6e6082011-06-08 22:01:37 +000067#define CONFIG_USART_BASE ATMEL_BASE_DBGU
68#define CONFIG_USART_ID ATMEL_ID_SYS
Asen Dimovb5d289f2010-04-20 22:49:04 +030069
70#define CONFIG_SYS_USE_NANDFLASH 1
71
72/* LED */
73#define CONFIG_AT91_LED
74#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */
75#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */
76
77#define CONFIG_BOOTDELAY 3
78
79/*
80 * BOOTP options
81 */
82#define CONFIG_BOOTP_BOOTFILESIZE 1
83#define CONFIG_BOOTP_BOOTPATH 1
84#define CONFIG_BOOTP_GATEWAY 1
85#define CONFIG_BOOTP_HOSTNAME 1
86
87/*
88 * Command line configuration.
89 */
90#include <config_cmd_default.h>
91#undef CONFIG_CMD_FPGA
92#undef CONFIG_CMD_IMLS
93
Asen Dimov37ee3cc2010-12-12 12:42:38 +020094#define CONFIG_CMD_CACHE
Asen Dimovb5d289f2010-04-20 22:49:04 +030095#define CONFIG_CMD_PING 1
96#define CONFIG_CMD_DHCP 1
97#define CONFIG_CMD_NAND 1
98#define CONFIG_CMD_USB 1
99
100#define CONFIG_CMD_JFFS2 1
101#define CONFIG_JFFS2_CMDLINE 1
102#define CONFIG_JFFS2_NAND 1
103#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
104#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
105#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
106
107/* SDRAM */
108#define CONFIG_NR_DRAM_BANKS 1
109#define PHYS_SDRAM 0x70000000
110#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
111
112/* NOR flash, not available */
113#define CONFIG_SYS_NO_FLASH 1
114#undef CONFIG_CMD_FLASH
115
116/* NAND flash */
117#ifdef CONFIG_CMD_NAND
118#define CONFIG_NAND_MAX_CHIPS 1
119#define CONFIG_NAND_ATMEL
120#define CONFIG_SYS_MAX_NAND_DEVICE 1
121#define CONFIG_SYS_NAND_BASE 0x40000000
122#define CONFIG_SYS_NAND_DBW_8 1
123/* our ALE is AD21 */
124#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
125/* our CLE is AD22 */
126#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
127#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
128#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
129
130#endif
131
132/* Ethernet */
133#define CONFIG_MACB 1
134#define CONFIG_RMII 1
Asen Dimovb5d289f2010-04-20 22:49:04 +0300135#define CONFIG_NET_RETRY_COUNT 20
136#define CONFIG_RESET_PHY_R 1
137
138/* USB */
139#define CONFIG_USB_ATMEL
140#define CONFIG_USB_OHCI_NEW 1
141#define CONFIG_DOS_PARTITION 1
142#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
143#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
144#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
145#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
146#define CONFIG_USB_STORAGE 1
147
148/* board specific(not enough SRAM) */
149#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
150
151#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
152
153#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
154#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
155
156/* bootstrap + u-boot + env + linux in nandflash */
157#define CONFIG_ENV_IS_IN_NAND 1
158#define CONFIG_ENV_OFFSET 0x60000
159#define CONFIG_ENV_OFFSET_REDUND 0x80000
160#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
161#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
162#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \
163 "console=ttyS0,115200 " \
164 "root=/dev/mtdblock4 " \
165 "mtdparts=atmel_nand:128k(bootstrap)ro," \
166 "256k(uboot)ro,1664k(env)," \
167 "2M(linux)ro,-(root) rw " \
168 "rootfstype=jffs2"
169
170#define CONFIG_BAUDRATE 115200
171#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
172
173#define CONFIG_SYS_PROMPT "U-Boot> "
174#define CONFIG_SYS_CBSIZE 256
175#define CONFIG_SYS_MAXARGS 16
176#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
177 sizeof(CONFIG_SYS_PROMPT) + 16)
178#define CONFIG_SYS_LONGHELP 1
179#define CONFIG_CMDLINE_EDITING 1
180#define CONFIG_AUTO_COMPLETE
181#define CONFIG_SYS_HUSH_PARSER
182#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
183
184/*
185 * Size of malloc() pool
186 */
187#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
188 0x1000)
Asen Dimovb5d289f2010-04-20 22:49:04 +0300189
Asen Dimov510f7942010-12-12 00:42:28 +0000190#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
191#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
192 GENERATED_GBL_DATA_SIZE)
193
Asen Dimovb5d289f2010-04-20 22:49:04 +0300194#define CONFIG_STACKSIZE (32*1024) /* regular stack */
195
196#ifdef CONFIG_USE_IRQ
197#error CONFIG_USE_IRQ not supported
198#endif
199
200#endif