blob: 8a448c9a41ca818e2dec0011bde92023114a7c6c [file] [log] [blame]
Andrea Sciand37c6282015-03-20 16:00:25 +01001/*
2 * Xilinx Zynq GPIO device driver
3 *
4 * Copyright (C) 2015 DAVE Embedded Systems <devel@dave.eu>
5 *
6 * Most of code taken from linux kernel driver (linux/drivers/gpio/gpio-zynq.c)
7 * Copyright (C) 2009 - 2014 Xilinx, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#include <common.h>
13#include <asm/gpio.h>
14#include <asm/io.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090015#include <linux/errno.h>
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +053016#include <dm.h>
17#include <fdtdec.h>
18
19DECLARE_GLOBAL_DATA_PTR;
20
Siva Durga Prasad Paladuguf17abca2016-03-10 16:27:42 +053021/* Maximum banks */
22#define ZYNQ_GPIO_MAX_BANK 4
23
24#define ZYNQ_GPIO_BANK0_NGPIO 32
25#define ZYNQ_GPIO_BANK1_NGPIO 22
26#define ZYNQ_GPIO_BANK2_NGPIO 32
27#define ZYNQ_GPIO_BANK3_NGPIO 32
28
29#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
30 ZYNQ_GPIO_BANK1_NGPIO + \
31 ZYNQ_GPIO_BANK2_NGPIO + \
32 ZYNQ_GPIO_BANK3_NGPIO)
33
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +053034#define ZYNQMP_GPIO_MAX_BANK 6
35
36#define ZYNQMP_GPIO_BANK0_NGPIO 26
37#define ZYNQMP_GPIO_BANK1_NGPIO 26
38#define ZYNQMP_GPIO_BANK2_NGPIO 26
39#define ZYNQMP_GPIO_BANK3_NGPIO 32
40#define ZYNQMP_GPIO_BANK4_NGPIO 32
41#define ZYNQMP_GPIO_BANK5_NGPIO 32
42
43#define ZYNQMP_GPIO_NR_GPIOS 174
44
45#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
46#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
47 ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
48#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
49#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
50 ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
51#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
52#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
53 ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
54#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
55#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
56 ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
57#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
58#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
59 ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
60#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
61#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
62 ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
Siva Durga Prasad Paladuguf17abca2016-03-10 16:27:42 +053063
64/* Register offsets for the GPIO device */
65/* LSW Mask & Data -WO */
66#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
67/* MSW Mask & Data -WO */
68#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
69/* Data Register-RW */
70#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
71/* Direction mode reg-RW */
72#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
73/* Output enable reg-RW */
74#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
75/* Interrupt mask reg-RO */
76#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
77/* Interrupt enable reg-WO */
78#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
79/* Interrupt disable reg-WO */
80#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
81/* Interrupt status reg-RO */
82#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
83/* Interrupt type reg-RW */
84#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
85/* Interrupt polarity reg-RW */
86#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
87/* Interrupt on any, reg-RW */
88#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
89
90/* Disable all interrupts mask */
91#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
92
93/* Mid pin number of a bank */
94#define ZYNQ_GPIO_MID_PIN_NUM 16
95
96/* GPIO upper 16 bit mask */
97#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
98
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +053099struct zynq_gpio_privdata {
100 phys_addr_t base;
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530101 const struct zynq_platform_data *p_data;
102};
103
104/**
105 * struct zynq_platform_data - zynq gpio platform data structure
106 * @label: string to store in gpio->label
107 * @ngpio: max number of gpio pins
108 * @max_bank: maximum number of gpio banks
109 * @bank_min: this array represents bank's min pin
110 * @bank_max: this array represents bank's max pin
111 */
112struct zynq_platform_data {
113 const char *label;
114 u16 ngpio;
115 int max_bank;
116 int bank_min[ZYNQMP_GPIO_MAX_BANK];
117 int bank_max[ZYNQMP_GPIO_MAX_BANK];
118};
119
120static const struct zynq_platform_data zynqmp_gpio_def = {
121 .label = "zynqmp_gpio",
122 .ngpio = ZYNQMP_GPIO_NR_GPIOS,
123 .max_bank = ZYNQMP_GPIO_MAX_BANK,
124 .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
125 .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
126 .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
127 .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
128 .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
129 .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
130 .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
131 .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
132 .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
133 .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
134 .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
135 .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
136};
137
138static const struct zynq_platform_data zynq_gpio_def = {
139 .label = "zynq_gpio",
140 .ngpio = ZYNQ_GPIO_NR_GPIOS,
141 .max_bank = ZYNQ_GPIO_MAX_BANK,
142 .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
143 .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
144 .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
145 .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
146 .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
147 .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
148 .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
149 .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530150};
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530151
Andrea Sciand37c6282015-03-20 16:00:25 +0100152/**
153 * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
154 * for a given pin in the GPIO device
155 * @pin_num: gpio pin number within the device
156 * @bank_num: an output parameter used to return the bank number of the gpio
157 * pin
158 * @bank_pin_num: an output parameter used to return pin number within a bank
159 * for the given gpio pin
160 *
161 * Returns the bank number and pin offset within the bank.
162 */
163static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
164 unsigned int *bank_num,
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530165 unsigned int *bank_pin_num,
166 struct udevice *dev)
Andrea Sciand37c6282015-03-20 16:00:25 +0100167{
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530168 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
169 int bank;
170
171 for (bank = 0; bank < priv->p_data->max_bank; bank++) {
172 if ((pin_num >= priv->p_data->bank_min[bank]) &&
173 (pin_num <= priv->p_data->bank_max[bank])) {
174 *bank_num = bank;
175 *bank_pin_num = pin_num -
176 priv->p_data->bank_min[bank];
177 return;
178 }
179 }
180
181 if (bank >= priv->p_data->max_bank) {
182 printf("Inavlid bank and pin num\n");
Andrea Sciand37c6282015-03-20 16:00:25 +0100183 *bank_num = 0;
184 *bank_pin_num = 0;
Andrea Sciand37c6282015-03-20 16:00:25 +0100185 }
186}
187
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530188static int gpio_is_valid(unsigned gpio, struct udevice *dev)
Andrea Sciand37c6282015-03-20 16:00:25 +0100189{
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530190 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
191
192 return (gpio >= 0) && (gpio < priv->p_data->ngpio);
Andrea Sciand37c6282015-03-20 16:00:25 +0100193}
194
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530195static int check_gpio(unsigned gpio, struct udevice *dev)
Andrea Sciand37c6282015-03-20 16:00:25 +0100196{
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530197 if (!gpio_is_valid(gpio, dev)) {
Andrea Sciand37c6282015-03-20 16:00:25 +0100198 printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
199 return -1;
200 }
201 return 0;
202}
203
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530204static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
205{
206 u32 data;
207 unsigned int bank_num, bank_pin_num;
208 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
209
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530210 if (check_gpio(gpio, dev) < 0)
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530211 return -1;
212
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530213 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530214
215 data = readl(priv->base +
216 ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
217
218 return (data >> bank_pin_num) & 1;
219}
220
221static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
222{
223 unsigned int reg_offset, bank_num, bank_pin_num;
224 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
225
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530226 if (check_gpio(gpio, dev) < 0)
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530227 return -1;
228
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530229 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530230
231 if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
232 /* only 16 data bits in bit maskable reg */
233 bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
234 reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
235 } else {
236 reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
237 }
238
239 /*
240 * get the 32 bit value to be written to the mask/data register where
241 * the upper 16 bits is the mask and lower 16 bits is the data
242 */
243 value = !!value;
244 value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
245 ((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
246
247 writel(value, priv->base + reg_offset);
248
249 return 0;
250}
251
252static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio)
253{
254 u32 reg;
255 unsigned int bank_num, bank_pin_num;
256 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
257
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530258 if (check_gpio(gpio, dev) < 0)
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530259 return -1;
260
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530261 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530262
263 /* bank 0 pins 7 and 8 are special and cannot be used as inputs */
264 if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
265 return -1;
266
267 /* clear the bit in direction mode reg to set the pin as input */
268 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
269 reg &= ~BIT(bank_pin_num);
270 writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
271
272 return 0;
273}
274
275static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
276 int value)
277{
278 u32 reg;
279 unsigned int bank_num, bank_pin_num;
280 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
281
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530282 if (check_gpio(gpio, dev) < 0)
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530283 return -1;
284
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530285 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530286
287 /* set the GPIO pin as output */
288 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
289 reg |= BIT(bank_pin_num);
290 writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
291
292 /* configure the output enable reg for the pin */
293 reg = readl(priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
294 reg |= BIT(bank_pin_num);
295 writel(reg, priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
296
297 /* set the state of the pin */
298 gpio_set_value(gpio, value);
299 return 0;
300}
301
Michal Simeka6b95872016-03-04 15:56:50 +0100302static int zynq_gpio_get_function(struct udevice *dev, unsigned offset)
303{
304 u32 reg;
305 unsigned int bank_num, bank_pin_num;
306 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
307
308 if (check_gpio(offset, dev) < 0)
309 return -1;
310
311 zynq_gpio_get_bank_pin(offset, &bank_num, &bank_pin_num, dev);
312
313 /* set the GPIO pin as output */
314 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
315 reg &= BIT(bank_pin_num);
316 if (reg)
317 return GPIOF_OUTPUT;
318 else
319 return GPIOF_INPUT;
320}
321
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530322static const struct dm_gpio_ops gpio_zynq_ops = {
323 .direction_input = zynq_gpio_direction_input,
324 .direction_output = zynq_gpio_direction_output,
325 .get_value = zynq_gpio_get_value,
326 .set_value = zynq_gpio_set_value,
Michal Simeka6b95872016-03-04 15:56:50 +0100327 .get_function = zynq_gpio_get_function,
328
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530329};
330
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530331static const struct udevice_id zynq_gpio_ids[] = {
332 { .compatible = "xlnx,zynq-gpio-1.0",
333 .data = (ulong)&zynq_gpio_def},
334 { .compatible = "xlnx,zynqmp-gpio-1.0",
335 .data = (ulong)&zynqmp_gpio_def},
336 { }
337};
338
339static void zynq_gpio_getplat_data(struct udevice *dev)
340{
341 const struct udevice_id *of_match = zynq_gpio_ids;
342 int ret;
343 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
344
345 while (of_match->compatible) {
346 ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
347 of_match->compatible);
348 if (ret >= 0) {
349 priv->p_data =
350 (struct zynq_platform_data *)of_match->data;
351 break;
352 } else {
353 of_match++;
354 continue;
355 }
356 }
357
358 if (!priv->p_data)
359 printf("No Platform data found\n");
360}
361
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530362static int zynq_gpio_probe(struct udevice *dev)
363{
364 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
Siva Durga Prasad Paladugu404a00c2016-03-10 16:27:43 +0530365 struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
366
367 zynq_gpio_getplat_data(dev);
368
369 if (priv->p_data)
370 uc_priv->gpio_count = priv->p_data->ngpio;
371
372 return 0;
373}
374
375static int zynq_gpio_ofdata_to_platdata(struct udevice *dev)
376{
377 struct zynq_gpio_privdata *priv = dev_get_priv(dev);
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530378
379 priv->base = dev_get_addr(dev);
380
381 return 0;
382}
383
Siva Durga Prasad Paladugu68c70262016-03-10 16:27:38 +0530384U_BOOT_DRIVER(gpio_zynq) = {
385 .name = "gpio_zynq",
386 .id = UCLASS_GPIO,
387 .ops = &gpio_zynq_ops,
388 .of_match = zynq_gpio_ids,
389 .ofdata_to_platdata = zynq_gpio_ofdata_to_platdata,
390 .probe = zynq_gpio_probe,
391 .priv_auto_alloc_size = sizeof(struct zynq_gpio_privdata),
392};