blob: 40b1a0e63109237f536b3eac4c0a18df12d26698 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Ashish Kumar77697762017-08-31 16:12:55 +05302/*
3 * Copyright 2017 NXP
Ashish Kumar77697762017-08-31 16:12:55 +05304 */
5
6#include <common.h>
Ashish Kumar11d5f7d2018-04-13 12:28:45 +05307#include <command.h>
Ashish Kumar77697762017-08-31 16:12:55 +05308#include <netdev.h>
9#include <asm/io.h>
10#include <asm/arch/fsl_serdes.h>
11#include <hwconfig.h>
12#include <fsl_mdio.h>
13#include <malloc.h>
Ashish Kumar11d5f7d2018-04-13 12:28:45 +053014#include <phy.h>
Ashish Kumar77697762017-08-31 16:12:55 +053015#include <fm_eth.h>
16#include <i2c.h>
17#include <miiphy.h>
Bogdan Purcareatac48deb92017-10-05 06:56:53 +000018#include <fsl-mc/fsl_mc.h>
Ashish Kumar77697762017-08-31 16:12:55 +053019#include <fsl-mc/ldpaa_wriop.h>
20
21#include "../common/qixis.h"
22
23#include "ls1088a_qixis.h"
24
Ashish Kumar77697762017-08-31 16:12:55 +053025#ifdef CONFIG_FSL_MC_ENET
26
27#define SFP_TX 0
28
29 /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
30 * Bank 1 -> Lanes A, B, C, D,
31 * Bank 2 -> Lanes A,B, C, D,
32 */
33
34 /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
35 * means that the mapping must be determined dynamically, or that the lane
36 * maps to something other than a board slot.
37 */
38
39static u8 lane_to_slot_fsm1[] = {
40 0, 0, 0, 0, 0, 0, 0, 0
41};
42
43/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
44 * housed.
45 */
46
47static int xqsgii_riser_phy_addr[] = {
48 XQSGMII_CARD_PHY1_PORT0_ADDR,
49 XQSGMII_CARD_PHY2_PORT0_ADDR,
50 XQSGMII_CARD_PHY3_PORT0_ADDR,
51 XQSGMII_CARD_PHY4_PORT0_ADDR,
52 XQSGMII_CARD_PHY3_PORT2_ADDR,
53 XQSGMII_CARD_PHY1_PORT2_ADDR,
54 XQSGMII_CARD_PHY4_PORT2_ADDR,
55 XQSGMII_CARD_PHY2_PORT2_ADDR,
56};
57
58static int sgmii_riser_phy_addr[] = {
59 SGMII_CARD_PORT1_PHY_ADDR,
60 SGMII_CARD_PORT2_PHY_ADDR,
61 SGMII_CARD_PORT3_PHY_ADDR,
62 SGMII_CARD_PORT4_PHY_ADDR,
63};
64
65/* Slot2 does not have EMI connections */
66#define EMI_NONE 0xFF
67#define EMI1_RGMII1 0
68#define EMI1_RGMII2 1
69#define EMI1_SLOT1 2
70
71static const char * const mdio_names[] = {
72 "LS1088A_QDS_MDIO0",
73 "LS1088A_QDS_MDIO1",
74 "LS1088A_QDS_MDIO2",
75 DEFAULT_WRIOP_MDIO2_NAME,
76};
77
78struct ls1088a_qds_mdio {
79 u8 muxval;
80 struct mii_dev *realbus;
81};
82
83static void sgmii_configure_repeater(int dpmac)
84{
85 struct mii_dev *bus;
86 uint8_t a = 0xf;
87 int i, j, ret;
88 unsigned short value;
89 const char *dev = "LS1088A_QDS_MDIO2";
90 int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
91 int i2c_phy_addr = 0;
92 int phy_addr = 0;
93
94 uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
95 uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
96 uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
97 uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
98
99 /* Set I2c to Slot 1 */
100 i2c_write(0x77, 0, 0, &a, 1);
101
102 switch (dpmac) {
103 case 1:
104 i2c_phy_addr = i2c_addr[1];
105 phy_addr = 4;
106 break;
107 case 2:
108 i2c_phy_addr = i2c_addr[0];
109 phy_addr = 0;
110 break;
111 case 3:
112 i2c_phy_addr = i2c_addr[3];
113 phy_addr = 0xc;
114 break;
115 case 7:
116 i2c_phy_addr = i2c_addr[2];
117 phy_addr = 8;
118 break;
119 }
120
121 /* Check the PHY status */
122 ret = miiphy_set_current_dev(dev);
123 if (ret > 0)
124 goto error;
125
126 bus = mdio_get_current_dev();
127 debug("Reading from bus %s\n", bus->name);
128
129 ret = miiphy_write(dev, phy_addr, 0x1f, 3);
130 if (ret > 0)
131 goto error;
132
133 mdelay(10);
134 ret = miiphy_read(dev, phy_addr, 0x11, &value);
135 if (ret > 0)
136 goto error;
137
138 mdelay(10);
139
140 if ((value & 0xfff) == 0x401) {
141 miiphy_write(dev, phy_addr, 0x1f, 0);
142 printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
143 return;
144 }
145
146 for (i = 0; i < 4; i++) {
147 for (j = 0; j < 4; j++) {
148 a = 0x18;
149 i2c_write(i2c_phy_addr, 6, 1, &a, 1);
150 a = 0x38;
151 i2c_write(i2c_phy_addr, 4, 1, &a, 1);
152 a = 0x4;
153 i2c_write(i2c_phy_addr, 8, 1, &a, 1);
154
155 i2c_write(i2c_phy_addr, 0xf, 1,
156 &ch_a_eq[i], 1);
157 i2c_write(i2c_phy_addr, 0x11, 1,
158 &ch_a_ctl2[j], 1);
159
160 i2c_write(i2c_phy_addr, 0x16, 1,
161 &ch_b_eq[i], 1);
162 i2c_write(i2c_phy_addr, 0x18, 1,
163 &ch_b_ctl2[j], 1);
164
165 a = 0x14;
166 i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
167 a = 0xb5;
168 i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
169 a = 0x20;
170 i2c_write(i2c_phy_addr, 4, 1, &a, 1);
171 mdelay(100);
172 ret = miiphy_read(dev, phy_addr, 0x11, &value);
173 if (ret > 0)
174 goto error;
175
176 mdelay(100);
177 ret = miiphy_read(dev, phy_addr, 0x11, &value);
178 if (ret > 0)
179 goto error;
180
181 if ((value & 0xfff) == 0x401) {
182 printf("DPMAC %d :PHY is configured ",
183 dpmac);
184 printf("after setting repeater 0x%x\n",
185 value);
186 i = 5;
187 j = 5;
188 } else {
189 printf("DPMAC %d :PHY is failed to ",
190 dpmac);
191 printf("configure the repeater 0x%x\n", value);
192 }
193 }
194 }
195 miiphy_write(dev, phy_addr, 0x1f, 0);
196error:
197 if (ret)
198 printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
199 return;
200}
201
202static void qsgmii_configure_repeater(int dpmac)
203{
204 uint8_t a = 0xf;
205 int i, j;
206 int i2c_phy_addr = 0;
207 int phy_addr = 0;
208 int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
209
210 uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
211 uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
212 uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
213 uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
214
215 const char *dev = mdio_names[EMI1_SLOT1];
216 int ret = 0;
217 unsigned short value;
218
219 /* Set I2c to Slot 1 */
220 i2c_write(0x77, 0, 0, &a, 1);
221
222 switch (dpmac) {
223 case 7:
224 case 8:
225 case 9:
226 case 10:
227 i2c_phy_addr = i2c_addr[2];
228 phy_addr = 8;
229 break;
230
231 case 3:
232 case 4:
233 case 5:
234 case 6:
235 i2c_phy_addr = i2c_addr[3];
236 phy_addr = 0xc;
237 break;
238 }
239
240 /* Check the PHY status */
241 ret = miiphy_set_current_dev(dev);
242 ret = miiphy_write(dev, phy_addr, 0x1f, 3);
243 mdelay(10);
244 ret = miiphy_read(dev, phy_addr, 0x11, &value);
245 mdelay(10);
246 ret = miiphy_read(dev, phy_addr, 0x11, &value);
247 mdelay(10);
248 if ((value & 0xf) == 0xf) {
249 miiphy_write(dev, phy_addr, 0x1f, 0);
250 printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
251 return;
252 }
253
254 for (i = 0; i < 4; i++) {
255 for (j = 0; j < 4; j++) {
256 a = 0x18;
257 i2c_write(i2c_phy_addr, 6, 1, &a, 1);
258 a = 0x38;
259 i2c_write(i2c_phy_addr, 4, 1, &a, 1);
260 a = 0x4;
261 i2c_write(i2c_phy_addr, 8, 1, &a, 1);
262
263 i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
264 i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
265
266 i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
267 i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
268
269 a = 0x14;
270 i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
271 a = 0xb5;
272 i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
273 a = 0x20;
274 i2c_write(i2c_phy_addr, 4, 1, &a, 1);
275 mdelay(100);
276 ret = miiphy_read(dev, phy_addr, 0x11, &value);
277 if (ret > 0)
278 goto error;
279 mdelay(1);
280 ret = miiphy_read(dev, phy_addr, 0x11, &value);
281 if (ret > 0)
282 goto error;
283 mdelay(10);
284 if ((value & 0xf) == 0xf) {
285 miiphy_write(dev, phy_addr, 0x1f, 0);
286 printf("DPMAC %d :PHY is ..... Configured\n",
287 dpmac);
288 return;
289 }
290 }
291 }
292error:
293 printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
294 return;
295}
296
297static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
298{
299 return mdio_names[muxval];
300}
301
302struct mii_dev *mii_dev_for_muxval(u8 muxval)
303{
304 struct mii_dev *bus;
305 const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
306
307 if (!name) {
308 printf("No bus for muxval %x\n", muxval);
309 return NULL;
310 }
311
312 bus = miiphy_get_dev_by_name(name);
313
314 if (!bus) {
315 printf("No bus by name %s\n", name);
316 return NULL;
317 }
318
319 return bus;
320}
321
322static void ls1088a_qds_enable_SFP_TX(u8 muxval)
323{
324 u8 brdcfg9;
325
326 brdcfg9 = QIXIS_READ(brdcfg[9]);
327 brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
328 brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
329 QIXIS_WRITE(brdcfg[9], brdcfg9);
330}
331
332static void ls1088a_qds_mux_mdio(u8 muxval)
333{
334 u8 brdcfg4;
335
336 if (muxval <= 5) {
337 brdcfg4 = QIXIS_READ(brdcfg[4]);
338 brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
339 brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
340 QIXIS_WRITE(brdcfg[4], brdcfg4);
341 }
342}
343
344static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
345 int devad, int regnum)
346{
347 struct ls1088a_qds_mdio *priv = bus->priv;
348
349 ls1088a_qds_mux_mdio(priv->muxval);
350
351 return priv->realbus->read(priv->realbus, addr, devad, regnum);
352}
353
354static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
355 int regnum, u16 value)
356{
357 struct ls1088a_qds_mdio *priv = bus->priv;
358
359 ls1088a_qds_mux_mdio(priv->muxval);
360
361 return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
362}
363
364static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
365{
366 struct ls1088a_qds_mdio *priv = bus->priv;
367
368 return priv->realbus->reset(priv->realbus);
369}
370
371static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
372{
373 struct ls1088a_qds_mdio *pmdio;
374 struct mii_dev *bus = mdio_alloc();
375
376 if (!bus) {
377 printf("Failed to allocate ls1088a_qds MDIO bus\n");
378 return -1;
379 }
380
381 pmdio = malloc(sizeof(*pmdio));
382 if (!pmdio) {
383 printf("Failed to allocate ls1088a_qds private data\n");
384 free(bus);
385 return -1;
386 }
387
388 bus->read = ls1088a_qds_mdio_read;
389 bus->write = ls1088a_qds_mdio_write;
390 bus->reset = ls1088a_qds_mdio_reset;
391 sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
392
393 pmdio->realbus = miiphy_get_dev_by_name(realbusname);
394
395 if (!pmdio->realbus) {
396 printf("No bus with name %s\n", realbusname);
397 free(bus);
398 free(pmdio);
399 return -1;
400 }
401
402 pmdio->muxval = muxval;
403 bus->priv = pmdio;
404
405 return mdio_register(bus);
406}
407
408/*
409 * Initialize the dpmac_info array.
410 *
411 */
412static void initialize_dpmac_to_slot(void)
413{
414 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
415 u32 serdes1_prtcl, cfg;
416
417 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
418 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
419 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
420 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
421
422 switch (serdes1_prtcl) {
423 case 0x12:
424 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
425 serdes1_prtcl);
426 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
427 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
428 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
429 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
430 break;
431 case 0x15:
432 case 0x1D:
433 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
434 serdes1_prtcl);
435 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
436 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
437 lane_to_slot_fsm1[2] = EMI_NONE;
438 lane_to_slot_fsm1[3] = EMI_NONE;
439 break;
440 case 0x1E:
441 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
442 serdes1_prtcl);
443 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
444 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
445 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
446 lane_to_slot_fsm1[3] = EMI_NONE;
447 break;
448 case 0x3A:
449 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
450 serdes1_prtcl);
451 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
452 lane_to_slot_fsm1[1] = EMI_NONE;
453 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
454 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
455 break;
456
457 default:
458 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
459 __func__, serdes1_prtcl);
460 break;
461 }
462}
463
464void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
465{
466 struct mii_dev *bus;
467 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
468 u32 serdes1_prtcl, cfg;
469
470 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
471 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
472 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
473 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
474
475 int *riser_phy_addr;
476 char *env_hwconfig = env_get("hwconfig");
477
478 if (hwconfig_f("xqsgmii", env_hwconfig))
479 riser_phy_addr = &xqsgii_riser_phy_addr[0];
480 else
481 riser_phy_addr = &sgmii_riser_phy_addr[0];
482
483 switch (serdes1_prtcl) {
484 case 0x12:
485 case 0x15:
486 case 0x1E:
487 case 0x3A:
488 switch (dpmac_id) {
489 case 1:
490 wriop_set_phy_address(dpmac_id, riser_phy_addr[1]);
491 break;
492 case 2:
493 wriop_set_phy_address(dpmac_id, riser_phy_addr[0]);
494 break;
495 case 3:
496 wriop_set_phy_address(dpmac_id, riser_phy_addr[3]);
497 break;
498 case 7:
499 wriop_set_phy_address(dpmac_id, riser_phy_addr[2]);
500 break;
501 default:
502 printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
503 break;
504 }
505 break;
506 default:
507 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
508 __func__, serdes1_prtcl);
509 return;
510 }
511 dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
512 bus = mii_dev_for_muxval(EMI1_SLOT1);
513 wriop_set_mdio(dpmac_id, bus);
514}
515
516void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
517{
518 struct mii_dev *bus;
519 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
520 u32 serdes1_prtcl, cfg;
521
522 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
523 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
524 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
525 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
526
527 switch (serdes1_prtcl) {
528 case 0x1D:
529 case 0x1E:
530 switch (dpmac_id) {
531 case 3:
532 case 4:
533 case 5:
534 case 6:
535 wriop_set_phy_address(dpmac_id, dpmac_id + 9);
536 break;
537 case 7:
538 case 8:
539 case 9:
540 case 10:
541 wriop_set_phy_address(dpmac_id, dpmac_id + 1);
542 break;
543 }
544
545 dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
546 bus = mii_dev_for_muxval(EMI1_SLOT1);
547 wriop_set_mdio(dpmac_id, bus);
548 break;
549 default:
550 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
551 serdes1_prtcl);
552 break;
553 }
554}
555
556void ls1088a_handle_phy_interface_xsgmii(int i)
557{
558 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
559 u32 serdes1_prtcl, cfg;
560
561 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
562 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
563 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
564 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
565
566 switch (serdes1_prtcl) {
567 case 0x15:
568 case 0x1D:
569 case 0x1E:
570 wriop_set_phy_address(i, i + 26);
571 ls1088a_qds_enable_SFP_TX(SFP_TX);
572 break;
573 default:
574 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
575 serdes1_prtcl);
576 break;
577 }
578}
Prabhakar Kushwaha9f244b32017-08-31 16:37:32 +0530579
580static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
581{
582 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
583 u32 serdes1_prtcl, cfg;
584 struct mii_dev *bus;
585
586 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
587 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
588 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
589 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
590
591 switch (dpmac_id) {
592 case 4:
593 wriop_set_phy_address(dpmac_id, RGMII_PHY1_ADDR);
594 dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
595 bus = mii_dev_for_muxval(EMI1_RGMII1);
596 wriop_set_mdio(dpmac_id, bus);
597 break;
598 case 5:
599 wriop_set_phy_address(dpmac_id, RGMII_PHY2_ADDR);
600 dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
601 bus = mii_dev_for_muxval(EMI1_RGMII2);
602 wriop_set_mdio(dpmac_id, bus);
603 break;
604 default:
605 printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
606 serdes1_prtcl);
607 break;
608 }
609}
Ashish Kumar77697762017-08-31 16:12:55 +0530610#endif
611
612int board_eth_init(bd_t *bis)
613{
614 int error = 0, i;
Ashish Kumar77697762017-08-31 16:12:55 +0530615#ifdef CONFIG_FSL_MC_ENET
616 struct memac_mdio_info *memac_mdio0_info;
617 char *env_hwconfig = env_get("hwconfig");
618
619 initialize_dpmac_to_slot();
620
621 memac_mdio0_info = (struct memac_mdio_info *)malloc(
622 sizeof(struct memac_mdio_info));
623 memac_mdio0_info->regs =
624 (struct memac_mdio_controller *)
625 CONFIG_SYS_FSL_WRIOP1_MDIO1;
626 memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
627
628 /* Register the real MDIO1 bus */
629 fm_memac_mdio_init(bis, memac_mdio0_info);
Ashish Kumar77697762017-08-31 16:12:55 +0530630 /* Register the muxing front-ends to the MDIO buses */
631 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
632 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
633 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
634
635 for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
636 switch (wriop_get_enet_if(i)) {
Prabhakar Kushwaha9f244b32017-08-31 16:37:32 +0530637 case PHY_INTERFACE_MODE_RGMII:
Ashish Kumar2af1b082017-10-12 15:21:54 +0530638 case PHY_INTERFACE_MODE_RGMII_ID:
Prabhakar Kushwaha9f244b32017-08-31 16:37:32 +0530639 ls1088a_handle_phy_interface_rgmii(i);
640 break;
Ashish Kumar77697762017-08-31 16:12:55 +0530641 case PHY_INTERFACE_MODE_QSGMII:
642 ls1088a_handle_phy_interface_qsgmii(i);
643 break;
644 case PHY_INTERFACE_MODE_SGMII:
645 ls1088a_handle_phy_interface_sgmii(i);
646 break;
647 case PHY_INTERFACE_MODE_XGMII:
648 ls1088a_handle_phy_interface_xsgmii(i);
649 break;
650 default:
651 break;
652
653 if (i == 16)
654 i = NUM_WRIOP_PORTS;
655 }
656 }
657
Ashish Kumar77697762017-08-31 16:12:55 +0530658 error = cpu_eth_init(bis);
659
660 if (hwconfig_f("xqsgmii", env_hwconfig)) {
661 for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
662 switch (wriop_get_enet_if(i)) {
663 case PHY_INTERFACE_MODE_QSGMII:
664 qsgmii_configure_repeater(i);
665 break;
666 case PHY_INTERFACE_MODE_SGMII:
667 sgmii_configure_repeater(i);
668 break;
669 default:
670 break;
671 }
672
673 if (i == 16)
674 i = NUM_WRIOP_PORTS;
675 }
676 }
677#endif
678 error = pci_eth_init(bis);
679 return error;
680}
Bogdan Purcareatac48deb92017-10-05 06:56:53 +0000681
682#if defined(CONFIG_RESET_PHY_R)
683void reset_phy(void)
684{
685 mc_env_boot();
686}
687#endif /* CONFIG_RESET_PHY_R */