Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / 0e31666dfa043ab71fb1fbbba4feacfe8af3e06b / . / arch / arm / dts / hi3798cv200.dtsi
blob: 8b9c5ad05a19ae50a3a29fd435087802835237f2 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
Jorge Ramirez-Ortizccaa83f2017-06-26 15:52:47 +0200[diff] [blame]2/*
3 * DTS File for HiSilicon Hi3798cv200 SoC.
4 *
5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
Jorge Ramirez-Ortizccaa83f2017-06-26 15:52:47 +0200[diff] [blame]6 */
7
8#include <dt-bindings/clock/histb-clock.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/reset/ti-syscon.h>
11
12/ {
13 compatible = "hisilicon,hi3798cv200";
14 interrupt-parent = <&gic>;
15 #address-cells = <2>;
16 #size-cells = <2>;
17
18 psci {
19 compatible = "arm,psci-0.2";
20 method = "smc";
21 };
22
23 cpus {
24 #address-cells = <2>;
25 #size-cells = <0>;
26
27 cpu@0 {
28 compatible = "arm,cortex-a53";
29 device_type = "cpu";
30 reg = <0x0 0x0>;
31 enable-method = "psci";
32 };
33
34 cpu@1 {
35 compatible = "arm,cortex-a53";
36 device_type = "cpu";
37 reg = <0x0 0x1>;
38 enable-method = "psci";
39 };
40
41 cpu@2 {
42 compatible = "arm,cortex-a53";
43 device_type = "cpu";
44 reg = <0x0 0x2>;
45 enable-method = "psci";
46 };
47
48 cpu@3 {
49 compatible = "arm,cortex-a53";
50 device_type = "cpu";
51 reg = <0x0 0x3>;
52 enable-method = "psci";
53 };
54 };
55
56 gic: interrupt-controller@f1001000 {
57 compatible = "arm,gic-400";
58 reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
59 <0x0 0xf1002000 0x0 0x100>; /* GICC */
60 #address-cells = <0>;
61 #interrupt-cells = <3>;
62 interrupt-controller;
63 };
64
65 timer {
66 compatible = "arm,armv8-timer";
67 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
68 IRQ_TYPE_LEVEL_LOW)>,
69 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
70 IRQ_TYPE_LEVEL_LOW)>,
71 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
72 IRQ_TYPE_LEVEL_LOW)>,
73 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
74 IRQ_TYPE_LEVEL_LOW)>;
75 };
76
77 soc: soc@f0000000 {
78 compatible = "simple-bus";
79 #address-cells = <1>;
80 #size-cells = <1>;
81 ranges = <0x0 0x0 0xf0000000 0x10000000>;
82
83 crg: clock-reset-controller@8a22000 {
84 compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
85 reg = <0x8a22000 0x1000>;
86 #clock-cells = <1>;
87 #reset-cells = <2>;
88
89 gmacphyrst: reset-controller {
90 compatible = "ti,syscon-reset";
91 #reset-cells = <1>;
92 ti,reset-bits =
93 <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
94 DEASSERT_SET|STATUS_NONE)>,
95 <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
96 DEASSERT_SET|STATUS_NONE)>;
97 };
98 };
99
100 sysctrl: system-controller@8000000 {
101 compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
102 reg = <0x8000000 0x1000>;
103 #clock-cells = <1>;
104 #reset-cells = <2>;
105 };
106
107 uart0: serial@8b00000 {
108 compatible = "arm,pl011", "arm,primecell";
109 reg = <0x8b00000 0x1000>;
110 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
111 clocks = <&sysctrl HISTB_UART0_CLK>;
112 clock-names = "apb_pclk";
113 status = "disabled";
114 };
115
116 uart2: serial@8b02000 {
117 compatible = "arm,pl011", "arm,primecell";
118 reg = <0x8b02000 0x1000>;
119 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
120 clocks = <&crg HISTB_UART2_CLK>;
121 clock-names = "apb_pclk";
122 status = "disabled";
123 };
124
125 i2c0: i2c@8b10000 {
126 compatible = "hisilicon,hix5hd2-i2c";
127 reg = <0x8b10000 0x1000>;
128 #address-cells = <1>;
129 #size-cells = <0>;
130 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
131 clock-frequency = <400000>;
132 clocks = <&crg HISTB_I2C0_CLK>;
133 status = "disabled";
134 };
135
136 i2c1: i2c@8b11000 {
137 compatible = "hisilicon,hix5hd2-i2c";
138 reg = <0x8b11000 0x1000>;
139 #address-cells = <1>;
140 #size-cells = <0>;
141 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
142 clock-frequency = <400000>;
143 clocks = <&crg HISTB_I2C1_CLK>;
144 status = "disabled";
145 };
146
147 i2c2: i2c@8b12000 {
148 compatible = "hisilicon,hix5hd2-i2c";
149 reg = <0x8b12000 0x1000>;
150 #address-cells = <1>;
151 #size-cells = <0>;
152 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
153 clock-frequency = <400000>;
154 clocks = <&crg HISTB_I2C2_CLK>;
155 status = "disabled";
156 };
157
158 i2c3: i2c@8b13000 {
159 compatible = "hisilicon,hix5hd2-i2c";
160 reg = <0x8b13000 0x1000>;
161 #address-cells = <1>;
162 #size-cells = <0>;
163 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
164 clock-frequency = <400000>;
165 clocks = <&crg HISTB_I2C3_CLK>;
166 status = "disabled";
167 };
168
169 i2c4: i2c@8b14000 {
170 compatible = "hisilicon,hix5hd2-i2c";
171 reg = <0x8b14000 0x1000>;
172 #address-cells = <1>;
173 #size-cells = <0>;
174 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
175 clock-frequency = <400000>;
176 clocks = <&crg HISTB_I2C4_CLK>;
177 status = "disabled";
178 };
179
180 spi0: spi@8b1a000 {
181 compatible = "arm,pl022", "arm,primecell";
182 reg = <0x8b1a000 0x1000>;
183 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
184 num-cs = <1>;
185 cs-gpios = <&gpio7 1 0>;
186 clocks = <&crg HISTB_SPI0_CLK>;
187 clock-names = "apb_pclk";
188 #address-cells = <1>;
189 #size-cells = <0>;
190 status = "disabled";
191 };
192
193 emmc: mmc@9830000 {
194 compatible = "snps,dw-mshc";
195 reg = <0x9830000 0x10000>;
196 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
197 clocks = <&crg HISTB_MMC_CIU_CLK>,
198 <&crg HISTB_MMC_BIU_CLK>;
199 clock-names = "ciu", "biu";
200 };
201
202 gpio0: gpio@8b20000 {
203 compatible = "arm,pl061", "arm,primecell";
204 reg = <0x8b20000 0x1000>;
205 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
206 gpio-controller;
207 #gpio-cells = <2>;
208 interrupt-controller;
209 #interrupt-cells = <2>;
210 clocks = <&crg HISTB_APB_CLK>;
211 clock-names = "apb_pclk";
212 status = "disabled";
213 };
214
215 gpio1: gpio@8b21000 {
216 compatible = "arm,pl061", "arm,primecell";
217 reg = <0x8b21000 0x1000>;
218 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
219 gpio-controller;
220 #gpio-cells = <2>;
221 interrupt-controller;
222 #interrupt-cells = <2>;
223 clocks = <&crg HISTB_APB_CLK>;
224 clock-names = "apb_pclk";
225 status = "disabled";
226 };
227
228 gpio2: gpio@8b22000 {
229 compatible = "arm,pl061", "arm,primecell";
230 reg = <0x8b22000 0x1000>;
231 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
232 gpio-controller;
233 #gpio-cells = <2>;
234 interrupt-controller;
235 #interrupt-cells = <2>;
236 clocks = <&crg HISTB_APB_CLK>;
237 clock-names = "apb_pclk";
238 status = "disabled";
239 };
240
241 gpio3: gpio@8b23000 {
242 compatible = "arm,pl061", "arm,primecell";
243 reg = <0x8b23000 0x1000>;
244 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
245 gpio-controller;
246 #gpio-cells = <2>;
247 interrupt-controller;
248 #interrupt-cells = <2>;
249 clocks = <&crg HISTB_APB_CLK>;
250 clock-names = "apb_pclk";
251 status = "disabled";
252 };
253
254 gpio4: gpio@8b24000 {
255 compatible = "arm,pl061", "arm,primecell";
256 reg = <0x8b24000 0x1000>;
257 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
258 gpio-controller;
259 #gpio-cells = <2>;
260 interrupt-controller;
261 #interrupt-cells = <2>;
262 clocks = <&crg HISTB_APB_CLK>;
263 clock-names = "apb_pclk";
264 status = "disabled";
265 };
266
267 gpio5: gpio@8004000 {
268 compatible = "arm,pl061", "arm,primecell";
269 reg = <0x8004000 0x1000>;
270 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
271 gpio-controller;
272 #gpio-cells = <2>;
273 interrupt-controller;
274 #interrupt-cells = <2>;
275 clocks = <&crg HISTB_APB_CLK>;
276 clock-names = "apb_pclk";
277 status = "disabled";
278 };
279
280 gpio6: gpio@8b26000 {
281 compatible = "arm,pl061", "arm,primecell";
282 reg = <0x8b26000 0x1000>;
283 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
284 gpio-controller;
285 #gpio-cells = <2>;
286 interrupt-controller;
287 #interrupt-cells = <2>;
288 clocks = <&crg HISTB_APB_CLK>;
289 clock-names = "apb_pclk";
290 status = "disabled";
291 };
292
293 gpio7: gpio@8b27000 {
294 compatible = "arm,pl061", "arm,primecell";
295 reg = <0x8b27000 0x1000>;
296 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
297 gpio-controller;
298 #gpio-cells = <2>;
299 interrupt-controller;
300 #interrupt-cells = <2>;
301 clocks = <&crg HISTB_APB_CLK>;
302 clock-names = "apb_pclk";
303 status = "disabled";
304 };
305
306 gpio8: gpio@8b28000 {
307 compatible = "arm,pl061", "arm,primecell";
308 reg = <0x8b28000 0x1000>;
309 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
310 gpio-controller;
311 #gpio-cells = <2>;
312 interrupt-controller;
313 #interrupt-cells = <2>;
314 clocks = <&crg HISTB_APB_CLK>;
315 clock-names = "apb_pclk";
316 status = "disabled";
317 };
318
319 gpio9: gpio@8b29000 {
320 compatible = "arm,pl061", "arm,primecell";
321 reg = <0x8b29000 0x1000>;
322 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
323 gpio-controller;
324 #gpio-cells = <2>;
325 interrupt-controller;
326 #interrupt-cells = <2>;
327 clocks = <&crg HISTB_APB_CLK>;
328 clock-names = "apb_pclk";
329 status = "disabled";
330 };
331
332 gpio10: gpio@8b2a000 {
333 compatible = "arm,pl061", "arm,primecell";
334 reg = <0x8b2a000 0x1000>;
335 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
336 gpio-controller;
337 #gpio-cells = <2>;
338 interrupt-controller;
339 #interrupt-cells = <2>;
340 clocks = <&crg HISTB_APB_CLK>;
341 clock-names = "apb_pclk";
342 status = "disabled";
343 };
344
345 gpio11: gpio@8b2b000 {
346 compatible = "arm,pl061", "arm,primecell";
347 reg = <0x8b2b000 0x1000>;
348 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
349 gpio-controller;
350 #gpio-cells = <2>;
351 interrupt-controller;
352 #interrupt-cells = <2>;
353 clocks = <&crg HISTB_APB_CLK>;
354 clock-names = "apb_pclk";
355 status = "disabled";
356 };
357
358 gpio12: gpio@8b2c000 {
359 compatible = "arm,pl061", "arm,primecell";
360 reg = <0x8b2c000 0x1000>;
361 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
362 gpio-controller;
363 #gpio-cells = <2>;
364 interrupt-controller;
365 #interrupt-cells = <2>;
366 clocks = <&crg HISTB_APB_CLK>;
367 clock-names = "apb_pclk";
368 status = "disabled";
369 };
370
371 gmac0: ethernet@9840000 {
372 compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
373 reg = <0x9840000 0x1000>,
374 <0x984300c 0x4>;
375 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
376 clocks = <&crg HISTB_ETH0_MAC_CLK>,
377 <&crg HISTB_ETH0_MACIF_CLK>;
378 clock-names = "mac_core", "mac_ifc";
379 resets = <&crg 0xcc 8>,
380 <&crg 0xcc 10>,
381 <&gmacphyrst 0>;
382 reset-names = "mac_core", "mac_ifc", "phy";
383 status = "disabled";
384 };
385
386 gmac1: ethernet@9841000 {
387 compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
388 reg = <0x9841000 0x1000>,
389 <0x9843010 0x4>;
390 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
391 clocks = <&crg HISTB_ETH1_MAC_CLK>,
392 <&crg HISTB_ETH1_MACIF_CLK>;
393 clock-names = "mac_core", "mac_ifc";
394 resets = <&crg 0xcc 9>,
395 <&crg 0xcc 11>,
396 <&gmacphyrst 1>;
397 reset-names = "mac_core", "mac_ifc", "phy";
398 status = "disabled";
399 };
400
401 ir: ir@8001000 {
402 compatible = "hisilicon,hix5hd2-ir";
403 reg = <0x8001000 0x1000>;
404 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
405 clocks = <&sysctrl HISTB_IR_CLK>;
406 status = "disabled";
407 };
408 };
409};