blob: 077027695db0a78c1954baf30762fe4821e199b6 [file] [log] [blame]
Nobuhiro Iwamatsu0d53a472008-08-31 22:45:08 +09001========================================
2Renesas Technology R0P7785LC0011RL board
3========================================
4
5This board specification:
6=========================
7
8The R0P7785LC0011RL(board config name:sh7785lcr) has the following device:
9
10 - SH7785 (SH-4A)
11 - DDR2-SDRAM 512MB
12 - NOR Flash 64MB
13 - 2D Graphic controller
14 - SATA controller
15 - Ethernet controller
16 - USB host/peripheral controller
17 - SD controller
18 - I2C controller
19 - RTC
20
21This board has 2 physical memory maps. It can be changed with DIP switch(S2-5).
22
23 phys address | S2-5 = OFF | S2-5 = ON
24 -------------------------------+---------------+---------------
25 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
26 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
27 0x06000000 - 0x07ffffff(CS1) | reserved | I2C
28 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
29 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
30 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
31 0x14000000 - 0x17ffffff(CS5) | I2C | USB
32 0x18000000 - 0x1bffffff(CS6) | reserved | SD
33 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
34
35
36This board specific command:
37============================
38
39This board has the following its specific command:
40
41 - hwtest
42 - printmac
43 - setmac
44
45
461. hwtest
47
48This is self-check command. This command has the following options:
49
50 - all : test all hardware
51 - pld : output PLD version
52 - led : turn on LEDs
53 - dipsw : test DIP switch
54 - sm107 : output SM107 version
55 - net : check RTL8110 ID
56 - sata : check SiI3512 ID
57 - net : output PCI slot device ID
58
59i.e)
60=> hwtest led
61turn on LEDs 3, 5, 7, 9
62turn on LEDs 4, 6, 8, 10
63
64=> hwtest net
65Ethernet OK
66
67
682. printmac
69
70This command outputs MAC address of this board.
71
72i.e)
73=> printmac
74MAC = 00:00:87:**:**:**
75
76
773. setmac
78
79This command writes MAC address of this board.
80
81i.e)
82=> setmac 00:00:87:**:**:**
83