Stefan Roese | 8e0f8ef | 2022-04-07 09:11:52 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018-2022 Marvell International Ltd. |
| 4 | */ |
| 5 | |
| 6 | #include <dm.h> |
| 7 | #include <dm/device_compat.h> |
| 8 | #include <env.h> |
| 9 | #include <net.h> |
| 10 | #include <netdev.h> |
| 11 | #include <malloc.h> |
| 12 | #include <miiphy.h> |
| 13 | #include <misc.h> |
| 14 | #include <asm/io.h> |
| 15 | #include <linux/delay.h> |
| 16 | |
| 17 | #include <mach/cvmx-regs.h> |
| 18 | #include <mach/cvmx-csr.h> |
| 19 | #include <mach/cvmx-bootmem.h> |
| 20 | #include <mach/octeon-model.h> |
| 21 | #include <mach/cvmx-fuse.h> |
| 22 | #include <mach/octeon-feature.h> |
| 23 | #include <mach/octeon_fdt.h> |
| 24 | #include <mach/cvmx-qlm.h> |
| 25 | #include <mach/octeon_eth.h> |
| 26 | #include <mach/octeon_qlm.h> |
| 27 | #include <mach/cvmx-pcie.h> |
| 28 | #include <mach/cvmx-coremask.h> |
| 29 | |
| 30 | #include <mach/cvmx-agl-defs.h> |
| 31 | #include <mach/cvmx-asxx-defs.h> |
| 32 | #include <mach/cvmx-bgxx-defs.h> |
| 33 | #include <mach/cvmx-dbg-defs.h> |
| 34 | #include <mach/cvmx-gmxx-defs.h> |
| 35 | #include <mach/cvmx-gserx-defs.h> |
| 36 | #include <mach/cvmx-ipd-defs.h> |
| 37 | #include <mach/cvmx-l2c-defs.h> |
| 38 | #include <mach/cvmx-npi-defs.h> |
| 39 | #include <mach/cvmx-pcsx-defs.h> |
| 40 | #include <mach/cvmx-pexp-defs.h> |
| 41 | #include <mach/cvmx-pki-defs.h> |
| 42 | #include <mach/cvmx-pko-defs.h> |
| 43 | #include <mach/cvmx-smix-defs.h> |
| 44 | #include <mach/cvmx-sriox-defs.h> |
| 45 | #include <mach/cvmx-xcv-defs.h> |
| 46 | #include <mach/cvmx-pcsxx-defs.h> |
| 47 | |
| 48 | #include <mach/cvmx-helper.h> |
| 49 | #include <mach/cvmx-helper-board.h> |
| 50 | #include <mach/cvmx-helper-fdt.h> |
| 51 | #include <mach/cvmx-helper-bgx.h> |
| 52 | #include <mach/cvmx-helper-cfg.h> |
| 53 | |
| 54 | #include <mach/cvmx-hwpko.h> |
| 55 | #include <mach/cvmx-pko.h> |
| 56 | #include <mach/cvmx-pki.h> |
| 57 | #include <mach/cvmx-config.h> |
| 58 | #include <mach/cvmx-mdio.h> |
| 59 | |
| 60 | /** Maximum receive packet size (hardware default is 1536) */ |
| 61 | #define CONFIG_OCTEON_NETWORK_MRU 1536 |
| 62 | |
| 63 | #define OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX "__tmp" |
| 64 | |
| 65 | /** |
| 66 | * Enables RX packet debugging if octeon_debug_rx_packets is set in the |
| 67 | * environment. |
| 68 | */ |
| 69 | #define DEBUG_RX_PACKET |
| 70 | |
| 71 | /** |
| 72 | * Enables TX packet debugging if octeon_debug_tx_packets is set in the |
| 73 | * environment. |
| 74 | */ |
| 75 | #define DEBUG_TX_PACKET |
| 76 | |
| 77 | /* Global flag indicating common hw has been set up */ |
| 78 | static int octeon_global_hw_inited; |
| 79 | |
| 80 | #if defined(DEBUG_RX_PACKET) || defined(DEBUG_TX_PACKET) |
| 81 | static int packet_rx_debug; |
| 82 | static int packet_tx_debug; |
| 83 | #endif |
| 84 | |
| 85 | /* Make sure that we have enough buffers to keep prefetching blocks happy. |
| 86 | * Absolute minimum is probably about 200. |
| 87 | */ |
| 88 | #define NUM_PACKET_BUFFERS 1000 |
| 89 | |
| 90 | #define PKO_SHUTDOWN_TIMEOUT_VAL 100 |
| 91 | |
| 92 | /* Define the offsets from the base CSR */ |
| 93 | #define GMX_PRT_CFG 0x10 |
| 94 | |
| 95 | #define GMX_RX_FRM_MAX 0x30 |
| 96 | #define GMX_RX_JABBER 0x38 |
| 97 | |
| 98 | #define GMX_RX_ADR_CTL 0x100 |
| 99 | #define GMX_RX_ADR_CAM_EN 0x108 |
| 100 | #define GMX_RX_ADR_CAM0 0x180 |
| 101 | #define GMX_RX_ADR_CAM1 0x188 |
| 102 | #define GMX_RX_ADR_CAM2 0x190 |
| 103 | #define GMX_RX_ADR_CAM3 0x198 |
| 104 | #define GMX_RX_ADR_CAM4 0x1a0 |
| 105 | #define GMX_RX_ADR_CAM5 0x1a8 |
| 106 | #define GMX_TX_OVR_BP 0x4c8 |
| 107 | |
| 108 | /** |
| 109 | * Set the hardware MAC address for a device |
| 110 | * |
| 111 | * @param interface interface of port to set |
| 112 | * @param index index of port to set MAC address for |
| 113 | * @param addr Address structure to change it too. |
| 114 | * @return Zero on success |
| 115 | */ |
| 116 | static int cvm_oct_set_mac_address(struct udevice *dev) |
| 117 | { |
| 118 | struct octeon_eth_info *priv = dev_get_priv(dev); |
| 119 | struct eth_pdata *pdata = dev_get_plat(dev); |
| 120 | cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| 121 | cvmx_helper_interface_mode_t mode; |
| 122 | cvmx_gmxx_rxx_adr_ctl_t control; |
| 123 | u8 *ptr = (uint8_t *)pdata->enetaddr; |
| 124 | int interface = priv->interface; |
| 125 | int index = priv->index; |
| 126 | u64 mac = 0; |
| 127 | u64 gmx_reg; |
| 128 | int xipd_port; |
| 129 | int i; |
| 130 | |
| 131 | for (i = 0; i < 6; i++) |
| 132 | mac = (mac << 8) | (u64)(ptr[i]); |
| 133 | |
| 134 | debug("%s(%s (%pM))\n", __func__, dev->name, ptr); |
| 135 | mode = cvmx_helper_interface_get_mode(interface); |
| 136 | |
| 137 | /* It's rather expensive to change the MAC address for BGX so we only |
| 138 | * do this if it has changed or not been set previously. |
| 139 | */ |
| 140 | if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| 141 | xipd_port = cvmx_helper_get_ipd_port(interface, index); |
| 142 | if (priv->last_bgx_mac != mac || !priv->bgx_mac_set) { |
| 143 | cvmx_helper_bgx_set_mac(xipd_port, 1, 2, mac); |
| 144 | priv->last_bgx_mac = mac; |
| 145 | priv->bgx_mac_set = 1; |
| 146 | } |
| 147 | return 0; |
| 148 | } |
| 149 | |
| 150 | if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) { |
| 151 | gmx_reg = CVMX_AGL_GMX_RXX_INT_REG(0); |
| 152 | } else { |
| 153 | gmx_reg = CVMX_GMXX_RXX_INT_REG(index, interface); |
| 154 | csr_wr(CVMX_GMXX_SMACX(index, interface), mac); |
| 155 | } |
| 156 | |
| 157 | /* Disable interface */ |
| 158 | gmx_cfg.u64 = csr_rd(gmx_reg + GMX_PRT_CFG); |
| 159 | csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64 & ~1ull); |
| 160 | debug("%s: gmx reg: 0x%llx\n", __func__, gmx_reg); |
| 161 | |
| 162 | csr_wr(gmx_reg + GMX_RX_ADR_CAM0, ptr[0]); |
| 163 | csr_wr(gmx_reg + GMX_RX_ADR_CAM1, ptr[1]); |
| 164 | csr_wr(gmx_reg + GMX_RX_ADR_CAM2, ptr[2]); |
| 165 | csr_wr(gmx_reg + GMX_RX_ADR_CAM3, ptr[3]); |
| 166 | csr_wr(gmx_reg + GMX_RX_ADR_CAM4, ptr[4]); |
| 167 | csr_wr(gmx_reg + GMX_RX_ADR_CAM5, ptr[5]); |
| 168 | |
| 169 | control.u64 = 0; |
| 170 | control.s.bcst = 1; /* Allow broadcast MAC addresses */ |
| 171 | control.s.mcst = 1; /* Force reject multicast packets */ |
| 172 | control.s.cam_mode = 1; /* Filter packets based on the CAM */ |
| 173 | |
| 174 | csr_wr(gmx_reg + GMX_RX_ADR_CTL, control.u64); |
| 175 | |
| 176 | csr_wr(gmx_reg + GMX_RX_ADR_CAM_EN, 1); |
| 177 | |
| 178 | /* Return interface to previous enable state */ |
| 179 | csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64); |
| 180 | |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static void cvm_oct_fill_hw_memory(u64 pool, u64 size, u64 elements) |
| 185 | { |
| 186 | static int alloc_count; |
| 187 | char tmp_name[64]; |
| 188 | int ret; |
| 189 | |
| 190 | debug("%s: pool: 0x%llx, size: 0xx%llx, count: 0x%llx\n", |
| 191 | __func__, pool, size, elements); |
| 192 | sprintf(tmp_name, "%s_fpa_alloc_%d", |
| 193 | OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX, alloc_count++); |
| 194 | ret = cvmx_fpa_setup_pool(pool, tmp_name, NULL, size, elements); |
| 195 | } |
| 196 | |
| 197 | /** |
| 198 | * Configure common hardware for all interfaces |
| 199 | */ |
| 200 | static void cvm_oct_configure_common_hw(void) |
| 201 | { |
| 202 | int mru = env_get_ulong("octeon_mru", 0, CONFIG_OCTEON_NETWORK_MRU); |
| 203 | int packet_pool_size = CVMX_FPA_PACKET_POOL_SIZE; |
| 204 | |
| 205 | if (mru > packet_pool_size) |
| 206 | packet_pool_size = (mru + CVMX_CACHE_LINE_SIZE - 1) & |
| 207 | ~(CVMX_CACHE_LINE_SIZE - 1); |
| 208 | |
| 209 | /* Setup the FPA */ |
| 210 | cvmx_fpa_enable(); |
| 211 | |
| 212 | cvm_oct_fill_hw_memory(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, |
| 213 | NUM_PACKET_BUFFERS); |
| 214 | #if CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL |
| 215 | if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) { |
| 216 | cvm_oct_fill_hw_memory(CVMX_FPA_OUTPUT_BUFFER_POOL, |
| 217 | CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); |
| 218 | } |
| 219 | #endif |
| 220 | cvm_oct_fill_hw_memory(CVMX_FPA_PACKET_POOL, packet_pool_size, |
| 221 | NUM_PACKET_BUFFERS); |
| 222 | |
| 223 | cvmx_helper_initialize_packet_io_global(); |
| 224 | cvmx_helper_initialize_packet_io_local(); |
| 225 | |
| 226 | /* The MRU defaults to 1536 bytes by the hardware. Setting |
| 227 | * CONFIG_OCTEON_NETWORK_MRU allows this to be overridden. |
| 228 | */ |
| 229 | if (octeon_has_feature(OCTEON_FEATURE_PKI)) { |
| 230 | struct cvmx_pki_global_config gbl_cfg; |
| 231 | int i; |
| 232 | |
| 233 | cvmx_pki_read_global_config(0, &gbl_cfg); |
| 234 | for (i = 0; i < CVMX_PKI_NUM_FRAME_CHECK; i++) |
| 235 | gbl_cfg.frm_len[i].maxlen = mru; |
| 236 | cvmx_pki_write_global_config(0, &gbl_cfg); |
| 237 | } |
| 238 | |
| 239 | /* Set POW get work timeout to maximum value */ |
| 240 | if (octeon_has_feature(OCTEON_FEATURE_CN68XX_WQE) || |
| 241 | octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) |
| 242 | csr_wr(CVMX_SSO_NW_TIM, 0x3ff); |
| 243 | else |
| 244 | csr_wr(CVMX_POW_NW_TIM, 0x3ff); |
| 245 | } |
| 246 | |
| 247 | /** |
| 248 | * Enables Ethernet devices to allow packets to be transmitted and received. |
| 249 | * For example, this is activated when the DHCP command is issued. |
| 250 | * |
| 251 | * @param dev Ethernet device to initialize |
| 252 | * @param bis board data structure, not used. |
| 253 | * |
| 254 | * @return 1 for success |
| 255 | */ |
| 256 | int octeon_eth_init(struct udevice *dev) |
| 257 | { |
| 258 | struct octeon_eth_info *priv = dev_get_priv(dev); |
| 259 | |
| 260 | debug("%s(), dev_ptr: %p, dev: %s, port: %d\n", __func__, dev, |
| 261 | dev->name, priv->port); |
| 262 | |
| 263 | if (priv->initted_flag) { |
| 264 | debug("%s already initialized\n", dev->name); |
| 265 | return 1; |
| 266 | } |
| 267 | |
| 268 | if (!octeon_global_hw_inited) { |
| 269 | debug("Initializing common hardware\n"); |
| 270 | cvm_oct_configure_common_hw(); |
| 271 | } |
| 272 | |
| 273 | /* Ignore backpressure on RGMII ports */ |
| 274 | if (!octeon_has_feature(OCTEON_FEATURE_BGX)) |
| 275 | csr_wr(priv->gmx_base + GMX_TX_OVR_BP, 0xf << 8 | 0xf); |
| 276 | |
| 277 | debug("%s: Setting MAC address\n", __func__); |
| 278 | cvm_oct_set_mac_address(dev); |
| 279 | |
| 280 | if (!octeon_global_hw_inited) { |
| 281 | debug("Enabling packet input\n"); |
| 282 | cvmx_helper_ipd_and_packet_input_enable(); |
| 283 | octeon_global_hw_inited = 1; |
| 284 | |
| 285 | /* Connect, configure and start the PHY, if the device is |
| 286 | * connected to one. If not, then it's most likely an SPF |
| 287 | * enabled port, which does not have such PHY setup here. |
| 288 | */ |
| 289 | if (priv->mdio_dev) { |
| 290 | priv->phy_dev = dm_eth_phy_connect(dev); |
| 291 | phy_config(priv->phy_dev); |
| 292 | phy_startup(priv->phy_dev); |
| 293 | } |
| 294 | } |
| 295 | priv->enabled = 0; |
| 296 | priv->initted_flag = 1; |
| 297 | |
| 298 | debug("%s exiting successfully\n", __func__); |
| 299 | return 1; |
| 300 | } |
| 301 | |
| 302 | /** |
| 303 | * Initializes the specified interface and port |
| 304 | * |
| 305 | * @param interface interface to initialize |
| 306 | * @param index port index on interface |
| 307 | * @param port ipd port number |
| 308 | * @param if_mode interface mode |
| 309 | * |
| 310 | * @return 0 for success, -1 if out of memory, 1 if port is invalid |
| 311 | */ |
| 312 | static int octeon_eth_initialize(struct udevice *dev, int interface, |
| 313 | int index, int port, |
| 314 | cvmx_helper_interface_mode_t if_mode) |
| 315 | { |
| 316 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 317 | int eth; |
| 318 | |
| 319 | eth = cvmx_helper_get_port_fdt_node_offset(interface, index); |
| 320 | if (eth <= 0) { |
| 321 | debug("ERROR: No fdt node for interface %d, index %d\n", |
| 322 | interface, index); |
| 323 | return 1; |
| 324 | } |
| 325 | |
| 326 | oct_eth_info->is_c45 = (if_mode == CVMX_HELPER_INTERFACE_MODE_XAUI) || |
| 327 | (if_mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) || |
| 328 | (if_mode == CVMX_HELPER_INTERFACE_MODE_XFI) || |
| 329 | (if_mode == CVMX_HELPER_INTERFACE_MODE_XLAUI) || |
| 330 | (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR) || |
| 331 | (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR); |
| 332 | oct_eth_info->port = port; |
| 333 | oct_eth_info->index = index; |
| 334 | oct_eth_info->interface = interface; |
| 335 | oct_eth_info->initted_flag = 0; |
| 336 | /* This is guaranteed to force the link state to be printed out */ |
| 337 | oct_eth_info->link_state = 0xffffffffffffffffULL; |
| 338 | debug("Setting up port: %d, int: %d, index: %d, device: octeth%d\n", |
| 339 | oct_eth_info->port, oct_eth_info->interface, oct_eth_info->index, |
| 340 | dev_seq(dev)); |
| 341 | if (if_mode == CVMX_HELPER_INTERFACE_MODE_AGL) { |
| 342 | oct_eth_info->gmx_base = CVMX_AGL_GMX_RXX_INT_REG(0); |
| 343 | } else { |
| 344 | if (!octeon_has_feature(OCTEON_FEATURE_BGX)) |
| 345 | oct_eth_info->gmx_base = |
| 346 | CVMX_GMXX_RXX_INT_REG(index, interface); |
| 347 | } |
| 348 | |
| 349 | return 0; |
| 350 | } |
| 351 | |
| 352 | /** |
| 353 | * @INTERNAL |
| 354 | * Converts a BGX address to the node, interface and port number |
| 355 | * |
| 356 | * @param bgx_addr Address of CSR register |
| 357 | * |
| 358 | * @return node, interface and port number, will be -1 for invalid address. |
| 359 | */ |
| 360 | static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr) |
| 361 | { |
| 362 | struct cvmx_xiface xi = { -1, -1 }; |
| 363 | |
| 364 | xi.node = cvmx_csr_addr_to_node(bgx_addr); |
| 365 | bgx_addr = cvmx_csr_addr_strip_node(bgx_addr); |
| 366 | if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) { |
| 367 | debug("%s: Invalid BGX address 0x%llx\n", __func__, |
| 368 | (unsigned long long)bgx_addr); |
| 369 | xi.node = -1; |
| 370 | return xi; |
| 371 | } |
| 372 | xi.interface = (bgx_addr >> 24) & 0x0F; |
| 373 | |
| 374 | return xi; |
| 375 | } |
| 376 | |
| 377 | static int octeon_nic_probe(struct udevice *dev) |
| 378 | { |
| 379 | struct octeon_eth_info *info = dev_get_priv(dev); |
| 380 | struct ofnode_phandle_args phandle; |
| 381 | struct cvmx_xiface xi; |
| 382 | ofnode node, mdio_node; |
| 383 | int ipd_port; |
| 384 | int intf; |
| 385 | int ret; |
| 386 | |
| 387 | /* The empty stub is to keep cvmx_user_app_init() happy. */ |
| 388 | cvmx_npi_max_pknds = 1; |
| 389 | __cvmx_helper_init_port_valid(); |
| 390 | |
| 391 | xi = __cvmx_bgx_reg_addr_to_xiface(dev_read_addr(dev)); |
| 392 | intf = xi.interface; |
| 393 | debug("%s: Found BGX node %d, interface %d\n", __func__, xi.node, intf); |
| 394 | |
| 395 | ipd_port = cvmx_helper_get_ipd_port(intf, xi.node); |
| 396 | ret = octeon_eth_initialize(dev, intf, xi.node, ipd_port, |
| 397 | cvmx_helper_interface_get_mode(intf)); |
| 398 | |
| 399 | /* Move to subnode, as this includes the "phy-handle" */ |
| 400 | node = dev_read_first_subnode(dev); |
| 401 | |
| 402 | /* Check if an SPF module is conneted, then no MDIO is probed */ |
| 403 | ret = ofnode_parse_phandle_with_args(node, "sfp-slot", NULL, 0, 0, |
| 404 | &phandle); |
| 405 | if (!ret) { |
| 406 | dev_dbg(dev, "sfp-slot found, not probing for MDIO\n"); |
| 407 | return 0; |
| 408 | } |
| 409 | |
| 410 | /* Continue with MDIO probing */ |
| 411 | ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0, |
| 412 | &phandle); |
| 413 | if (ret) { |
| 414 | dev_err(dev, "phy-handle not found in subnode\n"); |
| 415 | return -ENODEV; |
| 416 | } |
| 417 | |
| 418 | /* Get MDIO node */ |
| 419 | mdio_node = ofnode_get_parent(phandle.node); |
| 420 | ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio_node, |
| 421 | &info->mdio_dev); |
| 422 | if (ret) { |
| 423 | dev_err(dev, "mdio_dev not found\n"); |
| 424 | return -ENODEV; |
| 425 | } |
| 426 | |
| 427 | return 0; |
| 428 | } |
| 429 | |
| 430 | /** |
| 431 | * Sets the hardware MAC address of the Ethernet device |
| 432 | * |
| 433 | * @param dev - Ethernet device |
| 434 | * |
| 435 | * @return 0 for success |
| 436 | */ |
| 437 | int octeon_eth_write_hwaddr(struct udevice *dev) |
| 438 | { |
| 439 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 440 | struct eth_pdata *pdata = dev_get_plat(dev); |
| 441 | |
| 442 | /* Skip if the interface isn't yet enabled */ |
| 443 | if (!oct_eth_info->enabled) { |
| 444 | debug("%s: Interface not enabled, not setting MAC address\n", |
| 445 | __func__); |
| 446 | return 0; |
| 447 | } |
| 448 | debug("%s: Setting %s address to %02x:%02x:%02x:%02x:%02x:%02x\n", |
| 449 | __func__, dev->name, pdata->enetaddr[0], pdata->enetaddr[1], |
| 450 | pdata->enetaddr[2], pdata->enetaddr[3], pdata->enetaddr[4], |
| 451 | pdata->enetaddr[5]); |
| 452 | return cvm_oct_set_mac_address(dev); |
| 453 | } |
| 454 | |
| 455 | /** |
| 456 | * Enables and disables the XCV RGMII interface |
| 457 | * |
| 458 | * @param interface Interface number |
| 459 | * @param index Port index (should be 0 for RGMII) |
| 460 | * @param enable True to enable it, false to disable it |
| 461 | */ |
| 462 | static void octeon_bgx_xcv_rgmii_enable(int interface, int index, bool enable) |
| 463 | { |
| 464 | union cvmx_xcv_reset xcv_reset; |
| 465 | |
| 466 | debug("%s(%d, %d, %sable)\n", __func__, interface, index, |
| 467 | enable ? "en" : "dis"); |
| 468 | xcv_reset.u64 = csr_rd(CVMX_XCV_RESET); |
| 469 | xcv_reset.s.rx_pkt_rst_n = enable ? 1 : 0; |
| 470 | csr_wr(CVMX_XCV_RESET, xcv_reset.u64); |
| 471 | } |
| 472 | |
| 473 | /** |
| 474 | * Enables a SGMII interface |
| 475 | * |
| 476 | * @param dev - Ethernet device to initialize |
| 477 | */ |
| 478 | void octeon_eth_sgmii_enable(struct udevice *dev) |
| 479 | { |
| 480 | struct octeon_eth_info *oct_eth_info; |
| 481 | cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| 482 | int index, interface; |
| 483 | cvmx_helper_interface_mode_t if_mode; |
| 484 | |
| 485 | oct_eth_info = dev_get_priv(dev); |
| 486 | interface = oct_eth_info->interface; |
| 487 | index = oct_eth_info->index; |
| 488 | |
| 489 | debug("%s(%s) (%d.%d)\n", __func__, dev->name, interface, index); |
| 490 | if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| 491 | cvmx_bgxx_cmrx_config_t cmr_config; |
| 492 | |
| 493 | cmr_config.u64 = |
| 494 | csr_rd(CVMX_BGXX_CMRX_CONFIG(index, interface)); |
| 495 | cmr_config.s.enable = 1; |
| 496 | cmr_config.s.data_pkt_tx_en = 1; |
| 497 | cmr_config.s.data_pkt_rx_en = 1; |
| 498 | csr_wr(CVMX_BGXX_CMRX_CONFIG(index, interface), cmr_config.u64); |
| 499 | mdelay(100); |
| 500 | if (cvmx_helper_bgx_is_rgmii(interface, index)) |
| 501 | octeon_bgx_xcv_rgmii_enable(interface, index, true); |
| 502 | } else { |
| 503 | if_mode = cvmx_helper_interface_get_mode(interface); |
| 504 | /* Normal operating mode. */ |
| 505 | |
| 506 | if (if_mode == CVMX_HELPER_INTERFACE_MODE_SGMII || |
| 507 | if_mode == CVMX_HELPER_INTERFACE_MODE_QSGMII) { |
| 508 | cvmx_pcsx_miscx_ctl_reg_t pcsx_miscx_ctl_reg; |
| 509 | |
| 510 | debug(" if mode: (Q)SGMII\n"); |
| 511 | pcsx_miscx_ctl_reg.u64 = csr_rd(CVMX_PCSX_MISCX_CTL_REG(index, interface)); |
| 512 | pcsx_miscx_ctl_reg.s.gmxeno = 0; |
| 513 | csr_wr(CVMX_PCSX_MISCX_CTL_REG(index, interface), |
| 514 | pcsx_miscx_ctl_reg.u64); |
| 515 | } else if (if_mode != CVMX_HELPER_INTERFACE_MODE_AGL) { |
| 516 | cvmx_pcsxx_misc_ctl_reg_t pcsxx_misc_ctl_reg; |
| 517 | |
| 518 | debug(" if mode: AGM\n"); |
| 519 | pcsxx_misc_ctl_reg.u64 = |
| 520 | csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface)); |
| 521 | pcsxx_misc_ctl_reg.s.gmxeno = 0; |
| 522 | csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface), |
| 523 | pcsxx_misc_ctl_reg.u64); |
| 524 | } |
| 525 | |
| 526 | gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| 527 | gmx_cfg.s.en = 1; |
| 528 | csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64); |
| 529 | gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| 530 | } |
| 531 | } |
| 532 | |
| 533 | /** |
| 534 | * Enables an Ethernet interface |
| 535 | * |
| 536 | * @param dev - Ethernet device to enable |
| 537 | */ |
| 538 | void octeon_eth_enable(struct udevice *dev) |
| 539 | { |
| 540 | struct octeon_eth_info *oct_eth_info; |
| 541 | u64 tmp; |
| 542 | int interface; |
| 543 | cvmx_helper_interface_mode_t if_mode; |
| 544 | |
| 545 | oct_eth_info = dev_get_priv(dev); |
| 546 | interface = oct_eth_info->interface; |
| 547 | if_mode = cvmx_helper_interface_get_mode(interface); |
| 548 | |
| 549 | switch (if_mode) { |
| 550 | case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| 551 | case CVMX_HELPER_INTERFACE_MODE_GMII: |
| 552 | debug(" rgmii/gmii mode\n"); |
| 553 | tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface)); |
| 554 | tmp |= (1ull << (oct_eth_info->port & 0x3)); |
| 555 | csr_wr(CVMX_ASXX_RX_PRT_EN(interface), tmp); |
| 556 | tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface)); |
| 557 | tmp |= (1ull << (oct_eth_info->port & 0x3)); |
| 558 | csr_wr(CVMX_ASXX_TX_PRT_EN(interface), tmp); |
| 559 | octeon_eth_write_hwaddr(dev); |
| 560 | break; |
| 561 | |
| 562 | case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| 563 | case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| 564 | case CVMX_HELPER_INTERFACE_MODE_RXAUI: |
| 565 | case CVMX_HELPER_INTERFACE_MODE_XLAUI: |
| 566 | case CVMX_HELPER_INTERFACE_MODE_XFI: |
| 567 | case CVMX_HELPER_INTERFACE_MODE_10G_KR: |
| 568 | case CVMX_HELPER_INTERFACE_MODE_40G_KR4: |
| 569 | case CVMX_HELPER_INTERFACE_MODE_MIXED: |
| 570 | case CVMX_HELPER_INTERFACE_MODE_AGL: |
| 571 | debug(" SGMII/XAUI/etc.\n"); |
| 572 | octeon_eth_sgmii_enable(dev); |
| 573 | octeon_eth_write_hwaddr(dev); |
| 574 | break; |
| 575 | |
| 576 | default: |
| 577 | break; |
| 578 | } |
| 579 | } |
| 580 | |
| 581 | void octeon_phy_port_check(struct udevice *dev) |
| 582 | { |
| 583 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 584 | struct phy_device *phydev = oct_eth_info->phydev; |
| 585 | |
| 586 | if (oct_eth_info->phy_port_check) |
| 587 | oct_eth_info->phy_port_check(phydev); |
| 588 | } |
| 589 | |
| 590 | /** |
| 591 | * Configure the RGMII port for the negotiated speed |
| 592 | * |
| 593 | * @param dev Linux device for the RGMII port |
| 594 | */ |
| 595 | static void cvm_oct_configure_rgmii_speed(struct udevice *dev) |
| 596 | { |
| 597 | struct octeon_eth_info *priv = dev_get_priv(dev); |
| 598 | int port = priv->port; |
| 599 | cvmx_helper_link_info_t link_state = cvmx_helper_link_get(port); |
| 600 | |
| 601 | /* If the port is down some PHYs we need to check modules, etc. */ |
| 602 | if (!link_state.s.link_up) |
| 603 | octeon_phy_port_check(dev); |
| 604 | |
| 605 | if (link_state.u64 != priv->link_state) { |
| 606 | cvmx_helper_interface_mode_t mode; |
| 607 | |
| 608 | octeon_phy_port_check(dev); |
| 609 | |
| 610 | debug("%s(%s): Link state changed\n", __func__, dev->name); |
| 611 | printf("%s: ", dev->name); |
| 612 | if (!link_state.s.link_up) { |
| 613 | puts("Down "); |
| 614 | } else { |
| 615 | printf("Up %d Mbps ", link_state.s.speed); |
| 616 | if (link_state.s.full_duplex) |
| 617 | puts("Full duplex "); |
| 618 | else |
| 619 | puts("Half duplex "); |
| 620 | } |
| 621 | mode = cvmx_helper_interface_get_mode(priv->interface); |
| 622 | printf("(port %2d) (%s)\n", port, |
| 623 | cvmx_helper_interface_mode_to_string(mode)); |
| 624 | debug("%s: Setting link state\n", __func__); |
| 625 | cvmx_helper_link_set(priv->port, link_state); |
| 626 | priv->link_state = link_state.u64; |
| 627 | } |
| 628 | } |
| 629 | |
| 630 | #if defined(DEBUG_TX_PACKET) || defined(DEBUG_RX_PACKET) |
| 631 | static void print_mac(const char *label, const uint8_t *mac_addr) |
| 632 | { |
| 633 | printf("%s: %02x:%02x:%02x:%02x:%02x:%02x", label, mac_addr[0], |
| 634 | mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]); |
| 635 | } |
| 636 | |
| 637 | static void print_ip(const void *packet) |
| 638 | { |
| 639 | u8 *p = (uint8_t *)packet; |
| 640 | u16 length; |
| 641 | u8 hdr_len; |
| 642 | |
| 643 | puts("IP Header:\n"); |
| 644 | if ((p[0] & 0xF0) != 0x40) { |
| 645 | printf("Invalid IP version %d\n", *p >> 4); |
| 646 | return; |
| 647 | } |
| 648 | hdr_len = *p & 0x0F; |
| 649 | if (hdr_len < 5) |
| 650 | printf("Invalid IP header length %d\n", hdr_len); |
| 651 | printf(" Version: 4, Header length: %d\n", hdr_len); |
| 652 | length = (p[2] << 8) | p[3]; |
| 653 | printf(" TOS: 0x%02x, length: %d\n", p[1], length); |
| 654 | printf(" ID: %d, %s%s%s fragment offset: %d\n", (p[4] << 8) | p[5], |
| 655 | p[6] & 0x80 ? "congested, " : "", p[6] & 0x40 ? "DF, " : "", |
| 656 | p[6] & 0x20 ? "MF, " : "", ((p[6] & 0x1F) << 8) | p[7]); |
| 657 | printf(" TTL: %d, Protocol: %d, Header Checksum: 0x%x\n", p[8], p[9], |
| 658 | (p[10] << 8) | p[11]); |
| 659 | printf(" Source IP: %d.%d.%d.%d\n Destination IP: %d.%d.%d.%d\n", |
| 660 | p[12], p[13], p[14], p[15], p[16], p[17], p[18], p[19]); |
| 661 | if (p[9] == 17 || p[9] == 6) |
| 662 | printf(" Source port: %u, Destination port: %u\n", |
| 663 | (p[20] << 8) | p[21], (p[22] << 8) | p[23]); |
| 664 | puts("\n"); |
| 665 | } |
| 666 | |
| 667 | /** |
| 668 | * Prints out a packet for debugging purposes |
| 669 | * |
| 670 | * @param[in] packet - pointer to packet data |
| 671 | * @param length - length of packet in bytes |
| 672 | */ |
| 673 | static void print_packet(const void *packet, int length) |
| 674 | { |
| 675 | int i, j; |
| 676 | const unsigned char *up = packet; |
| 677 | u16 type = (up[12] << 8 | up[13]); |
| 678 | int start = 14; |
| 679 | |
| 680 | print_mac("DMAC", &up[0]); |
| 681 | puts(" "); |
| 682 | print_mac("SMAC", &up[6]); |
| 683 | printf(" TYPE: %04x\n", type); |
| 684 | |
| 685 | if (type == 0x0800) |
| 686 | print_ip(&up[start]); |
| 687 | |
| 688 | for (i = start; (i + 16) < length; i += 16) { |
| 689 | printf("%04x ", i); |
| 690 | for (j = 0; j < 16; ++j) |
| 691 | printf("%02x ", up[i + j]); |
| 692 | |
| 693 | printf(" "); |
| 694 | for (j = 0; j < 16; ++j) |
| 695 | printf("%c", |
| 696 | ((up[i + j] >= ' ') && (up[i + j] <= '~')) ? |
| 697 | up[i + j] : |
| 698 | '.'); |
| 699 | printf("\n"); |
| 700 | } |
| 701 | printf("%04x ", i); |
| 702 | for (j = 0; i + j < length; ++j) |
| 703 | printf("%02x ", up[i + j]); |
| 704 | |
| 705 | for (; j < 16; ++j) |
| 706 | printf(" "); |
| 707 | |
| 708 | printf(" "); |
| 709 | for (j = 0; i + j < length; ++j) |
| 710 | printf("%c", ((up[i + j] >= ' ') && (up[i + j] <= '~')) ? |
| 711 | up[i + j] : |
| 712 | '.'); |
| 713 | |
| 714 | printf("\n"); |
| 715 | } |
| 716 | #endif |
| 717 | |
| 718 | /** |
| 719 | * String representation of error codes. |
| 720 | */ |
| 721 | static const char * const rx_error_codes[] = { |
| 722 | "OK", |
| 723 | "partial", |
| 724 | "jabber", |
| 725 | "overrun", |
| 726 | "oversize", |
| 727 | "alignment", |
| 728 | "fragment", |
| 729 | "fcs", |
| 730 | "undersize", |
| 731 | "extend", |
| 732 | "length mismatch", |
| 733 | "rgmii rx", |
| 734 | "skip error", |
| 735 | "nibble error (studder)", |
| 736 | "(undefined)", |
| 737 | "(undefined)", |
| 738 | "SPI 4.2 FCS", |
| 739 | "skip", |
| 740 | "L2 malformed", |
| 741 | }; |
| 742 | |
| 743 | /** |
| 744 | * Called to receive a packet |
| 745 | * |
| 746 | * @param dev - device to receive on |
| 747 | * |
| 748 | * @return - length of packet |
| 749 | * |
| 750 | * This function is used to poll packets. In turn it calls NetReceive |
| 751 | * to process the packets. |
| 752 | */ |
| 753 | static int nic_recv(struct udevice *dev, int flags, uchar **packetp) |
| 754 | { |
| 755 | cvmx_wqe_t *work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); |
| 756 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 757 | cvmx_buf_ptr_t buf_ptr; |
| 758 | void *packet_data; |
| 759 | int length; |
| 760 | int error_code; |
| 761 | |
| 762 | if (!oct_eth_info->enabled) { |
| 763 | oct_eth_info->enabled = 1; |
| 764 | debug("%s: Enabling interface %s\n", __func__, dev->name); |
| 765 | octeon_eth_enable(dev); |
| 766 | } |
| 767 | |
| 768 | if (!work) { |
| 769 | /* |
| 770 | * Somtimes the link is not up yet. Return here in this |
| 771 | * case, this function will be called again later. |
| 772 | */ |
| 773 | return 0; |
| 774 | } |
| 775 | |
| 776 | error_code = cvmx_wqe_get_rcv_err(work); |
| 777 | if (error_code) { |
| 778 | /* Work has error, so drop */ |
| 779 | cvmx_helper_free_packet_data(work); |
| 780 | cvmx_wqe_free(work); |
| 781 | if (error_code < ARRAY_SIZE(rx_error_codes) && |
| 782 | !octeon_has_feature(OCTEON_FEATURE_BGX)) |
| 783 | printf("Receive error (code %d: %s), dropping\n", |
| 784 | error_code, rx_error_codes[error_code]); |
| 785 | else |
| 786 | printf("Receive error (code %d (unknown), dropping\n", |
| 787 | error_code); |
| 788 | return 0; |
| 789 | } |
| 790 | if (cvmx_wqe_get_bufs(work) != 1) { |
| 791 | /* can only support single-buffer packets */ |
| 792 | printf("Abnormal packet received in %u bufs, dropping\n", |
| 793 | cvmx_wqe_get_bufs(work)); |
| 794 | length = cvmx_wqe_get_len(work); |
| 795 | buf_ptr = cvmx_wqe_get_packet_ptr(work); |
| 796 | packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr); |
| 797 | print_packet(packet_data, length); |
| 798 | cvmx_helper_free_packet_data(work); |
| 799 | cvmx_wqe_free(work); |
| 800 | return 0; |
| 801 | } |
| 802 | |
| 803 | buf_ptr = cvmx_wqe_get_packet_ptr(work); |
| 804 | packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr); |
| 805 | length = cvmx_wqe_get_len(work); |
| 806 | |
| 807 | oct_eth_info->packets_received++; |
| 808 | debug("############# got work: %p, len: %d, packet_ptr: %p\n", work, |
| 809 | length, packet_data); |
| 810 | #if defined(DEBUG_RX_PACKET) |
| 811 | if (packet_rx_debug) { |
| 812 | printf("\nRX packet: interface: %d, index: %d\n", |
| 813 | oct_eth_info->interface, oct_eth_info->index); |
| 814 | print_packet(packet_data, length); |
| 815 | } |
| 816 | #endif |
| 817 | *packetp = (uchar *)packet_data; |
| 818 | |
| 819 | /* Save work for free_pkt() */ |
| 820 | oct_eth_info->work = work; |
| 821 | |
| 822 | /* Free WQE and packet data */ |
| 823 | return length; |
| 824 | } |
| 825 | |
| 826 | static int nic_free_pkt(struct udevice *dev, uchar *pkt, int pkt_len) |
| 827 | { |
| 828 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 829 | cvmx_wqe_t *work = oct_eth_info->work; |
| 830 | |
| 831 | if (!work) |
| 832 | return 0; |
| 833 | |
| 834 | cvmx_helper_free_packet_data(work); |
| 835 | cvmx_wqe_free(work); |
| 836 | oct_eth_info->work = NULL; |
| 837 | |
| 838 | return 0; |
| 839 | } |
| 840 | |
| 841 | /** |
| 842 | * Packet transmit |
| 843 | * |
| 844 | * @param skb Packet to send |
| 845 | * @param dev Device info structure |
| 846 | * @return Always returns zero |
| 847 | */ |
| 848 | static int cvm_oct_xmit(struct udevice *dev, void *packet, int len) |
| 849 | { |
| 850 | struct octeon_eth_info *priv = dev_get_priv(dev); |
| 851 | int queue = cvmx_pko_get_base_queue(priv->port); |
| 852 | cvmx_pko_command_word0_t pko_command; |
| 853 | cvmx_buf_ptr_t hw_buffer; |
| 854 | int rv; |
| 855 | |
| 856 | debug("%s: addr: %p, len: %d\n", __func__, packet, len); |
| 857 | |
| 858 | hw_buffer.u64 = 0; |
| 859 | hw_buffer.s.addr = cvmx_ptr_to_phys(packet); |
| 860 | hw_buffer.s.pool = CVMX_FPA_PACKET_POOL; |
| 861 | hw_buffer.s.size = len; |
| 862 | hw_buffer.s.back = 0; |
| 863 | |
| 864 | /* Build the PKO command */ |
| 865 | pko_command.u64 = 0; |
| 866 | pko_command.s.subone0 = 1; |
| 867 | pko_command.s.dontfree = 0; |
| 868 | pko_command.s.segs = 1; |
| 869 | pko_command.s.total_bytes = len; |
| 870 | /* Send the packet to the output queue */ |
| 871 | |
| 872 | debug("%s: port: %d, queue: %d\n", __func__, priv->port, queue); |
| 873 | cvmx_pko_send_packet_prepare(priv->port, queue, 0); |
| 874 | rv = cvmx_pko_send_packet_finish(priv->port, queue, pko_command, |
| 875 | hw_buffer, 0); |
| 876 | if (rv) |
| 877 | printf("Failed to send the packet rv=%d\n", rv); |
| 878 | |
| 879 | return 0; |
| 880 | } |
| 881 | |
| 882 | static int nic_xmit(struct udevice *dev, void *pkt, int pkt_len) |
| 883 | { |
| 884 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 885 | void *fpa_buf = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL); |
| 886 | |
| 887 | if (!oct_eth_info->enabled) { |
| 888 | oct_eth_info->enabled = 1; |
| 889 | octeon_eth_enable(dev); |
| 890 | } |
| 891 | |
| 892 | /* We need to copy this to a FPA buffer, then give that to TX */ |
| 893 | |
| 894 | if (oct_eth_info->packets_sent == 0 && |
| 895 | !octeon_has_feature(OCTEON_FEATURE_BGX)) |
| 896 | cvm_oct_configure_rgmii_speed(dev); |
| 897 | |
| 898 | if (!fpa_buf) { |
| 899 | printf("ERROR allocating buffer for packet!\n"); |
| 900 | return -1; |
| 901 | } |
| 902 | |
| 903 | memcpy(fpa_buf, pkt, pkt_len); |
| 904 | #ifdef DEBUG_TX_PACKET |
| 905 | if (packet_tx_debug) { |
| 906 | printf("\nTX packet: interface: %d, index: %d\n", |
| 907 | oct_eth_info->interface, oct_eth_info->index); |
| 908 | print_packet(pkt, pkt_len); |
| 909 | } |
| 910 | #endif |
| 911 | cvm_oct_xmit(dev, fpa_buf, pkt_len); |
| 912 | oct_eth_info->packets_sent++; |
| 913 | |
| 914 | return 0; |
| 915 | } |
| 916 | |
| 917 | int nic_open(struct udevice *dev) |
| 918 | { |
| 919 | octeon_eth_init(dev); |
| 920 | |
| 921 | return 0; |
| 922 | } |
| 923 | |
| 924 | static void octeon_eth_halt_bgx(struct udevice *dev, |
| 925 | cvmx_helper_interface_mode_t mode) |
| 926 | { |
| 927 | union cvmx_bgxx_cmrx_config cmr_config; |
| 928 | union cvmx_bgxx_cmr_rx_adrx_cam cmr_cam; |
| 929 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 930 | int index = oct_eth_info->index; |
| 931 | int xiface = oct_eth_info->interface; |
| 932 | struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); |
| 933 | |
| 934 | debug("%s(%s(%d.%d), %d)\n", __func__, dev->name, xiface, index, mode); |
| 935 | |
| 936 | /* For RGMII we need to properly shut down the XCV interface */ |
| 937 | if (cvmx_helper_bgx_is_rgmii(xiface, index)) { |
| 938 | debug(" Shut down XCV RGMII\n"); |
| 939 | octeon_bgx_xcv_rgmii_enable(xi.interface, index, false); |
| 940 | } else { |
| 941 | cmr_config.u64 = csr_rd_node(xi.node, |
| 942 | CVMX_BGXX_CMRX_CONFIG(index, xi.interface)); |
| 943 | cmr_config.s.data_pkt_tx_en = 0; |
| 944 | cmr_config.s.data_pkt_rx_en = 0; |
| 945 | csr_wr_node(xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface), |
| 946 | cmr_config.u64); |
| 947 | |
| 948 | cmr_cam.u64 = csr_rd_node(xi.node, |
| 949 | CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface)); |
| 950 | cmr_cam.s.en = 0; |
| 951 | csr_wr_node(xi.node, |
| 952 | CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface), |
| 953 | cmr_cam.u64); |
| 954 | oct_eth_info->last_bgx_mac = 0; |
| 955 | oct_eth_info->bgx_mac_set = 0; |
| 956 | } |
| 957 | } |
| 958 | |
| 959 | /** |
| 960 | * Halts the specified Ethernet interface preventing it from receiving any more |
| 961 | * packets. |
| 962 | * |
| 963 | * @param dev - Ethernet device to shut down. |
| 964 | */ |
| 965 | void octeon_eth_halt(struct udevice *dev) |
| 966 | { |
| 967 | struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| 968 | int index = oct_eth_info->index; |
| 969 | int interface = oct_eth_info->interface; |
| 970 | cvmx_helper_interface_mode_t mode; |
| 971 | union cvmx_gmxx_rxx_adr_ctl adr_ctl; |
| 972 | cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| 973 | u64 tmp; |
| 974 | |
| 975 | debug("%s(%s): Halting\n", __func__, dev->name); |
| 976 | |
| 977 | oct_eth_info->enabled = 0; |
| 978 | |
| 979 | mode = cvmx_helper_interface_get_mode(oct_eth_info->interface); |
| 980 | if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| 981 | octeon_eth_halt_bgx(dev, mode); |
| 982 | return; |
| 983 | } |
| 984 | |
| 985 | /* Stop SCC */ |
| 986 | /* Disable reception on this port at the GMX block */ |
| 987 | switch (mode) { |
| 988 | case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| 989 | case CVMX_HELPER_INTERFACE_MODE_GMII: |
| 990 | debug(" RGMII/GMII\n"); |
| 991 | tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface)); |
| 992 | tmp &= ~(1ull << index); |
| 993 | /* Disable the RGMII RX ports */ |
| 994 | csr_wr(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface), tmp); |
| 995 | tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface)); |
| 996 | tmp &= ~(1ull << index); |
| 997 | /* Disable the RGMII TX ports */ |
| 998 | csr_wr(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface), tmp); |
| 999 | /* No break! */ |
| 1000 | case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| 1001 | case CVMX_HELPER_INTERFACE_MODE_QSGMII: |
| 1002 | case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| 1003 | case CVMX_HELPER_INTERFACE_MODE_RXAUI: |
| 1004 | case CVMX_HELPER_INTERFACE_MODE_XLAUI: |
| 1005 | case CVMX_HELPER_INTERFACE_MODE_XFI: |
| 1006 | case CVMX_HELPER_INTERFACE_MODE_10G_KR: |
| 1007 | case CVMX_HELPER_INTERFACE_MODE_40G_KR4: |
| 1008 | case CVMX_HELPER_INTERFACE_MODE_MIXED: |
| 1009 | case CVMX_HELPER_INTERFACE_MODE_AGL: |
| 1010 | /* Disable MAC filtering */ |
| 1011 | gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| 1012 | csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, |
| 1013 | gmx_cfg.u64 & ~1ull); |
| 1014 | adr_ctl.u64 = 0; |
| 1015 | adr_ctl.s.bcst = 1; /* Reject broadcast */ |
| 1016 | csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CTL, adr_ctl.u64); |
| 1017 | csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CAM_EN, 0); |
| 1018 | csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64); |
| 1019 | break; |
| 1020 | default: |
| 1021 | printf("%s: Unknown mode %d for interface 0x%x:%d\n", __func__, |
| 1022 | mode, interface, index); |
| 1023 | break; |
| 1024 | } |
| 1025 | } |
| 1026 | |
| 1027 | void nic_stop(struct udevice *dev) |
| 1028 | { |
| 1029 | octeon_eth_halt(dev); |
| 1030 | } |
| 1031 | |
| 1032 | int nic_write_hwaddr(struct udevice *dev) |
| 1033 | { |
| 1034 | cvm_oct_set_mac_address(dev); |
| 1035 | |
| 1036 | return 0; |
| 1037 | } |
| 1038 | |
| 1039 | static const struct eth_ops octeon_nic_ops = { |
| 1040 | .start = nic_open, |
| 1041 | .stop = nic_stop, |
| 1042 | .send = nic_xmit, |
| 1043 | .recv = nic_recv, |
| 1044 | .free_pkt = nic_free_pkt, |
| 1045 | .write_hwaddr = nic_write_hwaddr, |
| 1046 | }; |
| 1047 | |
| 1048 | static const struct udevice_id octeon_nic_ids[] = { |
| 1049 | { .compatible = "cavium,octeon-7890-bgx" }, |
| 1050 | {} |
| 1051 | }; |
| 1052 | |
| 1053 | U_BOOT_DRIVER(octeon_nic) = { |
| 1054 | .name = "octeon_nic", |
| 1055 | .id = UCLASS_ETH, |
| 1056 | .probe = octeon_nic_probe, |
| 1057 | .of_match = octeon_nic_ids, |
| 1058 | .ops = &octeon_nic_ops, |
| 1059 | .priv_auto = sizeof(struct octeon_eth_info), |
| 1060 | }; |