blob: 821e1f85a4d3b91168399e37dbc24634c079020e [file] [log] [blame]
wdenke85390d2002-04-01 14:29:03 +00001/*
2 * (C) Copyright 2001
3 * Denis Peter, MPL AG Switzerland
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 *
24 * Most of these definitions are derived from
25 * linux/drivers/scsi/sym53c8xx_defs.h
26 *
27 */
28
29#ifndef _SYM53C8XX_DEFS_H
30#define _SYM53C8XX_DEFS_H
31
32
33#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
34
35#define SCNTL1 0x01 /* no reset */
36 #define ISCON 0x10 /* connected to scsi */
37 #define CRST 0x08 /* force reset */
38 #define IARB 0x02 /* immediate arbitration */
39
40#define SCNTL2 0x02 /* no disconnect expected */
41 #define SDU 0x80 /* cmd: disconnect will raise error */
42 #define CHM 0x40 /* sta: chained mode */
43 #define WSS 0x08 /* sta: wide scsi send [W]*/
44 #define WSR 0x01 /* sta: wide scsi received [W]*/
45
46#define SCNTL3 0x03 /* cnf system clock dependent */
47 #define EWS 0x08 /* cmd: enable wide scsi [W]*/
48 #define ULTRA 0x80 /* cmd: ULTRA enable */
49 /* bits 0-2, 7 rsvd for C1010 */
50
51#define SCID 0x04 /* cnf host adapter scsi address */
52 #define RRE 0x40 /* r/w:e enable response to resel. */
53 #define SRE 0x20 /* r/w:e enable response to select */
54
55#define SXFER 0x05 /* ### Sync speed and count */
56 /* bits 6-7 rsvd for C1010 */
57
58#define SDID 0x06 /* ### Destination-ID */
59
60#define GPREG 0x07 /* ??? IO-Pins */
61
62#define SFBR 0x08 /* ### First byte in phase */
63
64#define SOCL 0x09
65 #define CREQ 0x80 /* r/w: SCSI-REQ */
66 #define CACK 0x40 /* r/w: SCSI-ACK */
67 #define CBSY 0x20 /* r/w: SCSI-BSY */
68 #define CSEL 0x10 /* r/w: SCSI-SEL */
69 #define CATN 0x08 /* r/w: SCSI-ATN */
70 #define CMSG 0x04 /* r/w: SCSI-MSG */
71 #define CC_D 0x02 /* r/w: SCSI-C_D */
72 #define CI_O 0x01 /* r/w: SCSI-I_O */
73
74#define SSID 0x0a
75
76#define SBCL 0x0b
77
78#define DSTAT 0x0c
79 #define DFE 0x80 /* sta: dma fifo empty */
80 #define MDPE 0x40 /* int: master data parity error */
81 #define BF 0x20 /* int: script: bus fault */
82 #define ABRT 0x10 /* int: script: command aborted */
83 #define SSI 0x08 /* int: script: single step */
84 #define SIR 0x04 /* int: script: interrupt instruct. */
85 #define IID 0x01 /* int: script: illegal instruct. */
86
87#define SSTAT0 0x0d
88 #define ILF 0x80 /* sta: data in SIDL register lsb */
89 #define ORF 0x40 /* sta: data in SODR register lsb */
90 #define OLF 0x20 /* sta: data in SODL register lsb */
91 #define AIP 0x10 /* sta: arbitration in progress */
92 #define LOA 0x08 /* sta: arbitration lost */
93 #define WOA 0x04 /* sta: arbitration won */
94 #define IRST 0x02 /* sta: scsi reset signal */
95 #define SDP 0x01 /* sta: scsi parity signal */
96
97#define SSTAT1 0x0e
98 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
99
100#define SSTAT2 0x0f
101 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
102 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
103 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
104 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
105 #define LDSC 0x02 /* sta: disconnect & reconnect */
106
107#define DSA 0x10 /* --> Base page */
108#define DSA1 0x11
109#define DSA2 0x12
110#define DSA3 0x13
111
112#define ISTAT 0x14 /* --> Main Command and status */
113 #define CABRT 0x80 /* cmd: abort current operation */
114 #define SRST 0x40 /* mod: reset chip */
115 #define SIGP 0x20 /* r/w: message from host to ncr */
116 #define SEM 0x10 /* r/w: message between host + ncr */
117 #define CON 0x08 /* sta: connected to scsi */
118 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
119 #define SIP 0x02 /* sta: scsi-interrupt */
120 #define DIP 0x01 /* sta: host/script interrupt */
121
122
123#define CTEST0 0x18
124#define CTEST1 0x19
125#define CTEST2 0x1a
126 #define CSIGP 0x40
127 /* bits 0-2,7 rsvd for C1010 */
128
129#define CTEST3 0x1b
130 #define FLF 0x08 /* cmd: flush dma fifo */
131 #define CLF 0x04 /* cmd: clear dma fifo */
132 #define FM 0x02 /* mod: fetch pin mode */
133 #define WRIE 0x01 /* mod: write and invalidate enable */
134 /* bits 4-7 rsvd for C1010 */
135
136#define DFIFO 0x20
137#define CTEST4 0x21
138 #define BDIS 0x80 /* mod: burst disable */
139 #define MPEE 0x08 /* mod: master parity error enable */
140
141#define CTEST5 0x22
142 #define DFS 0x20 /* mod: dma fifo size */
143 /* bits 0-1, 3-7 rsvd for C1010 */
144#define CTEST6 0x23
145
146#define DBC 0x24 /* ### Byte count and command */
147#define DNAD 0x28 /* ### Next command register */
148#define DSP 0x2c /* --> Script Pointer */
149#define DSPS 0x30 /* --> Script pointer save/opcode#2 */
150
151#define SCRATCHA 0x34 /* Temporary register a */
152#define SCRATCHA1 0x35
153#define SCRATCHA2 0x36
154#define SCRATCHA3 0x37
155
156#define DMODE 0x38
157 #define BL_2 0x80 /* mod: burst length shift value +2 */
158 #define BL_1 0x40 /* mod: burst length shift value +1 */
159 #define ERL 0x08 /* mod: enable read line */
160 #define ERMP 0x04 /* mod: enable read multiple */
161 #define BOF 0x02 /* mod: burst op code fetch */
162 #define MAN 0x01 /* mod: manual start */
163
164#define DIEN 0x39
165#define SBR 0x3a
166
167#define DCNTL 0x3b /* --> Script execution control */
168 #define CLSE 0x80 /* mod: cache line size enable */
169 #define PFF 0x40 /* cmd: pre-fetch flush */
170 #define PFEN 0x20 /* mod: pre-fetch enable */
171 #define SSM 0x10 /* mod: single step mode */
172 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
173 #define STD 0x04 /* cmd: start dma mode */
174 #define IRQD 0x02 /* mod: irq disable */
175 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
176 /* bits 0-1 rsvd for C1010 */
177
178#define ADDER 0x3c
179
180#define SIEN 0x40 /* -->: interrupt enable */
181#define SIST 0x42 /* <--: interrupt status */
182 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
183 #define STO 0x0400/* sta: timeout (select) */
184 #define GEN 0x0200/* sta: timeout (general) */
185 #define HTH 0x0100/* sta: timeout (handshake) */
186 #define MA 0x80 /* sta: phase mismatch */
187 #define CMP 0x40 /* sta: arbitration complete */
188 #define SEL 0x20 /* sta: selected by another device */
189 #define RSL 0x10 /* sta: reselected by another device*/
190 #define SGE 0x08 /* sta: gross error (over/underflow)*/
191 #define UDC 0x04 /* sta: unexpected disconnect */
192 #define RST 0x02 /* sta: scsi bus reset detected */
193 #define PAR 0x01 /* sta: scsi parity error */
194
195#define SLPAR 0x44
196#define SWIDE 0x45
197#define MACNTL 0x46
198#define GPCNTL 0x47
199#define STIME0 0x48 /* cmd: timeout for select&handshake*/
200#define STIME1 0x49 /* cmd: timeout user defined */
201#define RESPID 0x4a /* sta: Reselect-IDs */
202
203#define STEST0 0x4c
204
205#define STEST1 0x4d
206 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
207 #define DBLEN 0x08 /* clock doubler running */
208 #define DBLSEL 0x04 /* clock doubler selected */
209
210
211#define STEST2 0x4e
212 #define ROF 0x40 /* reset scsi offset (after gross error!) */
213 #define EXT 0x02 /* extended filtering */
214
215#define STEST3 0x4f
216 #define TE 0x80 /* c: tolerAnt enable */
217 #define HSC 0x20 /* c: Halt SCSI Clock */
218 #define CSF 0x02 /* c: clear scsi fifo */
219
220#define SIDL 0x50 /* Lowlevel: latched from scsi data */
221#define STEST4 0x52
222 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
223 #define SMODE_HVD 0x40 /* High Voltage Differential */
224 #define SMODE_SE 0x80 /* Single Ended */
225 #define SMODE_LVD 0xc0 /* Low Voltage Differential */
226 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
227 /* bits 0-5 rsvd for C1010 */
228
229#define SODL 0x54 /* Lowlevel: data out to scsi data */
230
231#define SBDL 0x58 /* Lowlevel: data from scsi data */
232
233
234
235
236/*-----------------------------------------------------------
237**
238** Utility macros for the script.
239**
240**-----------------------------------------------------------
241*/
242
243#define REG(r) (r)
244
245/*-----------------------------------------------------------
246**
247** SCSI phases
248**
249** DT phases illegal for ncr driver.
250**
251**-----------------------------------------------------------
252*/
253
254#define SCR_DATA_OUT 0x00000000
255#define SCR_DATA_IN 0x01000000
256#define SCR_COMMAND 0x02000000
257#define SCR_STATUS 0x03000000
258#define SCR_DT_DATA_OUT 0x04000000
259#define SCR_DT_DATA_IN 0x05000000
260#define SCR_MSG_OUT 0x06000000
261#define SCR_MSG_IN 0x07000000
262
263#define SCR_ILG_OUT 0x04000000
264#define SCR_ILG_IN 0x05000000
265
266/*-----------------------------------------------------------
267**
268** Data transfer via SCSI.
269**
270**-----------------------------------------------------------
271**
272** MOVE_ABS (LEN)
273** <<start address>>
274**
275** MOVE_IND (LEN)
276** <<dnad_offset>>
277**
278** MOVE_TBL
279** <<dnad_offset>>
280**
281**-----------------------------------------------------------
282*/
283
284#define OPC_MOVE 0x08000000
285
286#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
287#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
288#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
289
290#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
291#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
292#define SCR_CHMOV_TBL (0x10000000)
293
294
295/*-----------------------------------------------------------
296**
297** Selection
298**
299**-----------------------------------------------------------
300**
301** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
302** <<alternate_address>>
303**
304** SEL_TBL | << dnad_offset>> [ | REL_JMP]
305** <<alternate_address>>
306**
307**-----------------------------------------------------------
308*/
309
310#define SCR_SEL_ABS 0x40000000
311#define SCR_SEL_ABS_ATN 0x41000000
312#define SCR_SEL_TBL 0x42000000
313#define SCR_SEL_TBL_ATN 0x43000000
314
315
316#define SCR_JMP_REL 0x04000000
317#define SCR_ID(id) (((unsigned long)(id)) << 16)
318
319/*-----------------------------------------------------------
320**
321** Waiting for Disconnect or Reselect
322**
323**-----------------------------------------------------------
324**
325** WAIT_DISC
326** dummy: <<alternate_address>>
327**
328** WAIT_RESEL
329** <<alternate_address>>
330**
331**-----------------------------------------------------------
332*/
333
334#define SCR_WAIT_DISC 0x48000000
335#define SCR_WAIT_RESEL 0x50000000
336
337/*-----------------------------------------------------------
338**
339** Bit Set / Reset
340**
341**-----------------------------------------------------------
342**
343** SET (flags {|.. })
344**
345** CLR (flags {|.. })
346**
347**-----------------------------------------------------------
348*/
349
350#define SCR_SET(f) (0x58000000 | (f))
351#define SCR_CLR(f) (0x60000000 | (f))
352
353#define SCR_CARRY 0x00000400
354#define SCR_TRG 0x00000200
355#define SCR_ACK 0x00000040
356#define SCR_ATN 0x00000008
357
358
359
360
361/*-----------------------------------------------------------
362**
363** Memory to memory move
364**
365**-----------------------------------------------------------
366**
367** COPY (bytecount)
368** << source_address >>
369** << destination_address >>
370**
371** SCR_COPY sets the NO FLUSH option by default.
372** SCR_COPY_F does not set this option.
373**
374** For chips which do not support this option,
375** ncr_copy_and_bind() will remove this bit.
376**-----------------------------------------------------------
377*/
378
379#define SCR_NO_FLUSH 0x01000000
380
381#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
382#define SCR_COPY_F(n) (0xc0000000 | (n))
383
384/*-----------------------------------------------------------
385**
386** Register move and binary operations
387**
388**-----------------------------------------------------------
389**
390** SFBR_REG (reg, op, data) reg = SFBR op data
391** << 0 >>
392**
393** REG_SFBR (reg, op, data) SFBR = reg op data
394** << 0 >>
395**
396** REG_REG (reg, op, data) reg = reg op data
397** << 0 >>
398**
399**-----------------------------------------------------------
400** On 810A, 860, 825A, 875, 895 and 896 chips the content
401** of SFBR register can be used as data (SCR_SFBR_DATA).
402** The 896 has additionnal IO registers starting at
403** offset 0x80. Bit 7 of register offset is stored in
404** bit 7 of the SCRIPTS instruction first DWORD.
405**-----------------------------------------------------------
406*/
407
408#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */
409
410#define SCR_SFBR_REG(reg,op,data) \
411 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
412
413#define SCR_REG_SFBR(reg,op,data) \
414 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
415
416#define SCR_REG_REG(reg,op,data) \
417 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
418
419
420#define SCR_LOAD 0x00000000
421#define SCR_SHL 0x01000000
422#define SCR_OR 0x02000000
423#define SCR_XOR 0x03000000
424#define SCR_AND 0x04000000
425#define SCR_SHR 0x05000000
426#define SCR_ADD 0x06000000
427#define SCR_ADDC 0x07000000
428
429#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
430
431/*-----------------------------------------------------------
432**
433** FROM_REG (reg) SFBR = reg
434** << 0 >>
435**
436** TO_REG (reg) reg = SFBR
437** << 0 >>
438**
439** LOAD_REG (reg, data) reg = <data>
440** << 0 >>
441**
442** LOAD_SFBR(data) SFBR = <data>
443** << 0 >>
444**
445**-----------------------------------------------------------
446*/
447
448#define SCR_FROM_REG(reg) \
449 SCR_REG_SFBR(reg,SCR_OR,0)
450
451#define SCR_TO_REG(reg) \
452 SCR_SFBR_REG(reg,SCR_OR,0)
453
454#define SCR_LOAD_REG(reg,data) \
455 SCR_REG_REG(reg,SCR_LOAD,data)
456
457#define SCR_LOAD_SFBR(data) \
458 (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
459
460/*-----------------------------------------------------------
461**
462** LOAD from memory to register.
463** STORE from register to memory.
464**
465** Only supported by 810A, 860, 825A, 875, 895 and 896.
466**
467**-----------------------------------------------------------
468**
469** LOAD_ABS (LEN)
470** <<start address>>
471**
472** LOAD_REL (LEN) (DSA relative)
473** <<dsa_offset>>
474**
475**-----------------------------------------------------------
476*/
477
478#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
479#define SCR_NO_FLUSH2 0x02000000
480#define SCR_DSA_REL2 0x10000000
481
482#define SCR_LOAD_R(reg, how, n) \
483 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
484
485#define SCR_STORE_R(reg, how, n) \
486 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
487
488#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
489#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
490#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
491#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
492
493#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
494#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
495#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
496#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
497
498
499/*-----------------------------------------------------------
500**
501** Waiting for Disconnect or Reselect
502**
503**-----------------------------------------------------------
504**
505** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
506** <<address>>
507**
508** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
509** <<distance>>
510**
511** CALL [ | IFTRUE/IFFALSE ( ... ) ]
512** <<address>>
513**
514** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
515** <<distance>>
516**
517** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
518** <<dummy>>
519**
520** INT [ | IFTRUE/IFFALSE ( ... ) ]
521** <<ident>>
522**
523** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
524** <<ident>>
525**
526** Conditions:
527** WHEN (phase)
528** IF (phase)
529** CARRYSET
530** DATA (data, mask)
531**
532**-----------------------------------------------------------
533*/
534
535#define SCR_NO_OP 0x80000000
536#define SCR_JUMP 0x80080000
537#define SCR_JUMP64 0x80480000
538#define SCR_JUMPR 0x80880000
539#define SCR_CALL 0x88080000
540#define SCR_CALLR 0x88880000
541#define SCR_RETURN 0x90080000
542#define SCR_INT 0x98080000
543#define SCR_INT_FLY 0x98180000
544
545#define IFFALSE(arg) (0x00080000 | (arg))
546#define IFTRUE(arg) (0x00000000 | (arg))
547
548#define WHEN(phase) (0x00030000 | (phase))
549#define IF(phase) (0x00020000 | (phase))
550
551#define DATA(D) (0x00040000 | ((D) & 0xff))
552#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
553
554#define CARRYSET (0x00200000)
555
556
557
558#define SIR_COMPLETE 0x10000000
559/* script errors */
560#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001
561#define SIR_CMD_OUT_ILL_PH 0x00000002
562#define SIR_STATUS_ILL_PH 0x00000003
563#define SIR_MSG_RECEIVED 0x00000004
564#define SIR_DATA_IN_ERR 0x00000005
565#define SIR_DATA_OUT_ERR 0x00000006
566#define SIR_SCRIPT_ERROR 0x00000007
567#define SIR_MSG_OUT_NO_CMD 0x00000008
568#define SIR_MSG_OVER7 0x00000009
569/* Fly interrupt */
570#define INT_ON_FY 0x00000080
571
572/* Hardware errors are defined in scsi.h */
573
574#define SCSI_IDENTIFY 0xC0
575
576#ifndef TRUE
577#define TRUE 1
578#endif
579#ifndef FALSE
580#define FALSE 0
581#endif
582
583#endif