Marian Balakowicz | 6c5879f | 2006-06-30 16:30:46 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2006 |
| 3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #ifndef __YUCCA_H_ |
| 25 | #define __YUCCA_H_ |
| 26 | |
| 27 | #ifdef __cplusplus |
| 28 | extern "C" { |
| 29 | #endif |
| 30 | |
| 31 | /*----------------------------------------------------------------------------+ |
| 32 | | Defines |
| 33 | +----------------------------------------------------------------------------*/ |
| 34 | |
| 35 | #define TMR_FREQ_EXT 25000000 |
| 36 | #define BOARD_UART_CLOCK 11059200 |
| 37 | |
| 38 | #define BOARD_OPTION_SELECTED 1 |
| 39 | #define BOARD_OPTION_NOT_SELECTED 0 |
| 40 | |
| 41 | #define ENGINEERING_CLOCK_CHECKING "clk_chk" |
| 42 | #define ENGINEERING_EXTERNAL_CLOCK "ext_clk" |
| 43 | |
| 44 | #define ENGINEERING_CLOCK_CHECKING_DATA 1 |
| 45 | #define ENGINEERING_EXTERNAL_CLOCK_DATA 2 |
| 46 | |
| 47 | /* ethernet definition */ |
| 48 | #define MAX_ENETMODE_PARM 3 |
| 49 | #define ENETMODE_NEG 0 |
| 50 | #define ENETMODE_SPEED 1 |
| 51 | #define ENETMODE_DUPLEX 2 |
| 52 | |
| 53 | #define ENETMODE_AUTONEG 0 |
| 54 | #define ENETMODE_NO_AUTONEG 1 |
| 55 | #define ENETMODE_10 2 |
| 56 | #define ENETMODE_100 3 |
| 57 | #define ENETMODE_1000 4 |
| 58 | #define ENETMODE_HALF 5 |
| 59 | #define ENETMODE_FULL 6 |
| 60 | |
| 61 | #define NUM_TLB_ENTRIES 64 |
| 62 | |
Stefan Roese | f5577aa | 2006-08-29 08:04:32 +0200 | [diff] [blame] | 63 | /* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ |
| 64 | #define MICRON_SPD_JEDEC_ID 0x2c |
| 65 | |
Marian Balakowicz | 6c5879f | 2006-06-30 16:30:46 +0200 | [diff] [blame] | 66 | /*----------------------------------------------------------------------------+ |
| 67 | | TLB specific defines. |
| 68 | +----------------------------------------------------------------------------*/ |
| 69 | #define TLB_256MB_ALIGN_MASK 0xF0000000 |
| 70 | #define TLB_16MB_ALIGN_MASK 0xFF000000 |
| 71 | #define TLB_1MB_ALIGN_MASK 0xFFF00000 |
| 72 | #define TLB_256KB_ALIGN_MASK 0xFFFC0000 |
| 73 | #define TLB_64KB_ALIGN_MASK 0xFFFF0000 |
| 74 | #define TLB_16KB_ALIGN_MASK 0xFFFFC000 |
| 75 | #define TLB_4KB_ALIGN_MASK 0xFFFFF000 |
| 76 | #define TLB_1KB_ALIGN_MASK 0xFFFFFC00 |
| 77 | #define TLB_256MB_SIZE 0x10000000 |
| 78 | #define TLB_16MB_SIZE 0x01000000 |
| 79 | #define TLB_1MB_SIZE 0x00100000 |
| 80 | #define TLB_256KB_SIZE 0x00040000 |
| 81 | #define TLB_64KB_SIZE 0x00010000 |
| 82 | #define TLB_16KB_SIZE 0x00004000 |
| 83 | #define TLB_4KB_SIZE 0x00001000 |
| 84 | #define TLB_1KB_SIZE 0x00000400 |
| 85 | |
| 86 | #define TLB_WORD0_EPN_MASK 0xFFFFFC00 |
| 87 | #define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| 88 | #define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| 89 | #define TLB_WORD0_V_MASK 0x00000200 |
| 90 | #define TLB_WORD0_V_ENABLE 0x00000200 |
| 91 | #define TLB_WORD0_V_DISABLE 0x00000000 |
| 92 | #define TLB_WORD0_TS_MASK 0x00000100 |
| 93 | #define TLB_WORD0_TS_1 0x00000100 |
| 94 | #define TLB_WORD0_TS_0 0x00000000 |
| 95 | #define TLB_WORD0_SIZE_MASK 0x000000F0 |
| 96 | #define TLB_WORD0_SIZE_1KB 0x00000000 |
| 97 | #define TLB_WORD0_SIZE_4KB 0x00000010 |
| 98 | #define TLB_WORD0_SIZE_16KB 0x00000020 |
| 99 | #define TLB_WORD0_SIZE_64KB 0x00000030 |
| 100 | #define TLB_WORD0_SIZE_256KB 0x00000040 |
| 101 | #define TLB_WORD0_SIZE_1MB 0x00000050 |
| 102 | #define TLB_WORD0_SIZE_16MB 0x00000070 |
| 103 | #define TLB_WORD0_SIZE_256MB 0x00000090 |
| 104 | #define TLB_WORD0_TPAR_MASK 0x0000000F |
| 105 | #define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) |
| 106 | #define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) |
| 107 | |
| 108 | #define TLB_WORD1_RPN_MASK 0xFFFFFC00 |
| 109 | #define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| 110 | #define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| 111 | #define TLB_WORD1_PAR1_MASK 0x00000300 |
| 112 | #define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) |
| 113 | #define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) |
| 114 | #define TLB_WORD1_PAR1_0 0x00000000 |
| 115 | #define TLB_WORD1_PAR1_1 0x00000100 |
| 116 | #define TLB_WORD1_PAR1_2 0x00000200 |
| 117 | #define TLB_WORD1_PAR1_3 0x00000300 |
| 118 | #define TLB_WORD1_ERPN_MASK 0x0000000F |
| 119 | #define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) |
| 120 | #define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) |
| 121 | |
| 122 | #define TLB_WORD2_PAR2_MASK 0xC0000000 |
| 123 | #define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) |
| 124 | #define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) |
| 125 | #define TLB_WORD2_PAR2_0 0x00000000 |
| 126 | #define TLB_WORD2_PAR2_1 0x40000000 |
| 127 | #define TLB_WORD2_PAR2_2 0x80000000 |
| 128 | #define TLB_WORD2_PAR2_3 0xC0000000 |
| 129 | #define TLB_WORD2_U0_MASK 0x00008000 |
| 130 | #define TLB_WORD2_U0_ENABLE 0x00008000 |
| 131 | #define TLB_WORD2_U0_DISABLE 0x00000000 |
| 132 | #define TLB_WORD2_U1_MASK 0x00004000 |
| 133 | #define TLB_WORD2_U1_ENABLE 0x00004000 |
| 134 | #define TLB_WORD2_U1_DISABLE 0x00000000 |
| 135 | #define TLB_WORD2_U2_MASK 0x00002000 |
| 136 | #define TLB_WORD2_U2_ENABLE 0x00002000 |
| 137 | #define TLB_WORD2_U2_DISABLE 0x00000000 |
| 138 | #define TLB_WORD2_U3_MASK 0x00001000 |
| 139 | #define TLB_WORD2_U3_ENABLE 0x00001000 |
| 140 | #define TLB_WORD2_U3_DISABLE 0x00000000 |
| 141 | #define TLB_WORD2_W_MASK 0x00000800 |
| 142 | #define TLB_WORD2_W_ENABLE 0x00000800 |
| 143 | #define TLB_WORD2_W_DISABLE 0x00000000 |
| 144 | #define TLB_WORD2_I_MASK 0x00000400 |
| 145 | #define TLB_WORD2_I_ENABLE 0x00000400 |
| 146 | #define TLB_WORD2_I_DISABLE 0x00000000 |
| 147 | #define TLB_WORD2_M_MASK 0x00000200 |
| 148 | #define TLB_WORD2_M_ENABLE 0x00000200 |
| 149 | #define TLB_WORD2_M_DISABLE 0x00000000 |
| 150 | #define TLB_WORD2_G_MASK 0x00000100 |
| 151 | #define TLB_WORD2_G_ENABLE 0x00000100 |
| 152 | #define TLB_WORD2_G_DISABLE 0x00000000 |
| 153 | #define TLB_WORD2_E_MASK 0x00000080 |
| 154 | #define TLB_WORD2_E_ENABLE 0x00000080 |
| 155 | #define TLB_WORD2_E_DISABLE 0x00000000 |
| 156 | #define TLB_WORD2_UX_MASK 0x00000020 |
| 157 | #define TLB_WORD2_UX_ENABLE 0x00000020 |
| 158 | #define TLB_WORD2_UX_DISABLE 0x00000000 |
| 159 | #define TLB_WORD2_UW_MASK 0x00000010 |
| 160 | #define TLB_WORD2_UW_ENABLE 0x00000010 |
| 161 | #define TLB_WORD2_UW_DISABLE 0x00000000 |
| 162 | #define TLB_WORD2_UR_MASK 0x00000008 |
| 163 | #define TLB_WORD2_UR_ENABLE 0x00000008 |
| 164 | #define TLB_WORD2_UR_DISABLE 0x00000000 |
| 165 | #define TLB_WORD2_SX_MASK 0x00000004 |
| 166 | #define TLB_WORD2_SX_ENABLE 0x00000004 |
| 167 | #define TLB_WORD2_SX_DISABLE 0x00000000 |
| 168 | #define TLB_WORD2_SW_MASK 0x00000002 |
| 169 | #define TLB_WORD2_SW_ENABLE 0x00000002 |
| 170 | #define TLB_WORD2_SW_DISABLE 0x00000000 |
| 171 | #define TLB_WORD2_SR_MASK 0x00000001 |
| 172 | #define TLB_WORD2_SR_ENABLE 0x00000001 |
| 173 | #define TLB_WORD2_SR_DISABLE 0x00000000 |
| 174 | |
| 175 | /*----------------------------------------------------------------------------+ |
| 176 | | Board specific defines. |
| 177 | +----------------------------------------------------------------------------*/ |
| 178 | #define NONCACHE_MEMORY_SIZE (64*1024) |
| 179 | #define NONCACHE_AREA0_ENDOFFSET (64*1024) |
| 180 | #define NONCACHE_AREA1_ENDOFFSET (32*1024) |
| 181 | |
| 182 | #define FLASH_SECTORSIZE 0x00010000 |
| 183 | |
| 184 | /* SDRAM MICRON */ |
| 185 | #define SDRAM_MICRON 0x2C |
| 186 | |
| 187 | #define SDRAM_TRUE 1 |
| 188 | #define SDRAM_FALSE 0 |
| 189 | #define SDRAM_DDR1 1 |
| 190 | #define SDRAM_DDR2 2 |
| 191 | #define SDRAM_NONE 0 |
| 192 | #define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */ |
| 193 | #define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */ |
| 194 | #define MAXBANKSPERDIMM 2 |
| 195 | #define MAXRANKSPERDIMM 2 |
| 196 | #define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */ |
| 197 | #define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */ |
| 198 | #define ERROR_STR_LENGTH 256 |
| 199 | #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ |
| 200 | |
| 201 | /*----------------------------------------------------------------------------+ |
| 202 | | SDR Configuration registers |
| 203 | +----------------------------------------------------------------------------*/ |
| 204 | /* Serial Device Strap Reg 0 */ |
| 205 | #define sdr_pstrp0 0x0040 |
| 206 | |
| 207 | #define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */ |
| 208 | #define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */ |
| 209 | #define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ |
| 210 | |
| 211 | #define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */ |
| 212 | #define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ |
| 213 | #define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */ |
| 214 | |
| 215 | #define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */ |
| 216 | #define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */ |
| 217 | #define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */ |
| 218 | #define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */ |
| 219 | #define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */ |
| 220 | |
| 221 | /* Serial Device Enabled - Addr = 0xA8 */ |
| 222 | #define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 |
| 223 | /* Serial Device Enabled - Addr = 0xA4 */ |
| 224 | #define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 |
| 225 | |
| 226 | /* Pin Straps Reg */ |
| 227 | #define SDR0_PSTRP0 0x0040 |
| 228 | #define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ |
| 229 | |
| 230 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ |
| 231 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ |
| 232 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ |
| 233 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ |
| 234 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ |
| 235 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ |
| 236 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ |
| 237 | #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ |
| 238 | |
| 239 | /* fpgareg - defines are in include/config/YUCCA.h */ |
| 240 | |
| 241 | #define SDR0_CUST0_ENET3_MASK 0x00000080 |
| 242 | #define SDR0_CUST0_ENET3_COPPER 0x00000000 |
| 243 | #define SDR0_CUST0_ENET3_FIBER 0x00000080 |
| 244 | #define SDR0_CUST0_RGMII3_MASK 0x00000070 |
| 245 | #define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) |
| 246 | #define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) |
| 247 | #define SDR0_CUST0_RGMII3_DISAB 0x00000000 |
| 248 | #define SDR0_CUST0_RGMII3_RTBI 0x00000040 |
| 249 | #define SDR0_CUST0_RGMII3_RGMII 0x00000050 |
| 250 | #define SDR0_CUST0_RGMII3_TBI 0x00000060 |
| 251 | #define SDR0_CUST0_RGMII3_GMII 0x00000070 |
| 252 | #define SDR0_CUST0_ENET2_MASK 0x00000008 |
| 253 | #define SDR0_CUST0_ENET2_COPPER 0x00000000 |
| 254 | #define SDR0_CUST0_ENET2_FIBER 0x00000008 |
| 255 | #define SDR0_CUST0_RGMII2_MASK 0x00000007 |
| 256 | #define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) |
| 257 | #define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) |
| 258 | #define SDR0_CUST0_RGMII2_DISAB 0x00000000 |
| 259 | #define SDR0_CUST0_RGMII2_RTBI 0x00000004 |
| 260 | #define SDR0_CUST0_RGMII2_RGMII 0x00000005 |
| 261 | #define SDR0_CUST0_RGMII2_TBI 0x00000006 |
| 262 | #define SDR0_CUST0_RGMII2_GMII 0x00000007 |
| 263 | |
| 264 | #define ONE_MILLION 1000000 |
| 265 | #define ONE_BILLION 1000000000 |
| 266 | |
| 267 | /*----------------------------------------------------------------------------+ |
| 268 | | X |
| 269 | | XX |
| 270 | | XX XXX XXXXX XX XXX XXXXX |
| 271 | | XX XX X XXX XX XX |
| 272 | | XX XX XXXXXX XX XX |
| 273 | | XX XX X XX XX XX XX |
| 274 | | XXX XX XXXXX X XXXX XXX |
| 275 | +----------------------------------------------------------------------------*/ |
| 276 | /*----------------------------------------------------------------------------+ |
| 277 | | Declare Configuration values |
| 278 | +----------------------------------------------------------------------------*/ |
| 279 | |
| 280 | typedef enum config_selection { |
| 281 | CONFIG_NOT_SELECTED, |
| 282 | CONFIG_SELECTED |
| 283 | } config_selection_t; |
| 284 | |
| 285 | typedef enum config_list { |
| 286 | UART2_IN_SERVICE_MODE, |
| 287 | CPU_TRACE_MODE, |
| 288 | UART1_CTS_RTS, |
| 289 | CONFIG_NB |
| 290 | } config_list_t; |
| 291 | |
| 292 | #define MAX_CONFIG_SELECT_NB 3 |
| 293 | |
| 294 | #define BOARD_INFO_UART2_IN_SERVICE_MODE 1 |
| 295 | #define BOARD_INFO_CPU_TRACE_MODE 2 |
| 296 | #define BOARD_INFO_UART1_CTS_RTS_MODE 4 |
| 297 | |
| 298 | void force_bup_config_selection(config_selection_t *confgi_select_P); |
| 299 | void update_config_selection_table(config_selection_t *config_select_P); |
| 300 | void display_config_selection(config_selection_t *config_select_P); |
| 301 | |
| 302 | /*----------------------------------------------------------------------------+ |
| 303 | | XX |
| 304 | | |
| 305 | | XXXX XX XXX XXX XXXX |
| 306 | | XX XX XX XX XX XX |
| 307 | | XX XXX XX XX XX XX XX |
| 308 | | XX XX XXXXX XX XX XX |
| 309 | | XXXX XX XXXX XXXX |
| 310 | | XXXX |
| 311 | | |
| 312 | | |
| 313 | | |
| 314 | | +------------------------------------------------------------------+ |
| 315 | | | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O | |
| 316 | | +----------------------+------------------+-----+------------+-----+ |
| 317 | | | | | | | | |
| 318 | | | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | | |
| 319 | | | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | | |
| 320 | | | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | | |
| 321 | | | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | | |
| 322 | | | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | | |
| 323 | | | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | | |
| 324 | | | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA | |
| 325 | | | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA | |
| 326 | | | GPIO0_8 | PERREADY | I | TRCES4 | NA | |
| 327 | | | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA | |
| 328 | | | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA | |
| 329 | | | GPIO0_11 | IRQ0 | I | TRCTS2 | NA | |
| 330 | | | GPIO0_12 | IRQ1 | I | TRCTS3 | NA | |
| 331 | | | GPIO0_13 | IRQ2 | I | TRCTS4 | NA | |
| 332 | | | GPIO0_14 | IRQ3 | I | TRCTS5 | NA | |
| 333 | | | GPIO0_15 | IRQ4 | I | TRCTS6 | NA | |
| 334 | | | GPIO0_16 | IRQ5 | I | UART2RX | I | |
| 335 | | | GPIO0_17 | PERBE0_N | O | UART2TX | O | |
| 336 | | | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA | |
| 337 | | | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA | |
| 338 | | | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA | |
| 339 | | | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA | |
| 340 | | | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA | |
| 341 | | | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA | |
| 342 | | | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA | |
| 343 | | | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA | |
| 344 | | | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA | |
| 345 | | | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA | |
| 346 | | | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA | |
| 347 | | | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA | |
| 348 | | | GPIO0_30 | UART1RX | I | NA | NA | |
| 349 | | | GPIO0_31 | UART1TX | O | NA | NA | |
| 350 | | | | | | | | |
| 351 | | +----------------------+------------------+-----+------------+-----+ |
| 352 | | |
| 353 | +----------------------------------------------------------------------------*/ |
| 354 | |
Marian Balakowicz | 6c5879f | 2006-06-30 16:30:46 +0200 | [diff] [blame] | 355 | unsigned long auto_calc_speed(void); |
| 356 | /*----------------------------------------------------------------------------+ |
| 357 | | Prototypes |
| 358 | +----------------------------------------------------------------------------*/ |
| 359 | void print_evb440spe_info(void); |
| 360 | |
| 361 | int onboard_pci_arbiter_selected(int core_pci); |
| 362 | |
| 363 | #ifdef __cplusplus |
| 364 | } |
| 365 | #endif |
| 366 | #endif /* __YUCCA_H_ */ |