blob: 7f584033bd20f38204f22c7c4658a4d4821532a7 [file] [log] [blame]
Chander Kashyapb0ad8622011-04-14 19:05:18 +00001/*
2 * (C) Copyright 2010 Samsung Electronics
3 * Naveen Krishna Ch <ch.naveen@samsung.com>
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Chander Kashyapb0ad8622011-04-14 19:05:18 +00006 *
7 * Note: This file contains the register description for SROMC
Chander Kashyapb0ad8622011-04-14 19:05:18 +00008 */
9
10#ifndef __ASM_ARCH_SROMC_H_
11#define __ASM_ARCH_SROMC_H_
12
13#define SROMC_DATA16_WIDTH(x) (1<<((x*4)+0))
14#define SROMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/
15 /* 1-> Byte base address*/
16#define SROMC_WAIT_ENABLE(x) (1<<((x*4)+2))
17#define SROMC_BYTE_ENABLE(x) (1<<((x*4)+3))
18
19#define SROMC_BC_TACS(x) (x << 28) /* address set-up */
20#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */
21#define SROMC_BC_TACC(x) (x << 16) /* access cycle */
22#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */
23#define SROMC_BC_TAH(x) (x << 8) /* address holding time */
24#define SROMC_BC_TACP(x) (x << 4) /* page mode access cycle */
25#define SROMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */
26
27#ifndef __ASSEMBLY__
28struct s5p_sromc {
29 unsigned int bw;
30 unsigned int bc[4];
31};
32#endif /* __ASSEMBLY__ */
33
34/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
35void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
36
Hatim RV3ea93942012-12-11 00:52:47 +000037enum {
38 FDT_SROM_PMC,
39 FDT_SROM_TACP,
40 FDT_SROM_TAH,
41 FDT_SROM_TCOH,
42 FDT_SROM_TACC,
43 FDT_SROM_TCOS,
44 FDT_SROM_TACS,
45
46 FDT_SROM_TIMING_COUNT,
47};
48
49struct fdt_sromc {
50 u8 bank; /* srom bank number */
51 u8 width; /* bus width in bytes */
52 unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */
53};
54
Chander Kashyapb0ad8622011-04-14 19:05:18 +000055#endif /* __ASM_ARCH_SROMC_H_ */