blob: e578f0be28467ba15fdc9a919fa92626d89c3e43 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Marek Vasut23faf2b2012-02-13 18:58:17 +00002/*
Marek Vasut23faf2b2012-02-13 18:58:17 +00003 * Most of this source has been derived from the Linux USB
4 * project:
5 * (C) Copyright Linus Torvalds 1999
6 * (C) Copyright Johannes Erdfelt 1999-2001
7 * (C) Copyright Andreas Gal 1999
8 * (C) Copyright Gregory P. Smith 1999
9 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
10 * (C) Copyright Randy Dunlap 2000
11 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
12 * (C) Copyright Yggdrasil Computing, Inc. 2000
13 * (usb_device_id matching changes by Adam J. Richter)
14 *
15 * Adapted for U-Boot:
16 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
Marek Vasut23faf2b2012-02-13 18:58:17 +000017 */
18
19/****************************************************************************
20 * HUB "Driver"
21 * Probes device for being a hub and configurate it
22 */
23
24#include <common.h>
25#include <command.h>
Simon Glass054fe482015-03-25 12:22:10 -060026#include <dm.h>
Simon Glass7b51b572019-08-01 09:46:52 -060027#include <env.h>
Simon Glass79b58882015-03-25 12:22:01 -060028#include <errno.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060029#include <log.h>
Simon Glass336d4612020-02-03 07:36:16 -070030#include <malloc.h>
Simon Glasscf92e052015-09-02 17:24:58 -060031#include <memalign.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000032#include <asm/processor.h>
Lucas Stach93ad9082012-09-06 08:00:13 +020033#include <asm/unaligned.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000034#include <linux/ctype.h>
Simon Glassc05ed002020-05-10 11:40:11 -060035#include <linux/delay.h>
Stefan Roesec998da02016-03-15 13:59:15 +010036#include <linux/list.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000037#include <asm/byteorder.h>
Simon Glass3884c982015-11-08 23:47:44 -070038#ifdef CONFIG_SANDBOX
39#include <asm/state.h>
40#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +000041#include <asm/unaligned.h>
Simon Glass054fe482015-03-25 12:22:10 -060042
Marek Vasut23faf2b2012-02-13 18:58:17 +000043#include <usb.h>
Marek Vasut23faf2b2012-02-13 18:58:17 +000044
Marek Vasut23faf2b2012-02-13 18:58:17 +000045#define USB_BUFSIZ 512
46
Stefan Roesef7f60102016-03-15 13:59:12 +010047#define HUB_SHORT_RESET_TIME 20
48#define HUB_LONG_RESET_TIME 200
49
Stefan Roesec998da02016-03-15 13:59:15 +010050#define PORT_OVERCURRENT_MAX_SCAN_COUNT 3
51
52struct usb_device_scan {
53 struct usb_device *dev; /* USB hub device to scan */
54 struct usb_hub_device *hub; /* USB hub struct */
55 int port; /* USB port to scan */
56 struct list_head list;
57};
58
Stefan Roesec998da02016-03-15 13:59:15 +010059static LIST_HEAD(usb_scan_list);
Marek Vasut23faf2b2012-02-13 18:58:17 +000060
Philipp Tomsich883946e2017-11-22 17:15:17 +010061__weak void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
Dan Murphy3615a992013-08-01 14:06:01 -050062{
63 return;
64}
Marek Vasut23faf2b2012-02-13 18:58:17 +000065
Bin Mengf3421192017-07-19 21:49:58 +080066static inline bool usb_hub_is_superspeed(struct usb_device *hdev)
67{
68 return hdev->descriptor.bDeviceProtocol == 3;
69}
70
Sven Schwermerfd09c202018-11-21 08:43:56 +010071#if CONFIG_IS_ENABLED(DM_USB)
Bin Meng46c1d492017-07-19 21:51:11 +080072bool usb_hub_is_root_hub(struct udevice *hub)
73{
74 if (device_get_uclass_id(hub->parent) != UCLASS_USB_HUB)
75 return true;
76
77 return false;
78}
Bin Mengbbc6f062017-07-19 21:51:13 +080079
80static int usb_set_hub_depth(struct usb_device *dev, int depth)
81{
82 if (depth < 0 || depth > 4)
83 return -EINVAL;
84
85 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
86 USB_REQ_SET_HUB_DEPTH, USB_DIR_OUT | USB_RT_HUB,
87 depth, 0, NULL, 0, USB_CNTL_TIMEOUT);
88}
Bin Meng46c1d492017-07-19 21:51:11 +080089#endif
90
Marek Vasut23faf2b2012-02-13 18:58:17 +000091static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
92{
Bin Mengf3421192017-07-19 21:49:58 +080093 unsigned short dtype = USB_DT_HUB;
94
95 if (usb_hub_is_superspeed(dev))
96 dtype = USB_DT_SS_HUB;
97
Marek Vasut23faf2b2012-02-13 18:58:17 +000098 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
99 USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
Bin Mengf3421192017-07-19 21:49:58 +0800100 dtype << 8, 0, data, size, USB_CNTL_TIMEOUT);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000101}
102
103static int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
104{
105 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
106 USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
107 port, NULL, 0, USB_CNTL_TIMEOUT);
108}
109
110static int usb_set_port_feature(struct usb_device *dev, int port, int feature)
111{
112 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
113 USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
114 port, NULL, 0, USB_CNTL_TIMEOUT);
115}
116
117static int usb_get_hub_status(struct usb_device *dev, void *data)
118{
119 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
120 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
121 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
122}
123
Vincent Palatin08f3bb02015-05-04 11:30:54 -0600124int usb_get_port_status(struct usb_device *dev, int port, void *data)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000125{
Bin Meng74ffc7c2017-07-19 21:51:12 +0800126 int ret;
127
128 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
Marek Vasut23faf2b2012-02-13 18:58:17 +0000129 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
Bin Meng53771a42017-07-19 21:49:59 +0800130 data, sizeof(struct usb_port_status), USB_CNTL_TIMEOUT);
Bin Meng74ffc7c2017-07-19 21:51:12 +0800131
Sven Schwermerfd09c202018-11-21 08:43:56 +0100132#if CONFIG_IS_ENABLED(DM_USB)
Bin Meng74ffc7c2017-07-19 21:51:12 +0800133 if (ret < 0)
134 return ret;
135
136 /*
137 * Translate the USB 3.0 hub port status field into the old version
138 * that U-Boot understands. Do this only when the hub is not root hub.
139 * For root hub, the port status field has already been translated
140 * in the host controller driver (see xhci_submit_root() in xhci.c).
141 *
142 * Note: this only supports driver model.
143 */
144
145 if (!usb_hub_is_root_hub(dev->dev) && usb_hub_is_superspeed(dev)) {
146 struct usb_port_status *status = (struct usb_port_status *)data;
147 u16 tmp = (status->wPortStatus) & USB_SS_PORT_STAT_MASK;
148
149 if (status->wPortStatus & USB_SS_PORT_STAT_POWER)
150 tmp |= USB_PORT_STAT_POWER;
151 if ((status->wPortStatus & USB_SS_PORT_STAT_SPEED) ==
152 USB_SS_PORT_STAT_SPEED_5GBPS)
153 tmp |= USB_PORT_STAT_SUPER_SPEED;
154
155 status->wPortStatus = tmp;
156 }
157#endif
158
159 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000160}
161
162
163static void usb_hub_power_on(struct usb_hub_device *hub)
164{
165 int i;
166 struct usb_device *dev;
Wolfgang Grandeggera1a28c62011-12-21 00:01:09 +0000167 unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
Tim Harvey319418c2015-04-08 12:21:12 -0700168 const char *env;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000169
170 dev = hub->pusb_dev;
Vivek Gautam0bf796f2013-04-24 02:50:11 +0000171
Vivek Gautamceb49722013-04-12 16:34:33 +0530172 debug("enabling power on all ports\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000173 for (i = 0; i < dev->maxchild; i++) {
174 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
Vivek Gautamceb49722013-04-12 16:34:33 +0530175 debug("port %d returns %lX\n", i + 1, dev->status);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000176 }
Wolfgang Grandeggera1a28c62011-12-21 00:01:09 +0000177
Stefan Roesec998da02016-03-15 13:59:15 +0100178#ifdef CONFIG_SANDBOX
179 /*
180 * Don't set timeout / delay values here. This results
181 * in these values still being reset to 0.
182 */
183 if (state_get_skip_delays())
184 return;
185#endif
186
Stephen Warren0d437bc2014-05-19 14:21:17 -0600187 /*
188 * Wait for power to become stable,
189 * plus spec-defined max time for device to connect
Tim Harvey319418c2015-04-08 12:21:12 -0700190 * but allow this time to be increased via env variable as some
191 * devices break the spec and require longer warm-up times
Stephen Warren0d437bc2014-05-19 14:21:17 -0600192 */
Simon Glass00caae62017-08-03 12:22:12 -0600193 env = env_get("usb_pgood_delay");
Tim Harvey319418c2015-04-08 12:21:12 -0700194 if (env)
195 pgood_delay = max(pgood_delay,
196 (unsigned)simple_strtol(env, NULL, 0));
197 debug("pgood_delay=%dms\n", pgood_delay);
Stefan Roesec998da02016-03-15 13:59:15 +0100198
199 /*
200 * Do a minimum delay of the larger value of 100ms or pgood_delay
201 * so that the power can stablize before the devices are queried
202 */
203 hub->query_delay = get_timer(0) + max(100, (int)pgood_delay);
204
205 /*
206 * Record the power-on timeout here. The max. delay (timeout)
207 * will be done based on this value in the USB port loop in
208 * usb_hub_configure() later.
209 */
210 hub->connect_timeout = hub->query_delay + 1000;
211 debug("devnum=%d poweron: query_delay=%d connect_timeout=%d\n",
212 dev->devnum, max(100, (int)pgood_delay),
213 max(100, (int)pgood_delay) + 1000);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000214}
215
Sven Schwermerfd09c202018-11-21 08:43:56 +0100216#if !CONFIG_IS_ENABLED(DM_USB)
Bin Mengdfa96e02017-07-19 21:51:09 +0800217static struct usb_hub_device hub_dev[USB_MAX_HUB];
218static int usb_hub_index;
219
Marek Vasut23faf2b2012-02-13 18:58:17 +0000220void usb_hub_reset(void)
221{
222 usb_hub_index = 0;
Stefan Roesec998da02016-03-15 13:59:15 +0100223
224 /* Zero out global hub_dev in case its re-used again */
225 memset(hub_dev, 0, sizeof(hub_dev));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000226}
227
228static struct usb_hub_device *usb_hub_allocate(void)
229{
230 if (usb_hub_index < USB_MAX_HUB)
231 return &hub_dev[usb_hub_index++];
232
233 printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
234 return NULL;
235}
Bin Mengdfa96e02017-07-19 21:51:09 +0800236#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +0000237
238#define MAX_TRIES 5
239
Ismael Luceno Cortes51f60a82019-04-01 16:09:13 +0000240static inline const char *portspeed(int portstatus)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000241{
Vivek Gautam55f4b572013-04-24 02:50:12 +0000242 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
243 case USB_PORT_STAT_SUPER_SPEED:
Ismael Luceno Cortes51f60a82019-04-01 16:09:13 +0000244 return "5 Gb/s";
Vivek Gautam55f4b572013-04-24 02:50:12 +0000245 case USB_PORT_STAT_HIGH_SPEED:
Ismael Luceno Cortes51f60a82019-04-01 16:09:13 +0000246 return "480 Mb/s";
Vivek Gautam55f4b572013-04-24 02:50:12 +0000247 case USB_PORT_STAT_LOW_SPEED:
Ismael Luceno Cortes51f60a82019-04-01 16:09:13 +0000248 return "1.5 Mb/s";
Vivek Gautam55f4b572013-04-24 02:50:12 +0000249 default:
Ismael Luceno Cortes51f60a82019-04-01 16:09:13 +0000250 return "12 Mb/s";
Vivek Gautam55f4b572013-04-24 02:50:12 +0000251 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000252}
253
Bin Menga199a722017-07-19 21:51:10 +0800254/**
255 * usb_hub_port_reset() - reset a port given its usb_device pointer
256 *
257 * Reset a hub port and see if a device is present on that port, providing
258 * sufficient time for it to show itself. The port status is returned.
259 *
260 * @dev: USB device to reset
261 * @port: Port number to reset (note ports are numbered from 0 here)
262 * @portstat: Returns port status
263 */
264static int usb_hub_port_reset(struct usb_device *dev, int port,
265 unsigned short *portstat)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000266{
Hans de Goedead84a422015-05-10 14:10:15 +0200267 int err, tries;
Puneet Saxenaf5766132012-04-03 14:56:06 +0530268 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000269 unsigned short portstatus, portchange;
Stefan Roesef7f60102016-03-15 13:59:12 +0100270 int delay = HUB_SHORT_RESET_TIME; /* start with short reset delay */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000271
Sven Schwermerfd09c202018-11-21 08:43:56 +0100272#if CONFIG_IS_ENABLED(DM_USB)
Simon Glass054fe482015-03-25 12:22:10 -0600273 debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
274 port + 1);
275#else
276 debug("%s: resetting port %d...\n", __func__, port + 1);
277#endif
Marek Vasut23faf2b2012-02-13 18:58:17 +0000278 for (tries = 0; tries < MAX_TRIES; tries++) {
Hans de Goedead84a422015-05-10 14:10:15 +0200279 err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
280 if (err < 0)
281 return err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000282
Stefan Roesef7f60102016-03-15 13:59:12 +0100283 mdelay(delay);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000284
Puneet Saxenaf5766132012-04-03 14:56:06 +0530285 if (usb_get_port_status(dev, port + 1, portsts) < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530286 debug("get_port_status failed status %lX\n",
287 dev->status);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000288 return -1;
289 }
Puneet Saxenaf5766132012-04-03 14:56:06 +0530290 portstatus = le16_to_cpu(portsts->wPortStatus);
291 portchange = le16_to_cpu(portsts->wPortChange);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000292
Vivek Gautamceb49722013-04-12 16:34:33 +0530293 debug("portstatus %x, change %x, %s\n", portstatus, portchange,
294 portspeed(portstatus));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000295
Vivek Gautamceb49722013-04-12 16:34:33 +0530296 debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
297 " USB_PORT_STAT_ENABLE %d\n",
298 (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
299 (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
300 (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000301
Stephen Warren74c0d752014-08-07 17:07:59 -0600302 /*
303 * Perhaps we should check for the following here:
304 * - C_CONNECTION hasn't been set.
305 * - CONNECTION is still set.
306 *
307 * Doing so would ensure that the device is still connected
308 * to the bus, and hasn't been unplugged or replaced while the
309 * USB bus reset was going on.
310 *
311 * However, if we do that, then (at least) a San Disk Ultra
312 * USB 3.0 16GB device fails to reset on (at least) an NVIDIA
313 * Tegra Jetson TK1 board. For some reason, the device appears
314 * to briefly drop off the bus when this second bus reset is
315 * executed, yet if we retry this loop, it'll eventually come
316 * back after another reset or two.
317 */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000318
319 if (portstatus & USB_PORT_STAT_ENABLE)
320 break;
321
Stefan Roesef7f60102016-03-15 13:59:12 +0100322 /* Switch to long reset delay for the next round */
323 delay = HUB_LONG_RESET_TIME;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000324 }
325
326 if (tries == MAX_TRIES) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530327 debug("Cannot enable port %i after %i retries, " \
328 "disabling port.\n", port + 1, MAX_TRIES);
329 debug("Maybe the USB cable is bad?\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000330 return -1;
331 }
332
333 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
334 *portstat = portstatus;
335 return 0;
336}
337
Simon Glass79b58882015-03-25 12:22:01 -0600338int usb_hub_port_connect_change(struct usb_device *dev, int port)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000339{
Puneet Saxenaf5766132012-04-03 14:56:06 +0530340 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000341 unsigned short portstatus;
Simon Glass79b58882015-03-25 12:22:01 -0600342 int ret, speed;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000343
344 /* Check status */
Simon Glass79b58882015-03-25 12:22:01 -0600345 ret = usb_get_port_status(dev, port + 1, portsts);
346 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530347 debug("get_port_status failed\n");
Simon Glass79b58882015-03-25 12:22:01 -0600348 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000349 }
350
Puneet Saxenaf5766132012-04-03 14:56:06 +0530351 portstatus = le16_to_cpu(portsts->wPortStatus);
Vivek Gautamceb49722013-04-12 16:34:33 +0530352 debug("portstatus %x, change %x, %s\n",
353 portstatus,
354 le16_to_cpu(portsts->wPortChange),
355 portspeed(portstatus));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000356
357 /* Clear the connection change status */
358 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
359
360 /* Disconnect any existing devices under this port */
361 if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
Simon Glass054fe482015-03-25 12:22:10 -0600362 (!(portstatus & USB_PORT_STAT_ENABLE))) ||
363 usb_device_has_child_on_port(dev, port)) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530364 debug("usb_disconnect(&hub->children[port]);\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000365 /* Return now if nothing is connected */
366 if (!(portstatus & USB_PORT_STAT_CONNECTION))
Simon Glass79b58882015-03-25 12:22:01 -0600367 return -ENOTCONN;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000368 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000369
370 /* Reset the port */
Bin Menga199a722017-07-19 21:51:10 +0800371 ret = usb_hub_port_reset(dev, port, &portstatus);
Simon Glass79b58882015-03-25 12:22:01 -0600372 if (ret < 0) {
Hans de Goede45b9ea12015-05-10 14:10:16 +0200373 if (ret != -ENXIO)
374 printf("cannot reset port %i!?\n", port + 1);
Simon Glass79b58882015-03-25 12:22:01 -0600375 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000376 }
377
Vivek Gautam55f4b572013-04-24 02:50:12 +0000378 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
379 case USB_PORT_STAT_SUPER_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600380 speed = USB_SPEED_SUPER;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000381 break;
382 case USB_PORT_STAT_HIGH_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600383 speed = USB_SPEED_HIGH;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000384 break;
385 case USB_PORT_STAT_LOW_SPEED:
Simon Glass79b58882015-03-25 12:22:01 -0600386 speed = USB_SPEED_LOW;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000387 break;
388 default:
Simon Glass79b58882015-03-25 12:22:01 -0600389 speed = USB_SPEED_FULL;
Vivek Gautam55f4b572013-04-24 02:50:12 +0000390 break;
391 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000392
Sven Schwermerfd09c202018-11-21 08:43:56 +0100393#if CONFIG_IS_ENABLED(DM_USB)
Simon Glass054fe482015-03-25 12:22:10 -0600394 struct udevice *child;
395
396 ret = usb_scan_device(dev->dev, port + 1, speed, &child);
397#else
398 struct usb_device *usb;
399
Simon Glass79b58882015-03-25 12:22:01 -0600400 ret = usb_alloc_new_device(dev->controller, &usb);
401 if (ret) {
402 printf("cannot create new device: ret=%d", ret);
403 return ret;
404 }
405
Marek Vasut23faf2b2012-02-13 18:58:17 +0000406 dev->children[port] = usb;
Simon Glass79b58882015-03-25 12:22:01 -0600407 usb->speed = speed;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000408 usb->parent = dev;
409 usb->portnr = port + 1;
410 /* Run it through the hoops (find a driver, etc) */
Simon Glass79b58882015-03-25 12:22:01 -0600411 ret = usb_new_device(usb);
412 if (ret < 0) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000413 /* Woops, disable the port */
Simon Glass79b58882015-03-25 12:22:01 -0600414 usb_free_device(dev->controller);
Milind Choudhary359439d2012-12-12 17:55:28 -0800415 dev->children[port] = NULL;
Simon Glass054fe482015-03-25 12:22:10 -0600416 }
417#endif
418 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530419 debug("hub: disabling port %d\n", port + 1);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000420 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
421 }
Simon Glass79b58882015-03-25 12:22:01 -0600422
423 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000424}
425
Stefan Roesec998da02016-03-15 13:59:15 +0100426static int usb_scan_port(struct usb_device_scan *usb_scan)
427{
428 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
429 unsigned short portstatus;
430 unsigned short portchange;
431 struct usb_device *dev;
432 struct usb_hub_device *hub;
433 int ret = 0;
434 int i;
435
436 dev = usb_scan->dev;
437 hub = usb_scan->hub;
438 i = usb_scan->port;
439
440 /*
441 * Don't talk to the device before the query delay is expired.
442 * This is needed for voltages to stabalize.
443 */
444 if (get_timer(0) < hub->query_delay)
445 return 0;
446
447 ret = usb_get_port_status(dev, i + 1, portsts);
448 if (ret < 0) {
449 debug("get_port_status failed\n");
450 if (get_timer(0) >= hub->connect_timeout) {
451 debug("devnum=%d port=%d: timeout\n",
452 dev->devnum, i + 1);
453 /* Remove this device from scanning list */
454 list_del(&usb_scan->list);
455 free(usb_scan);
456 return 0;
457 }
Marek Vasutd81db482016-05-03 22:22:59 +0200458 return 0;
Stefan Roesec998da02016-03-15 13:59:15 +0100459 }
460
461 portstatus = le16_to_cpu(portsts->wPortStatus);
462 portchange = le16_to_cpu(portsts->wPortChange);
463 debug("Port %d Status %X Change %X\n", i + 1, portstatus, portchange);
464
Bin Mengf7a9e5d2017-07-19 21:49:57 +0800465 /*
466 * No connection change happened, wait a bit more.
467 *
468 * For some situation, the hub reports no connection change but a
469 * device is connected to the port (eg: CCS bit is set but CSC is not
470 * in the PORTSC register of a root hub), ignore such case.
471 */
472 if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
473 !(portstatus & USB_PORT_STAT_CONNECTION)) {
Stefan Roesec998da02016-03-15 13:59:15 +0100474 if (get_timer(0) >= hub->connect_timeout) {
475 debug("devnum=%d port=%d: timeout\n",
476 dev->devnum, i + 1);
477 /* Remove this device from scanning list */
478 list_del(&usb_scan->list);
479 free(usb_scan);
480 return 0;
481 }
482 return 0;
483 }
484
Bin Mengb9020352017-09-18 06:40:45 -0700485 if (portchange & USB_PORT_STAT_C_RESET) {
486 debug("port %d reset change\n", i + 1);
487 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET);
488 }
489
Bin Meng061895f2017-09-18 06:40:46 -0700490 if ((portchange & USB_SS_PORT_STAT_C_BH_RESET) &&
491 usb_hub_is_superspeed(dev)) {
492 debug("port %d BH reset change\n", i + 1);
493 usb_clear_port_feature(dev, i + 1, USB_SS_PORT_FEAT_C_BH_RESET);
494 }
495
Stefan Roesec998da02016-03-15 13:59:15 +0100496 /* A new USB device is ready at this point */
497 debug("devnum=%d port=%d: USB dev found\n", dev->devnum, i + 1);
498
499 usb_hub_port_connect_change(dev, i);
500
501 if (portchange & USB_PORT_STAT_C_ENABLE) {
502 debug("port %d enable change, status %x\n", i + 1, portstatus);
503 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
504 /*
505 * The following hack causes a ghost device problem
506 * to Faraday EHCI
507 */
508#ifndef CONFIG_USB_EHCI_FARADAY
509 /*
510 * EM interference sometimes causes bad shielded USB
511 * devices to be shutdown by the hub, this hack enables
512 * them again. Works at least with mouse driver
513 */
514 if (!(portstatus & USB_PORT_STAT_ENABLE) &&
515 (portstatus & USB_PORT_STAT_CONNECTION) &&
516 usb_device_has_child_on_port(dev, i)) {
517 debug("already running port %i disabled by hub (EMI?), re-enabling...\n",
518 i + 1);
519 usb_hub_port_connect_change(dev, i);
520 }
521#endif
522 }
523
524 if (portstatus & USB_PORT_STAT_SUSPEND) {
525 debug("port %d suspend change\n", i + 1);
526 usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND);
527 }
528
529 if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
530 debug("port %d over-current change\n", i + 1);
531 usb_clear_port_feature(dev, i + 1,
532 USB_PORT_FEAT_C_OVER_CURRENT);
533 /* Only power-on this one port */
534 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
535 hub->overcurrent_count[i]++;
536
537 /*
538 * If the max-scan-count is not reached, return without removing
539 * the device from scan-list. This will re-issue a new scan.
540 */
541 if (hub->overcurrent_count[i] <=
542 PORT_OVERCURRENT_MAX_SCAN_COUNT)
543 return 0;
544
545 /* Otherwise the device will get removed */
Vagrant Cascadianeae4b2b2016-04-30 19:18:00 -0700546 printf("Port %d over-current occurred %d times\n", i + 1,
Stefan Roesec998da02016-03-15 13:59:15 +0100547 hub->overcurrent_count[i]);
548 }
549
Stefan Roesec998da02016-03-15 13:59:15 +0100550 /*
551 * We're done with this device, so let's remove this device from
552 * scanning list
553 */
554 list_del(&usb_scan->list);
555 free(usb_scan);
556
557 return 0;
558}
559
560static int usb_device_list_scan(void)
561{
562 struct usb_device_scan *usb_scan;
563 struct usb_device_scan *tmp;
564 static int running;
565 int ret = 0;
566
567 /* Only run this loop once for each controller */
568 if (running)
569 return 0;
570
571 running = 1;
572
573 while (1) {
574 /* We're done, once the list is empty again */
575 if (list_empty(&usb_scan_list))
576 goto out;
577
578 list_for_each_entry_safe(usb_scan, tmp, &usb_scan_list, list) {
579 int ret;
580
581 /* Scan this port */
582 ret = usb_scan_port(usb_scan);
583 if (ret)
584 goto out;
585 }
586 }
587
588out:
589 /*
590 * This USB controller has finished scanning all its connected
591 * USB devices. Set "running" back to 0, so that other USB controllers
592 * will scan their devices too.
593 */
594 running = 0;
595
596 return ret;
597}
Marek Vasut23faf2b2012-02-13 18:58:17 +0000598
Bin Mengdfa96e02017-07-19 21:51:09 +0800599static struct usb_hub_device *usb_get_hub_device(struct usb_device *dev)
600{
601 struct usb_hub_device *hub;
602
Sven Schwermerfd09c202018-11-21 08:43:56 +0100603#if !CONFIG_IS_ENABLED(DM_USB)
Bin Mengdfa96e02017-07-19 21:51:09 +0800604 /* "allocate" Hub device */
605 hub = usb_hub_allocate();
606#else
607 hub = dev_get_uclass_priv(dev->dev);
608#endif
609
610 return hub;
611}
612
Marek Vasut23faf2b2012-02-13 18:58:17 +0000613static int usb_hub_configure(struct usb_device *dev)
614{
Julius Wernereaf3e612013-07-19 13:12:08 -0700615 int i, length;
Puneet Saxenaf5766132012-04-03 14:56:06 +0530616 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
617 unsigned char *bitmap;
Lucas Stach93ad9082012-09-06 08:00:13 +0200618 short hubCharacteristics;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000619 struct usb_hub_descriptor *descriptor;
620 struct usb_hub_device *hub;
Simon Glass0ad04582017-12-04 13:48:22 -0700621 struct usb_hub_status *hubsts;
Simon Glass361ad6a2015-03-25 12:22:09 -0600622 int ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000623
Bin Mengdfa96e02017-07-19 21:51:09 +0800624 hub = usb_get_hub_device(dev);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000625 if (hub == NULL)
Simon Glass361ad6a2015-03-25 12:22:09 -0600626 return -ENOMEM;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000627 hub->pusb_dev = dev;
Bin Mengdfa96e02017-07-19 21:51:09 +0800628
Marek Vasut23faf2b2012-02-13 18:58:17 +0000629 /* Get the the hub descriptor */
Simon Glass361ad6a2015-03-25 12:22:09 -0600630 ret = usb_get_hub_descriptor(dev, buffer, 4);
631 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530632 debug("usb_hub_configure: failed to get hub " \
633 "descriptor, giving up %lX\n", dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600634 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000635 }
636 descriptor = (struct usb_hub_descriptor *)buffer;
637
Masahiro Yamadab4141192014-11-07 03:03:31 +0900638 length = min_t(int, descriptor->bLength,
639 sizeof(struct usb_hub_descriptor));
Marek Vasut23faf2b2012-02-13 18:58:17 +0000640
Simon Glass361ad6a2015-03-25 12:22:09 -0600641 ret = usb_get_hub_descriptor(dev, buffer, length);
642 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530643 debug("usb_hub_configure: failed to get hub " \
644 "descriptor 2nd giving up %lX\n", dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600645 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000646 }
Julius Wernereaf3e612013-07-19 13:12:08 -0700647 memcpy((unsigned char *)&hub->desc, buffer, length);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000648 /* adjust 16bit values */
Lucas Stach93ad9082012-09-06 08:00:13 +0200649 put_unaligned(le16_to_cpu(get_unaligned(
650 &descriptor->wHubCharacteristics)),
651 &hub->desc.wHubCharacteristics);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000652 /* set the bitmap */
Bin Meng337fc7e2017-07-19 21:50:00 +0800653 bitmap = (unsigned char *)&hub->desc.u.hs.DeviceRemovable[0];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000654 /* devices not removable by default */
655 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
Bin Meng337fc7e2017-07-19 21:50:00 +0800656 bitmap = (unsigned char *)&hub->desc.u.hs.PortPowerCtrlMask[0];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000657 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
658
659 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
Bin Meng337fc7e2017-07-19 21:50:00 +0800660 hub->desc.u.hs.DeviceRemovable[i] =
661 descriptor->u.hs.DeviceRemovable[i];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000662
663 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
Bin Meng337fc7e2017-07-19 21:50:00 +0800664 hub->desc.u.hs.PortPowerCtrlMask[i] =
665 descriptor->u.hs.PortPowerCtrlMask[i];
Marek Vasut23faf2b2012-02-13 18:58:17 +0000666
667 dev->maxchild = descriptor->bNbrPorts;
Vivek Gautamceb49722013-04-12 16:34:33 +0530668 debug("%d ports detected\n", dev->maxchild);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000669
Lucas Stach93ad9082012-09-06 08:00:13 +0200670 hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
671 switch (hubCharacteristics & HUB_CHAR_LPSM) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000672 case 0x00:
Vivek Gautamceb49722013-04-12 16:34:33 +0530673 debug("ganged power switching\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000674 break;
675 case 0x01:
Vivek Gautamceb49722013-04-12 16:34:33 +0530676 debug("individual port power switching\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000677 break;
678 case 0x02:
679 case 0x03:
Vivek Gautamceb49722013-04-12 16:34:33 +0530680 debug("unknown reserved power switching mode\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000681 break;
682 }
683
Lucas Stach93ad9082012-09-06 08:00:13 +0200684 if (hubCharacteristics & HUB_CHAR_COMPOUND)
Vivek Gautamceb49722013-04-12 16:34:33 +0530685 debug("part of a compound device\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000686 else
Vivek Gautamceb49722013-04-12 16:34:33 +0530687 debug("standalone hub\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000688
Lucas Stach93ad9082012-09-06 08:00:13 +0200689 switch (hubCharacteristics & HUB_CHAR_OCPM) {
Marek Vasut23faf2b2012-02-13 18:58:17 +0000690 case 0x00:
Vivek Gautamceb49722013-04-12 16:34:33 +0530691 debug("global over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000692 break;
693 case 0x08:
Vivek Gautamceb49722013-04-12 16:34:33 +0530694 debug("individual port over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000695 break;
696 case 0x10:
697 case 0x18:
Vivek Gautamceb49722013-04-12 16:34:33 +0530698 debug("no over-current protection\n");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000699 break;
700 }
701
Bin Meng5624dfd2017-07-19 21:51:16 +0800702 switch (dev->descriptor.bDeviceProtocol) {
703 case USB_HUB_PR_FS:
704 break;
705 case USB_HUB_PR_HS_SINGLE_TT:
706 debug("Single TT\n");
707 break;
708 case USB_HUB_PR_HS_MULTI_TT:
709 ret = usb_set_interface(dev, 0, 1);
710 if (ret == 0) {
711 debug("TT per port\n");
712 hub->tt.multi = true;
713 } else {
714 debug("Using single TT (err %d)\n", ret);
715 }
716 break;
717 case USB_HUB_PR_SS:
718 /* USB 3.0 hubs don't have a TT */
719 break;
720 default:
721 debug("Unrecognized hub protocol %d\n",
722 dev->descriptor.bDeviceProtocol);
723 break;
724 }
725
726 /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
727 switch (hubCharacteristics & HUB_CHAR_TTTT) {
728 case HUB_TTTT_8_BITS:
729 if (dev->descriptor.bDeviceProtocol != 0) {
730 hub->tt.think_time = 666;
731 debug("TT requires at most %d FS bit times (%d ns)\n",
732 8, hub->tt.think_time);
733 }
734 break;
735 case HUB_TTTT_16_BITS:
736 hub->tt.think_time = 666 * 2;
737 debug("TT requires at most %d FS bit times (%d ns)\n",
738 16, hub->tt.think_time);
739 break;
740 case HUB_TTTT_24_BITS:
741 hub->tt.think_time = 666 * 3;
742 debug("TT requires at most %d FS bit times (%d ns)\n",
743 24, hub->tt.think_time);
744 break;
745 case HUB_TTTT_32_BITS:
746 hub->tt.think_time = 666 * 4;
747 debug("TT requires at most %d FS bit times (%d ns)\n",
748 32, hub->tt.think_time);
749 break;
750 }
751
Vivek Gautamceb49722013-04-12 16:34:33 +0530752 debug("power on to power good time: %dms\n",
753 descriptor->bPwrOn2PwrGood * 2);
754 debug("hub controller current requirement: %dmA\n",
755 descriptor->bHubContrCurrent);
Marek Vasut23faf2b2012-02-13 18:58:17 +0000756
757 for (i = 0; i < dev->maxchild; i++)
Vivek Gautamceb49722013-04-12 16:34:33 +0530758 debug("port %d is%s removable\n", i + 1,
Bin Meng337fc7e2017-07-19 21:50:00 +0800759 hub->desc.u.hs.DeviceRemovable[(i + 1) / 8] & \
Vivek Gautamceb49722013-04-12 16:34:33 +0530760 (1 << ((i + 1) % 8)) ? " not" : "");
Marek Vasut23faf2b2012-02-13 18:58:17 +0000761
762 if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530763 debug("usb_hub_configure: failed to get Status - " \
764 "too long: %d\n", descriptor->bLength);
Simon Glass361ad6a2015-03-25 12:22:09 -0600765 return -EFBIG;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000766 }
767
Simon Glass361ad6a2015-03-25 12:22:09 -0600768 ret = usb_get_hub_status(dev, buffer);
769 if (ret < 0) {
Vivek Gautamceb49722013-04-12 16:34:33 +0530770 debug("usb_hub_configure: failed to get Status %lX\n",
771 dev->status);
Simon Glass361ad6a2015-03-25 12:22:09 -0600772 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000773 }
774
Marek Vasut23faf2b2012-02-13 18:58:17 +0000775 hubsts = (struct usb_hub_status *)buffer;
Vivek Gautamceb49722013-04-12 16:34:33 +0530776
777 debug("get_hub_status returned status %X, change %X\n",
778 le16_to_cpu(hubsts->wHubStatus),
779 le16_to_cpu(hubsts->wHubChange));
780 debug("local power source is %s\n",
781 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
782 "lost (inactive)" : "good");
783 debug("%sover-current condition exists\n",
784 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
785 "" : "no ");
Bin Mengbbc6f062017-07-19 21:51:13 +0800786
Sven Schwermerfd09c202018-11-21 08:43:56 +0100787#if CONFIG_IS_ENABLED(DM_USB)
Bin Mengbbc6f062017-07-19 21:51:13 +0800788 /*
Bin Meng81060bb2017-07-19 21:51:18 +0800789 * Update USB host controller's internal representation of this hub
790 * after the hub descriptor is fetched.
791 */
792 ret = usb_update_hub_device(dev);
793 if (ret < 0 && ret != -ENOSYS) {
794 debug("%s: failed to update hub device for HCD (%x)\n",
795 __func__, ret);
796 return ret;
797 }
798
799 /*
Bin Mengbbc6f062017-07-19 21:51:13 +0800800 * A maximum of seven tiers are allowed in a USB topology, and the
801 * root hub occupies the first tier. The last tier ends with a normal
802 * USB device. USB 3.0 hubs use a 20-bit field called 'route string'
803 * to route packets to the designated downstream port. The hub uses a
804 * hub depth value multiplied by four as an offset into the 'route
805 * string' to locate the bits it uses to determine the downstream
806 * port number.
807 */
808 if (usb_hub_is_root_hub(dev->dev)) {
809 hub->hub_depth = -1;
810 } else {
811 struct udevice *hdev;
812 int depth = 0;
813
814 hdev = dev->dev->parent;
815 while (!usb_hub_is_root_hub(hdev)) {
816 depth++;
817 hdev = hdev->parent;
818 }
819
820 hub->hub_depth = depth;
821
822 if (usb_hub_is_superspeed(dev)) {
823 debug("set hub (%p) depth to %d\n", dev, depth);
824 /*
825 * This request sets the value that the hub uses to
826 * determine the index into the 'route string index'
827 * for this hub.
828 */
829 ret = usb_set_hub_depth(dev, depth);
830 if (ret < 0) {
831 debug("%s: failed to set hub depth (%lX)\n",
832 __func__, dev->status);
833 return ret;
834 }
835 }
836 }
837#endif
838
Marek Vasut23faf2b2012-02-13 18:58:17 +0000839 usb_hub_power_on(hub);
840
Dan Murphy3615a992013-08-01 14:06:01 -0500841 /*
842 * Reset any devices that may be in a bad state when applying
843 * the power. This is a __weak function. Resetting of the devices
844 * should occur in the board file of the device.
845 */
846 for (i = 0; i < dev->maxchild; i++)
Philipp Tomsich883946e2017-11-22 17:15:17 +0100847 usb_hub_reset_devices(hub, i + 1);
Dan Murphy3615a992013-08-01 14:06:01 -0500848
Stefan Roesec998da02016-03-15 13:59:15 +0100849 /*
850 * Only add the connected USB devices, including potential hubs,
851 * to a scanning list. This list will get scanned and devices that
852 * are detected (either via port connected or via port timeout)
853 * will get removed from this list. Scanning of the devices on this
854 * list will continue until all devices are removed.
855 */
Marek Vasut23faf2b2012-02-13 18:58:17 +0000856 for (i = 0; i < dev->maxchild; i++) {
Stefan Roesec998da02016-03-15 13:59:15 +0100857 struct usb_device_scan *usb_scan;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000858
Stefan Roesec998da02016-03-15 13:59:15 +0100859 usb_scan = calloc(1, sizeof(*usb_scan));
860 if (!usb_scan) {
861 printf("Can't allocate memory for USB device!\n");
862 return -ENOMEM;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000863 }
Stefan Roesec998da02016-03-15 13:59:15 +0100864 usb_scan->dev = dev;
865 usb_scan->hub = hub;
866 usb_scan->port = i;
867 list_add_tail(&usb_scan->list, &usb_scan_list);
868 }
Marek Vasut23faf2b2012-02-13 18:58:17 +0000869
Stefan Roesec998da02016-03-15 13:59:15 +0100870 /*
871 * And now call the scanning code which loops over the generated list
872 */
873 ret = usb_device_list_scan();
Marek Vasut23faf2b2012-02-13 18:58:17 +0000874
Stefan Roesec998da02016-03-15 13:59:15 +0100875 return ret;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000876}
877
Simon Glass361ad6a2015-03-25 12:22:09 -0600878static int usb_hub_check(struct usb_device *dev, int ifnum)
Marek Vasut23faf2b2012-02-13 18:58:17 +0000879{
880 struct usb_interface *iface;
Simon Glass361ad6a2015-03-25 12:22:09 -0600881 struct usb_endpoint_descriptor *ep = NULL;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000882
883 iface = &dev->config.if_desc[ifnum];
884 /* Is it a hub? */
885 if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
Simon Glass361ad6a2015-03-25 12:22:09 -0600886 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000887 /* Some hubs have a subclass of 1, which AFAICT according to the */
888 /* specs is not defined, but it works */
889 if ((iface->desc.bInterfaceSubClass != 0) &&
890 (iface->desc.bInterfaceSubClass != 1))
Simon Glass361ad6a2015-03-25 12:22:09 -0600891 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000892 /* Multiple endpoints? What kind of mutant ninja-hub is this? */
893 if (iface->desc.bNumEndpoints != 1)
Simon Glass361ad6a2015-03-25 12:22:09 -0600894 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000895 ep = &iface->ep_desc[0];
896 /* Output endpoint? Curiousier and curiousier.. */
897 if (!(ep->bEndpointAddress & USB_DIR_IN))
Simon Glass361ad6a2015-03-25 12:22:09 -0600898 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000899 /* If it's not an interrupt endpoint, we'd better punt! */
900 if ((ep->bmAttributes & 3) != 3)
Simon Glass361ad6a2015-03-25 12:22:09 -0600901 goto err;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000902 /* We found a hub */
Vivek Gautamceb49722013-04-12 16:34:33 +0530903 debug("USB hub found\n");
Simon Glass361ad6a2015-03-25 12:22:09 -0600904 return 0;
905
906err:
907 debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n",
908 iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass,
909 iface->desc.bNumEndpoints);
910 if (ep) {
911 debug(" bEndpointAddress=%#x, bmAttributes=%d",
912 ep->bEndpointAddress, ep->bmAttributes);
913 }
914
915 return -ENOENT;
916}
917
918int usb_hub_probe(struct usb_device *dev, int ifnum)
919{
920 int ret;
921
922 ret = usb_hub_check(dev, ifnum);
923 if (ret)
924 return 0;
Marek Vasut23faf2b2012-02-13 18:58:17 +0000925 ret = usb_hub_configure(dev);
926 return ret;
927}
Simon Glass054fe482015-03-25 12:22:10 -0600928
Sven Schwermerfd09c202018-11-21 08:43:56 +0100929#if CONFIG_IS_ENABLED(DM_USB)
Simon Glass054fe482015-03-25 12:22:10 -0600930int usb_hub_scan(struct udevice *hub)
931{
Simon Glassbcbe3d12015-09-28 23:32:01 -0600932 struct usb_device *udev = dev_get_parent_priv(hub);
Simon Glass054fe482015-03-25 12:22:10 -0600933
934 return usb_hub_configure(udev);
935}
936
Simon Glass054fe482015-03-25 12:22:10 -0600937static int usb_hub_post_probe(struct udevice *dev)
938{
939 debug("%s\n", __func__);
940 return usb_hub_scan(dev);
941}
942
943static const struct udevice_id usb_hub_ids[] = {
944 { .compatible = "usb-hub" },
945 { }
946};
947
948U_BOOT_DRIVER(usb_generic_hub) = {
949 .name = "usb_hub",
950 .id = UCLASS_USB_HUB,
951 .of_match = usb_hub_ids,
952 .flags = DM_FLAG_ALLOC_PRIV_DMA,
953};
954
955UCLASS_DRIVER(usb_hub) = {
956 .id = UCLASS_USB_HUB,
957 .name = "usb_hub",
Simon Glass91195482016-07-05 17:10:10 -0600958 .post_bind = dm_scan_fdt_dev,
Simon Glass054fe482015-03-25 12:22:10 -0600959 .post_probe = usb_hub_post_probe,
960 .child_pre_probe = usb_child_pre_probe,
961 .per_child_auto_alloc_size = sizeof(struct usb_device),
962 .per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
Bin Mengdfa96e02017-07-19 21:51:09 +0800963 .per_device_auto_alloc_size = sizeof(struct usb_hub_device),
Simon Glass054fe482015-03-25 12:22:10 -0600964};
965
966static const struct usb_device_id hub_id_table[] = {
967 {
968 .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
969 .bDeviceClass = USB_CLASS_HUB
970 },
971 { } /* Terminating entry */
972};
973
Simon Glassabb59cf2015-07-06 16:47:51 -0600974U_BOOT_USB_DEVICE(usb_generic_hub, hub_id_table);
Simon Glass054fe482015-03-25 12:22:10 -0600975
976#endif