blob: ba6a43062a6301651f4e73c8e30c22a31902609e [file] [log] [blame]
Egli, Samuelf04776b2014-05-05 16:50:44 +02001/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_DRACO_H
14#define __CONFIG_DRACO_H
15
16#define CONFIG_SIEMENS_DRACO
Egli, Samuelf04776b2014-05-05 16:50:44 +020017#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO
18
19#include "siemens-am33x-common.h"
20
Egli, Samuelf04776b2014-05-05 16:50:44 +020021#define DDR_PLL_FREQ 303
22#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
23
Heiko Schocher61159b72015-06-16 14:59:34 +020024#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
Egli, Samuelf04776b2014-05-05 16:50:44 +020025#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
26
Heiko Schocher61159b72015-06-16 14:59:34 +020027#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
28 "button_dfu0=27\0" \
29 "led0=103,1,0\0" \
30 "led1=64,0,1\0"
31
Egli, Samuelf04776b2014-05-05 16:50:44 +020032 /* Physical Memory Map */
33#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
34
35/* I2C Configuration */
36#define CONFIG_SYS_I2C_SPEED 100000
37
38#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
39#define EEPROM_ADDR_DDR3 0x90
40#define EEPROM_ADDR_CHIP 0x120
41
Egli, Samuelf04776b2014-05-05 16:50:44 +020042#undef CONFIG_MII
43#undef CONFIG_PHY_GIGE
44#define CONFIG_PHY_SMSC
45
46#define CONFIG_FACTORYSET
47
Heiko Schocher61159b72015-06-16 14:59:34 +020048/* Define own nand partitions */
49#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
50#define CONFIG_ENV_SIZE_REDUND 0x2000
51#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
52
Heiko Schocher61159b72015-06-16 14:59:34 +020053#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
54
Egli, Samuelf04776b2014-05-05 16:50:44 +020055#ifndef CONFIG_SPL_BUILD
56
57/* Default env settings */
58#define CONFIG_EXTRA_ENV_SETTINGS \
Heiko Schocher61159b72015-06-16 14:59:34 +020059 "hostname=draco\0" \
Heiko Schocher6b3943f2016-06-07 08:55:45 +020060 "ubi_off=2048\0"\
Egli, Samuelf04776b2014-05-05 16:50:44 +020061 "nand_img_size=0x400000\0" \
62 "optargs=\0" \
Heiko Schocher61159b72015-06-16 14:59:34 +020063 "preboot=draco_led 0\0" \
64 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
65 CONFIG_ENV_SETTINGS_V2 \
66 CONFIG_ENV_SETTINGS_NAND_V2
Egli, Samuelf04776b2014-05-05 16:50:44 +020067
68#ifndef CONFIG_RESTORE_FLASH
69/* set to negative value for no autoboot */
Egli, Samuelf04776b2014-05-05 16:50:44 +020070
71#define CONFIG_BOOTCOMMAND \
72"if dfubutton; then " \
73 "run dfu_start; " \
74 "reset; " \
75"fi;" \
76"run nand_boot;" \
Heiko Schocher61159b72015-06-16 14:59:34 +020077"run nand_boot_backup;" \
Egli, Samuelf04776b2014-05-05 16:50:44 +020078"reset;"
79
Egli, Samuelf04776b2014-05-05 16:50:44 +020080#else
Egli, Samuelf04776b2014-05-05 16:50:44 +020081
82#define CONFIG_BOOTCOMMAND \
83 "setenv autoload no; " \
84 "dhcp; " \
85 "if tftp 80000000 debrick.scr; then " \
86 "source 80000000; " \
87 "fi"
88#endif
89#endif /* CONFIG_SPL_BUILD */
90#endif /* ! __CONFIG_DRACO_H */