blob: 4bd88634819540aff321e0b172d1a07bfa9242ee [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000.
3 * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __MPC824X_H__
25#define __MPC824X_H__
26
27#include <config.h>
28
29/* CPU Types */
30#define CPU_TYPE_601 0x01 /* PPC 601 CPU */
31#define CPU_TYPE_602 0x02 /* PPC 602 CPU */
32#define CPU_TYPE_603 0x03 /* PPC 603 CPU */
33#define CPU_TYPE_603E 0x06 /* PPC 603e CPU */
34#define CPU_TYPE_603P 0x07 /* PPC 603p CPU */
35#define CPU_TYPE_604 0x04 /* PPC 604 CPU */
36#define CPU_TYPE_604E 0x09 /* PPC 604e CPU */
37#define CPU_TYPE_604R 0x0a /* PPC 604r CPU */
38#define CPU_TYPE_750 0x08 /* PPC 750 CPU */
39#define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */
40#define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */
41#define _CACHE_ALIGN_SIZE 32 /* cache line size */
42
43/* spr976 - DMISS data tlb miss address register
44 * spr977 - DCMP data tlb miss compare register
45 * spr978 - HASH1 PTEG1 address register
46 * spr980 - HASH2 PTEG2 address register
47 * IMISS - instruction tlb miss address register
48 * ICMP - instruction TLB mis compare register
49 * RPA - real page address register
50 * HID0 - hardware implemntation register
51 * HID2 - instruction address breakpoint register
52 */
53
54/* Kahlua/MPC8240 defines */
55#define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */
56#define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */
57#define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */
58#define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */
59#define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */
60#define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */
61#define CHRP_ISA_MEM_PHYS 0xfd000000
62#define CHRP_ISA_MEM_BUS 0x00000000
63#define CHRP_ISA_MEM_SIZE 0x01000000
64#define CHRP_ISA_IO_PHYS 0xfe000000
65#define CHRP_ISA_IO_BUS 0x00000000
66#define CHRP_ISA_IO_SIZE 0x00800000
67#define CHRP_PCI_IO_PHYS 0xfe800000
68#define CHRP_PCI_IO_BUS 0x00800000
69#define CHRP_PCI_IO_SIZE 0x00400000
70#define CHRP_PCI_MEM_PHYS 0x80000000
71#define CHRP_PCI_MEM_BUS 0x80000000
72#define CHRP_PCI_MEM_SIZE 0x7d000000
73#define CHRP_PCI_MEMORY_PHYS 0x00000000
74#define CHRP_PCI_MEMORY_BUS 0x00000000
75#define CHRP_PCI_MEMORY_SIZE 0x40000000
76#define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */
77#define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */
78#define PREP_ISA_IO_PHYS 0x80000000
79#define PREP_ISA_IO_BUS 0x00000000
80#define PREP_ISA_IO_SIZE 0x00800000
81#define PREP_PCI_IO_PHYS 0x81000000
82#define PREP_PCI_IO_BUS 0x01000000
83#define PREP_PCI_IO_SIZE 0x3e800000
84#define PREP_PCI_MEM_PHYS 0xc0000000
85#define PREP_PCI_MEM_BUS 0x00000000
86#define PREP_PCI_MEM_SIZE 0x3f000000
87#define PREP_PCI_MEMORY_PHYS 0x00000000
88#define PREP_PCI_MEMORY_BUS 0x80000000
89#define PREP_PCI_MEMORY_SIZE 0x80000000
90#define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */
91#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */
92#define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */
93#define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */
94#define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */
95#define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */
96#define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */
97#define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */
98#define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */
99#define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */
100#define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */
101#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/
102#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/
103#define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */
104#define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */
105#define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */
106#define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/
107#define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */
108#define MEM_EN_ADR 0x800000a0 /* Memory bank enable */
109#define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */
110
111/*-----------------------------------------------------------------------
112 * Exception offsets (PowerPC standard)
113 */
114#define EXC_OFF_RESERVED0 0x0000 /* Reserved */
115#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
116#define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */
117#define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */
118#define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */
119#define EXC_OFF_EXTERNAL 0x0500 /* External */
120#define EXC_OFF_ALIGN 0x0600 /* Alignment */
121#define EXC_OFF_PROGRAM 0x0700 /* Program */
122#define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */
123#define EXC_OFF_DECR 0x0900 /* Decrementer */
124#define EXC_OFF_RESERVED1 0x0A00 /* Reserved */
125#define EXC_OFF_RESERVED2 0x0B00 /* Reserved */
126#define EXC_OFF_SYS_CALL 0x0C00 /* System Call */
127#define EXC_OFF_TRACE 0x0D00 /* Trace */
128#define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */
129
130 /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */
131 /* these found in DINK code - may not apply to 8240*/
132#define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */
133#define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */
134
135 /* 0x1000 - 0x2FFF are implementation specific */
136 /* these found in DINK code - may not apply to 8240 */
137#define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */
138#define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */
139#define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */
140#define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */
141#define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */
142#define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/
143#define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */
144
Rafal Jaworowski02032e82007-06-22 14:58:04 +0200145#define _START_OFFSET EXC_OFF_SYS_RESET
146
wdenkc6097192002-11-03 00:24:07 +0000147#define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */
148#define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */
149#define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */
150#define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */
151#define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */
152#define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */
153#define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */
154#define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */
155
156
157#if defined(CFG_ADDR_MAP_A)
158#define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
159#define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
160#define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
161#define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
162#else /* Assume Map B, default */
163#define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
164#define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
165#define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
166#define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
167#endif
168
169#define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW)
170
171#define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW)
172
173/* Macros to write to config registers. addr should be a constant in all cases */
174
175#define CONFIG_WRITE_BYTE( addr, data ) \
176 __asm__ __volatile__( \
177 " stwbrx %1, 0, %0\n \
178 sync\n \
179 stb %3, %4(%2)\n \
180 sync " \
181 : /* no output */ \
182 : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
183 "b" (CONFIG_DATA), "r" (data), \
184 "n" ((addr) & 3));
185
186#define CONFIG_WRITE_HALFWORD( addr, data ) \
187 __asm__ __volatile__( \
188 " stwbrx %1, 0, %0\n \
189 sync\n \
190 sthbrx %3, %4, %2\n \
191 sync " \
192 : /* no output */ \
193 : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
194 "r" (CONFIG_DATA), "r" (data), \
195 "b" ((addr) & 3));
196
197/* this assumes it's writeing on word boundaries*/
198#define CONFIG_WRITE_WORD( addr, data ) \
199 __asm__ __volatile__( \
200 " stwbrx %1, 0, %0\n \
201 sync\n \
202 stwbrx %3, 0, %2\n \
203 sync " \
204 : /* no output */ \
205 : "r" (CONFIG_ADDR), "r" (addr), \
206 "r" (CONFIG_DATA), "r" (data));
207
208/* Configuration register reads*/
209
210#define CONFIG_READ_BYTE( addr, reg ) \
211 __asm__ ( \
212 " stwbrx %1, 0, %2\n \
213 sync\n \
214 lbz %0, %4(%3)\n \
215 sync " \
216 : "=r" (reg) \
217 : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
218 "b" (CONFIG_DATA), "n" ((addr) & 3));
219
220
221#define CONFIG_READ_HALFWORD( addr, reg ) \
222 __asm__ ( \
223 " stwbrx %1, 0, %2\n \
224 sync\n \
225 lhbrx %0, %4, %3\n \
226 sync " \
227 : "=r" (reg) \
228 : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
229 "r" (CONFIG_DATA), \
230 "b" ((addr) & 3));
231
232/* this assumes it's reading on word boundaries*/
233#define CONFIG_READ_WORD( addr, reg ) \
234 __asm__ ( \
235 " stwbrx %1, 0, %2\n \
236 sync\n \
237 lwbrx %0, 0, %3\n \
238 sync " \
239 : "=r" (reg) \
240 : "r" (addr), "r" (CONFIG_ADDR),\
241 "r" (CONFIG_DATA));
242
243/*
244 * configuration register 'addresses'.
245 * These are described in chaper 5 of the 8240 users manual.
246 * Where the register has an abreviation in the manual, this has
247 * been usaed here, otherwise a name in keeping with the norm has
248 * been invented.
249 * Note that some of these registers aren't documented in the manual.
250 */
251
252#define PCICR 0x80000004 /* PCI Command Register */
253#define PCISR 0x80000006 /* PCI Status Register */
254#define REVID 0x80000008 /* CPU revision id */
255#define PIR 0x80000009 /* PCI Programming Interface Register */
256#define PBCCR 0x8000000b /* PCI Base Class Code Register */
257#define PCLSR 0x8000000c /* Processor Cache Line Size Register */
258#define PLTR 0x8000000d /* PCI Latancy Timer Register */
259#define PHTR 0x8000000e /* PCI Header Type Register */
260#define BISTCTRL 0x8000000f /* BIST Control */
261#define LMBAR 0x80000010 /* Local Base Addres Register */
262#define PCSRBAR 0x80000014 /* PCSR Base Address Register */
263#define ILR 0x8000003c /* PCI Interrupt Line Register */
264#define IPR 0x8000003d /* Interrupt Pin Register */
265#define MINGNT 0x8000003e /* MIN GNI */
266#define MAXLAT 0x8000003f /* MAX LAT */
267#define PCIACR 0x80000046 /* PCI Arbiter Control Register */
268#define PMCR1 0x80000070 /* Power management config. 1 */
269#define PMCR2 0x80000072 /* Power management config. 2 */
270#define ODCR 0x80000073 /* Output Driver Control Register */
271#define CLKDCR 0x80000074 /* CLK Driver Control Register */
272#if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
273#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
274#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
275#endif
276#define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */
277#define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */
278#define EUMBSIZE 0x00100000 /* Size of EUMB region */
279
280#define MSAR1 0x80000080 /* Memory Starting Address Register 1 */
281#define MSAR2 0x80000084 /* Memory Starting Address Register 2 */
282#define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/
283#define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/
284#define MEAR1 0x80000090 /* Memory Ending Address Register 1 */
285#define MEAR2 0x80000094 /* Memory Ending Address Register 2 */
286#define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */
287#define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */
288#define MBER 0x800000a0 /* Memory bank Enable Register*/
289#define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */
290#define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */
291#define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */
292#define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */
293#define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */
294#define ERRENR1 0x800000c0 /* Error Enableing Register 1 */
295#define ERRENR2 0x800000c4 /* Error Enableing Register 2 */
296#define ERRDR1 0x800000c1 /* Error Detection Register 1 */
297#define IPBESR 0x800000c3 /* Internal Processor Error Status Register */
298#define ERRDR2 0x800000c5 /* Error Detection Register 2 */
299#define PBESR 0x800000c7 /* PCI Bus Error Status Register */
300#define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */
301#define AMBOR 0x800000e0 /* Address Map B Options Register */
wdenk281e00a2004-08-01 22:48:16 +0000302#define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */
wdenkc6097192002-11-03 00:24:07 +0000303#define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */
304#define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */
305#define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */
306#define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */
307
308/* some values for some of the above */
309
310#define PICR1_CF_APARK 0x00000008
311#define PICR1_LE_MODE 0x00000020
312#define PICR1_ST_GATH_EN 0x00000040
313#if defined(CONFIG_MPC8240)
314#define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */
315#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
316#define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */
317#define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */
318#define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */
319#define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */
320#define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */
321#define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */
322#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
323#define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
324#define MIOCR1_SHIFT 2
325#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
326#define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
327#define MIOCR2_SHIFT 3
328#define ODCR_ADR_X 0x80000070 /* Output Driver Control register */
329#define ODCR_SHIFT 3
330#define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */
331#define PMCR2_ADR_X 0x80000070
332#define PMCR2_SHIFT 3
333#define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */
334#else
335#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
336#endif
337#define PICR1_CF_DPARK 0x00000200
338#define PICR1_MCP_EN 0x00000800
339#define PICR1_FLASH_WR_EN 0x00001000
340#ifdef CONFIG_MPC8240
341#define PICR1_ADDRESS_MAP 0x00010000
342#define PIRC1_MSK 0xff000000
343#endif
344#define PICR1_PROC_TYPE_MSK 0x00060000
345#define PICR1_PROC_TYPE_603E 0x00040000
346#define PICR1_RCS0 0x00100000
347
348#define PICR2_CF_SNOOP_WS_MASK 0x000c0000
349#define PICR2_CF_SNOOP_WS_0WS 0x00000000
350#define PICR2_CF_SNOOP_WS_1WS 0x00040000
351#define PICR2_CF_SNOOP_WS_2WS 0x00080000
352#define PICR2_CF_SNOOP_WS_3WS 0x000c0000
353#define PICR2_CF_APHASE_WS_MASK 0x0000000c
354#define PICR2_CF_APHASE_WS_0WS 0x00000000
355#define PICR2_CF_APHASE_WS_1WS 0x00000004
356#define PICR2_CF_APHASE_WS_2WS 0x00000008
357#define PICR2_CF_APHASE_WS_3WS 0x0000000c
358
359#define MCCR1_ROMNAL_SHIFT 28
360#define MCCR1_ROMNAL_MSK 0xf0000000
361#define MCCR1_ROMFAL_SHIFT 23
362#define MCCR1_ROMFAL_MSK 0x0f800000
363#define MCCR1_DBUS_SIZE0 0x00400000
364#define MCCR1_BURST 0x00100000
365#define MCCR1_MEMGO 0x00080000
366#define MCCR1_SREN 0x00040000
367#if defined(CONFIG_MPC8240)
368#define MCCR1_RAM_TYPE 0x00020000
369#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
370#define MCCR1_SDRAM_EN 0x00020000
371#else
372#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
373#endif
374#define MCCR1_PCKEN 0x00010000
375#define MCCR1_BANK1ROW_SHIFT 2
376#define MCCR1_BANK2ROW_SHIFT 4
377#define MCCR1_BANK3ROW_SHIFT 6
378#define MCCR1_BANK4ROW_SHIFT 8
379#define MCCR1_BANK5ROW_SHIFT 10
380#define MCCR1_BANK6ROW_SHIFT 12
381#define MCCR1_BANK7ROW_SHIFT 14
382
383#define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000
384#define MCCR2_TS_WAIT_TIMER_SHIFT 29
385#define MCCR2_ASRISE_MSK 0x1e000000
386#define MCCR2_ASRISE_SHIFT 25
387#define MCCR2_ASFALL_MSK 0x01e00000
388#define MCCR2_ASFALL_SHIFT 21
389
390#define MCCR2_INLINE_PAR_NOT_ECC 0x00100000
391#define MCCR2_WRITE_PARITY_CHK 0x00080000
392#define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000
393#ifdef CONFIG_MPC8240
394#define MCCR2_ECC_EN 0x00020000
395#define MCCR2_EDO 0x00010000
396#endif
397#define MCCR2_REFINT_MSK 0x0000fffc
398#define MCCR2_REFINT_SHIFT 2
399#define MCCR2_RSV_PG 0x00000002
400#define MCCR2_PMW_PAR 0x00000001
401
402#define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/
403#define MCCR3_BSTOPRE2TO5_SHIFT 28
404#define MCCR3_REFREC_MSK 0x0f000000
405#define MCCR3_REFREC_SHIFT 24
406#ifdef CONFIG_MPC8240
407#define MCCR3_RDLAT_MSK 0x00f00000
408#define MCCR3_RDLAT_SHIFT 20
409#define MCCR3_CPX 0x00010000
410#define MCCR3_RAS6P_MSK 0x00078000
411#define MCCR3_RAS6P_SHIFT 15
412#define MCCR3_CAS5_MSK 0x00007000
413#define MCCR3_CAS5_SHIFT 12
414#define MCCR3_CP4_MSK 0x00000e00
415#define MCCR3_CP4_SHIFT 9
416#define MCCR3_CAS3_MSK 0x000001c0
417#define MCCR3_CAS3_SHIFT 6
418#define MCCR3_RCD2_MSK 0x00000038
419#define MCCR3_RCD2_SHIFT 3
420#define MCCR3_RP1_MSK 0x00000007
421#define MCCR3_RP1_SHIFT 0
422#endif
423
424#define MCCR4_PRETOACT_MSK 0xf0000000
425#define MCCR4_PRETOACT_SHIFT 28
426#define MCCR4_ACTTOPRE_MSK 0x0f000000
427#define MCCR4_ACTTOPRE_SHIFT 24
428#define MCCR4_WMODE 0x00800000
429#define MCCR4_INLINE 0x00400000
430#if defined(CONFIG_MPC8240)
431#define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/
432#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
433#define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */
434#else
435#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
436#endif
437#define MCCR4_REGISTERED 0x00100000
438#define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/
439#define MCCR4_BSTOPRE0TO1_SHIFT 18
440#define MCCR4_REGDIMM 0x00008000
441#define MCCR4_SDMODE_MSK 0x00007f00
442#define MCCR4_SDMODE_SHIFT 8
443#define MCCR4_ACTTORW_MSK 0x000000f0
444#define MCCR4_ACTTORW_SHIFT 4
445#define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/
446#define MCCR4_BSTOPRE6TO9_SHIFT 0
447#define MCCR4_DBUS_SIZE2_SHIFT 17
448
449#define MICR_ADDR_MASK 0x0ff00000
450#define MICR_ADDR_SHIFT 20
451#define MICR_EADDR_MASK 0x30000000
452#define MICR_EADDR_SHIFT 28
453
454#define BATU_BEPI_MSK 0xfffe0000
455#define BATU_BL_MSK 0x00001ffc
456
457#define BATU_BL_128K 0x00000000
458#define BATU_BL_256K 0x00000004
459#define BATU_BL_512K 0x0000000c
460#define BATU_BL_1M 0x0000001c
461#define BATU_BL_2M 0x0000003c
462#define BATU_BL_4M 0x0000007c
463#define BATU_BL_8M 0x000000fc
464#define BATU_BL_16M 0x000001fc
465#define BATU_BL_32M 0x000003fc
466#define BATU_BL_64M 0x000007fc
467#define BATU_BL_128M 0x00000ffc
468#define BATU_BL_256M 0x00001ffc
469
470#define BATU_VS 0x00000002
471#define BATU_VP 0x00000001
472
473#define BATL_BRPN_MSK 0xfffe0000
474#define BATL_WIMG_MSK 0x00000078
475
476#define BATL_WRITETHROUGH 0x00000040
477#define BATL_CACHEINHIBIT 0x00000020
478#define BATL_MEMCOHERENCE 0x00000010
479#define BATL_GUARDEDSTORAGE 0x00000008
480
481#define BATL_PP_MSK 0x00000003
482#define BATL_PP_00 0x00000000 /* No access */
483#define BATL_PP_01 0x00000001 /* Read-only */
484#define BATL_PP_10 0x00000002 /* Read-write */
485#define BATL_PP_11 0x00000003
486
487/*
488 * I'd attempt to do defines for the PP bits, but it's use is a bit
489 * too complex, see the PowerPC Operating Environment Architecture
490 * section in the PowerPc arch book, chapter 4.
491 */
492
493/*eumb and epic config*/
494
495#define EPIC_FPR 0x00041000
496#define EPIC_GCR 0x00041020
497#define EPIC_EICR 0x00041030
498#define EPIC_EVI 0x00041080
499#define EPIC_PI 0x00041090
500#define EPIC_SVR 0x000410E0
501#define EPIC_TFRR 0x000410F0
502
503/*
504 * Note the information for these is rather mangled in the 8240 manual.
505 * These are guesses.
506 */
507
508#define EPIC_GTCCR0 0x00041100
509#define EPIC_GTCCR1 0x00041140
510#define EPIC_GTCCR2 0x00041180
511#define EPIC_GTCCR3 0x000411C0
512#define EPIC_GTBCR0 0x00041110
513#define EPIC_GTBCR1 0x00041150
514#define EPIC_GTBCR2 0x00041190
515#define EPIC_GTBCR3 0x000411D0
516#define EPIC_GTVPR0 0x00041120
517#define EPIC_GTVPR1 0x00041160
518#define EPIC_GTVPR2 0x000411a0
519#define EPIC_GTVPR3 0x000411e0
520#define EPIC_GTDR0 0x00041130
521#define EPIC_GTDR1 0x00041170
522#define EPIC_GTDR2 0x000411b0
523#define EPIC_GTDR3 0x000411f0
524
525#define EPIC_IVPR0 0x00050200
526#define EPIC_IVPR1 0x00050220
527#define EPIC_IVPR2 0x00050240
528#define EPIC_IVPR3 0x00050260
529#define EPIC_IVPR4 0x00050280
530
531#define EPIC_SVPR0 0x00050200
532#define EPIC_SVPR1 0x00050220
533#define EPIC_SVPR2 0x00050240
534#define EPIC_SVPR3 0x00050260
535#define EPIC_SVPR4 0x00050280
536#define EPIC_SVPR5 0x000502A0
537#define EPIC_SVPR6 0x000502C0
538#define EPIC_SVPR7 0x000502E0
539#define EPIC_SVPR8 0x00050300
540#define EPIC_SVPR9 0x00050320
541#define EPIC_SVPRa 0x00050340
542#define EPIC_SVPRb 0x00050360
543#define EPIC_SVPRc 0x00050380
544#define EPIC_SVPRd 0x000503A0
545#define EPIC_SVPRe 0x000503C0
546#define EPIC_SVPRf 0x000503E0
547
548/* MPC8240 Byte Swap/PCI Support Macros */
549#define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) )
550#define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
551 (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) )
552#define PCISWAP(x) LONGSWAP(x)
553
554#ifndef __ASSEMBLY__
555
556/*
557 * MPC107 Support
558 *
559 */
560unsigned int mpc824x_mpc107_getreg(unsigned int regNum);
561void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal);
562void mpc824x_mpc107_write8(unsigned int address, unsigned char data);
563void mpc824x_mpc107_write16(unsigned int address, unsigned short data);
564void mpc824x_mpc107_write32(unsigned int address, unsigned int data);
565unsigned char mpc824x_mpc107_read8(unsigned int address);
566unsigned short mpc824x_mpc107_read16(unsigned int address);
567unsigned int mpc824x_mpc107_read32(unsigned int address);
568unsigned int mpc824x_eummbar_read(unsigned int regNum);
569void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal);
570
571#ifdef CONFIG_PCI
572struct pci_controller;
573void pci_cpm824x_init(struct pci_controller* hose);
574#endif
575
576#endif /* __ASSEMBLY__ */
577
578#endif /* __MPC824X_H__ */