| /* |
| * iPAQ h2200 board configuration |
| * |
| * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_MACH_TYPE MACH_TYPE_H2200 |
| |
| #define CONFIG_CPU_PXA25X 1 |
| #define CONFIG_BOARD_H2200 |
| |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 |
| |
| #define CONFIG_ENV_SIZE 0x00040000 |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
| |
| #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ |
| |
| /* |
| * iPAQ 1st stage bootloader loads 2nd stage bootloader |
| * at address 0xa0040000 but bootloader requires header |
| * which is 0x1000 long. |
| * |
| * --- Header begin --- |
| * .word 0xea0003fe ; b 0x1000 |
| * |
| * .org 0x40 |
| * .ascii "ECEC" |
| * |
| * .org 0x1000 |
| * --- Header end --- |
| */ |
| |
| /* |
| * Static chips |
| */ |
| |
| #define CONFIG_SYS_MSC0_VAL 0x246c7ffc |
| #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 |
| #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| |
| #define CONFIG_SYS_MECR_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00000000 |
| #define CONFIG_SYS_MCATT0_VAL 0x00000000 |
| #define CONFIG_SYS_MCATT1_VAL 0x00000000 |
| #define CONFIG_SYS_MCIO0_VAL 0x00000000 |
| #define CONFIG_SYS_MCIO1_VAL 0x00000000 |
| |
| #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 |
| #define CONFIG_SYS_SXCNFG_VAL 0x00040004 |
| |
| #define CONFIG_SYS_MDREFR_VAL 0x0099E018 |
| #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB |
| #define CONFIG_SYS_MDMRS_VAL 0x00220022 |
| |
| #define CONFIG_SYS_PSSR_VAL 0x00000000 |
| #define CONFIG_SYS_CKEN 0x00004840 |
| #define CONFIG_SYS_CCCR 0x00000161 |
| |
| /* |
| * GPIOs |
| */ |
| |
| #define CONFIG_SYS_GPSR0_VAL 0x01000000 |
| #define CONFIG_SYS_GPSR1_VAL 0x00000000 |
| #define CONFIG_SYS_GPSR2_VAL 0x00010000 |
| |
| #define CONFIG_SYS_GPCR0_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR1_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR2_VAL 0x00000000 |
| |
| #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 |
| #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 |
| #define CONFIG_SYS_GPDR2_VAL 0x000157FF |
| |
| #define CONFIG_SYS_GAFR0_L_VAL 0x80401000 |
| #define CONFIG_SYS_GAFR0_U_VAL 0x00000112 |
| #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 |
| #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA |
| #define CONFIG_SYS_GAFR2_L_VAL 0x20000000 |
| #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 |
| |
| /* |
| * Serial port |
| */ |
| #define CONFIG_FFUART |
| #define CONFIG_CONS_INDEX 3 |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } |
| |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_INITRD_TAG |
| |
| /* Monitor Command Prompt */ |
| |
| #define CONFIG_USB_DEV_PULLUP_GPIO 33 |
| /* USB VBUS GPIO 3 */ |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ |
| "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ |
| "source :script ; " \ |
| "bootm ; " |
| |
| #define CONFIG_USB_GADGET_PXA2XX |
| #define CONFIG_USB_ETH_SUBSET |
| |
| #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "stdin=serial\0" \ |
| "stdout=serial\0" \ |
| "stderr=serial\0" |
| |
| #endif /* __CONFIG_H */ |