| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef USE_HOSTCC |
| #include <common.h> |
| #include <boot_fit.h> |
| #include <dm.h> |
| #include <dm/of_extra.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <fdt_support.h> |
| #include <libfdt.h> |
| #include <serial.h> |
| #include <asm/sections.h> |
| #include <linux/ctype.h> |
| #include <linux/lzo.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * Here are the type we know about. One day we might allow drivers to |
| * register. For now we just put them here. The COMPAT macro allows us to |
| * turn this into a sparse list later, and keeps the ID with the name. |
| * |
| * NOTE: This list is basically a TODO list for things that need to be |
| * converted to driver model. So don't add new things here unless there is a |
| * good reason why driver-model conversion is infeasible. Examples include |
| * things which are used before driver model is available. |
| */ |
| #define COMPAT(id, name) name |
| static const char * const compat_names[COMPAT_COUNT] = { |
| COMPAT(UNKNOWN, "<none>"), |
| COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), |
| COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"), |
| COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), |
| COMPAT(NVIDIA_TEGRA124_XUSB_PADCTL, "nvidia,tegra124-xusb-padctl"), |
| COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"), |
| COMPAT(SMSC_LAN9215, "smsc,lan9215"), |
| COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"), |
| COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"), |
| COMPAT(SAMSUNG_EXYNOS5_SOUND, "samsung,exynos-sound"), |
| COMPAT(WOLFSON_WM8994_CODEC, "wolfson,wm8994-codec"), |
| COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"), |
| COMPAT(SAMSUNG_EXYNOS5_USB3_PHY, "samsung,exynos5250-usb3-phy"), |
| COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"), |
| COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"), |
| COMPAT(SAMSUNG_EXYNOS_DWMMC, "samsung,exynos-dwmmc"), |
| COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"), |
| COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686"), |
| COMPAT(GENERIC_SPI_FLASH, "spi-flash"), |
| COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"), |
| COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"), |
| COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"), |
| COMPAT(INTEL_MICROCODE, "intel,microcode"), |
| COMPAT(AMS_AS3722, "ams,as3722"), |
| COMPAT(INTEL_QRK_MRC, "intel,quark-mrc"), |
| COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"), |
| COMPAT(ALTERA_SOCFPGA_DWMMC, "altr,socfpga-dw-mshc"), |
| COMPAT(ALTERA_SOCFPGA_DWC2USB, "snps,dwc2"), |
| COMPAT(INTEL_BAYTRAIL_FSP, "intel,baytrail-fsp"), |
| COMPAT(INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"), |
| COMPAT(INTEL_IVYBRIDGE_FSP, "intel,ivybridge-fsp"), |
| COMPAT(COMPAT_SUNXI_NAND, "allwinner,sun4i-a10-nand"), |
| COMPAT(ALTERA_SOCFPGA_CLK, "altr,clk-mgr"), |
| COMPAT(ALTERA_SOCFPGA_PINCTRL_SINGLE, "pinctrl-single"), |
| COMPAT(ALTERA_SOCFPGA_H2F_BRG, "altr,socfpga-hps2fpga-bridge"), |
| COMPAT(ALTERA_SOCFPGA_LWH2F_BRG, "altr,socfpga-lwhps2fpga-bridge"), |
| COMPAT(ALTERA_SOCFPGA_F2H_BRG, "altr,socfpga-fpga2hps-bridge"), |
| COMPAT(ALTERA_SOCFPGA_F2SDR0, "altr,socfpga-fpga2sdram0-bridge"), |
| COMPAT(ALTERA_SOCFPGA_F2SDR1, "altr,socfpga-fpga2sdram1-bridge"), |
| COMPAT(ALTERA_SOCFPGA_F2SDR2, "altr,socfpga-fpga2sdram2-bridge"), |
| COMPAT(ALTERA_SOCFPGA_FPGA0, "altr,socfpga-a10-fpga-mgr"), |
| COMPAT(ALTERA_SOCFPGA_NOC, "altr,socfpga-a10-noc"), |
| }; |
| |
| const char *fdtdec_get_compatible(enum fdt_compat_id id) |
| { |
| /* We allow reading of the 'unknown' ID for testing purposes */ |
| BUG_ON(!(id >= 0 && id < COMPAT_COUNT)); |
| return compat_names[id]; |
| } |
| |
| fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, |
| const char *prop_name, int index, int na, int ns, |
| fdt_size_t *sizep, bool translate) |
| { |
| const fdt32_t *prop, *prop_end; |
| const fdt32_t *prop_addr, *prop_size, *prop_after_size; |
| int len; |
| fdt_addr_t addr; |
| |
| debug("%s: %s: ", __func__, prop_name); |
| |
| if (na > (sizeof(fdt_addr_t) / sizeof(fdt32_t))) { |
| debug("(na too large for fdt_addr_t type)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| if (ns > (sizeof(fdt_size_t) / sizeof(fdt32_t))) { |
| debug("(ns too large for fdt_size_t type)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| prop = fdt_getprop(blob, node, prop_name, &len); |
| if (!prop) { |
| debug("(not found)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| prop_end = prop + (len / sizeof(*prop)); |
| |
| prop_addr = prop + (index * (na + ns)); |
| prop_size = prop_addr + na; |
| prop_after_size = prop_size + ns; |
| if (prop_after_size > prop_end) { |
| debug("(not enough data: expected >= %d cells, got %d cells)\n", |
| (u32)(prop_after_size - prop), ((u32)(prop_end - prop))); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_TRANSLATE) |
| if (translate) |
| addr = fdt_translate_address(blob, node, prop_addr); |
| else |
| #endif |
| addr = fdtdec_get_number(prop_addr, na); |
| |
| if (sizep) { |
| *sizep = fdtdec_get_number(prop_size, ns); |
| debug("addr=%08llx, size=%llx\n", (unsigned long long)addr, |
| (unsigned long long)*sizep); |
| } else { |
| debug("addr=%08llx\n", (unsigned long long)addr); |
| } |
| |
| return addr; |
| } |
| |
| fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, |
| int node, const char *prop_name, int index, fdt_size_t *sizep, |
| bool translate) |
| { |
| int na, ns; |
| |
| debug("%s: ", __func__); |
| |
| na = fdt_address_cells(blob, parent); |
| if (na < 1) { |
| debug("(bad #address-cells)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| ns = fdt_size_cells(blob, parent); |
| if (ns < 0) { |
| debug("(bad #size-cells)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| debug("na=%d, ns=%d, ", na, ns); |
| |
| return fdtdec_get_addr_size_fixed(blob, node, prop_name, index, na, |
| ns, sizep, translate); |
| } |
| |
| fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, |
| const char *prop_name, int index, fdt_size_t *sizep, |
| bool translate) |
| { |
| int parent; |
| |
| debug("%s: ", __func__); |
| |
| parent = fdt_parent_offset(blob, node); |
| if (parent < 0) { |
| debug("(no parent found)\n"); |
| return FDT_ADDR_T_NONE; |
| } |
| |
| return fdtdec_get_addr_size_auto_parent(blob, parent, node, prop_name, |
| index, sizep, translate); |
| } |
| |
| fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, |
| const char *prop_name, fdt_size_t *sizep) |
| { |
| int ns = sizep ? (sizeof(fdt_size_t) / sizeof(fdt32_t)) : 0; |
| |
| return fdtdec_get_addr_size_fixed(blob, node, prop_name, 0, |
| sizeof(fdt_addr_t) / sizeof(fdt32_t), |
| ns, sizep, false); |
| } |
| |
| fdt_addr_t fdtdec_get_addr(const void *blob, int node, |
| const char *prop_name) |
| { |
| return fdtdec_get_addr_size(blob, node, prop_name, NULL); |
| } |
| |
| #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) |
| int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type, |
| const char *prop_name, struct fdt_pci_addr *addr) |
| { |
| const u32 *cell; |
| int len; |
| int ret = -ENOENT; |
| |
| debug("%s: %s: ", __func__, prop_name); |
| |
| /* |
| * If we follow the pci bus bindings strictly, we should check |
| * the value of the node's parent node's #address-cells and |
| * #size-cells. They need to be 3 and 2 accordingly. However, |
| * for simplicity we skip the check here. |
| */ |
| cell = fdt_getprop(blob, node, prop_name, &len); |
| if (!cell) |
| goto fail; |
| |
| if ((len % FDT_PCI_REG_SIZE) == 0) { |
| int num = len / FDT_PCI_REG_SIZE; |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| debug("pci address #%d: %08lx %08lx %08lx\n", i, |
| (ulong)fdt32_to_cpu(cell[0]), |
| (ulong)fdt32_to_cpu(cell[1]), |
| (ulong)fdt32_to_cpu(cell[2])); |
| if ((fdt32_to_cpu(*cell) & type) == type) { |
| addr->phys_hi = fdt32_to_cpu(cell[0]); |
| addr->phys_mid = fdt32_to_cpu(cell[1]); |
| addr->phys_lo = fdt32_to_cpu(cell[1]); |
| break; |
| } else { |
| cell += (FDT_PCI_ADDR_CELLS + |
| FDT_PCI_SIZE_CELLS); |
| } |
| } |
| |
| if (i == num) { |
| ret = -ENXIO; |
| goto fail; |
| } |
| |
| return 0; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| fail: |
| debug("(not found)\n"); |
| return ret; |
| } |
| |
| int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device) |
| { |
| const char *list, *end; |
| int len; |
| |
| list = fdt_getprop(blob, node, "compatible", &len); |
| if (!list) |
| return -ENOENT; |
| |
| end = list + len; |
| while (list < end) { |
| char *s; |
| |
| len = strlen(list); |
| if (len >= strlen("pciVVVV,DDDD")) { |
| s = strstr(list, "pci"); |
| |
| /* |
| * check if the string is something like pciVVVV,DDDD.RR |
| * or just pciVVVV,DDDD |
| */ |
| if (s && s[7] == ',' && |
| (s[12] == '.' || s[12] == 0)) { |
| s += 3; |
| *vendor = simple_strtol(s, NULL, 16); |
| |
| s += 5; |
| *device = simple_strtol(s, NULL, 16); |
| |
| return 0; |
| } |
| } |
| list += (len + 1); |
| } |
| |
| return -ENOENT; |
| } |
| |
| int fdtdec_get_pci_bar32(struct udevice *dev, struct fdt_pci_addr *addr, |
| u32 *bar) |
| { |
| int barnum; |
| |
| /* extract the bar number from fdt_pci_addr */ |
| barnum = addr->phys_hi & 0xff; |
| if ((barnum < PCI_BASE_ADDRESS_0) || (barnum > PCI_CARDBUS_CIS)) |
| return -EINVAL; |
| |
| barnum = (barnum - PCI_BASE_ADDRESS_0) / 4; |
| *bar = dm_pci_read_bar32(dev, barnum); |
| |
| return 0; |
| } |
| #endif |
| |
| uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name, |
| uint64_t default_val) |
| { |
| const uint64_t *cell64; |
| int length; |
| |
| cell64 = fdt_getprop(blob, node, prop_name, &length); |
| if (!cell64 || length < sizeof(*cell64)) |
| return default_val; |
| |
| return fdt64_to_cpu(*cell64); |
| } |
| |
| int fdtdec_get_is_enabled(const void *blob, int node) |
| { |
| const char *cell; |
| |
| /* |
| * It should say "okay", so only allow that. Some fdts use "ok" but |
| * this is a bug. Please fix your device tree source file. See here |
| * for discussion: |
| * |
| * http://www.mail-archive.com/u-boot@lists.denx.de/msg71598.html |
| */ |
| cell = fdt_getprop(blob, node, "status", NULL); |
| if (cell) |
| return 0 == strcmp(cell, "okay"); |
| return 1; |
| } |
| |
| enum fdt_compat_id fdtdec_lookup(const void *blob, int node) |
| { |
| enum fdt_compat_id id; |
| |
| /* Search our drivers */ |
| for (id = COMPAT_UNKNOWN; id < COMPAT_COUNT; id++) |
| if (0 == fdt_node_check_compatible(blob, node, |
| compat_names[id])) |
| return id; |
| return COMPAT_UNKNOWN; |
| } |
| |
| int fdtdec_next_compatible(const void *blob, int node, |
| enum fdt_compat_id id) |
| { |
| return fdt_node_offset_by_compatible(blob, node, compat_names[id]); |
| } |
| |
| int fdtdec_next_compatible_subnode(const void *blob, int node, |
| enum fdt_compat_id id, int *depthp) |
| { |
| do { |
| node = fdt_next_node(blob, node, depthp); |
| } while (*depthp > 1); |
| |
| /* If this is a direct subnode, and compatible, return it */ |
| if (*depthp == 1 && 0 == fdt_node_check_compatible( |
| blob, node, compat_names[id])) |
| return node; |
| |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| int fdtdec_next_alias(const void *blob, const char *name, |
| enum fdt_compat_id id, int *upto) |
| { |
| #define MAX_STR_LEN 20 |
| char str[MAX_STR_LEN + 20]; |
| int node, err; |
| |
| /* snprintf() is not available */ |
| BUG_ON(strlen(name) >= MAX_STR_LEN); |
| sprintf(str, "%.*s%d", MAX_STR_LEN, name, *upto); |
| node = fdt_path_offset(blob, str); |
| if (node < 0) |
| return node; |
| err = fdt_node_check_compatible(blob, node, compat_names[id]); |
| if (err < 0) |
| return err; |
| if (err) |
| return -FDT_ERR_NOTFOUND; |
| (*upto)++; |
| return node; |
| } |
| |
| int fdtdec_find_aliases_for_id(const void *blob, const char *name, |
| enum fdt_compat_id id, int *node_list, int maxcount) |
| { |
| memset(node_list, '\0', sizeof(*node_list) * maxcount); |
| |
| return fdtdec_add_aliases_for_id(blob, name, id, node_list, maxcount); |
| } |
| |
| /* TODO: Can we tighten this code up a little? */ |
| int fdtdec_add_aliases_for_id(const void *blob, const char *name, |
| enum fdt_compat_id id, int *node_list, int maxcount) |
| { |
| int name_len = strlen(name); |
| int nodes[maxcount]; |
| int num_found = 0; |
| int offset, node; |
| int alias_node; |
| int count; |
| int i, j; |
| |
| /* find the alias node if present */ |
| alias_node = fdt_path_offset(blob, "/aliases"); |
| |
| /* |
| * start with nothing, and we can assume that the root node can't |
| * match |
| */ |
| memset(nodes, '\0', sizeof(nodes)); |
| |
| /* First find all the compatible nodes */ |
| for (node = count = 0; node >= 0 && count < maxcount;) { |
| node = fdtdec_next_compatible(blob, node, id); |
| if (node >= 0) |
| nodes[count++] = node; |
| } |
| if (node >= 0) |
| debug("%s: warning: maxcount exceeded with alias '%s'\n", |
| __func__, name); |
| |
| /* Now find all the aliases */ |
| for (offset = fdt_first_property_offset(blob, alias_node); |
| offset > 0; |
| offset = fdt_next_property_offset(blob, offset)) { |
| const struct fdt_property *prop; |
| const char *path; |
| int number; |
| int found; |
| |
| node = 0; |
| prop = fdt_get_property_by_offset(blob, offset, NULL); |
| path = fdt_string(blob, fdt32_to_cpu(prop->nameoff)); |
| if (prop->len && 0 == strncmp(path, name, name_len)) |
| node = fdt_path_offset(blob, prop->data); |
| if (node <= 0) |
| continue; |
| |
| /* Get the alias number */ |
| number = simple_strtoul(path + name_len, NULL, 10); |
| if (number < 0 || number >= maxcount) { |
| debug("%s: warning: alias '%s' is out of range\n", |
| __func__, path); |
| continue; |
| } |
| |
| /* Make sure the node we found is actually in our list! */ |
| found = -1; |
| for (j = 0; j < count; j++) |
| if (nodes[j] == node) { |
| found = j; |
| break; |
| } |
| |
| if (found == -1) { |
| debug("%s: warning: alias '%s' points to a node " |
| "'%s' that is missing or is not compatible " |
| " with '%s'\n", __func__, path, |
| fdt_get_name(blob, node, NULL), |
| compat_names[id]); |
| continue; |
| } |
| |
| /* |
| * Add this node to our list in the right place, and mark |
| * it as done. |
| */ |
| if (fdtdec_get_is_enabled(blob, node)) { |
| if (node_list[number]) { |
| debug("%s: warning: alias '%s' requires that " |
| "a node be placed in the list in a " |
| "position which is already filled by " |
| "node '%s'\n", __func__, path, |
| fdt_get_name(blob, node, NULL)); |
| continue; |
| } |
| node_list[number] = node; |
| if (number >= num_found) |
| num_found = number + 1; |
| } |
| nodes[found] = 0; |
| } |
| |
| /* Add any nodes not mentioned by an alias */ |
| for (i = j = 0; i < maxcount; i++) { |
| if (!node_list[i]) { |
| for (; j < maxcount; j++) |
| if (nodes[j] && |
| fdtdec_get_is_enabled(blob, nodes[j])) |
| break; |
| |
| /* Have we run out of nodes to add? */ |
| if (j == maxcount) |
| break; |
| |
| BUG_ON(node_list[i]); |
| node_list[i] = nodes[j++]; |
| if (i >= num_found) |
| num_found = i + 1; |
| } |
| } |
| |
| return num_found; |
| } |
| |
| int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, |
| int *seqp) |
| { |
| int base_len = strlen(base); |
| const char *find_name; |
| int find_namelen; |
| int prop_offset; |
| int aliases; |
| |
| find_name = fdt_get_name(blob, offset, &find_namelen); |
| debug("Looking for '%s' at %d, name %s\n", base, offset, find_name); |
| |
| aliases = fdt_path_offset(blob, "/aliases"); |
| for (prop_offset = fdt_first_property_offset(blob, aliases); |
| prop_offset > 0; |
| prop_offset = fdt_next_property_offset(blob, prop_offset)) { |
| const char *prop; |
| const char *name; |
| const char *slash; |
| int len, val; |
| |
| prop = fdt_getprop_by_offset(blob, prop_offset, &name, &len); |
| debug(" - %s, %s\n", name, prop); |
| if (len < find_namelen || *prop != '/' || prop[len - 1] || |
| strncmp(name, base, base_len)) |
| continue; |
| |
| slash = strrchr(prop, '/'); |
| if (strcmp(slash + 1, find_name)) |
| continue; |
| val = trailing_strtol(name); |
| if (val != -1) { |
| *seqp = val; |
| debug("Found seq %d\n", *seqp); |
| return 0; |
| } |
| } |
| |
| debug("Not found\n"); |
| return -ENOENT; |
| } |
| |
| const char *fdtdec_get_chosen_prop(const void *blob, const char *name) |
| { |
| int chosen_node; |
| |
| if (!blob) |
| return NULL; |
| chosen_node = fdt_path_offset(blob, "/chosen"); |
| return fdt_getprop(blob, chosen_node, name, NULL); |
| } |
| |
| int fdtdec_get_chosen_node(const void *blob, const char *name) |
| { |
| const char *prop; |
| |
| prop = fdtdec_get_chosen_prop(blob, name); |
| if (!prop) |
| return -FDT_ERR_NOTFOUND; |
| return fdt_path_offset(blob, prop); |
| } |
| |
| int fdtdec_check_fdt(void) |
| { |
| /* |
| * We must have an FDT, but we cannot panic() yet since the console |
| * is not ready. So for now, just assert(). Boards which need an early |
| * FDT (prior to console ready) will need to make their own |
| * arrangements and do their own checks. |
| */ |
| BUG_ON(fdtdec_prepare_fdt()); |
| return 0; |
| } |
| |
| /* |
| * This function is a little odd in that it accesses global data. At some |
| * point if the architecture board.c files merge this will make more sense. |
| * Even now, it is common code. |
| */ |
| int fdtdec_prepare_fdt(void) |
| { |
| if (!gd->fdt_blob || ((uintptr_t)gd->fdt_blob & 3) || |
| fdt_check_header(gd->fdt_blob)) { |
| #ifdef CONFIG_SPL_BUILD |
| puts("Missing DTB\n"); |
| #else |
| puts("No valid device tree binary found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>\n"); |
| # ifdef DEBUG |
| if (gd->fdt_blob) { |
| printf("fdt_blob=%p\n", gd->fdt_blob); |
| print_buffer((ulong)gd->fdt_blob, gd->fdt_blob, 4, |
| 32, 0); |
| } |
| # endif |
| #endif |
| return -1; |
| } |
| return 0; |
| } |
| |
| int fdtdec_lookup_phandle(const void *blob, int node, const char *prop_name) |
| { |
| const u32 *phandle; |
| int lookup; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| phandle = fdt_getprop(blob, node, prop_name, NULL); |
| if (!phandle) |
| return -FDT_ERR_NOTFOUND; |
| |
| lookup = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*phandle)); |
| return lookup; |
| } |
| |
| /** |
| * Look up a property in a node and check that it has a minimum length. |
| * |
| * @param blob FDT blob |
| * @param node node to examine |
| * @param prop_name name of property to find |
| * @param min_len minimum property length in bytes |
| * @param err 0 if ok, or -FDT_ERR_NOTFOUND if the property is not |
| found, or -FDT_ERR_BADLAYOUT if not enough data |
| * @return pointer to cell, which is only valid if err == 0 |
| */ |
| static const void *get_prop_check_min_len(const void *blob, int node, |
| const char *prop_name, int min_len, int *err) |
| { |
| const void *cell; |
| int len; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| cell = fdt_getprop(blob, node, prop_name, &len); |
| if (!cell) |
| *err = -FDT_ERR_NOTFOUND; |
| else if (len < min_len) |
| *err = -FDT_ERR_BADLAYOUT; |
| else |
| *err = 0; |
| return cell; |
| } |
| |
| int fdtdec_get_int_array(const void *blob, int node, const char *prop_name, |
| u32 *array, int count) |
| { |
| const u32 *cell; |
| int i, err = 0; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| cell = get_prop_check_min_len(blob, node, prop_name, |
| sizeof(u32) * count, &err); |
| if (!err) { |
| for (i = 0; i < count; i++) |
| array[i] = fdt32_to_cpu(cell[i]); |
| } |
| return err; |
| } |
| |
| int fdtdec_get_int_array_count(const void *blob, int node, |
| const char *prop_name, u32 *array, int count) |
| { |
| const u32 *cell; |
| int len, elems; |
| int i; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| cell = fdt_getprop(blob, node, prop_name, &len); |
| if (!cell) |
| return -FDT_ERR_NOTFOUND; |
| elems = len / sizeof(u32); |
| if (count > elems) |
| count = elems; |
| for (i = 0; i < count; i++) |
| array[i] = fdt32_to_cpu(cell[i]); |
| |
| return count; |
| } |
| |
| const u32 *fdtdec_locate_array(const void *blob, int node, |
| const char *prop_name, int count) |
| { |
| const u32 *cell; |
| int err; |
| |
| cell = get_prop_check_min_len(blob, node, prop_name, |
| sizeof(u32) * count, &err); |
| return err ? NULL : cell; |
| } |
| |
| int fdtdec_get_bool(const void *blob, int node, const char *prop_name) |
| { |
| const s32 *cell; |
| int len; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| cell = fdt_getprop(blob, node, prop_name, &len); |
| return cell != NULL; |
| } |
| |
| int fdtdec_parse_phandle_with_args(const void *blob, int src_node, |
| const char *list_name, |
| const char *cells_name, |
| int cell_count, int index, |
| struct fdtdec_phandle_args *out_args) |
| { |
| const __be32 *list, *list_end; |
| int rc = 0, size, cur_index = 0; |
| uint32_t count = 0; |
| int node = -1; |
| int phandle; |
| |
| /* Retrieve the phandle list property */ |
| list = fdt_getprop(blob, src_node, list_name, &size); |
| if (!list) |
| return -ENOENT; |
| list_end = list + size / sizeof(*list); |
| |
| /* Loop over the phandles until all the requested entry is found */ |
| while (list < list_end) { |
| rc = -EINVAL; |
| count = 0; |
| |
| /* |
| * If phandle is 0, then it is an empty entry with no |
| * arguments. Skip forward to the next entry. |
| */ |
| phandle = be32_to_cpup(list++); |
| if (phandle) { |
| /* |
| * Find the provider node and parse the #*-cells |
| * property to determine the argument length. |
| * |
| * This is not needed if the cell count is hard-coded |
| * (i.e. cells_name not set, but cell_count is set), |
| * except when we're going to return the found node |
| * below. |
| */ |
| if (cells_name || cur_index == index) { |
| node = fdt_node_offset_by_phandle(blob, |
| phandle); |
| if (!node) { |
| debug("%s: could not find phandle\n", |
| fdt_get_name(blob, src_node, |
| NULL)); |
| goto err; |
| } |
| } |
| |
| if (cells_name) { |
| count = fdtdec_get_int(blob, node, cells_name, |
| -1); |
| if (count == -1) { |
| debug("%s: could not get %s for %s\n", |
| fdt_get_name(blob, src_node, |
| NULL), |
| cells_name, |
| fdt_get_name(blob, node, |
| NULL)); |
| goto err; |
| } |
| } else { |
| count = cell_count; |
| } |
| |
| /* |
| * Make sure that the arguments actually fit in the |
| * remaining property data length |
| */ |
| if (list + count > list_end) { |
| debug("%s: arguments longer than property\n", |
| fdt_get_name(blob, src_node, NULL)); |
| goto err; |
| } |
| } |
| |
| /* |
| * All of the error cases above bail out of the loop, so at |
| * this point, the parsing is successful. If the requested |
| * index matches, then fill the out_args structure and return, |
| * or return -ENOENT for an empty entry. |
| */ |
| rc = -ENOENT; |
| if (cur_index == index) { |
| if (!phandle) |
| goto err; |
| |
| if (out_args) { |
| int i; |
| |
| if (count > MAX_PHANDLE_ARGS) { |
| debug("%s: too many arguments %d\n", |
| fdt_get_name(blob, src_node, |
| NULL), count); |
| count = MAX_PHANDLE_ARGS; |
| } |
| out_args->node = node; |
| out_args->args_count = count; |
| for (i = 0; i < count; i++) { |
| out_args->args[i] = |
| be32_to_cpup(list++); |
| } |
| } |
| |
| /* Found it! return success */ |
| return 0; |
| } |
| |
| node = -1; |
| list += count; |
| cur_index++; |
| } |
| |
| /* |
| * Result will be one of: |
| * -ENOENT : index is for empty phandle |
| * -EINVAL : parsing error on data |
| * [1..n] : Number of phandle (count mode; when index = -1) |
| */ |
| rc = index < 0 ? cur_index : -ENOENT; |
| err: |
| return rc; |
| } |
| |
| int fdtdec_get_child_count(const void *blob, int node) |
| { |
| int subnode; |
| int num = 0; |
| |
| fdt_for_each_subnode(subnode, blob, node) |
| num++; |
| |
| return num; |
| } |
| |
| int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name, |
| u8 *array, int count) |
| { |
| const u8 *cell; |
| int err; |
| |
| cell = get_prop_check_min_len(blob, node, prop_name, count, &err); |
| if (!err) |
| memcpy(array, cell, count); |
| return err; |
| } |
| |
| const u8 *fdtdec_locate_byte_array(const void *blob, int node, |
| const char *prop_name, int count) |
| { |
| const u8 *cell; |
| int err; |
| |
| cell = get_prop_check_min_len(blob, node, prop_name, count, &err); |
| if (err) |
| return NULL; |
| return cell; |
| } |
| |
| int fdtdec_get_config_int(const void *blob, const char *prop_name, |
| int default_val) |
| { |
| int config_node; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| config_node = fdt_path_offset(blob, "/config"); |
| if (config_node < 0) |
| return default_val; |
| return fdtdec_get_int(blob, config_node, prop_name, default_val); |
| } |
| |
| int fdtdec_get_config_bool(const void *blob, const char *prop_name) |
| { |
| int config_node; |
| const void *prop; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| config_node = fdt_path_offset(blob, "/config"); |
| if (config_node < 0) |
| return 0; |
| prop = fdt_get_property(blob, config_node, prop_name, NULL); |
| |
| return prop != NULL; |
| } |
| |
| char *fdtdec_get_config_string(const void *blob, const char *prop_name) |
| { |
| const char *nodep; |
| int nodeoffset; |
| int len; |
| |
| debug("%s: %s\n", __func__, prop_name); |
| nodeoffset = fdt_path_offset(blob, "/config"); |
| if (nodeoffset < 0) |
| return NULL; |
| |
| nodep = fdt_getprop(blob, nodeoffset, prop_name, &len); |
| if (!nodep) |
| return NULL; |
| |
| return (char *)nodep; |
| } |
| |
| int fdtdec_decode_region(const void *blob, int node, const char *prop_name, |
| fdt_addr_t *basep, fdt_size_t *sizep) |
| { |
| const fdt_addr_t *cell; |
| int len; |
| |
| debug("%s: %s: %s\n", __func__, fdt_get_name(blob, node, NULL), |
| prop_name); |
| cell = fdt_getprop(blob, node, prop_name, &len); |
| if (!cell || (len < sizeof(fdt_addr_t) * 2)) { |
| debug("cell=%p, len=%d\n", cell, len); |
| return -1; |
| } |
| |
| *basep = fdt_addr_to_cpu(*cell); |
| *sizep = fdt_size_to_cpu(cell[1]); |
| debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep, |
| (ulong)*sizep); |
| |
| return 0; |
| } |
| |
| u64 fdtdec_get_number(const fdt32_t *ptr, unsigned int cells) |
| { |
| u64 number = 0; |
| |
| while (cells--) |
| number = (number << 32) | fdt32_to_cpu(*ptr++); |
| |
| return number; |
| } |
| |
| int fdt_get_resource(const void *fdt, int node, const char *property, |
| unsigned int index, struct fdt_resource *res) |
| { |
| const fdt32_t *ptr, *end; |
| int na, ns, len, parent; |
| unsigned int i = 0; |
| |
| parent = fdt_parent_offset(fdt, node); |
| if (parent < 0) |
| return parent; |
| |
| na = fdt_address_cells(fdt, parent); |
| ns = fdt_size_cells(fdt, parent); |
| |
| ptr = fdt_getprop(fdt, node, property, &len); |
| if (!ptr) |
| return len; |
| |
| end = ptr + len / sizeof(*ptr); |
| |
| while (ptr + na + ns <= end) { |
| if (i == index) { |
| res->start = res->end = fdtdec_get_number(ptr, na); |
| res->end += fdtdec_get_number(&ptr[na], ns) - 1; |
| return 0; |
| } |
| |
| ptr += na + ns; |
| i++; |
| } |
| |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| int fdt_get_named_resource(const void *fdt, int node, const char *property, |
| const char *prop_names, const char *name, |
| struct fdt_resource *res) |
| { |
| int index; |
| |
| index = fdt_stringlist_search(fdt, node, prop_names, name); |
| if (index < 0) |
| return index; |
| |
| return fdt_get_resource(fdt, node, property, index, res); |
| } |
| |
| int fdtdec_decode_memory_region(const void *blob, int config_node, |
| const char *mem_type, const char *suffix, |
| fdt_addr_t *basep, fdt_size_t *sizep) |
| { |
| char prop_name[50]; |
| const char *mem; |
| fdt_size_t size, offset_size; |
| fdt_addr_t base, offset; |
| int node; |
| |
| if (config_node == -1) { |
| config_node = fdt_path_offset(blob, "/config"); |
| if (config_node < 0) { |
| debug("%s: Cannot find /config node\n", __func__); |
| return -ENOENT; |
| } |
| } |
| if (!suffix) |
| suffix = ""; |
| |
| snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type, |
| suffix); |
| mem = fdt_getprop(blob, config_node, prop_name, NULL); |
| if (!mem) { |
| debug("%s: No memory type for '%s', using /memory\n", __func__, |
| prop_name); |
| mem = "/memory"; |
| } |
| |
| node = fdt_path_offset(blob, mem); |
| if (node < 0) { |
| debug("%s: Failed to find node '%s': %s\n", __func__, mem, |
| fdt_strerror(node)); |
| return -ENOENT; |
| } |
| |
| /* |
| * Not strictly correct - the memory may have multiple banks. We just |
| * use the first |
| */ |
| if (fdtdec_decode_region(blob, node, "reg", &base, &size)) { |
| debug("%s: Failed to decode memory region %s\n", __func__, |
| mem); |
| return -EINVAL; |
| } |
| |
| snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type, |
| suffix); |
| if (fdtdec_decode_region(blob, config_node, prop_name, &offset, |
| &offset_size)) { |
| debug("%s: Failed to decode memory region '%s'\n", __func__, |
| prop_name); |
| return -EINVAL; |
| } |
| |
| *basep = base + offset; |
| *sizep = offset_size; |
| |
| return 0; |
| } |
| |
| static int decode_timing_property(const void *blob, int node, const char *name, |
| struct timing_entry *result) |
| { |
| int length, ret = 0; |
| const u32 *prop; |
| |
| prop = fdt_getprop(blob, node, name, &length); |
| if (!prop) { |
| debug("%s: could not find property %s\n", |
| fdt_get_name(blob, node, NULL), name); |
| return length; |
| } |
| |
| if (length == sizeof(u32)) { |
| result->typ = fdtdec_get_int(blob, node, name, 0); |
| result->min = result->typ; |
| result->max = result->typ; |
| } else { |
| ret = fdtdec_get_int_array(blob, node, name, &result->min, 3); |
| } |
| |
| return ret; |
| } |
| |
| int fdtdec_decode_display_timing(const void *blob, int parent, int index, |
| struct display_timing *dt) |
| { |
| int i, node, timings_node; |
| u32 val = 0; |
| int ret = 0; |
| |
| timings_node = fdt_subnode_offset(blob, parent, "display-timings"); |
| if (timings_node < 0) |
| return timings_node; |
| |
| for (i = 0, node = fdt_first_subnode(blob, timings_node); |
| node > 0 && i != index; |
| node = fdt_next_subnode(blob, node)) |
| i++; |
| |
| if (node < 0) |
| return node; |
| |
| memset(dt, 0, sizeof(*dt)); |
| |
| ret |= decode_timing_property(blob, node, "hback-porch", |
| &dt->hback_porch); |
| ret |= decode_timing_property(blob, node, "hfront-porch", |
| &dt->hfront_porch); |
| ret |= decode_timing_property(blob, node, "hactive", &dt->hactive); |
| ret |= decode_timing_property(blob, node, "hsync-len", &dt->hsync_len); |
| ret |= decode_timing_property(blob, node, "vback-porch", |
| &dt->vback_porch); |
| ret |= decode_timing_property(blob, node, "vfront-porch", |
| &dt->vfront_porch); |
| ret |= decode_timing_property(blob, node, "vactive", &dt->vactive); |
| ret |= decode_timing_property(blob, node, "vsync-len", &dt->vsync_len); |
| ret |= decode_timing_property(blob, node, "clock-frequency", |
| &dt->pixelclock); |
| |
| dt->flags = 0; |
| val = fdtdec_get_int(blob, node, "vsync-active", -1); |
| if (val != -1) { |
| dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH : |
| DISPLAY_FLAGS_VSYNC_LOW; |
| } |
| val = fdtdec_get_int(blob, node, "hsync-active", -1); |
| if (val != -1) { |
| dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH : |
| DISPLAY_FLAGS_HSYNC_LOW; |
| } |
| val = fdtdec_get_int(blob, node, "de-active", -1); |
| if (val != -1) { |
| dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH : |
| DISPLAY_FLAGS_DE_LOW; |
| } |
| val = fdtdec_get_int(blob, node, "pixelclk-active", -1); |
| if (val != -1) { |
| dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE : |
| DISPLAY_FLAGS_PIXDATA_NEGEDGE; |
| } |
| |
| if (fdtdec_get_bool(blob, node, "interlaced")) |
| dt->flags |= DISPLAY_FLAGS_INTERLACED; |
| if (fdtdec_get_bool(blob, node, "doublescan")) |
| dt->flags |= DISPLAY_FLAGS_DOUBLESCAN; |
| if (fdtdec_get_bool(blob, node, "doubleclk")) |
| dt->flags |= DISPLAY_FLAGS_DOUBLECLK; |
| |
| return ret; |
| } |
| |
| int fdtdec_setup_memory_size(void) |
| { |
| int ret, mem; |
| struct fdt_resource res; |
| |
| mem = fdt_path_offset(gd->fdt_blob, "/memory"); |
| if (mem < 0) { |
| debug("%s: Missing /memory node\n", __func__); |
| return -EINVAL; |
| } |
| |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res); |
| if (ret != 0) { |
| debug("%s: Unable to decode first memory bank\n", __func__); |
| return -EINVAL; |
| } |
| |
| gd->ram_size = (phys_size_t)(res.end - res.start + 1); |
| debug("%s: Initial DRAM size %llx\n", __func__, |
| (unsigned long long)gd->ram_size); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_NR_DRAM_BANKS) |
| int fdtdec_setup_memory_banksize(void) |
| { |
| int bank, ret, mem, reg = 0; |
| struct fdt_resource res; |
| |
| mem = fdt_node_offset_by_prop_value(gd->fdt_blob, -1, "device_type", |
| "memory", 7); |
| if (mem < 0) { |
| debug("%s: Missing /memory node\n", __func__); |
| return -EINVAL; |
| } |
| |
| for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res); |
| if (ret == -FDT_ERR_NOTFOUND) { |
| reg = 0; |
| mem = fdt_node_offset_by_prop_value(gd->fdt_blob, mem, |
| "device_type", |
| "memory", 7); |
| if (mem == -FDT_ERR_NOTFOUND) |
| break; |
| |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res); |
| if (ret == -FDT_ERR_NOTFOUND) |
| break; |
| } |
| if (ret != 0) { |
| return -EINVAL; |
| } |
| |
| gd->bd->bi_dram[bank].start = (phys_addr_t)res.start; |
| gd->bd->bi_dram[bank].size = |
| (phys_size_t)(res.end - res.start + 1); |
| |
| debug("%s: DRAM Bank #%d: start = 0x%llx, size = 0x%llx\n", |
| __func__, bank, |
| (unsigned long long)gd->bd->bi_dram[bank].start, |
| (unsigned long long)gd->bd->bi_dram[bank].size); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\ |
| CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO) |
| static int uncompress_blob(const void *src, ulong sz_src, void **dstp) |
| { |
| size_t sz_out = CONFIG_SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ; |
| ulong sz_in = sz_src; |
| void *dst; |
| int rc; |
| |
| if (CONFIG_IS_ENABLED(GZIP)) |
| if (gzip_parse_header(src, sz_in) < 0) |
| return -1; |
| if (CONFIG_IS_ENABLED(LZO)) |
| if (!lzop_is_valid_header(src)) |
| return -EBADMSG; |
| |
| if (CONFIG_IS_ENABLED(MULTI_DTB_FIT_DYN_ALLOC)) { |
| dst = malloc(sz_out); |
| if (!dst) { |
| puts("uncompress_blob: Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| } else { |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA) |
| dst = (void *)CONFIG_VAL(MULTI_DTB_FIT_USER_DEF_ADDR); |
| # else |
| return -ENOTSUPP; |
| # endif |
| } |
| |
| if (CONFIG_IS_ENABLED(GZIP)) |
| rc = gunzip(dst, sz_out, (u8 *)src, &sz_in); |
| else if (CONFIG_IS_ENABLED(LZO)) |
| rc = lzop_decompress(src, sz_in, dst, &sz_out); |
| |
| if (rc < 0) { |
| /* not a valid compressed blob */ |
| puts("uncompress_blob: Unable to uncompress\n"); |
| if (CONFIG_IS_ENABLED(MULTI_DTB_FIT_DYN_ALLOC)) |
| free(dst); |
| return -EBADMSG; |
| } |
| *dstp = dst; |
| return 0; |
| } |
| # else |
| static int uncompress_blob(const void *src, ulong sz_src, void **dstp) |
| { |
| return -ENOTSUPP; |
| } |
| # endif |
| #endif |
| |
| int fdtdec_setup(void) |
| { |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT) |
| void *fdt_blob; |
| # endif |
| # ifdef CONFIG_OF_EMBED |
| /* Get a pointer to the FDT */ |
| # ifdef CONFIG_SPL_BUILD |
| gd->fdt_blob = __dtb_dt_spl_begin; |
| # else |
| gd->fdt_blob = __dtb_dt_begin; |
| # endif |
| # elif defined CONFIG_OF_SEPARATE |
| # ifdef CONFIG_SPL_BUILD |
| /* FDT is at end of BSS unless it is in a different memory region */ |
| if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) |
| gd->fdt_blob = (ulong *)&_image_binary_end; |
| else |
| gd->fdt_blob = (ulong *)&__bss_end; |
| # else |
| /* FDT is at end of image */ |
| gd->fdt_blob = (ulong *)&_end; |
| # endif |
| # elif defined(CONFIG_OF_BOARD) |
| /* Allow the board to override the fdt address. */ |
| gd->fdt_blob = board_fdt_blob_setup(); |
| # elif defined(CONFIG_OF_HOSTFILE) |
| if (sandbox_read_fdt_from_file()) { |
| puts("Failed to read control FDT\n"); |
| return -1; |
| } |
| # endif |
| # ifndef CONFIG_SPL_BUILD |
| /* Allow the early environment to override the fdt address */ |
| gd->fdt_blob = (void *)env_get_ulong("fdtcontroladdr", 16, |
| (uintptr_t)gd->fdt_blob); |
| # endif |
| |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT) |
| /* |
| * Try and uncompress the blob. |
| * Unfortunately there is no way to know how big the input blob really |
| * is. So let us set the maximum input size arbitrarily high. 16MB |
| * ought to be more than enough for packed DTBs. |
| */ |
| if (uncompress_blob(gd->fdt_blob, 0x1000000, &fdt_blob) == 0) |
| gd->fdt_blob = fdt_blob; |
| |
| /* |
| * Check if blob is a FIT images containings DTBs. |
| * If so, pick the most relevant |
| */ |
| fdt_blob = locate_dtb_in_fit(gd->fdt_blob); |
| if (fdt_blob) |
| gd->fdt_blob = fdt_blob; |
| # endif |
| #endif |
| |
| return fdtdec_prepare_fdt(); |
| } |
| |
| #endif /* !USE_HOSTCC */ |