| /* |
| * From Coreboot northbridge/intel/sandybridge/northbridge.c |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * Copyright (C) 2011 The Chromium Authors |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <asm/msr.h> |
| #include <asm/acpi.h> |
| #include <asm/cpu.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| #include <asm/processor.h> |
| #include <asm/arch/pch.h> |
| #include <asm/arch/model_206ax.h> |
| #include <asm/arch/sandybridge.h> |
| |
| static int bridge_revision_id = -1; |
| |
| int bridge_silicon_revision(void) |
| { |
| if (bridge_revision_id < 0) { |
| struct cpuid_result result; |
| uint8_t stepping, bridge_id; |
| pci_dev_t dev; |
| |
| result = cpuid(1); |
| stepping = result.eax & 0xf; |
| dev = PCI_BDF(0, 0, 0); |
| bridge_id = x86_pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0; |
| bridge_revision_id = bridge_id | stepping; |
| } |
| |
| return bridge_revision_id; |
| } |
| |
| /* |
| * Reserve everything between A segment and 1MB: |
| * |
| * 0xa0000 - 0xbffff: legacy VGA |
| * 0xc0000 - 0xcffff: VGA OPROM (needed by kernel) |
| * 0xe0000 - 0xfffff: SeaBIOS, if used, otherwise DMI |
| */ |
| static const int legacy_hole_base_k = 0xa0000 / 1024; |
| static const int legacy_hole_size_k = 384; |
| |
| static int get_pcie_bar(u32 *base, u32 *len) |
| { |
| pci_dev_t dev = PCI_BDF(0, 0, 0); |
| u32 pciexbar_reg; |
| |
| *base = 0; |
| *len = 0; |
| |
| pciexbar_reg = x86_pci_read_config32(dev, PCIEXBAR); |
| |
| if (!(pciexbar_reg & (1 << 0))) |
| return 0; |
| |
| switch ((pciexbar_reg >> 1) & 3) { |
| case 0: /* 256MB */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28)); |
| *len = 256 * 1024 * 1024; |
| return 1; |
| case 1: /* 128M */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28) | (1 << 27)); |
| *len = 128 * 1024 * 1024; |
| return 1; |
| case 2: /* 64M */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28) | (1 << 27) | (1 << 26)); |
| *len = 64 * 1024 * 1024; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void add_fixed_resources(pci_dev_t dev, int index) |
| { |
| u32 pcie_config_base, pcie_config_size; |
| |
| if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) { |
| debug("Adding PCIe config bar base=0x%08x size=0x%x\n", |
| pcie_config_base, pcie_config_size); |
| } |
| } |
| |
| static void northbridge_dmi_init(pci_dev_t dev) |
| { |
| /* Clear error status bits */ |
| writel(0xffffffff, DMIBAR_REG(0x1c4)); |
| writel(0xffffffff, DMIBAR_REG(0x1d0)); |
| |
| /* Steps prior to DMI ASPM */ |
| if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) { |
| clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20), |
| 1 << 21); |
| } |
| |
| setbits_le32(DMIBAR_REG(0x238), 1 << 29); |
| |
| if (bridge_silicon_revision() >= SNB_STEP_D0) { |
| setbits_le32(DMIBAR_REG(0x1f8), 1 << 16); |
| } else if (bridge_silicon_revision() >= SNB_STEP_D1) { |
| clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16); |
| setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23)); |
| } |
| |
| /* Enable ASPM on SNB link, should happen before PCH link */ |
| if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) |
| setbits_le32(DMIBAR_REG(0xd04), 1 << 4); |
| |
| setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0)); |
| } |
| |
| void northbridge_init(pci_dev_t dev) |
| { |
| u32 bridge_type; |
| |
| add_fixed_resources(dev, 6); |
| northbridge_dmi_init(dev); |
| |
| bridge_type = readl(MCHBAR_REG(0x5f10)); |
| bridge_type &= ~0xff; |
| |
| if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { |
| /* Enable Power Aware Interrupt Routing - fixed priority */ |
| clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4); |
| |
| /* 30h for IvyBridge */ |
| bridge_type |= 0x30; |
| } else { |
| /* 20h for Sandybridge */ |
| bridge_type |= 0x20; |
| } |
| writel(bridge_type, MCHBAR_REG(0x5f10)); |
| |
| /* |
| * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU |
| * that BIOS has initialized memory and power management |
| */ |
| setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 1); |
| debug("Set BIOS_RESET_CPL\n"); |
| |
| /* Configure turbo power limits 1ms after reset complete bit */ |
| mdelay(1); |
| set_power_limits(28); |
| |
| /* |
| * CPUs with configurable TDP also need power limits set |
| * in MCHBAR. Use same values from MSR_PKG_POWER_LIMIT. |
| */ |
| if (cpu_config_tdp_levels()) { |
| msr_t msr = msr_read(MSR_PKG_POWER_LIMIT); |
| |
| writel(msr.lo, MCHBAR_REG(0x59A0)); |
| writel(msr.hi, MCHBAR_REG(0x59A4)); |
| } |
| |
| /* Set here before graphics PM init */ |
| writel(0x00100001, MCHBAR_REG(0x5500)); |
| } |
| |
| void northbridge_enable(pci_dev_t dev) |
| { |
| } |