Initial revision
diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php
new file mode 100644
index 0000000..0f6e0d7
--- /dev/null
+++ b/tools/bddb/donew.php
@@ -0,0 +1,228 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+ // (C) Copyright 2001
+ // Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ // CSIRO Manufacturing Science and Technology, Preston Lab
+
+ // doedit page (hymod_bddb / boards)
+
+ require("defs.php");
+
+ pg_head("$bddb_label - Board Registration Results");
+
+ if (($serno=intval($serno)) != 0)
+ die("serial number must not be set ($serno) when Creating!");
+
+ $query="update boards set";
+
+ list($y, $m, $d) = split("-", $date);
+ if (!checkdate($m, $d, $y) || $y < 1999)
+ die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
+ $query.=" date='$date'";
+
+ if ($batch != '') {
+ if (strlen($batch) > 32)
+ die("batch field too long (>32)");
+ $query.=", batch='$batch'";
+ }
+
+ if (!in_array($type, $type_vals))
+ die("Invalid type ($type) specified");
+ $query.=", type='$type'";
+
+ if (($rev = intval($rev)) <= 0 || $rev > 255)
+ die("Revision number is invalid ($rev)");
+ $query.=sprintf(", rev=%d", $rev);
+
+ $query.=gather_enum_multi_query("sdram", 4);
+
+ $query.=gather_enum_multi_query("flash", 4);
+
+ $query.=gather_enum_multi_query("zbt", 16);
+
+ $query.=gather_enum_multi_query("xlxtyp", 4);
+ $nxlx = count_enum_multi("xlxtyp", 4);
+
+ $query.=gather_enum_multi_query("xlxspd", 4);
+ if (count_enum_multi("xlxspd", 4) != $nxlx)
+ die("number of xilinx speeds not same as number of types");
+
+ $query.=gather_enum_multi_query("xlxtmp", 4);
+ if (count_enum_multi("xlxtmp", 4) != $nxlx)
+ die("number of xilinx temps. not same as number of types");
+
+ $query.=gather_enum_multi_query("xlxgrd", 4);
+ if (count_enum_multi("xlxgrd", 4) != $nxlx)
+ die("number of xilinx grades not same as number of types");
+
+ if ($cputyp == '') {
+ if ($cpuspd != '')
+ die("can't specify cpu speed if there is no cpu");
+ if ($cpmspd != '')
+ die("can't specify cpm speed if there is no cpu");
+ if ($busspd != '')
+ die("can't specify bus speed if there is no cpu");
+ }
+ else {
+ $query.=", cputyp='$cputyp'";
+ if ($cpuspd == '')
+ die("must specify cpu speed if cpu type is defined");
+ $query.=", cpuspd='$cpuspd'";
+ if ($cpmspd == '')
+ die("must specify cpm speed if cpu type is defined");
+ $query.=", cpmspd='$cpmspd'";
+ if ($busspd == '')
+ die("must specify bus speed if cpu type is defined");
+ $query.=", busspd='$busspd'";
+ }
+
+ if (($hschin = intval($hschin)) < 0 || $hschin > 4)
+ die("Invalid number of hs input chans ($hschin)");
+ if (($hschout = intval($hschout)) < 0 || $hschout > 4)
+ die("Invalid number of hs output chans ($hschout)");
+ if ($hstype == '') {
+ if ($hschin != 0)
+ die("number of high-speed input channels must be zero"
+ . " if high-speed chip is not present");
+ if ($hschout != 0)
+ die("number of high-speed output channels must be zero"
+ . " if high-speed chip is not present");
+ }
+ else
+ $query.=", hstype='$hstype'";
+ $query.=", hschin='$hschin'";
+ $query.=", hschout='$hschout'";
+
+ // echo "final query = '$query'<br>\n";
+
+ $quant = intval($quant);
+ if ($quant <= 0) $quant = 1;
+
+ $sernos = array();
+ if ($geneths)
+ $ethaddrs = array();
+
+ $sqlerr = '';
+
+ while ($quant-- > 0) {
+
+ mysql_query("insert into boards (serno) values (null)");
+ if (mysql_errno()) {
+ $sqlerr = mysql_error();
+ break;
+ }
+
+ $serno = mysql_insert_id();
+ if (!$serno) {
+ $sqlerr = "couldn't allocate new serial number";
+ break;
+ }
+
+ mysql_query($query . " where serno=$serno");
+ if (mysql_errno()) {
+ $sqlerr = mysql_error();
+ break;
+ }
+
+ array_push($sernos, $serno);
+
+ if ($geneths) {
+
+ $ethaddr = gen_eth_addr($serno);
+
+ mysql_query("update boards set ethaddr='$ethaddr'" .
+ " where serno=$serno");
+ if (mysql_errno()) {
+ $sqlerr = mysql_error();
+
+ array_push($ethaddrs,
+ "<font color=#ff0000><b>" .
+ "db save fail" .
+ "</b></font>");
+ break;
+ }
+
+ array_push($ethaddrs, $ethaddr);
+ }
+ }
+
+ $nsernos = count($sernos);
+
+ if ($nsernos > 0) {
+
+ write_eeprom_cfg_file();
+
+ echo "<font size=+2>\n";
+ echo "\t<p>\n";
+ echo "\t\tThe following board serial numbers were"
+ . " successfully allocated";
+ if ($numerrs > 0)
+ echo " (but with $numerrs cfg file error" .
+ ($numerrs > 1 ? "s" : "") . ")";
+ echo ":\n";
+ echo "\t</p>\n";
+
+ echo "</font>\n";
+
+ echo "<table align=center width=\"100%\">\n";
+ echo "<tr>\n";
+ echo "\t<th>Serial Number</th>\n";
+ if ($numerrs > 0)
+ echo "\t<th>Cfg File Errs</th>\n";
+ if ($geneths)
+ echo "\t<th>Ethernet Address</th>\n";
+ echo "</tr>\n";
+
+ for ($i = 0; $i < $nsernos; $i++) {
+
+ $serno = sprintf("%010d", $sernos[$i]);
+
+ echo "<tr>\n";
+
+ echo "\t<td align=center><font size=+2>" .
+ "<b>$serno</b></font></td>\n";
+
+ if ($numerrs > 0) {
+ if (($errstr = $cfgerrs[$i]) == '')
+ $errstr = ' ';
+ echo "\t<td align=center>" .
+ "<font size=+2 color=#ff0000><b>" .
+ $errstr .
+ "</b></font></td>\n";
+ }
+
+ if ($geneths) {
+ echo "\t<td align=center>" .
+ "<font size=+2 color=#00ff00><b>" .
+ $ethaddrs[$i] .
+ "</b></font></td>\n";
+ }
+
+ echo "</tr>\n";
+ }
+
+ echo "</table>\n";
+ }
+
+ if ($sqlerr != '') {
+ echo "\t<font size=+4>\n";
+ echo "\t\t<p>\n";
+ echo "\t\t\tThe following SQL error was encountered:\n";
+ echo "\t\t</p>\n";
+ echo "\t\t<center>\n";
+ printf("\t\t\t<b>%s</b>\n", $sqlerr);
+ echo "\t\t</center>\n";
+ echo "\t</font>\n";
+ }
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+ <td align=center><a href="browse.php">Go to Browse</a></td>
+ <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+ pg_foot();
+?>