diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php
new file mode 100644
index 0000000..0f6e0d7
--- /dev/null
+++ b/tools/bddb/donew.php
@@ -0,0 +1,228 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Board Registration Results");
+
+	if (($serno=intval($serno)) != 0)
+		die("serial number must not be set ($serno) when Creating!");
+
+	$query="update boards set";
+
+	list($y, $m, $d) = split("-", $date);
+	if (!checkdate($m, $d, $y) || $y < 1999)
+		die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
+	$query.=" date='$date'";
+
+	if ($batch != '') {
+		if (strlen($batch) > 32)
+			die("batch field too long (>32)");
+		$query.=", batch='$batch'";
+	}
+
+	if (!in_array($type, $type_vals))
+		die("Invalid type ($type) specified");
+	$query.=", type='$type'";
+
+	if (($rev = intval($rev)) <= 0 || $rev > 255)
+		die("Revision number is invalid ($rev)");
+	$query.=sprintf(", rev=%d", $rev);
+
+	$query.=gather_enum_multi_query("sdram", 4);
+
+	$query.=gather_enum_multi_query("flash", 4);
+
+	$query.=gather_enum_multi_query("zbt", 16);
+
+	$query.=gather_enum_multi_query("xlxtyp", 4);
+	$nxlx = count_enum_multi("xlxtyp", 4);
+
+	$query.=gather_enum_multi_query("xlxspd", 4);
+	if (count_enum_multi("xlxspd", 4) != $nxlx)
+		die("number of xilinx speeds not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxtmp", 4);
+	if (count_enum_multi("xlxtmp", 4) != $nxlx)
+		die("number of xilinx temps. not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxgrd", 4);
+	if (count_enum_multi("xlxgrd", 4) != $nxlx)
+		die("number of xilinx grades not same as number of types");
+
+	if ($cputyp == '') {
+		if ($cpuspd != '')
+			die("can't specify cpu speed if there is no cpu");
+		if ($cpmspd != '')
+			die("can't specify cpm speed if there is no cpu");
+		if ($busspd != '')
+			die("can't specify bus speed if there is no cpu");
+	}
+	else {
+		$query.=", cputyp='$cputyp'";
+		if ($cpuspd == '')
+			die("must specify cpu speed if cpu type is defined");
+		$query.=", cpuspd='$cpuspd'";
+		if ($cpmspd == '')
+			die("must specify cpm speed if cpu type is defined");
+		$query.=", cpmspd='$cpmspd'";
+		if ($busspd == '')
+			die("must specify bus speed if cpu type is defined");
+		$query.=", busspd='$busspd'";
+	}
+
+	if (($hschin = intval($hschin)) < 0 || $hschin > 4)
+		die("Invalid number of hs input chans ($hschin)");
+	if (($hschout = intval($hschout)) < 0 || $hschout > 4)
+		die("Invalid number of hs output chans ($hschout)");
+	if ($hstype == '') {
+		if ($hschin != 0)
+			die("number of high-speed input channels must be zero"
+				. " if high-speed chip is not present");
+		if ($hschout != 0)
+			die("number of high-speed output channels must be zero"
+				. " if high-speed chip is not present");
+	}
+	else
+		$query.=", hstype='$hstype'";
+	$query.=", hschin='$hschin'";
+	$query.=", hschout='$hschout'";
+
+	// echo "final query = '$query'<br>\n";
+
+	$quant = intval($quant);
+	if ($quant <= 0) $quant = 1;
+
+	$sernos = array();
+	if ($geneths)
+		$ethaddrs = array();
+
+	$sqlerr = '';
+
+	while ($quant-- > 0) {
+
+		mysql_query("insert into boards (serno) values (null)");
+		if (mysql_errno()) {
+			$sqlerr = mysql_error();
+			break;
+		}
+
+		$serno = mysql_insert_id();
+		if (!$serno) {
+			$sqlerr = "couldn't allocate new serial number";
+			break;
+		}
+
+		mysql_query($query . " where serno=$serno");
+		if (mysql_errno()) {
+			$sqlerr = mysql_error();
+			break;
+		}
+
+		array_push($sernos, $serno);
+
+		if ($geneths) {
+
+			$ethaddr = gen_eth_addr($serno);
+
+			mysql_query("update boards set ethaddr='$ethaddr'" .
+			    " where serno=$serno");
+			if (mysql_errno()) {
+				$sqlerr = mysql_error();
+
+				array_push($ethaddrs,
+					"<font color=#ff0000><b>" .
+					"db save fail" .
+					"</b></font>");
+				break;
+			}
+
+			array_push($ethaddrs, $ethaddr);
+		}
+	}
+
+	$nsernos = count($sernos);
+
+	if ($nsernos > 0) {
+
+		write_eeprom_cfg_file();
+
+		echo "<font size=+2>\n";
+		echo "\t<p>\n";
+		echo "\t\tThe following board serial numbers were"
+			. " successfully allocated";
+		if ($numerrs > 0)
+			echo " (but with $numerrs cfg file error" .
+				($numerrs > 1 ? "s" : "") . ")";
+		echo ":\n";
+		echo "\t</p>\n";
+
+		echo "</font>\n";
+
+		echo "<table align=center width=\"100%\">\n";
+		echo "<tr>\n";
+		echo "\t<th>Serial Number</th>\n";
+		if ($numerrs > 0)
+			echo "\t<th>Cfg File Errs</th>\n";
+		if ($geneths)
+			echo "\t<th>Ethernet Address</th>\n";
+		echo "</tr>\n";
+
+		for ($i = 0; $i < $nsernos; $i++) {
+
+			$serno = sprintf("%010d", $sernos[$i]);
+
+			echo "<tr>\n";
+
+			echo "\t<td align=center><font size=+2>" .
+				"<b>$serno</b></font></td>\n";
+
+			if ($numerrs > 0) {
+				if (($errstr = $cfgerrs[$i]) == '')
+					$errstr = '&nbsp;';
+				echo "\t<td align=center>" .
+					"<font size=+2 color=#ff0000><b>" .
+					$errstr .
+					"</b></font></td>\n";
+			}
+
+			if ($geneths) {
+				echo "\t<td align=center>" .
+					"<font size=+2 color=#00ff00><b>" .
+					$ethaddrs[$i] .
+					"</b></font></td>\n";
+			}
+
+			echo "</tr>\n";
+		}
+
+		echo "</table>\n";
+	}
+
+	if ($sqlerr != '') {
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following SQL error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $sqlerr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center><a href="browse.php">Go to Browse</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>