blob: 3e4044593c87f011f3d221e6298861c269aec8e5 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
#ifndef __ASSEMBLY__
#include <asm/processor.h>
#include <asm/mrccache.h>
enum pei_boot_mode_t {
PEI_BOOT_NONE = 0,
PEI_BOOT_SOFT_RESET,
PEI_BOOT_RESUME,
};
struct dimm_info {
uint32_t dimm_size;
uint16_t ddr_type;
uint16_t ddr_frequency;
uint8_t rank_per_dimm;
uint8_t channel_num;
uint8_t dimm_num;
uint8_t bank_locator;
/* The 5th byte is '\0' for the end of string */
uint8_t serial[5];
/* The 19th byte is '\0' for the end of string */
uint8_t module_part_number[19];
uint16_t mod_id;
uint8_t mod_type;
uint8_t bus_width;
} __packed;
struct pei_memory_info {
uint8_t dimm_cnt;
/* Maximum num of dimm is 8 */
struct dimm_info dimm[8];
} __packed;
struct memory_area {
uint64_t start;
uint64_t size;
};
struct memory_info {
int num_areas;
uint64_t total_memory;
uint64_t total_32bit_memory;
struct memory_area area[CONFIG_NR_DRAM_BANKS];
};
#define MAX_MTRR_REQUESTS 8
/**
* A request for a memory region to be set up in a particular way. These
* requests are processed before board_init_r() is called. They are generally
* optional and can be ignored with some performance impact.
*/
struct mtrr_request {
int type; /* MTRR_TYPE_... */
uint64_t start;
uint64_t size;
};
/**
* struct mrc_output - holds the MRC data
*
* @buf: MRC training data to save for the next boot. This is set to point to
* the raw data after SDRAM init is complete. Then mrccache_setup()
* turns it into a proper cache record with a checksum
* @len: Length of @buf
* @cache: Resulting cache record
*/
struct mrc_output {
char *buf;
uint len;
struct mrc_data_container *cache;
};
/* Architecture-specific global data */
struct arch_global_data {
u64 gdt[X86_GDT_NUM_ENTRIES] __aligned(16);
struct global_data *gd_addr; /* Location of Global Data */
uint8_t x86; /* CPU family */
uint8_t x86_vendor; /* CPU vendor */
uint8_t x86_model;
uint8_t x86_mask;
uint32_t x86_device;
uint64_t tsc_base; /* Initial value returned by rdtsc() */
bool tsc_inited; /* true if tsc is ready for use */
unsigned long clock_rate; /* Clock rate of timer in Hz */
void *new_fdt; /* Relocated FDT */
uint32_t bist; /* Built-in self test value */
enum pei_boot_mode_t pei_boot_mode;
const struct pch_gpio_map *gpio_map; /* board GPIO map */
struct memory_info meminfo; /* Memory information */
struct pei_memory_info pei_meminfo; /* PEI memory information */
#ifdef CONFIG_USE_HOB
void *hob_list; /* FSP HOB list */
#endif
struct mtrr_request mtrr_req[MAX_MTRR_REQUESTS];
int mtrr_req_count;
int has_mtrr;
/* MRC training data */
struct mrc_output mrc[MRC_TYPE_COUNT];
ulong table; /* Table pointer from previous loader */
int turbo_state; /* Current turbo state */
struct irq_routing_table *pirq_routing_table;
int dw_i2c_num_cards; /* Used by designware i2c driver */
#ifdef CONFIG_SEABIOS
u32 high_table_ptr;
u32 high_table_limit;
#endif
int prev_sleep_state; /* Previous sleep state ACPI_S0/1../5 */
ulong backup_mem; /* Backup memory address for S3 */
#ifdef CONFIG_FSP_VERSION2
struct fsp_header *fsp_s_hdr; /* Pointer to FSP-S header */
#endif
void *itss_priv; /* Private ITSS data pointer */
ulong acpi_start; /* Start address of ACPI tables */
ulong coreboot_table; /* Address of coreboot table */
};
#endif
#include <asm-generic/global_data.h>
#ifndef __ASSEMBLY__
# if defined(CONFIG_EFI_APP) || CONFIG_IS_ENABLED(X86_64)
/* TODO(sjg@chromium.org): Consider using a fixed register for gd on x86_64 */
#define gd global_data_ptr
#define DECLARE_GLOBAL_DATA_PTR extern struct global_data *global_data_ptr
# else
static inline __attribute__((no_instrument_function)) gd_t *get_fs_gd_ptr(void)
{
gd_t *gd_ptr;
#if CONFIG_IS_ENABLED(X86_64)
asm volatile("fs mov 0, %0\n" : "=r" (gd_ptr));
#else
asm volatile("fs movl 0, %0\n" : "=r" (gd_ptr));
#endif
return gd_ptr;
}
#define gd get_fs_gd_ptr()
#define DECLARE_GLOBAL_DATA_PTR
# endif
#endif
#endif /* __ASM_GBL_DATA_H */