arch/x86/Kconfig

menu "x86 architecture"
	depends on X86

config SYS_ARCH
	default "x86"

config USE_PRIVATE_LIBGCC
	default y

choice
	prompt "Target select"

config TARGET_COREBOOT
	bool "Support coreboot"
	help
	  This target is used for running U-Boot on top of Coreboot. In
	  this case Coreboot does the early inititalisation, and U-Boot
	  takes over once the RAM, video and CPU are fully running.
	  U-Boot is loaded as a fallback payload from Coreboot, in
	  Coreboot terminology. This method was used for the Chromebook
	  Pixel when launched.

config TARGET_CHROMEBOOK_LINK
	bool "Support Chromebook link"
	help
	  This is the Chromebook Pixel released in 2013. It uses an Intel
	  i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
	  SDRAM. It has a Panther Point platform controller hub, PCIe
	  WiFi and Bluetooth. It also includes a 720p webcam, USB SD
	  reader, microphone and speakers, display port and 32GB SATA
	  solid state drive. There is a Chrome OS EC connected on LPC,
	  and it provides a 2560x1700 high resolution touch-enabled LCD
	  display.

config TARGET_CHROMEBOX_PANTHER
	bool "Support Chromebox panther (not available)"
	select n
	help
	  Note: At present this must be used with Coreboot. See README.x86
	  for instructions.

	  This is the Asus Chromebox CN60 released in 2014. It uses an Intel
	  Haswell Celeron 2955U Dual Core CPU with 2GB of SDRAM. It has a
	  Lynx Point platform controller hub, PCIe WiFi and Bluetooth. It also
	  includes a USB SD reader, four USB3 ports, display port and HDMI
	  video output and a 16GB SATA solid state drive. There is no Chrome
	  OS EC on this model.

config TARGET_CROWNBAY
	bool "Support Intel Crown Bay CRB"
	help
	  This is the Intel Crown Bay Customer Reference Board. It contains
	  the Intel Atom Processor E6xx populated on the COM Express module
	  with 1GB DDR2 soldered down memory and a carrier board with the
	  Intel Platform Controller Hub EG20T, other system components and
	  peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.

config TARGET_MINNOWMAX
	bool "Support Intel Minnowboard MAX"
	help
	  This is the Intel Minnowboard MAX. It contains an Atom E3800
	  processor in a small form factor with Ethernet, micro-SD, USB 2,
	  USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
	  It requires some binary blobs - see README.x86 for details.

	  Note that PCIE_ECAM_BASE is set up by the FSP so the value used
	  by U-Boot matches that value.

config TARGET_GALILEO
	bool "Support Intel Galileo"
	help
	  This is the Intel Galileo board, which is the first in a family of
	  Arduino-certified development and prototyping boards based on Intel
	  architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
	  single-core, single-thread, Intel Pentium processor instrunction set
	  architecture (ISA) compatible, operating at speeds up to 400Mhz,
	  along with 256MB DDR3 memory. It supports a wide range of industry
	  standard I/O interfaces, including a full-sized mini-PCIe slot,
	  one 100Mb Ethernet port, a microSD card slot, a USB host port and
	  a USB client port.

endchoice

config DM
	default y

config DM_GPIO
	default y

config DM_SERIAL
	default y

config SYS_MALLOC_F_LEN
	default 0x800

config RAMBASE
	hex
	default 0x100000

config XIP_ROM_SIZE
	hex
	depends on X86_RESET_VECTOR
	default ROM_SIZE

config CPU_ADDR_BITS
	int
	default 36

config HPET_ADDRESS
	hex
	default 0xfed00000 if !HPET_ADDRESS_OVERRIDE

config SMM_TSEG
	bool
	default n

config SMM_TSEG_SIZE
	hex

config X86_RESET_VECTOR
	bool
	default n

config SYS_X86_START16
	hex
	depends on X86_RESET_VECTOR
	default 0xfffff800

config BOARD_ROMSIZE_KB_512
	bool
config BOARD_ROMSIZE_KB_1024
	bool
config BOARD_ROMSIZE_KB_2048
	bool
config BOARD_ROMSIZE_KB_4096
	bool
config BOARD_ROMSIZE_KB_8192
	bool
config BOARD_ROMSIZE_KB_16384
	bool

choice
	prompt "ROM chip size"
	depends on X86_RESET_VECTOR
	default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
	default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
	default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
	default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
	default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
	default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
	help
	  Select the size of the ROM chip you intend to flash U-Boot on.

	  The build system will take care of creating a u-boot.rom file
	  of the matching size.

config UBOOT_ROMSIZE_KB_512
	bool "512 KB"
	help
	  Choose this option if you have a 512 KB ROM chip.

config UBOOT_ROMSIZE_KB_1024
	bool "1024 KB (1 MB)"
	help
	  Choose this option if you have a 1024 KB (1 MB) ROM chip.

config UBOOT_ROMSIZE_KB_2048
	bool "2048 KB (2 MB)"
	help
	  Choose this option if you have a 2048 KB (2 MB) ROM chip.

config UBOOT_ROMSIZE_KB_4096
	bool "4096 KB (4 MB)"
	help
	  Choose this option if you have a 4096 KB (4 MB) ROM chip.

config UBOOT_ROMSIZE_KB_8192
	bool "8192 KB (8 MB)"
	help
	  Choose this option if you have a 8192 KB (8 MB) ROM chip.

config UBOOT_ROMSIZE_KB_16384
	bool "16384 KB (16 MB)"
	help
	  Choose this option if you have a 16384 KB (16 MB) ROM chip.

endchoice

# Map the config names to an integer (KB).
config UBOOT_ROMSIZE_KB
	int
	default 512 if UBOOT_ROMSIZE_KB_512
	default 1024 if UBOOT_ROMSIZE_KB_1024
	default 2048 if UBOOT_ROMSIZE_KB_2048
	default 4096 if UBOOT_ROMSIZE_KB_4096
	default 8192 if UBOOT_ROMSIZE_KB_8192
	default 16384 if UBOOT_ROMSIZE_KB_16384

# Map the config names to a hex value (bytes).
config ROM_SIZE
	hex
	default 0x80000 if UBOOT_ROMSIZE_KB_512
	default 0x100000 if UBOOT_ROMSIZE_KB_1024
	default 0x200000 if UBOOT_ROMSIZE_KB_2048
	default 0x400000 if UBOOT_ROMSIZE_KB_4096
	default 0x800000 if UBOOT_ROMSIZE_KB_8192
	default 0xc00000 if UBOOT_ROMSIZE_KB_12288
	default 0x1000000 if UBOOT_ROMSIZE_KB_16384

config HAVE_INTEL_ME
	bool "Platform requires Intel Management Engine"
	help
	  Newer higher-end devices have an Intel Management Engine (ME)
	  which is a very large binary blob (typically 1.5MB) which is
	  required for the platform to work. This enforces a particular
	  SPI flash format. You will need to supply the me.bin file in
	  your board directory.

config X86_RAMTEST
	bool "Perform a simple RAM test after SDRAM initialisation"
	help
	  If there is something wrong with SDRAM then the platform will
	  often crash within U-Boot or the kernel. This option enables a
	  very simple RAM test that quickly checks whether the SDRAM seems
	  to work correctly. It is not exhaustive but can save time by
	  detecting obvious failures.

config MARK_GRAPHICS_MEM_WRCOMB
	bool "Mark graphics memory as write-combining."
	default n
	help
	 The graphics performance may increase if the graphics
	 memory is set as write-combining cache type. This option
	 enables marking the graphics memory as write-combining.

menu "Display"

config FRAMEBUFFER_SET_VESA_MODE
	prompt "Set framebuffer graphics resolution"
	bool
	help
	  Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console)

choice
	prompt "framebuffer graphics resolution"
	default FRAMEBUFFER_VESA_MODE_117
	depends on FRAMEBUFFER_SET_VESA_MODE
	help
	  This option sets the resolution used for the coreboot framebuffer (and
	  bootsplash screen).

config FRAMEBUFFER_VESA_MODE_100
	bool "640x400 256-color"

config FRAMEBUFFER_VESA_MODE_101
	bool "640x480 256-color"

config FRAMEBUFFER_VESA_MODE_102
	bool "800x600 16-color"

config FRAMEBUFFER_VESA_MODE_103
	bool "800x600 256-color"

config FRAMEBUFFER_VESA_MODE_104
	bool "1024x768 16-color"

config FRAMEBUFFER_VESA_MODE_105
	bool "1024x7686 256-color"

config FRAMEBUFFER_VESA_MODE_106
	bool "1280x1024 16-color"

config FRAMEBUFFER_VESA_MODE_107
	bool "1280x1024 256-color"

config FRAMEBUFFER_VESA_MODE_108
	bool "80x60 text"

config FRAMEBUFFER_VESA_MODE_109
	bool "132x25 text"

config FRAMEBUFFER_VESA_MODE_10A
	bool "132x43 text"

config FRAMEBUFFER_VESA_MODE_10B
	bool "132x50 text"

config FRAMEBUFFER_VESA_MODE_10C
	bool "132x60 text"

config FRAMEBUFFER_VESA_MODE_10D
	bool "320x200 32k-color (1:5:5:5)"

config FRAMEBUFFER_VESA_MODE_10E
	bool "320x200 64k-color (5:6:5)"

config FRAMEBUFFER_VESA_MODE_10F
	bool "320x200 16.8M-color (8:8:8)"

config FRAMEBUFFER_VESA_MODE_110
	bool "640x480 32k-color (1:5:5:5)"

config FRAMEBUFFER_VESA_MODE_111
	bool "640x480 64k-color (5:6:5)"

config FRAMEBUFFER_VESA_MODE_112
	bool "640x480 16.8M-color (8:8:8)"

config FRAMEBUFFER_VESA_MODE_113
	bool "800x600 32k-color (1:5:5:5)"

config FRAMEBUFFER_VESA_MODE_114
	bool "800x600 64k-color (5:6:5)"

config FRAMEBUFFER_VESA_MODE_115
	bool "800x600 16.8M-color (8:8:8)"

config FRAMEBUFFER_VESA_MODE_116
	bool "1024x768 32k-color (1:5:5:5)"

config FRAMEBUFFER_VESA_MODE_117
	bool "1024x768 64k-color (5:6:5)"

config FRAMEBUFFER_VESA_MODE_118
	bool "1024x768 16.8M-color (8:8:8)"

config FRAMEBUFFER_VESA_MODE_119
	bool "1280x1024 32k-color (1:5:5:5)"

config FRAMEBUFFER_VESA_MODE_11A
	bool "1280x1024 64k-color (5:6:5)"

config FRAMEBUFFER_VESA_MODE_11B
	bool "1280x1024 16.8M-color (8:8:8)"

config FRAMEBUFFER_VESA_MODE_USER
	bool "Manually select VESA mode"

endchoice

# Map the config names to an integer (KB).
config FRAMEBUFFER_VESA_MODE
	prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
	hex
	default 0x100 if FRAMEBUFFER_VESA_MODE_100
	default 0x101 if FRAMEBUFFER_VESA_MODE_101
	default 0x102 if FRAMEBUFFER_VESA_MODE_102
	default 0x103 if FRAMEBUFFER_VESA_MODE_103
	default 0x104 if FRAMEBUFFER_VESA_MODE_104
	default 0x105 if FRAMEBUFFER_VESA_MODE_105
	default 0x106 if FRAMEBUFFER_VESA_MODE_106
	default 0x107 if FRAMEBUFFER_VESA_MODE_107
	default 0x108 if FRAMEBUFFER_VESA_MODE_108
	default 0x109 if FRAMEBUFFER_VESA_MODE_109
	default 0x10A if FRAMEBUFFER_VESA_MODE_10A
	default 0x10B if FRAMEBUFFER_VESA_MODE_10B
	default 0x10C if FRAMEBUFFER_VESA_MODE_10C
	default 0x10D if FRAMEBUFFER_VESA_MODE_10D
	default 0x10E if FRAMEBUFFER_VESA_MODE_10E
	default 0x10F if FRAMEBUFFER_VESA_MODE_10F
	default 0x110 if FRAMEBUFFER_VESA_MODE_110
	default 0x111 if FRAMEBUFFER_VESA_MODE_111
	default 0x112 if FRAMEBUFFER_VESA_MODE_112
	default 0x113 if FRAMEBUFFER_VESA_MODE_113
	default 0x114 if FRAMEBUFFER_VESA_MODE_114
	default 0x115 if FRAMEBUFFER_VESA_MODE_115
	default 0x116 if FRAMEBUFFER_VESA_MODE_116
	default 0x117 if FRAMEBUFFER_VESA_MODE_117
	default 0x118 if FRAMEBUFFER_VESA_MODE_118
	default 0x119 if FRAMEBUFFER_VESA_MODE_119
	default 0x11A if FRAMEBUFFER_VESA_MODE_11A
	default 0x11B if FRAMEBUFFER_VESA_MODE_11B
	default 0x117 if FRAMEBUFFER_VESA_MODE_USER

endmenu

config HAVE_FSP
	bool "Add an Firmware Support Package binary"
	help
	  Select this option to add an Firmware Support Package binary to
	  the resulting U-Boot image. It is a binary blob which U-Boot uses
	  to set up SDRAM and other chipset specific initialization.

	  Note: Without this binary U-Boot will not be able to set up its
	  SDRAM so will not boot.

config FSP_FILE
	string "Firmware Support Package binary filename"
	depends on HAVE_FSP
	default "fsp.bin"
	help
	  The filename of the file to use as Firmware Support Package binary
	  in the board directory.

config FSP_ADDR
	hex "Firmware Support Package binary location"
	depends on HAVE_FSP
	default 0xfffc0000
	help
	  FSP is not Position Independent Code (PIC) and the whole FSP has to
	  be rebased if it is placed at a location which is different from the
	  perferred base address specified during the FSP build. Use Intel's
	  Binary Configuration Tool (BCT) to do the rebase.

	  The default base address of 0xfffc0000 indicates that the binary must
	  be located at offset 0xc0000 from the beginning of a 1MB flash device.

config FSP_TEMP_RAM_ADDR
	hex
	default 0x2000000
	help
	  Stack top address which is used in FspInit after DRAM is ready and
	  CAR is disabled.

source "arch/x86/cpu/baytrail/Kconfig"

source "arch/x86/cpu/coreboot/Kconfig"

source "arch/x86/cpu/ivybridge/Kconfig"

source "arch/x86/cpu/quark/Kconfig"

source "arch/x86/cpu/queensbay/Kconfig"

config TSC_CALIBRATION_BYPASS
	bool "Bypass Time-Stamp Counter (TSC) calibration"
	default n
	help
	  By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
	  running frequency via Model-Specific Register (MSR) and Programmable
	  Interval Timer (PIT). If the calibration does not work on your board,
	  select this option and provide a hardcoded TSC running frequency with
	  CONFIG_TSC_FREQ_IN_MHZ below.

	  Normally this option should be turned on in a simulation environment
	  like qemu.

config TSC_FREQ_IN_MHZ
	int "Time-Stamp Counter (TSC) running frequency in MHz"
	depends on TSC_CALIBRATION_BYPASS
	default 1000
	help
	  The running frequency in MHz of Time-Stamp Counter (TSC).

source "board/coreboot/coreboot/Kconfig"

source "board/google/chromebook_link/Kconfig"

source "board/google/chromebox_panther/Kconfig"

source "board/intel/crownbay/Kconfig"

source "board/intel/minnowmax/Kconfig"

source "board/intel/galileo/Kconfig"

config PCIE_ECAM_BASE
	hex
	default 0xe0000000
	help
	  This is the memory-mapped address of PCI configuration space, which
	  is only available through the Enhanced Configuration Access
	  Mechanism (ECAM) with PCI Express. It can be set up almost
	  anywhere. Before it is set up, it is possible to access PCI
	  configuration space through I/O access, but memory access is more
	  convenient. Using this, PCI can be scanned and configured. This
	  should be set to a region that does not conflict with memory
	  assigned to PCI devices - i.e. the memory and prefetch regions, as
	  passed to pci_set_region().

endmenu