| /* |
| * ATI Radeon Video card Framebuffer driver. |
| * |
| * Copyright 2007 Freescale Semiconductor, Inc. |
| * Zhang Wei <wei.zhang@freescale.com> |
| * Jason Jin <jason.jin@freescale.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| * Some codes of this file is partly ported from Linux kernel |
| * ATI video framebuffer driver. |
| * |
| * Now the driver is tested on below ATI chips: |
| * 9200 |
| * X300 |
| * X700 |
| */ |
| |
| #include <common.h> |
| |
| #include <command.h> |
| #include <pci.h> |
| #include <asm/processor.h> |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| #include <malloc.h> |
| #include <video_fb.h> |
| #include "videomodes.h" |
| |
| #include <radeon.h> |
| #include "ati_ids.h" |
| #include "ati_radeon_fb.h" |
| |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| #define DPRINT(x...) printf(x) |
| #else |
| #define DPRINT(x...) do{}while(0) |
| #endif |
| |
| #define MAX_MAPPED_VRAM (2048*2048*4) |
| #define MIN_MAPPED_VRAM (1024*768*1) |
| |
| #define RADEON_BUFFER_ALIGN 0x00000fff |
| #define SURF_UPPER_BOUND(x,y,bpp) (((((x) * (((y) + 15) & ~15) * (bpp)/8) + RADEON_BUFFER_ALIGN) \ |
| & ~RADEON_BUFFER_ALIGN) - 1) |
| #define RADEON_CRT_PITCH(width, bpp) ((((width) * (bpp) + ((bpp) * 8 - 1)) / ((bpp) * 8)) | \ |
| ((((width) * (bpp) + ((bpp) * 8 - 1)) / ((bpp) * 8)) << 16)) |
| |
| #define CRTC_H_TOTAL_DISP_VAL(htotal, hdisp) \ |
| (((((htotal) / 8) - 1) & 0x3ff) | (((((hdisp) / 8) - 1) & 0x1ff) << 16)) |
| #define CRTC_HSYNC_STRT_WID_VAL(hsync_srtr, hsync_wid) \ |
| (((hsync_srtr) & 0x1fff) | (((hsync_wid) & 0x3f) << 16)) |
| #define CRTC_V_TOTAL_DISP_VAL(vtotal, vdisp) \ |
| ((((vtotal) - 1) & 0xffff) | (((vdisp) - 1) << 16)) |
| #define CRTC_VSYNC_STRT_WID_VAL(vsync_srtr, vsync_wid) \ |
| ((((vsync_srtr) - 1) & 0xfff) | (((vsync_wid) & 0x1f) << 16)) |
| |
| /*#define PCI_VENDOR_ID_ATI*/ |
| #define PCI_CHIP_RV280_5960 0x5960 |
| #define PCI_CHIP_RV280_5961 0x5961 |
| #define PCI_CHIP_RV280_5962 0x5962 |
| #define PCI_CHIP_RV280_5964 0x5964 |
| #define PCI_CHIP_RV280_5C63 0x5C63 |
| #define PCI_CHIP_RV370_5B60 0x5B60 |
| #define PCI_CHIP_RV380_5657 0x5657 |
| #define PCI_CHIP_R420_554d 0x554d |
| |
| static struct pci_device_id ati_radeon_pci_ids[] = { |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV280_5960}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV280_5961}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV280_5962}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV280_5964}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV280_5C63}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV370_5B60}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_RV380_5657}, |
| {PCI_VENDOR_ID_ATI, PCI_CHIP_R420_554d}, |
| {0, 0} |
| }; |
| |
| static u16 ati_radeon_id_family_table[][2] = { |
| {PCI_CHIP_RV280_5960, CHIP_FAMILY_RV280}, |
| {PCI_CHIP_RV280_5961, CHIP_FAMILY_RV280}, |
| {PCI_CHIP_RV280_5962, CHIP_FAMILY_RV280}, |
| {PCI_CHIP_RV280_5964, CHIP_FAMILY_RV280}, |
| {PCI_CHIP_RV280_5C63, CHIP_FAMILY_RV280}, |
| {PCI_CHIP_RV370_5B60, CHIP_FAMILY_RV380}, |
| {PCI_CHIP_RV380_5657, CHIP_FAMILY_RV380}, |
| {PCI_CHIP_R420_554d, CHIP_FAMILY_R420}, |
| {0, 0} |
| }; |
| |
| u16 get_radeon_id_family(u16 device) |
| { |
| int i; |
| for (i=0; ati_radeon_id_family_table[0][i]; i+=2) |
| if (ati_radeon_id_family_table[0][i] == device) |
| return ati_radeon_id_family_table[0][i + 1]; |
| return 0; |
| } |
| |
| struct radeonfb_info *rinfo; |
| |
| static void radeon_identify_vram(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| /* framebuffer size */ |
| if ((rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200) || |
| (rinfo->family == CHIP_FAMILY_RS300)) { |
| u32 tom = INREG(NB_TOM); |
| tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); |
| |
| radeon_fifo_wait(6); |
| OUTREG(MC_FB_LOCATION, tom); |
| OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); |
| OUTREG(OV0_BASE_ADDR, (tom & 0xffff) << 16); |
| |
| /* This is supposed to fix the crtc2 noise problem. */ |
| OUTREG(GRPH2_BUFFER_CNTL, INREG(GRPH2_BUFFER_CNTL) & ~0x7f0000); |
| |
| if ((rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200)) { |
| /* This is to workaround the asic bug for RMX, some versions |
| of BIOS dosen't have this register initialized correctly. |
| */ |
| OUTREGP(CRTC_MORE_CNTL, CRTC_H_CUTOFF_ACTIVE_EN, |
| ~CRTC_H_CUTOFF_ACTIVE_EN); |
| } |
| } else { |
| tmp = INREG(CONFIG_MEMSIZE); |
| } |
| |
| /* mem size is bits [28:0], mask off the rest */ |
| rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK; |
| |
| /* |
| * Hack to get around some busted production M6's |
| * reporting no ram |
| */ |
| if (rinfo->video_ram == 0) { |
| switch (rinfo->pdev.device) { |
| case PCI_CHIP_RADEON_LY: |
| case PCI_CHIP_RADEON_LZ: |
| rinfo->video_ram = 8192 * 1024; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * Now try to identify VRAM type |
| */ |
| if ((rinfo->family >= CHIP_FAMILY_R300) || |
| (INREG(MEM_SDRAM_MODE_REG) & (1<<30))) |
| rinfo->vram_ddr = 1; |
| else |
| rinfo->vram_ddr = 0; |
| |
| tmp = INREG(MEM_CNTL); |
| if (IS_R300_VARIANT(rinfo)) { |
| tmp &= R300_MEM_NUM_CHANNELS_MASK; |
| switch (tmp) { |
| case 0: rinfo->vram_width = 64; break; |
| case 1: rinfo->vram_width = 128; break; |
| case 2: rinfo->vram_width = 256; break; |
| default: rinfo->vram_width = 128; break; |
| } |
| } else if ((rinfo->family == CHIP_FAMILY_RV100) || |
| (rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200)){ |
| if (tmp & RV100_MEM_HALF_MODE) |
| rinfo->vram_width = 32; |
| else |
| rinfo->vram_width = 64; |
| } else { |
| if (tmp & MEM_NUM_CHANNELS_MASK) |
| rinfo->vram_width = 128; |
| else |
| rinfo->vram_width = 64; |
| } |
| |
| /* This may not be correct, as some cards can have half of channel disabled |
| * ToDo: identify these cases |
| */ |
| |
| DPRINT("radeonfb: Found %dk of %s %d bits wide videoram\n", |
| rinfo->video_ram / 1024, |
| rinfo->vram_ddr ? "DDR" : "SDRAM", |
| rinfo->vram_width); |
| |
| } |
| |
| static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs *mode) |
| { |
| int i; |
| |
| radeon_fifo_wait(20); |
| |
| #if 0 |
| /* Workaround from XFree */ |
| if (rinfo->is_mobility) { |
| /* A temporal workaround for the occational blanking on certain laptop |
| * panels. This appears to related to the PLL divider registers |
| * (fail to lock?). It occurs even when all dividers are the same |
| * with their old settings. In this case we really don't need to |
| * fiddle with PLL registers. By doing this we can avoid the blanking |
| * problem with some panels. |
| */ |
| if ((mode->ppll_ref_div == (INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK)) && |
| (mode->ppll_div_3 == (INPLL(PPLL_DIV_3) & |
| (PPLL_POST3_DIV_MASK | PPLL_FB3_DIV_MASK)))) { |
| /* We still have to force a switch to selected PPLL div thanks to |
| * an XFree86 driver bug which will switch it away in some cases |
| * even when using UseFDev */ |
| OUTREGP(CLOCK_CNTL_INDEX, |
| mode->clk_cntl_index & PPLL_DIV_SEL_MASK, |
| ~PPLL_DIV_SEL_MASK); |
| radeon_pll_errata_after_index(rinfo); |
| radeon_pll_errata_after_data(rinfo); |
| return; |
| } |
| } |
| #endif |
| if(rinfo->pdev.device == PCI_CHIP_RV370_5B60) return; |
| |
| /* Swich VCKL clock input to CPUCLK so it stays fed while PPLL updates*/ |
| OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_CPUCLK, ~VCLK_SRC_SEL_MASK); |
| |
| /* Reset PPLL & enable atomic update */ |
| OUTPLLP(PPLL_CNTL, |
| PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN, |
| ~(PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN)); |
| |
| /* Switch to selected PPLL divider */ |
| OUTREGP(CLOCK_CNTL_INDEX, |
| mode->clk_cntl_index & PPLL_DIV_SEL_MASK, |
| ~PPLL_DIV_SEL_MASK); |
| |
| /* Set PPLL ref. div */ |
| if (rinfo->family == CHIP_FAMILY_R300 || |
| rinfo->family == CHIP_FAMILY_RS300 || |
| rinfo->family == CHIP_FAMILY_R350 || |
| rinfo->family == CHIP_FAMILY_RV350) { |
| if (mode->ppll_ref_div & R300_PPLL_REF_DIV_ACC_MASK) { |
| /* When restoring console mode, use saved PPLL_REF_DIV |
| * setting. |
| */ |
| OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, 0); |
| } else { |
| /* R300 uses ref_div_acc field as real ref divider */ |
| OUTPLLP(PPLL_REF_DIV, |
| (mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT), |
| ~R300_PPLL_REF_DIV_ACC_MASK); |
| } |
| } else |
| OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, ~PPLL_REF_DIV_MASK); |
| |
| /* Set PPLL divider 3 & post divider*/ |
| OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_FB3_DIV_MASK); |
| OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_POST3_DIV_MASK); |
| |
| /* Write update */ |
| while (INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R) |
| ; |
| OUTPLLP(PPLL_REF_DIV, PPLL_ATOMIC_UPDATE_W, ~PPLL_ATOMIC_UPDATE_W); |
| |
| /* Wait read update complete */ |
| /* FIXME: Certain revisions of R300 can't recover here. Not sure of |
| the cause yet, but this workaround will mask the problem for now. |
| Other chips usually will pass at the very first test, so the |
| workaround shouldn't have any effect on them. */ |
| for (i = 0; (i < 10000 && INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); i++) |
| ; |
| |
| OUTPLL(HTOTAL_CNTL, 0); |
| |
| /* Clear reset & atomic update */ |
| OUTPLLP(PPLL_CNTL, 0, |
| ~(PPLL_RESET | PPLL_SLEEP | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN)); |
| |
| /* We may want some locking ... oh well */ |
| udelay(5000); |
| |
| /* Switch back VCLK source to PPLL */ |
| OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_PPLLCLK, ~VCLK_SRC_SEL_MASK); |
| } |
| |
| typedef struct { |
| u16 reg; |
| u32 val; |
| } reg_val; |
| |
| #if 0 /* unused ? -> scheduled for removal */ |
| /* these common regs are cleared before mode setting so they do not |
| * interfere with anything |
| */ |
| static reg_val common_regs[] = { |
| { OVR_CLR, 0 }, |
| { OVR_WID_LEFT_RIGHT, 0 }, |
| { OVR_WID_TOP_BOTTOM, 0 }, |
| { OV0_SCALE_CNTL, 0 }, |
| { SUBPIC_CNTL, 0 }, |
| { VIPH_CONTROL, 0 }, |
| { I2C_CNTL_1, 0 }, |
| { GEN_INT_CNTL, 0 }, |
| { CAP0_TRIG_CNTL, 0 }, |
| { CAP1_TRIG_CNTL, 0 }, |
| }; |
| #endif /* 0 */ |
| |
| void radeon_setmode(void) |
| { |
| struct radeon_regs *mode = malloc(sizeof(struct radeon_regs)); |
| |
| mode->crtc_gen_cntl = 0x03000200; |
| mode->crtc_ext_cntl = 0x00008048; |
| mode->dac_cntl = 0xff002100; |
| mode->crtc_h_total_disp = 0x4f0063; |
| mode->crtc_h_sync_strt_wid = 0x8c02a2; |
| mode->crtc_v_total_disp = 0x01df020c; |
| mode->crtc_v_sync_strt_wid = 0x8201ea; |
| mode->crtc_pitch = 0x00500050; |
| |
| OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl); |
| OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl, |
| ~(CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS)); |
| OUTREGP(DAC_CNTL, mode->dac_cntl, DAC_RANGE_CNTL | DAC_BLANKING); |
| OUTREG(CRTC_H_TOTAL_DISP, mode->crtc_h_total_disp); |
| OUTREG(CRTC_H_SYNC_STRT_WID, mode->crtc_h_sync_strt_wid); |
| OUTREG(CRTC_V_TOTAL_DISP, mode->crtc_v_total_disp); |
| OUTREG(CRTC_V_SYNC_STRT_WID, mode->crtc_v_sync_strt_wid); |
| OUTREG(CRTC_OFFSET, 0); |
| OUTREG(CRTC_OFFSET_CNTL, 0); |
| OUTREG(CRTC_PITCH, mode->crtc_pitch); |
| |
| mode->clk_cntl_index = 0x300; |
| mode->ppll_ref_div = 0xc; |
| mode->ppll_div_3 = 0x00030059; |
| |
| radeon_write_pll_regs(rinfo, mode); |
| } |
| |
| static void set_pal(void) |
| { |
| int idx, val = 0; |
| |
| for (idx = 0; idx < 256; idx++) { |
| OUTREG8(PALETTE_INDEX, idx); |
| OUTREG(PALETTE_DATA, val); |
| val += 0x00010101; |
| } |
| } |
| |
| void radeon_setmode_9200(int vesa_idx, int bpp) |
| { |
| struct radeon_regs *mode = malloc(sizeof(struct radeon_regs)); |
| |
| mode->crtc_gen_cntl = CRTC_EN | CRTC_EXT_DISP_EN; |
| mode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN | CRTC_CRT_ON; |
| mode->dac_cntl = DAC_MASK_ALL | DAC_VGA_ADR_EN | DAC_8BIT_EN; |
| mode->crtc_offset_cntl = CRTC_OFFSET_CNTL__CRTC_TILE_EN; |
| |
| switch (bpp) { |
| case 24: |
| mode->crtc_gen_cntl |= 0x6 << 8; /* x888 */ |
| #if defined(__BIG_ENDIAN) |
| mode->surface_cntl = NONSURF_AP0_SWP_32BPP | NONSURF_AP1_SWP_32BPP; |
| mode->surf_info[0] = NONSURF_AP0_SWP_32BPP | NONSURF_AP1_SWP_32BPP; |
| #endif |
| break; |
| case 16: |
| mode->crtc_gen_cntl |= 0x4 << 8; /* 565 */ |
| #if defined(__BIG_ENDIAN) |
| mode->surface_cntl = NONSURF_AP0_SWP_16BPP | NONSURF_AP1_SWP_16BPP; |
| mode->surf_info[0] = NONSURF_AP0_SWP_16BPP | NONSURF_AP1_SWP_16BPP; |
| #endif |
| break; |
| default: |
| mode->crtc_gen_cntl |= 0x2 << 8; /* palette */ |
| mode->surface_cntl = 0x00000000; |
| break; |
| } |
| |
| switch (vesa_idx) { |
| case RES_MODE_1280x1024: |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(1688,1280); |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(1066,1024); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(1025,3); |
| #if defined(CONFIG_RADEON_VREFRESH_75HZ) |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(1288,18); |
| mode->ppll_div_3 = 0x00010078; |
| #else /* default @ 60 Hz */ |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(1320,14); |
| mode->ppll_div_3 = 0x00010060; |
| #endif |
| /* |
| * for this mode pitch expands to the same value for 32, 16 and 8 bpp, |
| * so we set it here once only. |
| */ |
| mode->crtc_pitch = RADEON_CRT_PITCH(1280,32); |
| switch (bpp) { |
| case 24: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (1280 * 4 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1280,1024,32); |
| break; |
| case 16: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (1280 * 2 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1280,1024,16); |
| break; |
| default: /* 8 bpp */ |
| mode->surf_info[0] = R200_SURF_TILE_COLOR_MACRO | (1280 * 1 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1280,1024,8); |
| break; |
| } |
| break; |
| case RES_MODE_1024x768: |
| #if defined(CONFIG_RADEON_VREFRESH_75HZ) |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(1312,1024); |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(1032,12); |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(800,768); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(769,3); |
| mode->ppll_div_3 = 0x0002008c; |
| #else /* @ 60 Hz */ |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(1344,1024); |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(1040,17) | CRTC_H_SYNC_POL; |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(806,768); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(771,6) | CRTC_V_SYNC_POL; |
| mode->ppll_div_3 = 0x00020074; |
| #endif |
| /* also same pitch value for 32, 16 and 8 bpp */ |
| mode->crtc_pitch = RADEON_CRT_PITCH(1024,32); |
| switch (bpp) { |
| case 24: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (1024 * 4 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1024,768,32); |
| break; |
| case 16: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (1024 * 2 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1024,768,16); |
| break; |
| default: /* 8 bpp */ |
| mode->surf_info[0] = R200_SURF_TILE_COLOR_MACRO | (1024 * 1 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1024,768,8); |
| break; |
| } |
| break; |
| case RES_MODE_800x600: |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(1056,800); |
| #if defined(CONFIG_RADEON_VREFRESH_75HZ) |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(808,10); |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(625,600); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(601,3); |
| mode->ppll_div_3 = 0x000300b0; |
| #else /* @ 60 Hz */ |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(832,16); |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(628,600); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(601,4); |
| mode->ppll_div_3 = 0x0003008e; |
| #endif |
| switch (bpp) { |
| case 24: |
| mode->crtc_pitch = RADEON_CRT_PITCH(832,32); |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (832 * 4 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(832,600,32); |
| break; |
| case 16: |
| mode->crtc_pitch = RADEON_CRT_PITCH(896,16); |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (896 * 2 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(896,600,16); |
| break; |
| default: /* 8 bpp */ |
| mode->crtc_pitch = RADEON_CRT_PITCH(1024,8); |
| mode->surf_info[0] = R200_SURF_TILE_COLOR_MACRO | (1024 * 1 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(1024,600,8); |
| break; |
| } |
| break; |
| default: /* RES_MODE_640x480 */ |
| #if defined(CONFIG_RADEON_VREFRESH_75HZ) |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(840,640); |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(648,8) | CRTC_H_SYNC_POL; |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(500,480); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(481,3) | CRTC_V_SYNC_POL; |
| mode->ppll_div_3 = 0x00030070; |
| #else /* @ 60 Hz */ |
| mode->crtc_h_total_disp = CRTC_H_TOTAL_DISP_VAL(800,640); |
| mode->crtc_h_sync_strt_wid = CRTC_HSYNC_STRT_WID_VAL(674,12) | CRTC_H_SYNC_POL; |
| mode->crtc_v_total_disp = CRTC_V_TOTAL_DISP_VAL(525,480); |
| mode->crtc_v_sync_strt_wid = CRTC_VSYNC_STRT_WID_VAL(491,2) | CRTC_V_SYNC_POL; |
| mode->ppll_div_3 = 0x00030059; |
| #endif |
| /* also same pitch value for 32, 16 and 8 bpp */ |
| mode->crtc_pitch = RADEON_CRT_PITCH(640,32); |
| switch (bpp) { |
| case 24: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (640 * 4 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(640,480,32); |
| break; |
| case 16: |
| mode->surf_info[0] |= R200_SURF_TILE_COLOR_MACRO | (640 * 2 / 16); |
| mode->surf_upper_bound[0] = SURF_UPPER_BOUND(640,480,16); |
| break; |
| default: /* 8 bpp */ |
| mode->crtc_offset_cntl = 0x00000000; |
| break; |
| } |
| break; |
| } |
| |
| OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl | CRTC_DISP_REQ_EN_B); |
| OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl, |
| (CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS)); |
| OUTREGP(DAC_CNTL, mode->dac_cntl, DAC_RANGE_CNTL | DAC_BLANKING); |
| OUTREG(CRTC_H_TOTAL_DISP, mode->crtc_h_total_disp); |
| OUTREG(CRTC_H_SYNC_STRT_WID, mode->crtc_h_sync_strt_wid); |
| OUTREG(CRTC_V_TOTAL_DISP, mode->crtc_v_total_disp); |
| OUTREG(CRTC_V_SYNC_STRT_WID, mode->crtc_v_sync_strt_wid); |
| OUTREG(CRTC_OFFSET, 0); |
| OUTREG(CRTC_OFFSET_CNTL, mode->crtc_offset_cntl); |
| OUTREG(CRTC_PITCH, mode->crtc_pitch); |
| OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl); |
| |
| mode->clk_cntl_index = 0x300; |
| mode->ppll_ref_div = 0xc; |
| |
| radeon_write_pll_regs(rinfo, mode); |
| |
| OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl, |
| ~(CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS)); |
| OUTREG(SURFACE0_INFO, mode->surf_info[0]); |
| OUTREG(SURFACE0_LOWER_BOUND, 0); |
| OUTREG(SURFACE0_UPPER_BOUND, mode->surf_upper_bound[0]); |
| OUTREG(SURFACE_CNTL, mode->surface_cntl); |
| |
| if (bpp > 8) |
| set_pal(); |
| |
| free(mode); |
| } |
| |
| #include "../bios_emulator/include/biosemu.h" |
| extern int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp); |
| |
| int radeon_probe(struct radeonfb_info *rinfo) |
| { |
| pci_dev_t pdev; |
| u16 did; |
| |
| pdev = pci_find_devices(ati_radeon_pci_ids, 0); |
| |
| if (pdev != -1) { |
| pci_read_config_word(pdev, PCI_DEVICE_ID, &did); |
| printf("ATI Radeon video card (%04x, %04x) found @(%d:%d:%d)\n", |
| PCI_VENDOR_ID_ATI, did, (pdev >> 16) & 0xff, |
| (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7); |
| |
| strcpy(rinfo->name, "ATI Radeon"); |
| rinfo->pdev.vendor = PCI_VENDOR_ID_ATI; |
| rinfo->pdev.device = did; |
| rinfo->family = get_radeon_id_family(rinfo->pdev.device); |
| pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, |
| &rinfo->fb_base_bus); |
| pci_read_config_dword(pdev, PCI_BASE_ADDRESS_2, |
| &rinfo->mmio_base_bus); |
| rinfo->fb_base_bus &= 0xfffff000; |
| rinfo->mmio_base_bus &= ~0x04; |
| |
| rinfo->mmio_base = pci_bus_to_virt(pdev, rinfo->mmio_base_bus, |
| PCI_REGION_MEM, 0, MAP_NOCACHE); |
| DPRINT("rinfo->mmio_base = 0x%p bus=0x%x\n", |
| rinfo->mmio_base, rinfo->mmio_base_bus); |
| rinfo->fb_local_base = INREG(MC_FB_LOCATION) << 16; |
| DPRINT("rinfo->fb_local_base = 0x%x\n",rinfo->fb_local_base); |
| /* PostBIOS with x86 emulater */ |
| if (!BootVideoCardBIOS(pdev, NULL, 0)) |
| return -1; |
| |
| /* |
| * Check for errata |
| * (These will be added in the future for the chipfamily |
| * R300, RV200, RS200, RV100, RS100.) |
| */ |
| |
| /* Get VRAM size and type */ |
| radeon_identify_vram(rinfo); |
| |
| rinfo->mapped_vram = min_t(unsigned long, MAX_MAPPED_VRAM, |
| rinfo->video_ram); |
| rinfo->fb_base = pci_bus_to_virt(pdev, rinfo->fb_base_bus, |
| PCI_REGION_MEM, 0, MAP_NOCACHE); |
| DPRINT("Radeon: framebuffer base address 0x%08x, " |
| "bus address 0x%08x\n" |
| "MMIO base address 0x%08x, bus address 0x%08x, " |
| "framebuffer local base 0x%08x.\n ", |
| (u32)rinfo->fb_base, rinfo->fb_base_bus, |
| (u32)rinfo->mmio_base, rinfo->mmio_base_bus, |
| rinfo->fb_local_base); |
| return 0; |
| } |
| return -1; |
| } |
| |
| /* |
| * The Graphic Device |
| */ |
| GraphicDevice ctfb; |
| |
| #define CURSOR_SIZE 0x1000 /* in KByte for HW Cursor */ |
| #define PATTERN_ADR (pGD->dprBase + CURSOR_SIZE) /* pattern Memory after Cursor Memory */ |
| #define PATTERN_SIZE 8*8*4 /* 4 Bytes per Pixel 8 x 8 Pixel */ |
| #define ACCELMEMORY (CURSOR_SIZE + PATTERN_SIZE) /* reserved Memory for BITBlt and hw cursor */ |
| |
| void *video_hw_init(void) |
| { |
| GraphicDevice *pGD = (GraphicDevice *) & ctfb; |
| u32 *vm; |
| char *penv; |
| unsigned long t1, hsynch, vsynch; |
| int bits_per_pixel, i, tmp, vesa_idx = 0, videomode; |
| struct ctfb_res_modes *res_mode; |
| struct ctfb_res_modes var_mode; |
| |
| rinfo = malloc(sizeof(struct radeonfb_info)); |
| |
| printf("Video: "); |
| if(radeon_probe(rinfo)) { |
| printf("No radeon video card found!\n"); |
| return NULL; |
| } |
| |
| tmp = 0; |
| |
| videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE; |
| /* get video mode via environment */ |
| if ((penv = getenv ("videomode")) != NULL) { |
| /* deceide if it is a string */ |
| if (penv[0] <= '9') { |
| videomode = (int) simple_strtoul (penv, NULL, 16); |
| tmp = 1; |
| } |
| } else { |
| tmp = 1; |
| } |
| if (tmp) { |
| /* parameter are vesa modes */ |
| /* search params */ |
| for (i = 0; i < VESA_MODES_COUNT; i++) { |
| if (vesa_modes[i].vesanr == videomode) |
| break; |
| } |
| if (i == VESA_MODES_COUNT) { |
| printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE); |
| i = 0; |
| } |
| res_mode = (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].resindex]; |
| bits_per_pixel = vesa_modes[i].bits_per_pixel; |
| vesa_idx = vesa_modes[i].resindex; |
| } else { |
| res_mode = (struct ctfb_res_modes *) &var_mode; |
| bits_per_pixel = video_get_params (res_mode, penv); |
| } |
| |
| /* calculate hsynch and vsynch freq (info only) */ |
| t1 = (res_mode->left_margin + res_mode->xres + |
| res_mode->right_margin + res_mode->hsync_len) / 8; |
| t1 *= 8; |
| t1 *= res_mode->pixclock; |
| t1 /= 1000; |
| hsynch = 1000000000L / t1; |
| t1 *= (res_mode->upper_margin + res_mode->yres + |
| res_mode->lower_margin + res_mode->vsync_len); |
| t1 /= 1000; |
| vsynch = 1000000000L / t1; |
| |
| /* fill in Graphic device struct */ |
| sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, |
| res_mode->yres, bits_per_pixel, (hsynch / 1000), |
| (vsynch / 1000)); |
| printf ("%s\n", pGD->modeIdent); |
| pGD->winSizeX = res_mode->xres; |
| pGD->winSizeY = res_mode->yres; |
| pGD->plnSizeX = res_mode->xres; |
| pGD->plnSizeY = res_mode->yres; |
| |
| switch (bits_per_pixel) { |
| case 24: |
| pGD->gdfBytesPP = 4; |
| pGD->gdfIndex = GDF_32BIT_X888RGB; |
| if (res_mode->xres == 800) { |
| pGD->winSizeX = 832; |
| pGD->plnSizeX = 832; |
| } |
| break; |
| case 16: |
| pGD->gdfBytesPP = 2; |
| pGD->gdfIndex = GDF_16BIT_565RGB; |
| if (res_mode->xres == 800) { |
| pGD->winSizeX = 896; |
| pGD->plnSizeX = 896; |
| } |
| break; |
| default: |
| if (res_mode->xres == 800) { |
| pGD->winSizeX = 1024; |
| pGD->plnSizeX = 1024; |
| } |
| pGD->gdfBytesPP = 1; |
| pGD->gdfIndex = GDF__8BIT_INDEX; |
| break; |
| } |
| |
| pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS; |
| pGD->pciBase = (unsigned int)rinfo->fb_base; |
| pGD->frameAdrs = (unsigned int)rinfo->fb_base; |
| pGD->memSize = 64 * 1024 * 1024; |
| |
| /* Cursor Start Address */ |
| pGD->dprBase = (pGD->winSizeX * pGD->winSizeY * pGD->gdfBytesPP) + |
| (unsigned int)rinfo->fb_base; |
| if ((pGD->dprBase & 0x0fff) != 0) { |
| /* allign it */ |
| pGD->dprBase &= 0xfffff000; |
| pGD->dprBase += 0x00001000; |
| } |
| DPRINT ("Cursor Start %x Pattern Start %x\n", pGD->dprBase, |
| PATTERN_ADR); |
| pGD->vprBase = (unsigned int)rinfo->fb_base; /* Dummy */ |
| pGD->cprBase = (unsigned int)rinfo->fb_base; /* Dummy */ |
| /* set up Hardware */ |
| |
| /* Clear video memory (only visible screen area) */ |
| i = pGD->winSizeX * pGD->winSizeY * pGD->gdfBytesPP / 4; |
| vm = (unsigned int *) pGD->pciBase; |
| while (i--) |
| *vm++ = 0; |
| /*SetDrawingEngine (bits_per_pixel);*/ |
| |
| if (rinfo->family == CHIP_FAMILY_RV280) |
| radeon_setmode_9200(vesa_idx, bits_per_pixel); |
| else |
| radeon_setmode(); |
| |
| return ((void *) pGD); |
| } |
| |
| void video_set_lut (unsigned int index, /* color number */ |
| unsigned char r, /* red */ |
| unsigned char g, /* green */ |
| unsigned char b /* blue */ |
| ) |
| { |
| OUTREG(PALETTE_INDEX, index); |
| OUTREG(PALETTE_DATA, (r << 16) | (g << 8) | b); |
| } |