include/configs/IPHASE4539.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
  *
  * This file is based on similar values for other boards found in
  * other U-Boot config files, mainly tqm8260.h and mpc8260ads.h.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 /*
  * Config header file for a Interphase 4539 PMC, 64 MB SDRAM, 4MB Flash.
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_IPHASE4539	1	/* ...on a Interphase 4539 PMC */

 #define	CONFIG_SYS_TEXT_BASE	0xffb00000

 #define CONFIG_CPM2		1	/* Has a CPM2 */

 /*-----------------------------------------------------------------------
  * select serial console configuration
  *
  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  * for SCC).
  *
  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  * defined elsewhere (for example, on the cogent platform, there are serial
  * ports on the motherboard which are used for the serial console - see
  * cogent/cma101/serial.[ch]).
  */
 #define	CONFIG_CONS_ON_SMC		/* define if console on SMC */
 #undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
 #undef	CONFIG_CONS_NONE		/* define if console on something else */
 #define CONFIG_CONS_INDEX	1	/* which serial channel for console */

 /*-----------------------------------------------------------------------
  * select ethernet configuration
  *
  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
 #define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
 #define CONFIG_ETHER_INDEX	3	/* which channel for ether  */

 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)

 /*-----------------------------------------------------------------------
  * - Rx-CLK is CLK14
  * - Tx-CLK is CLK16
  * - Select bus for bd/buffers (see 28-13)
  * - Half duplex
  */
 # define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
 # define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)

 #endif	/* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */

 /* other options */

 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 #define CONFIG_BAUDRATE		19200

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE

 /*
  * select i2c support configuration
  *
  * Supported configurations are {none, software, hardware} drivers.
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SOFT_SPEED	400000
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
 #define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE	(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
 #define I2C_READ	((iop->pdat & 0x00010000) != 0)
 #define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
 			else    iop->pdat &= ~0x00010000
 #define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>


 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/ram rw"

 #if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
 #define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #endif

 #undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */

 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15 MB in DRAM	*/

 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passed to Linux in MHz */
 					/* for versions < 2.4.5-pre5	 */

 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/

 #define CONFIG_SYS_RESET_ADDRESS	0x04400000

 #define CONFIG_MISC_INIT_R	1	/* We need misc_init_r()	*/

 /*-----------------------------------------------------------------------
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration (Setup by the
  * startup code). Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0.
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFF800000

 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)     /* Reserve 256 kB for Monitor  */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */

 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
 #define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
 #define CONFIG_SYS_MAX_FLASH_SIZE	(CONFIG_SYS_MAX_FLASH_SECT * 0x10000)	/* 4 MB */

 #define CONFIG_SYS_FLASH_ERASE_TOUT	2400000	/* Flash Erase Timeout (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/

 /* Environment in FLASH, there is little space left in Serial EEPROM */
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x10000 /* We use one complete sector	*/
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x10000) /* 2. sector */


 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
  * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
  * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS01 | HRCW_EBM )		|\
 			  ( HRCW_L2CPC10 | HRCW_ISB110 )	|\
 			  ( HRCW_MMR11 | HRCW_APPC10 )		|\
 			  ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	 \
 			) /* 0x14863245 */

 /* no slaves */
 #define CONFIG_SYS_HRCW_SLAVE1 0
 #define CONFIG_SYS_HRCW_SLAVE2 0
 #define CONFIG_SYS_HRCW_SLAVE3 0
 #define CONFIG_SYS_HRCW_SLAVE4 0
 #define CONFIG_SYS_HRCW_SLAVE5 0
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0

 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CONFIG_SYS_IMMR		0xFF000000 /* We keep original value */

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
 #define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32     /* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_SYS_CACHELINE_SHIFT	5      /* log base 2 of the above value */
 #endif

 /*-----------------------------------------------------------------------
  * HIDx - Hardware Implementation-dependent Registers		2-11
  *-----------------------------------------------------------------------
  * HID0 also contains cache control.
  *
  * HID1 has only read-only information - nothing to set.
  */
 #define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 			 HID0_IFEM|HID0_ABE)
 #define CONFIG_SYS_HID0_FINAL	(HID0_IFEM|HID0_ABE)
 #define CONFIG_SYS_HID2	0

 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
 #define CONFIG_SYS_RMR		RMR_CSRE

 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_BCR		0xA01C0000

 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_SIUMCR	0X4205C000

 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				 4-35
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined (CONFIG_WATCHDOG)
 #define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
 #define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */

 /*-----------------------------------------------------------------------
  * TMCNTSC - Time Counter Status and Control			 4-40
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
 #define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)

 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
 #define CONFIG_SYS_SCCR	0

 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_RCCR	0

 /*-----------------------------------------------------------------------
  * Init Memory Controller:
  *
  * Bank Bus	Machine PortSz	Device
  * ---- ---	------- ------	------
  *  0	60x	GPCM	64 bit	FLASH
  *  1	60x	SDRAM	64 bit	SDRAM
  */

 #define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) | 0x0801)
 #define CONFIG_SYS_OR0_PRELIM	0xFF800882
 #define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) | 0x0041)
 #define CONFIG_SYS_OR1_PRELIM	0xF8002CD0

 #define CONFIG_SYS_PSDMR	0x404A241A
 #define CONFIG_SYS_MPTPR	0x00007400
 #define CONFIG_SYS_PSRT	0x00000007

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
	*
	* This file is based on similar values for other boards found in
	* other U-Boot config files, mainly tqm8260.h and mpc8260ads.h.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	/*
	* Config header file for a Interphase 4539 PMC, 64 MB SDRAM, 4MB Flash.
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*-----------------------------------------------------------------------
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */

	#define CONFIG_SYS_TEXT_BASE 0xffb00000

	#define CONFIG_CPM2 1 /* Has a CPM2 */

	/*-----------------------------------------------------------------------
	* select serial console configuration
	*
	* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*
	* if CONFIG_CONS_NONE is defined, then the serial console routines must
	* defined elsewhere (for example, on the cogent platform, there are serial
	* ports on the motherboard which are used for the serial console - see
	* cogent/cma101/serial.[ch]).
	*/
	#define CONFIG_CONS_ON_SMC /* define if console on SMC */
	#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
	#undef CONFIG_CONS_NONE /* define if console on something else */
	#define CONFIG_CONS_INDEX 1 /* which serial channel for console */

	/*-----------------------------------------------------------------------
	* select ethernet configuration
	*
	* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
	* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
	* for FCC)
	*
	* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
	* defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
	*/
	#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
	#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
	#undef CONFIG_ETHER_NONE /* define if ether on something else */
	#define CONFIG_ETHER_INDEX 3 /* which channel for ether */

	#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)

	/*-----------------------------------------------------------------------
	* - Rx-CLK is CLK14
	* - Tx-CLK is CLK16
	* - Select bus for bd/buffers (see 28-13)
	* - Half duplex
	*/
	# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 \| CMXFCR_RF3CS_MSK \| CMXFCR_TF3CS_MSK)
	# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK14 \| CMXFCR_TF3CS_CLK16)
	# define CONFIG_SYS_CPMFCR_RAMTYPE 0
	# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE\|FCC_PSMR_LPB)

	#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */

	/* other options */

	#define CONFIG_8260_CLKIN 66666666 /* in Hz */
	#define CONFIG_BAUDRATE 19200

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_BOOTFILESIZE

	/*
	* select i2c support configuration
	*
	* Supported configurations are {none, software, hardware} drivers.
	* If the software driver is chosen, there are some additional
	* configuration items that the driver uses to drive the port pins.
	*/
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
	#define CONFIG_SYS_I2C_SOFT_SPEED 400000
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
	/*
	* Software (bit-bang) I2C driver configuration
	*/
	#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
	#define I2C_ACTIVE (iop->pdir \|= 0x00010000)
	#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
	#define I2C_READ ((iop->pdat & 0x00010000) != 0)
	#define I2C_SDA(bit) if(bit) iop->pdat \|= 0x00010000; \
	else iop->pdat &= ~0x00010000
	#define I2C_SCL(bit) if(bit) iop->pdat \|= 0x00020000; \
	else iop->pdat &= ~0x00020000
	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>


	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
	#define CONFIG_BOOTARGS "root=/dev/ram rw"

	#if defined(CONFIG_CMD_KGDB)
	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	#endif

	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*-----------------------------------------------------------------------
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15 MB in DRAM */

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passed to Linux in MHz */
	/* for versions < 2.4.5-pre5 */

	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

	#define CONFIG_SYS_RESET_ADDRESS 0x04400000

	#define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */

	/*-----------------------------------------------------------------------
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration (Setup by the
	* startup code). Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0.
	*/
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_FLASH_BASE 0xFF800000

	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */

	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
	#define CONFIG_SYS_MAX_FLASH_SIZE (CONFIG_SYS_MAX_FLASH_SECT * 0x10000) /* 4 MB */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 2400000 /* Flash Erase Timeout (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */

	/* Environment in FLASH, there is little space left in Serial EEPROM */
	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x10000) /* 2. sector */


	/*-----------------------------------------------------------------------
	* Hard Reset Configuration Words
	*
	* if you change bits in the HRCW, you must also change the CONFIG_SYS_*
	* defines for the various registers affected by the HRCW e.g. changing
	* HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
	*/
	#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS01 \| HRCW_EBM ) \|\
	( HRCW_L2CPC10 \| HRCW_ISB110 ) \|\
	( HRCW_MMR11 \| HRCW_APPC10 ) \|\
	( HRCW_CS10PC01 \| HRCW_MODCK_H0101 ) \
	) /* 0x14863245 */

	/* no slaves */
	#define CONFIG_SYS_HRCW_SLAVE1 0
	#define CONFIG_SYS_HRCW_SLAVE2 0
	#define CONFIG_SYS_HRCW_SLAVE3 0
	#define CONFIG_SYS_HRCW_SLAVE4 0
	#define CONFIG_SYS_HRCW_SLAVE5 0
	#define CONFIG_SYS_HRCW_SLAVE6 0
	#define CONFIG_SYS_HRCW_SLAVE7 0

	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CONFIG_SYS_IMMR 0xFF000000 /* We keep original value */

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
	#if defined(CONFIG_CMD_KGDB)
	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* HIDx - Hardware Implementation-dependent Registers 2-11
	*-----------------------------------------------------------------------
	* HID0 also contains cache control.
	*
	* HID1 has only read-only information - nothing to set.
	*/
	#define CONFIG_SYS_HID0_INIT (HID0_ICE\|HID0_DCE\|HID0_ICFI\|HID0_DCI\|\
	HID0_IFEM\|HID0_ABE)
	#define CONFIG_SYS_HID0_FINAL (HID0_IFEM\|HID0_ABE)
	#define CONFIG_SYS_HID2 0

	/*-----------------------------------------------------------------------
	* RMR - Reset Mode Register 5-5
	*-----------------------------------------------------------------------
	* turn on Checkstop Reset Enable
	*/
	#define CONFIG_SYS_RMR RMR_CSRE

	/*-----------------------------------------------------------------------
	* BCR - Bus Configuration 4-25
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_BCR 0xA01C0000

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 4-31
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_SIUMCR 0X4205C000

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 4-35
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
	*/
	#if defined (CONFIG_WATCHDOG)
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC\|SYPCR_BMT\|SYPCR_PBME\|SYPCR_LBME\|\
	SYPCR_SWRI\|SYPCR_SWP\|SYPCR_SWE)
	#else
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC\|SYPCR_BMT\|SYPCR_PBME\|SYPCR_LBME\|\
	SYPCR_SWRI\|SYPCR_SWP)
	#endif /* CONFIG_WATCHDOG */

	/*-----------------------------------------------------------------------
	* TMCNTSC - Time Counter Status and Control 4-40
	* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
	* and enable Time Counter
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 4-42
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
	* Periodic timer
	*/
	#define CONFIG_SYS_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock Control 9-8
	*-----------------------------------------------------------------------
	* Ensure DFBRG is Divide by 16
	*/
	#define CONFIG_SYS_SCCR 0

	/*-----------------------------------------------------------------------
	* RCCR - RISC Controller Configuration 13-7
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_RCCR 0

	/*-----------------------------------------------------------------------
	* Init Memory Controller:
	*
	* Bank Bus Machine PortSz Device
	* ---- --- ------- ------ ------
	* 0 60x GPCM 64 bit FLASH
	* 1 60x SDRAM 64 bit SDRAM
	*/

	#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) \| 0x0801)
	#define CONFIG_SYS_OR0_PRELIM 0xFF800882
	#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) \| 0x0041)
	#define CONFIG_SYS_OR1_PRELIM 0xF8002CD0

	#define CONFIG_SYS_PSDMR 0x404A241A
	#define CONFIG_SYS_MPTPR 0x00007400
	#define CONFIG_SYS_PSRT 0x00000007

	#endif /* __CONFIG_H */