| /* |
| * (C) Copyright 2013 |
| * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <gdsys_fpga.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| enum { |
| I2CINT_ERROR_EV = 1 << 13, |
| I2CINT_TRANSMIT_EV = 1 << 14, |
| I2CINT_RECEIVE_EV = 1 << 15, |
| }; |
| |
| enum { |
| I2CMB_WRITE = 1 << 10, |
| I2CMB_2BYTE = 1 << 11, |
| I2CMB_HOLD_BUS = 1 << 13, |
| I2CMB_NATIVE = 2 << 14, |
| }; |
| |
| static int wait_for_int(bool read) |
| { |
| u16 val; |
| unsigned int ctr = 0; |
| |
| FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| while (!(val & (I2CINT_ERROR_EV |
| | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { |
| udelay(10); |
| if (ctr++ > 5000) { |
| return 1; |
| } |
| FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| } |
| |
| return (val & I2CINT_ERROR_EV) ? 1 : 0; |
| } |
| |
| static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, |
| bool is_last) |
| { |
| u16 val; |
| |
| FPGA_SET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, I2CINT_ERROR_EV |
| | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV); |
| FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| |
| if (!read && len) { |
| val = buffer[0]; |
| |
| if (len > 1) |
| val |= buffer[1] << 8; |
| FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox_ext, val); |
| } |
| |
| FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox, |
| I2CMB_NATIVE |
| | (read ? 0 : I2CMB_WRITE) |
| | (chip << 1) |
| | ((len > 1) ? I2CMB_2BYTE : 0) |
| | (is_last ? 0 : I2CMB_HOLD_BUS)); |
| |
| if (wait_for_int(read)) |
| return 1; |
| |
| if (read) { |
| FPGA_GET_REG(I2C_ADAP_HWNR, i2c.read_mailbox_ext, &val); |
| buffer[0] = val & 0xff; |
| if (len > 1) |
| buffer[1] = val >> 8; |
| } |
| |
| return 0; |
| } |
| |
| static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) |
| { |
| int shift = (alen-1) * 8; |
| |
| while (alen) { |
| int transfer = MIN(alen, 2); |
| uchar buf[2]; |
| bool is_last = alen <= transfer; |
| |
| buf[0] = addr >> shift; |
| if (alen > 1) |
| buf[1] = addr >> (shift - 8); |
| |
| if (ihs_i2c_transfer(chip, buf, transfer, false, |
| hold_bus ? false : is_last)) |
| return 1; |
| |
| shift -= 16; |
| alen -= transfer; |
| } |
| |
| return 0; |
| } |
| |
| static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, |
| int alen, uchar *buffer, int len, bool read) |
| { |
| if (len <= 0) |
| return 1; |
| |
| if (ihs_i2c_address(chip, addr, alen, !read)) |
| return 1; |
| |
| while (len) { |
| int transfer = MIN(len, 2); |
| |
| if (ihs_i2c_transfer(chip, buffer, transfer, read, |
| len <= transfer)) |
| return 1; |
| |
| buffer += transfer; |
| addr += transfer; |
| len -= transfer; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) |
| { |
| #ifdef CONFIG_SYS_I2C_INIT_BOARD |
| /* |
| * Call board specific i2c bus reset routine before accessing the |
| * environment, which might be in a chip on that bus. For details |
| * about this problem see doc/I2C_Edge_Conditions. |
| */ |
| i2c_init_board(); |
| #endif |
| } |
| |
| static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip) |
| { |
| uchar buffer[2]; |
| |
| if (ihs_i2c_transfer(chip, buffer, 0, true, true)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, |
| int alen, uchar *buffer, int len) |
| { |
| return ihs_i2c_access(adap, chip, addr, alen, buffer, len, true); |
| } |
| |
| static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, |
| int alen, uchar *buffer, int len) |
| { |
| return ihs_i2c_access(adap, chip, addr, alen, buffer, len, false); |
| } |
| |
| static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap, |
| unsigned int speed) |
| { |
| if (speed != adap->speed) |
| return 1; |
| return speed; |
| } |
| |
| /* |
| * Register IHS i2c adapters |
| */ |
| #ifdef CONFIG_SYS_I2C_IHS_CH0 |
| U_BOOT_I2C_ADAP_COMPLETE(ihs0, ihs_i2c_init, ihs_i2c_probe, |
| ihs_i2c_read, ihs_i2c_write, |
| ihs_i2c_set_bus_speed, |
| CONFIG_SYS_I2C_IHS_SPEED_0, |
| CONFIG_SYS_I2C_IHS_SLAVE_0, 0) |
| #endif |
| #ifdef CONFIG_SYS_I2C_IHS_CH1 |
| U_BOOT_I2C_ADAP_COMPLETE(ihs1, ihs_i2c_init, ihs_i2c_probe, |
| ihs_i2c_read, ihs_i2c_write, |
| ihs_i2c_set_bus_speed, |
| CONFIG_SYS_I2C_IHS_SPEED_1, |
| CONFIG_SYS_I2C_IHS_SLAVE_1, 1) |
| #endif |
| #ifdef CONFIG_SYS_I2C_IHS_CH2 |
| U_BOOT_I2C_ADAP_COMPLETE(ihs2, ihs_i2c_init, ihs_i2c_probe, |
| ihs_i2c_read, ihs_i2c_write, |
| ihs_i2c_set_bus_speed, |
| CONFIG_SYS_I2C_IHS_SPEED_2, |
| CONFIG_SYS_I2C_IHS_SLAVE_2, 2) |
| #endif |
| #ifdef CONFIG_SYS_I2C_IHS_CH3 |
| U_BOOT_I2C_ADAP_COMPLETE(ihs3, ihs_i2c_init, ihs_i2c_probe, |
| ihs_i2c_read, ihs_i2c_write, |
| ihs_i2c_set_bus_speed, |
| CONFIG_SYS_I2C_IHS_SPEED_3, |
| CONFIG_SYS_I2C_IHS_SLAVE_3, 3) |
| #endif |