| /* |
| * Copyright (C) 2012 Samsung Electronics |
| * Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <power/pmic.h> |
| #include <power/max17042_fg.h> |
| #include <i2c.h> |
| #include <power/max8997_pmic.h> |
| #include <power/power_chrg.h> |
| #include <power/battery.h> |
| #include <power/fg_battery_cell_params.h> |
| #include <errno.h> |
| |
| static int fg_write_regs(struct pmic *p, u8 addr, u16 *data, int num) |
| { |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num; i++, addr++) |
| ret |= pmic_reg_write(p, addr, *(data + i)); |
| |
| return ret; |
| } |
| |
| static int fg_read_regs(struct pmic *p, u8 addr, u16 *data, int num) |
| { |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num; i++, addr++) |
| ret |= pmic_reg_read(p, addr, (u32 *) (data + i)); |
| |
| return ret; |
| } |
| |
| static int fg_write_and_verify(struct pmic *p, u8 addr, u16 data) |
| { |
| unsigned int val = data; |
| int ret = 0; |
| |
| ret |= pmic_reg_write(p, addr, val); |
| ret |= pmic_reg_read(p, addr, &val); |
| |
| if (ret) |
| return ret; |
| |
| if (((u16) val) == data) |
| return 0; |
| |
| return -1; |
| } |
| |
| static void por_fuelgauge_init(struct pmic *p) |
| { |
| u16 r_data0[16], r_data1[16], r_data2[16]; |
| u32 rewrite_count = 5, i = 0; |
| unsigned int val; |
| int ret = 0; |
| |
| /* Delay 500 ms */ |
| mdelay(500); |
| /* Initilize Configuration */ |
| pmic_reg_write(p, MAX17042_CONFIG, 0x2310); |
| |
| rewrite_model: |
| /* Unlock Model Access */ |
| pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_UNLOCK1); |
| pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_UNLOCK2); |
| |
| /* Write/Read/Verify the Custom Model */ |
| ret |= fg_write_regs(p, MAX17042_MODEL1, cell_character0, |
| ARRAY_SIZE(cell_character0)); |
| ret |= fg_write_regs(p, MAX17042_MODEL2, cell_character1, |
| ARRAY_SIZE(cell_character1)); |
| ret |= fg_write_regs(p, MAX17042_MODEL3, cell_character2, |
| ARRAY_SIZE(cell_character2)); |
| |
| if (ret) { |
| printf("%s: Cell parameters write failed!\n", __func__); |
| return; |
| } |
| |
| ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0)); |
| ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1)); |
| ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2)); |
| |
| if (ret) |
| printf("%s: Cell parameters read failed!\n", __func__); |
| |
| for (i = 0; i < 16; i++) { |
| if ((cell_character0[i] != r_data0[i]) |
| || (cell_character1[i] != r_data1[i]) |
| || (cell_character2[i] != r_data2[i])) |
| goto rewrite_model; |
| } |
| |
| /* Lock model access */ |
| pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_LOCK1); |
| pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_LOCK2); |
| |
| /* Verify the model access is locked */ |
| ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0)); |
| ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1)); |
| ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2)); |
| |
| if (ret) { |
| printf("%s: Cell parameters read failed!\n", __func__); |
| return; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(r_data0); i++) { |
| /* Check if model locked */ |
| if (r_data0[i] || r_data1[i] || r_data2[i]) { |
| /* Rewrite model data - prevent from endless loop */ |
| if (rewrite_count--) { |
| puts("FG - Lock model access failed!\n"); |
| goto rewrite_model; |
| } |
| } |
| } |
| |
| /* Write Custom Parameters */ |
| fg_write_and_verify(p, MAX17042_RCOMP0, RCOMP0); |
| fg_write_and_verify(p, MAX17042_TEMPCO, TempCo); |
| |
| /* Delay at least 350mS */ |
| mdelay(350); |
| |
| /* Initialization Complete */ |
| pmic_reg_read(p, MAX17042_STATUS, &val); |
| /* Write and Verify Status with POR bit Cleared */ |
| fg_write_and_verify(p, MAX17042_STATUS, val & ~MAX17042_POR); |
| |
| /* Delay at least 350 ms */ |
| mdelay(350); |
| } |
| |
| static int power_update_battery(struct pmic *p, struct pmic *bat) |
| { |
| struct power_battery *pb = bat->pbat; |
| unsigned int val; |
| int ret = 0; |
| |
| if (pmic_probe(p)) { |
| puts("Can't find max17042 fuel gauge\n"); |
| return -1; |
| } |
| |
| ret |= pmic_reg_read(p, MAX17042_VFSOC, &val); |
| pb->bat->state_of_chrg = (val >> 8); |
| |
| pmic_reg_read(p, MAX17042_VCELL, &val); |
| debug("vfsoc: 0x%x\n", val); |
| pb->bat->voltage_uV = ((val & 0xFFUL) >> 3) + ((val & 0xFF00) >> 3); |
| pb->bat->voltage_uV = (pb->bat->voltage_uV * 625); |
| |
| pmic_reg_read(p, 0x05, &val); |
| pb->bat->capacity = val >> 2; |
| |
| return ret; |
| } |
| |
| static int power_check_battery(struct pmic *p, struct pmic *bat) |
| { |
| struct power_battery *pb = bat->pbat; |
| unsigned int val; |
| int ret = 0; |
| |
| if (pmic_probe(p)) { |
| puts("Can't find max17042 fuel gauge\n"); |
| return -1; |
| } |
| |
| ret |= pmic_reg_read(p, MAX17042_STATUS, &val); |
| debug("fg status: 0x%x\n", val); |
| |
| if (val == MAX17042_POR) |
| por_fuelgauge_init(p); |
| |
| ret |= pmic_reg_read(p, MAX17042_VERSION, &val); |
| pb->bat->version = val; |
| |
| power_update_battery(p, bat); |
| debug("fg ver: 0x%x\n", pb->bat->version); |
| printf("BAT: state_of_charge(SOC):%d%%\n", |
| pb->bat->state_of_chrg); |
| |
| printf(" voltage: %d.%6.6d [V] (expected to be %d [mAh])\n", |
| pb->bat->voltage_uV / 1000000, |
| pb->bat->voltage_uV % 1000000, |
| pb->bat->capacity); |
| |
| if (pb->bat->voltage_uV > 3850000) |
| pb->bat->state = EXT_SOURCE; |
| else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5) |
| pb->bat->state = CHARGE; |
| else |
| pb->bat->state = NORMAL; |
| |
| return ret; |
| } |
| |
| static struct power_fg power_fg_ops = { |
| .fg_battery_check = power_check_battery, |
| .fg_battery_update = power_update_battery, |
| }; |
| |
| int power_fg_init(unsigned char bus) |
| { |
| static const char name[] = "MAX17042_FG"; |
| struct pmic *p = pmic_alloc(); |
| |
| if (!p) { |
| printf("%s: POWER allocation error!\n", __func__); |
| return -ENOMEM; |
| } |
| |
| debug("Board Fuel Gauge init\n"); |
| |
| p->name = name; |
| p->interface = PMIC_I2C; |
| p->number_of_regs = FG_NUM_OF_REGS; |
| p->hw.i2c.addr = MAX17042_I2C_ADDR; |
| p->hw.i2c.tx_num = 2; |
| p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG; |
| p->bus = bus; |
| |
| p->fg = &power_fg_ops; |
| return 0; |
| } |