board/sc3/sc3nand.c

/*
 * (C) Copyright 2007
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>

#if (CONFIG_COMMANDS & CFG_CMD_NAND)

#include <nand.h>
#include <asm/processor.h>

#define readb(addr)	*(volatile u_char *)(addr)
#define readl(addr)	*(volatile u_long *)(addr)
#define writeb(d,addr)	*(volatile u_char *)(addr) = (d)

#define SC3_NAND_ALE 29 /* GPIO PIN 3 */
#define SC3_NAND_CLE 30	/* GPIO PIN 2 */
#define SC3_NAND_CE  27 /* GPIO PIN 5 */

static void *sc3_io_base;
static void *sc3_control_base = (void *)0xEF600700;

static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
	switch (cmd) {
	case NAND_CTL_SETCLE:
		set_bit (SC3_NAND_CLE, sc3_control_base);
		break;
	case NAND_CTL_CLRCLE:
		clear_bit (SC3_NAND_CLE, sc3_control_base);
		break;

	case NAND_CTL_SETALE:
		set_bit (SC3_NAND_ALE, sc3_control_base);
		break;
	case NAND_CTL_CLRALE:
		clear_bit (SC3_NAND_ALE, sc3_control_base);
		break;

	case NAND_CTL_SETNCE:
		set_bit (SC3_NAND_CE, sc3_control_base);
		break;
	case NAND_CTL_CLRNCE:
		clear_bit (SC3_NAND_CE, sc3_control_base);
		break;
	}
}

static int sc3_nand_dev_ready(struct mtd_info *mtd)
{
	if (!(readl(sc3_control_base + 0x1C) & 0x4000))
		return 0;
	return 1;
}

static void sc3_select_chip(struct mtd_info *mtd, int chip)
{
	clear_bit (SC3_NAND_CE, sc3_control_base);
}

int board_nand_init(struct nand_chip *nand)
{
	nand->eccmode = NAND_ECC_SOFT;

	sc3_io_base = (void *) CFG_NAND_BASE;
	/* Set address of NAND IO lines (Using Linear Data Access Region) */
	nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
	nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
	/* Reference hardware control function */
	nand->hwcontrol  = sc3_nand_hwcontrol;
	nand->dev_ready  = sc3_nand_dev_ready;
	nand->select_chip = sc3_select_chip;
	return 0;
}
#endif