| /* |
| * (C) Copyright 2003-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004 |
| * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
| * |
| * (C) Copyright 2004 |
| * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de |
| * |
| * (C) Copyright 2008 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <fdt_support.h> |
| #include <mpc5xxx.h> |
| #include <pci.h> |
| #include <malloc.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| |
| #ifndef CONFIG_SYS_RAMBOOT |
| static void sdram_start (int hi_addr) |
| { |
| long hi_addr_bit = hi_addr ? 0x01000000 : 0; |
| |
| /* unlock mode register */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL, |
| (SDRAM_CONTROL | 0x80000000 | hi_addr_bit)); |
| __asm__ volatile ("sync"); |
| |
| /* precharge all banks */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL, |
| (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set mode register: extended mode */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE, (SDRAM_EMODE)); |
| __asm__ volatile ("sync"); |
| |
| /* set mode register: reset DLL */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE, |
| (SDRAM_MODE | 0x04000000)); |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* precharge all banks */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL, |
| (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); |
| __asm__ volatile ("sync"); |
| |
| /* auto refresh */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL, |
| (SDRAM_CONTROL | 0x80000004 | hi_addr_bit)); |
| __asm__ volatile ("sync"); |
| |
| /* set mode register */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE, (SDRAM_MODE)); |
| __asm__ volatile ("sync"); |
| |
| /* normal operation */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL, |
| (SDRAM_CONTROL | hi_addr_bit)); |
| __asm__ volatile ("sync"); |
| } |
| #endif |
| |
| /* |
| * ATTENTION: Although partially referenced initdram does NOT make real use |
| * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE |
| * is something else than 0x00000000. |
| */ |
| |
| phys_size_t initdram (int board_type) |
| { |
| ulong dramsize = 0; |
| ulong dramsize2 = 0; |
| uint svr, pvr; |
| |
| #ifndef CONFIG_SYS_RAMBOOT |
| ulong test1, test2; |
| |
| /* setup SDRAM chip selects */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG, 0x0000001c); /* 512MB at 0x0 */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, 0x80000000);/* disabled */ |
| __asm__ volatile ("sync"); |
| |
| /* setup config registers */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set tap delay */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY); |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* find RAM size using SDRAM CS0 only */ |
| sdram_start (0); |
| test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); |
| sdram_start(1); |
| test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); |
| if (test1 > test2) { |
| sdram_start (0); |
| dramsize = test1; |
| } else { |
| dramsize = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize < (1 << 20)) { |
| dramsize = 0; |
| } |
| |
| /* set SDRAM CS0 size according to the amount of RAM found */ |
| if (dramsize > 0) { |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG, |
| (0x13 + __builtin_ffs(dramsize >> 20) - 1)); |
| } else { |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ |
| } |
| |
| /* let SDRAM CS1 start right after CS0 */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, (dramsize + 0x0000001c));/*512MB*/ |
| |
| /* find RAM size using SDRAM CS1 only */ |
| if (!dramsize) |
| sdram_start (0); |
| test2 = test1 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000); |
| if (!dramsize) { |
| sdram_start (1); |
| test2 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000); |
| } |
| if (test1 > test2) { |
| sdram_start (0); |
| dramsize2 = test1; |
| } else { |
| dramsize2 = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize2 < (1 << 20)) { |
| dramsize2 = 0; |
| } |
| |
| /* set SDRAM CS1 size according to the amount of RAM found */ |
| if (dramsize2 > 0) { |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, |
| (dramsize | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1))); |
| } else { |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */ |
| } |
| |
| #else /* CONFIG_SYS_RAMBOOT */ |
| |
| /* retrieve size of memory connected to SDRAM CS0 */ |
| dramsize = in_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; |
| if (dramsize >= 0x13) { |
| dramsize = (1 << (dramsize - 0x13)) << 20; |
| } else { |
| dramsize = 0; |
| } |
| |
| /* retrieve size of memory connected to SDRAM CS1 */ |
| dramsize2 = in_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG) & 0xFF; |
| if (dramsize2 >= 0x13) { |
| dramsize2 = (1 << (dramsize2 - 0x13)) << 20; |
| } else { |
| dramsize2 = 0; |
| } |
| |
| #endif /* CONFIG_SYS_RAMBOOT */ |
| |
| /* |
| * On MPC5200B we need to set the special configuration delay in the |
| * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM |
| * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: |
| * |
| * "The SDelay should be written to a value of 0x00000004. It is |
| * required to account for changes caused by normal wafer processing |
| * parameters." |
| */ |
| svr = get_svr(); |
| pvr = get_pvr(); |
| if ((SVR_MJREV(svr) >= 2) && |
| (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { |
| |
| out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04); |
| __asm__ volatile ("sync"); |
| } |
| |
| return dramsize + dramsize2; |
| } |
| |
| int checkboard (void) |
| { |
| puts ("Board: MUC.MC-52 HW WDT "); |
| #if defined(CONFIG_HW_WATCHDOG) |
| puts ("enabled\n"); |
| #else |
| puts ("disabled\n"); |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_PREBOOT |
| |
| static uchar kbd_magic_prefix[] = "key_magic"; |
| static uchar kbd_command_prefix[] = "key_cmd"; |
| |
| #define S1_ROT 0xf0 |
| #define S2_Q 0x40 |
| #define S2_M 0x20 |
| |
| struct kbd_data_t { |
| char s1; |
| char s2; |
| }; |
| |
| struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) |
| { |
| kbd_data->s1 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS1_BASE); |
| kbd_data->s2 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS2_BASE); |
| |
| return kbd_data; |
| } |
| |
| static int compare_magic (const struct kbd_data_t *kbd_data, char *str) |
| { |
| char s1 = str[0]; |
| char s2; |
| |
| if (s1 >= '0' && s1 <= '9') |
| s1 -= '0'; |
| else if (s1 >= 'a' && s1 <= 'f') |
| s1 = s1 - 'a' + 10; |
| else if (s1 >= 'A' && s1 <= 'F') |
| s1 = s1 - 'A' + 10; |
| else |
| return -1; |
| |
| if (((S1_ROT & kbd_data->s1) >> 4) != s1) |
| return -1; |
| |
| s2 = (S2_Q | S2_M) & kbd_data->s2; |
| |
| switch (str[1]) { |
| case 'q': |
| case 'Q': |
| if (s2 == S2_Q) |
| return -1; |
| break; |
| case 'm': |
| case 'M': |
| if (s2 == S2_M) |
| return -1; |
| break; |
| case '\0': |
| if (s2 == (S2_Q | S2_M)) |
| return 0; |
| default: |
| return -1; |
| } |
| |
| if (str[2]) |
| return -1; |
| |
| return 0; |
| } |
| |
| static char *key_match (const struct kbd_data_t *kbd_data) |
| { |
| char magic[sizeof (kbd_magic_prefix) + 1]; |
| char *suffix; |
| char *kbd_magic_keys; |
| |
| /* |
| * The following string defines the characters that can be appended |
| * to "key_magic" to form the names of environment variables that |
| * hold "magic" key codes, i. e. such key codes that can cause |
| * pre-boot actions. If the string is empty (""), then only |
| * "key_magic" is checked (old behaviour); the string "125" causes |
| * checks for "key_magic1", "key_magic2" and "key_magic5", etc. |
| */ |
| if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) |
| kbd_magic_keys = ""; |
| |
| /* loop over all magic keys; |
| * use '\0' suffix in case of empty string |
| */ |
| for (suffix = kbd_magic_keys; *suffix || |
| suffix == kbd_magic_keys; ++suffix) { |
| sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); |
| |
| if (compare_magic(kbd_data, getenv(magic)) == 0) { |
| char cmd_name[sizeof (kbd_command_prefix) + 1]; |
| char *cmd; |
| |
| sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); |
| cmd = getenv (cmd_name); |
| |
| return (cmd); |
| } |
| } |
| |
| return (NULL); |
| } |
| |
| #endif /* CONFIG_PREBOOT */ |
| |
| int misc_init_r (void) |
| { |
| #ifdef CONFIG_PREBOOT |
| struct kbd_data_t kbd_data; |
| /* Decode keys */ |
| char *str = strdup (key_match (get_keys (&kbd_data))); |
| /* Set or delete definition */ |
| setenv ("preboot", str); |
| free (str); |
| #endif /* CONFIG_PREBOOT */ |
| |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), ' '); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), ' '); |
| |
| return 0; |
| } |
| |
| int board_early_init_r (void) |
| { |
| out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG, in_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG) & ~0x1); |
| out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_START, START_REG(CONFIG_SYS_FLASH_BASE)); |
| out_be32 ((unsigned __iomem *)MPC5XXX_CS0_START, START_REG(CONFIG_SYS_FLASH_BASE)); |
| out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_STOP, |
| STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)); |
| out_be32 ((unsigned __iomem *)MPC5XXX_CS0_STOP, |
| STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)); |
| return 0; |
| } |
| |
| int last_stage_init (void) |
| { |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), 'M'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), 'U'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), 'C'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), '.'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), 'M'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), 'C'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), '5'); |
| out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), '2'); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_HW_WATCHDOG) |
| #define GPT_OUT_0 0x00000027 |
| #define GPT_OUT_1 0x00000037 |
| void hw_watchdog_reset (void) |
| { |
| /* Trigger HW Watchdog with TIMER_0 */ |
| out_be32 ((unsigned __iomem *)MPC5XXX_GPT0_ENABLE, GPT_OUT_1); |
| out_be32 ((unsigned __iomem *)MPC5XXX_GPT0_ENABLE, GPT_OUT_0); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI |
| static struct pci_controller hose; |
| |
| extern void pci_mpc5xxx_init (struct pci_controller *); |
| |
| void pci_init_board (void) |
| { |
| pci_mpc5xxx_init (&hose); |
| } |
| #endif |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| } |
| #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ |